Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Synthesis of carbon supported ordered tetragonal pseudo-ternary Pt 2 M'M'' (M = Fe, Co, Ni) nanoparticles and their activity for oxygen reduction reaction

Alloying Pt with 3d transition metals has attracted much attention due to their reduced Pt content and reports of enhanced electrocatalytic activity for proton exchange membrane fuel cell applications. However, synthesizing ordered nanocrystalline intermetallics in the sub-10 nm range can be challenging. Here, we report on the co-reduction synthesis of ordered ternary Pt-base transition metal intermetallics with particle sizes in the regime of 3–5 nm. Since differences in the activity of PtM (M = Fe, Co, Ni) for oxygen reduction reaction (ORR) have been reported, we explored their combinations: Pt 2 FeCo, Pt 2 FeNi, and Pt 2 CoNi. These ternary intermetallic nanoparticles crystallized in P4/mmm space group upon annealing in a protective KCl matrix. The electrocatalysts were prepared by dispersing these intermetallics onto a carbon support using ethylene glycol and various sonication techniques. A combination of analytical techniques including powder X-ray diffraction, thermogravimetric analysis, electron microscopy and electrochemical methods have been used in this study. The oxygen reduction reaction activity and stability of the catalysts were tested in 0.1 M HClO 4 and 0.1 M H 2 SO 4 using cyclic voltammetry and rotating disk electrode voltammetry. The correlations between the composition, structure, morphology and activity of the intermetallics have been established and are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pr{sub 1.33}Pt{sub 4}Ga{sub 10}: Superstructure and magnetism

Pr{sub 1.33}Pt{sub 4}Ga{sub 10} crystals were prepared by Ga-flux method. The superstructure of this compound was studied by single-crystal X-ray diffraction (XRD), transmission electron microscopy (TEM), and diffuse X-ray scattering. Pr{sub 1.33}Pt{sub 4}Ga{sub 10} adopts the P6{sub 3}/mmc space group with a=b=4.3227(5) Å, c=16.485(3) Å: the structure features Pr{sub 2}Ga{sub 3} layers alternating with Pt{sub 2}Ga{sub 4} layers along the c-axis. TEM studies and pair distribution function (PDF) analysis of X-ray total scattering data show that Pr{sub 2}Ga{sub 3} layers possess an ordered superstructure (of dimension a′=a√(3)) in which Pr vacancies and Ga atoms are ordered within the ab-plane but disordered along the c-direction. PDF analysis also shows temperature-dependent structural features local to the Pr{sup 3+} ion. Magnetic measurements reveal that Pr{sup 3+} ions order ferrimagnetically below 12.5(2) K. - Graphical abstract: Left: Crystal structure of Pr{sub 1.33}Pt{sub 4}Ga{sub 10} showing Pr and Ga vacancies in the Pr{sub 2}Ga{sub 3} plane. Right: Tunneling electron microscopy (TEM) image of Pr{sub 1.33}Pt{sub 4}Ga{sub 10}. These vacancies have been studied using TEM and pair distribution function analysis. Magnetic measurements reveal that Pr{sup 3+} ions order ferrimagnetically below 7.8(2) K. - Highlights: • TEM studies indicate a superstructure from Pr and Ga vacancies. • Pair distribution function analyses may point to structural relaxation of vacancies. • Pr{sub 1.33}Pt{sub 4}Ga{sub 10} behaves as a ferromagnet and exhibits a metamagnetic transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixed valence and metamagnetism in a metal flux grown compound Eu{sub 2}Pt{sub 3}Si{sub 5}

A new compound Eu{sub 2}Pt{sub 3}Si{sub 5} with plate shaped morphology has been grown from excess In flux. The compound crystallizes in the orthorhombic U{sub 2}Co{sub 3}Si{sub 5} structure type, Ibam space group and the lattice parameters are a=10.007(2) Å, b=11.666(2) Å and c=6.0011(12) Å. The crystal structure of this compound can be conceived as inter-twinned chains of [Pt{sub 2}Si{sub 2}] and [PtSi{sub 3}] tetrahedra connected along [100] direction to give rise to a complex three dimensional [Pt{sub 3}Si{sub 5}] network. Temperature dependent magnetic susceptibility data suggests that Eu{sub 2}Pt{sub 3}Si{sub 5} undergoes a strong antiferromagnetic ordering (T{sub N}=19 K) followed by a weak ferromagnetic transition (T{sub C}=5.5 K). The effective magnetic moment/Eu obtained from susceptibility data is 6.78 μ{sub B} accounts mixed valent Eu with almost 85% divalent Eu, which is supported by X-ray absorption near edge spectroscopy. The compound undergoes a metamagnetic transition under applied magnetic field through a probable spin flop mechanism. - Graphical abstract: Eu{sub 2}Pt{sub 3}Si{sub 5}, a new member in the U{sub 2}Co{sub 3}Si{sub 5} (Ibam) family undergoes metamagnetic transition at high magnetic field and Eu is in mixed valence state. - Highlights: • A new compound Eu{sub 2}Pt{sub 3}Si{sub 5} has been synthesized using indium as an inactive metal flux. • The compound undergoes metamagnetic transition at higher field. • Eu in this compound resides in a mixed valence state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure/high-temperature synthesis and characterization of the first palladium or platinum containing lithium transition-metal sulfides Li{sub 2}M{sub 3}S{sub 4} (M=Pd, Pt)

The new lithium transition-metal sulfides Li{sub 2}M{sub 3}S{sub 4} (M=Pd, Pt) were obtained via multianvil high-pressure/high-temperature syntheses at 8 GPa and 1150 °C starting from a stoichiometric mixture of lithium nitride, sulfur, and palladium or platinum. Single crystal structure analyses indicated the space group P2{sub 1}/c (no. 14) with the following lattice parameters and refinement results: a=492.9(1), b=1005.9(2), c=614.9(2) pm, β=110.9 (1)°, R1=0.0165, wR2=0.0308 (all data) for Li{sub 2}Pd{sub 3}S{sub 4} and a=498.2(1), b=1005.5(2), c=613.0(2) pm, β=110.8(1)°, R1=0.0215, wR2=0.0450 (all data) for Li{sub 2}Pt{sub 3}S{sub 4}. The crystal structures are built up from two distinct Pd/Pt sites, one of which is a special position (0,0,0), two sulfur sites, and one lithium site. The atoms Pd2/Pt2 form isolated square planar PdS{sub 4}/PtS{sub 4} units, whereas the Pd1/Pt1 atoms form pairs of square planar PdS{sub 4}/PtS{sub 4} units, which are connected via a common edge. These two structural motives built up a three-dimensional network structure by linking through common corners. The lithium atoms are positioned inside of the so formed channels. Li{sub 2}M{sub 3}S{sub 4} (M=Pd, Pt) are isostructural to the minerals jaguéite, Cu{sub 2}Pd{sub 3}Se{sub 4} and chrisstanleyite, Ag{sub 2}Pd{sub 3}Se{sub 4}, which are up to now the only representatives of this structure type. Both compounds were studied with respect to their magnetic properties and can be classified as Pauli paramagnetic or diamagnetic. Regarding the possibility of lithium mobility inside the channels, of the structure, solid state {sup 7}Li NMR and high-temperature single crystal investigations revealed localization of the lithium atoms on their crystallographic sites. - Graphical abstract: The ternary lithium transition-metal sulfides Li{sub 2}M{sub 3}S{sub 4} (M=Pd, Pt) were prepared via multianvil high-pressure/high-temperature syntheses. They are built up from square planar PtS{sub 4}/PdS{sub 4} units with lithium located in the channels of the crystal structure. - Highlights: • Li{sub 2}M{sub 3}S{sub 4} (M=Pd, Pt) are the missing sulfide analogue compounds to Cu{sub 2}Pd{sub 3}Se{sub 4} and Ag{sub 2}Pd{sub 3}Se{sub 4}. • The compounds are the first Pd or Pt containing lithium transition-metal sulfides. • Li mobility was investigated via temp. dependent XRD and solid state {sup 7}Li NMR. • Magnetic properties revealed Pauli paramagnetic or diamagnetic contributions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compositionally graded Fe{sub (1−x)}-Pt{sub (x)} nanowires produced by alternating current electrodeposition into alumina templates

Fe{sub (1−x)}-Pt{sub (x)} (0<x<1) compositionally graded nanowires (50 nm in diameter and 1 µm in length) were fabricated by alternating current (AC) electrodeposition into nanoporous aluminum oxide templates through a systematic approach. The effect of AC electrodeposition parameters such as frequency, voltage and electrolyte concentration on morphology and chemical composition of Fe-Pt alloy nanowires was studied. Based on experimental data, AC sine wave deposition at an intermediate voltage of 12 V{sub rms} and a frequency of 50 Hz, produces nanowires with nearly stoichiometric composition (Fe{sub 42}Pt{sub 58}) and a reasonably good uniformity of pore filling. However, there is a gradual change of composition in Fe-Pt alloy nanowires along the length under certain AC parameters. The observed dependency of alloy composition on the deposition voltage and frequency of AC electrodeposition is explained by an interplay between reduction potentials and diffusion coefficients of Fe and Pt ions which makes FePt system able to access compositionally graded nanowires. Magnetic measurements of nanowires of as-deposited nanowires confirm that maximum coercivity of 1.55 kOe is observed for nearly stoichiometric composition which increases up to 1.81 kOe after thermal annealing at 550 °C. - Graphical abstract: Evaluation of synthesizing extrinsic parameters (such as deposition voltages and frequency) and intrinsic parameters (diffusion coefficient and reduction potential of ion species) in compositionally graded Fe{sub (1−x)}-Pt{sub (x)} nanowires prepared by alternating current electrodeposition into alumina templates.

36 MATERIALS SCIENCE↗

Fabrication of superhydrophobic Pt{sub 3}Fe/Fe surface for its application

Well-defined Pt{sub 3}Fe/Fe superhydrophobic materials on iron sheet with special properties, such as corrosion resistance, superhydrophobicity and superoleophilicity, was fabricated. The fabrication process involved etching in hydrochloric acid aqueous solution and simple replacement deposition process without using any seed and organic solvent, and then annealing. The electrochemical measurements show that the resultant surface in 3.5% sodium chloride solution displays good corrosion resistance. Also, it is proved that the obtained surface has better mechanical abrasion resistance via scratch test. The superoleophilicity and low water adhesion force of the obtained surface endow it high oil/water separation capacity. The as-prepared nanocomposites display enhanced catalytic activity and kinetics toward degradation of methyl orange. In particular, it possesses the most efficient degradation capacity (95%) towards methyl orange at a high concentration (17.5 mg/L) in 80 min. The improved stability and excellent catalytic activity of the Pt{sub 3}Fe/Fe nanocomposites promise new opportunities for the development of waste water treatment. - Graphical abstract: The illustration of application of superhydrophobic Pt{sub 3}Fe/Fe surface Display Omitted - Highlights: • Superhydrophobic Pt{sub 3}Fe/Fe composed was fabricated on iron sheet. • The growth process is without using any seed and organic solvent. • Superhydrophobic Pt{sub 3}Fe/Fe composed show superior oil/water separation capacity. • Superhydrophobic Pt{sub 3}Fe/Fe composed show high photocatalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancement of photocatalytic properties of Bi{sub 2}WO{sub 6} nanoparticles by Pt deposition

Graphical abstract: - Highlights: • Pt/Bi{sub 2}WO{sub 6} was used for photocatalytic degradation of methyl orange dye. • Photocatalytic degradation was dependent on wt% of Pt reaction time, and weight of catalyst. • Kinetic study revealed that the photocatalytic degradation of methyl orange dye followed the first order. • Catalyst re-use revealed the present photocatalyst remain effective and active after five cycles. - Abstract: Bi{sub 2}WO{sub 6} nanoparticles were prepared using a hydrothermal method, and Pt was immobilized on the surface of Bi{sub 2}WO{sub 6} via a photo-assisted deposition (PAD) method. The samples produced were characterized using X-ray diffraction, ultraviolet and visible spectroscopy, photoluminescence emission spectra, transmission electron microscopy, extended X-ray absorption fine structure, and surface area measurements. Furthermore, the catalytic performance of the Bi{sub 2}WO{sub 6} and Pt/Bi{sub 2}WO{sub 6} samples was examined in the degradation of methyl orange dye (MO) under visible light. The extended X-ray absorption fine structure (EXAFS) results, which showed the presence of peaks assigned to the Pt–Pt at approximately 2.50 Å, indicate the formation of nanoscale Pt features. The UV–vis spectral analysis detected a red shift after loading the Pt into the Bi{sub 2}WO{sub 6}. The maximum degradation efficiency achieved was 100% with 0.3 Pt/Bi{sub 2}WO{sub 6} as the photocatalyst after a 30-min reaction time. The catalyst could be reused without any loss in activity for the first five cycles.

36 MATERIALS SCIENCE↗

Highly porous ZnS microspheres for superior photoactivity after Au and Pt deposition and thermal treatment

Graphical abstract: Highly porous ZnS microsphere of size 2–5 μm having large surface area ca. 173.14 m{sup 2} g{sup −1} exhibits superior photocatalytic activity for the oxidation of 4-nitrophenol under UV light irradiation. The rate of photooxidation has been significantly improved by Au and Pt deposition and after sintering, respectively, due to rapid electron acceptance by metal from photoexcited ZnS and growth of crystalline ZnS phase. - Highlights: • Photoactive ZnS microsphere of size 2–5 μm was prepared by hydrothermal route. • Highly porous cubic spherical ZnS crystals possess a large surface area, 173 m{sup 2} g{sup −1}. • 1 wt% Au and Pt photodeposition highly quenched the photoluminescence at 437 nm. • Sintering and metal loading notably improve the photooxidation rate of 4-nitrophenol. • Pt co-catalyst always exhibits superior photoactivity of ZnS microsphere than Au. - Abstract: This work highlights the enhanced photocatalytic activity of porous ZnS microspheres after Au and Pt deposition and heat treatment at 500 °C for 2 h. Microporous ZnS particles of size 2–5 μm with large surface area 173.14 m{sup 2} g{sup −1} and pore volume 0.0212 cm{sup 3} g{sup −1} were prepared by refluxing under an alkaline medium. Photoluminescence of ZnS at 437 nm attributed to sulfur or zinc vacancies were quenched to 30% and 49%, respectively, after 1 wt% Au and Pt loading. SEM images revealed that each ZnS microparticle consist of several smaller ZnS spheres of size 2.13 nm as calculated by Scherrer's equation. The rate of photooxidation of 4-nitrophenol (10 μM) under UV (125 W Hg arc–10.4 mW/cm{sup 2}) irradiation has been significantly improved by Au and Pt deposition followed by sintering due to better electron capturing capacity of deposited metals and growth of crystalline ZnS phase with less surface defects.

36 MATERIALS SCIENCE↗

A comprehensive dosimetric study of pancreatic cancer treatment using three-dimensional conformal radiation therapy (3DCRT), intensity-modulated radiation therapy (IMRT), volumetric-modulated radiation therapy (VMAT), and passive-scattering and modulated-scanning proton therapy (PT)

With traditional photon therapy to treat large postoperative pancreatic target volume, it often leads to poor tolerance of the therapy delivered and may contribute to interrupted treatment course. This study was performed to evaluate the potential advantage of using passive-scattering (PS) and modulated-scanning (MS) proton therapy (PT) to reduce normal tissue exposure in postoperative pancreatic cancer treatment. A total of 11 patients with postoperative pancreatic cancer who had been previously treated with PS PT in University of Pennsylvania Roberts Proton Therapy Center from 2010 to 2013 were identified. The clinical target volume (CTV) includes the pancreatic tumor bed as well as the adjacent high-risk nodal areas. Internal (iCTV) was generated from 4-dimensional (4D) computed tomography (CT), taking into account target motion from breathing cycle. Three-field and 4-field 3D conformal radiation therapy (3DCRT), 5-field intensity-modulated radiation therapy, 2-arc volumetric-modulated radiation therapy, and 2-field PS and MS PT were created on the patients’ average CT. All the plans delivered 50.4 Gy to the planning target volume (PTV). Overall, 98% of PTV was covered by 95% of the prescription dose and 99% of iCTV received 98% prescription dose. The results show that all the proton plans offer significant lower doses to the left kidney (mean and V{sub 18} {sub Gy}), stomach (mean and V{sub 20} {sub Gy}), and cord (maximum dose) compared with all the photon plans, except 3-field 3DCRT in cord maximum dose. In addition, MS PT also provides lower doses to the right kidney (mean and V{sub 18} {sub Gy}), liver (mean dose), total bowel (V{sub 20} {sub Gy} and mean dose), and small bowel (V{sub 15} {sub Gy} absolute volume ratio) compared with all the photon plans and PS PT. The dosimetric advantage of PT points to the possibility of treating tumor bed and comprehensive nodal areas while providing a more tolerable treatment course that could be used for dose escalation and combining with radiosensitizing chemotherapy.

61 RADIATION PROTECTION AND DOSIMETRY↗

Surface Manipulation on Pt 2.2 Ni(111) Nanocatalysts for Boosting Their ORR Performance in Alkaline Media

We have previously shown that Pt–Ni alloy nano-octahedra with {111} facets exhibit outstanding electrochemical performance in the oxygen reduction reaction (ORR) in acidic media when their surfaces are finely tailored at the atomic level. Here, in this investigation, we further refine the surface structure of Pt 2.2 Ni octahedral nanocatalysts to improve ORR performance in a 0.1 M KOH solution using diverse surface manipulation techniques. Through systematic analysis using electrochemical CO stripping, cyclic voltammetry, and X-ray photoelectron spectroscopy, we examined the surfaces of Pt 2.2 Ni octahedral nanocatalysts pretreated with various methods, including etching in acetic acid or perchloric acid, and subsequent electrochemical activation in an alkaline solution or an acidic solution. Among these treatments, those involving acidic media, particularly electrochemical cycling in acidic electrolytes, demonstrated significantly enhanced ORR activity in 0.1 M KOH. The latter exhibited a mass activity of 2.95 A/mg pt and a specific activity of 8.71 mA/cm 2 at 0.90 V, surpassing state-of-the-art Pt/C by 12-fold and 34-fold, respectively. Furthermore, this identified nanocatalyst displayed robust stability, with negligible activity decay observed after 10,000 cycles. This study suggests that the improved ORR activity can be attributed to the Pt-rich surfaces with well-preserved {111} lattices on the surface-modified Pt–Ni nano-octahedra.

36 MATERIALS SCIENCE↗

Stability of Pt Skin Intermetallic Core Catalysts and Adsorption Properties for the Oxygen Reduction Reaction

Density functional theory calculations were used to determine the stability of metal slabs consisting of a Pt surface monolayer and intermetallic supporting layers made from combinations of six transition metal elements (Pt, Fe, Co, Ni, Cu, and Ag), as a model system for Pt skin intermetallic core nanoparticle catalysts. The stability of the slabs is largely determined by strain at the interface of the Pt skin and the subsurface intermetallic, which was described by a lattice matching parameter (r). The surface charge on the Pt skin was found to be correlated with the average electronegativity (EN) of the intermetallic core, so this average EN was used as a descriptor for how the electronic coupling (or ligand effect) affects adsorption energies. A total of 46 slabs were investigated in terms of their stability, from which 10 stable slabs were selected for further studies of adsorbate binding (OOH*, O*, and OH*) that are intermediates in the oxygen reduction reaction (ORR). The correlation between all three adsorption energies and descriptors r and EN was found. Using a linear fit between our descriptors and the calculated adsorption energies, the overpotential for the ORR was obtained as a function of r and EN, from which a volcano plot was produced. The volcano peak was found at r = 0.96 or at EN = 2.025. Interestingly, neither r nor EN was a sufficient single reactivity descriptor as the data points were well off the general trend in both linear fits; this implies that both the strain effect and the ligand effect influence the adsorption energies, although they are partly correlated. The (r, EN) target peak parameters were used to screen over 241 intermetallic combinations of transition metal elements as active ORR activity. In conclusion, this analysis identified 11 intermetallic compounds which can support a Pt skin to have a high predicted ORR activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ligand-Structure-Dependent Coherent Vibrational Wavepacket Dynamics in Pyrazolate-Bridged Pt(II) Dimers

Bimetallic transition metal complexes have gained increasing attention because of their versatile functions in solar energy conversion and photonics applications arising from inter-metal electronic coupling. In bimetallic platinum (Pt) complexes, electronic communication between the Pt-centered and ligand-centered moieties have been shown to be critical for defining their excited-state dynamic trajectories undergoing either localized ligand centered (LC)/metal-to-ligand-charge-transfer (MLCT) transitions or delocalized metal-metal-to-ligand-charge-transfer (MMLCT) transitions. The branching of the excited-state intersystem crossing (ISC) trajectories are modulated through structural factors that alter the relative energies of the different states. In this study, we investigated the correlation of the structural factors influencing the excited state trajectories. Using femtosecond broadband transient absorption (fs-BBTA) spectroscopy, ultrafast dynamics in the excited state of two select Pt(II) dimers have been mapped out using their coherent vibrational wavepacket signatures in corresponding transient absorption spectra. To examine how the ligand moieties of the Pt(II) dimers influence excited-state dynamics and the coherent vibrational wavepacket behavior, here we carried out comparative studies on two pyrazolate-bridged Pt(II) dimers of the general formula [Pt( t Bu 2 Pz)(N^C)] 2 ( t Bu 2 Pz = 3,5-di-tert-butylpyrazole); N^C = 7,8-benzoquinoline (bzq, 1) or 1-phenylisoquinoline (piq, 2)). We found that photoexcitation into the low energy absorption bands of 1 and 2 respectively induce the formation of 1 MMLCT states from which ultrafast ISC proceeds, resulting in stimulated emission quenching and decoherence of the vibrational wavepacket motions. The results obtained in this study suggest that both energetics and the structural rigidity of the aromatic cyclometalating ligands in 1 and 2 can significantly influence dynamics along the excited state trajectory characterized by dephasing of the coherent oscillations. The collective results provide direct evidence of how ligand structure alters electronic dynamics along excited state trajectories associated with ISC processes, providing insight into using ligand design to steer photochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Stability of Pt-Cu Single-Atom Alloy Catalysts: In Situ Characterization of the Pt/Cu(111) Surface in an Ambient Pressure of CO

The interaction between a catalyst and reactants often induce changes in the surface structure and composition of the catalyst, which, in turn, affect its reactivity. Therefore, it is important to study such changes using in situ techniques under well-controlled conditions. We have used ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to study the surface stability of a Pt/Cu(111) single atom alloy (SAA) in an ambient pressure of CO. By directly probing the Pt atoms, we found that CO causes a slight surface segregation of Pt atoms at room temperature. In addition, while the Pt/Cu(111) surface demonstrates poor thermal stability in UHV, where surface Pt starts to diffuse to the subsurface layer above 400 K, the presence of adsorbed CO enhances the thermal stability of surface Pt atoms. Furthermore, we also found that temperatures above 450 K cause a restructuring of the subsurface layer, which consequently strengthens the CO binding to the surface Pt sites, likely due to the presence of neighboring subsurface Pt atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Active Site and Electronic Structure Elucidation of Pt Nanoparticles Supported on Phase-Pure Molybdenum Carbide Nanotubes

Here, we recently showed that phase-pure molybdenum carbide nanotubes can be durable supports for platinum (Pt) nanoparticles in hydrogen evolution reaction (HER). In this paper we further characterize surface properties of the same Pt/β-Mo 2 C catalyst platform using carbon monoxide (CO)-Pt and CO-Mo 2 C bond strength of different Pt particle sizes in the <3 nm range. Results from diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and temporal analysis of products (TAP) revealed the existence of different active sites as Pt particle size increases. Correlation between the resultant catalyst activity and deposited Pt particle size was further investigated using water–gas-shift (WGS) as a probe reaction, suggesting that precise control of particle diameter and thickness is needed for optimized catalytic activity.

36 MATERIALS SCIENCE↗

Pt Nanoparticles on Atomic-Metal-Rich Carbon for Heavy-Duty Fuel Cell Catalysts: Durability Enhancement and Degradation Behavior in Membrane Electrode Assemblies

Proton exchange membrane fuel cells (PEMFCs) are a promising zero-emission power source for heavy-duty vehicles (HDVs). However, long-term durability of up to 25,000 h is challenging because current carbon support, catalyst, membrane, and ionomer developed for traditional light-duty vehicles cannot meet the stringent requirement. Therefore, understanding catalyst degradation mechanisms under the HDV condition is crucial for rationally designing highly active and durable platinum group metal (PGM) catalysts for high-performance membrane electrode assemblies (MEAs). Herein, we report a PGM catalyst consisting of platinum nanoparticles with a high content (40 wt %) on atomic-metal-site (e.g., MnN 4 )-rich carbon support. MEAs with the Pt (40 wt %)/Mn–N–C cathode catalyst achieved significantly enhanced performance and durability, generating 1.41 A cm –2 at 0.7 V under HDV conditions (0.25 mgPt cm –2 and 250 kPa abs pressure) and retaining 1.20 A cm –2 after an extended and accelerated stress test up to 150,000 voltage cycles. Electron microscopy studies indicate that most fine Pt nanoparticles are retained on or/and in the carbon support covered with the ionomer throughout the catalyst layer at the end of life. During the long-term stability test, the observed electrochemical active surface area reduction and performance loss primarily result from Pt depletion in the catalyst layer due to Pt dissolution and redeposition at the interface of the cathode and membrane. Importantly, the first-principle density functional theory calculations further reveal a support entrapment effect of the Mn–N–C, in which the MnN 4 site can specifically adsorb the Pt atom and further retard the Pt dissolution and migration, therefore enhancing long-term MEA durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Simple Bond-Additivity Model Explains Large Decreases in Heats of Adsorption in Solvents Versus Gas Phase: A Case Study with Phenol on Pt(111) in Water

Previously, we reported the low-coverage heat of adsorption of phenol on Pt(111) facets of a Pt wire in aqueous phase to be approximately 21 kJ/mol (relative to aqueous phenol) on the basis of measurements of the adsorption equilibrium constant. This is much smaller than the heat we reported for gas-phase phenol adsorption at this same low coverage on single-crystal Pt(111) under ultrahigh vacuum (200 kJ/mol) on the basis of adsorption calorimetry measurements. Here we quantitatively analyze the individual contributions that give rise to this 179 kJ/mol difference using a simple pairwise bond-additivity model, taking advantage of experimental data from the literature to estimate the bond energies. The dominant contribution to the lowering in heat when phenol is adsorbed in water is the energy cost to break the strong bond of liquid water to Pt(111) (~116 kJ per mole of phenol area). The water–phenol bonding is lost on one face of the phenol, and this costs ~50 kJ/mol, but this is nearly compensated by the new water–water bonding (~53 kJ/mol of phenol area). The results indicate that the intrinsic bond energy between phenol and Pt(111) is not very different in the gas versus the aqueous phase, provided one takes into consideration the expectation that water forces phenol into islands of high local coverage even at low average coverage (for the same reason that phenol has limited solubility in water). Furthermore, this explains the lack of a strong coverage dependence in the heat of adsorption when it is measured in aqueous phase, whereas it decreases by ~57 kJ/mol with coverage when it is measured in gas phase. This bond-additivity analysis presented here can be easily generalized to other adsorbates, surfaces, and solvents. It clarifies why catalysis with molecules such as phenol which have very strong bonding to Pt-group metals can proceed rapidly at room temperature in liquid solvents such as water but would never proceed in the gas phase at room temperature due to irreversible site poisoning.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Active and stable Ir@Pt core–shell catalysts for electrochemical oxygen reduction

Electrochemical oxygen reduction is an important reaction for many sustainable energy technologies, such as fuel cells and metal–air batteries. Kinetic limitations of this reaction, expensive electrocatalysts, and catalyst instability, however, limit the commercial viability of such devices. Herein, we report an active Ir@Pt core–shell catalyst that combines platinum overlayers with nanostructure effects to tune the oxygen binding to the Pt surface, thereby achieving enhanced activity and stability for the oxygen reduction reaction. Ir@Pt nanoparticles with several shell thicknesses were synthesized in a scalable, inexpensive, one-pot polyol method. Electrochemical analysis demonstrates the activity and stability of the Ir@Pt catalyst, with specific and mass activities increasing to 2.6 and 1.8 times that of commercial Pt/C (TKK), respectively, after 10 000 stability cycles. Furthermore, activity enhancement of the Ir@Pt catalyst is attributed to weakening of the oxygen binding to the Pt surface induced by the Ir core.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effects of Catalyst Processing on the Activity and Stability of Pt–Ni Nanoframe Electrocatalysts

Pt-based alloys have shown great promise as cathodic catalysts for cost-effective proton exchange membrane fuel cells. Post-synthesis treatment has been recognized as a critical step to improve the catalytic performance of Pt-based alloys. Here we present the effects of catalyst processing on the catalytic behavior of Pt-Ni nanoframe electrocatalysts in oxygen reduction reaction. The Pt-Ni nanoframes were made by corroding Ni-rich phase from solid rhombic dodecahedral particles. Three different corrosion procedures were compared. Among them, electrochemical corrosion led to the highest initial specific activity (1.35 mA cm -2 at 0.95 VRHE) by retaining more Ni in the nanoframes. However, the high activity gradually went down in a subsequent stability test due to continuous Ni loss and concomitant surface reconstruction. On the other hand, the best stability was achieved by a more aggressive corrosion using oxidative nitric acid. Although the initial activity was compromised, this procedure imparted a less-defective surface and thus the specific activity dropped by only 7% over 30,000 potential cycles. These results indicate a delicate trade-off between the activity and stability of Pt-Ni nanoframe electrocatalysts. The obtained understandings on how to balance the activity-stability trade-off via catalyst processing can be generalized to other Pt-based alloys.

36 MATERIALS SCIENCE↗