Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROPAGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Transition from sub-Rayleigh anticrack to supershear crack propagation in snow avalanches

Snow slab avalanches, characterized by a distinct, broad fracture line, are released following anticrack propagation in highly porous weak snow layers buried below cohesive slabs. The anticrack mechanism is driven by the volumetric collapse of the weak layer, which leads to the closure of crack faces and to the onset of frictional contact. Here, on the basis of snow fracture experiments, full-scale avalanche measurements and numerical simulations, we report the existence of a transition from sub-Rayleigh anticrack to supershear crack propagation. This transition follows the Burridge–Andrews mechanism, in which a supershear daughter crack nucleates ahead of the main fracture front and eventually propagates faster than the shear wave speed. Furthermore, we show that the supershear propagation regime can exist even if the shear-to-normal stress ratio is lower than the static friction coefficient as a result of the loss of frictional resistance during collapse. This finding shows that snow slab avalanches have fundamental similarities with strike-slip earthquakes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of density turbulence on helicon wave propagation in the core plasmas

Radio frequency wave propagation can be significantly affected by density irregularities, such as filaments in the scrape-off layer or instabilities in the core plasma. In this study, we examine the impact of edge turbulence on helicon wave propagation using the Petra-M simulation tool. To analyze the effect of edge turbulence, we utilize a realistic background plasma derived from XGC simulations, which includes spatial density fluctuations at the edge. This focus is particularly relevant for the DIII-D configuration, characterized by edge density turbulence of the core plasmas in a wide pedestal QH-mode. We focus on helicon wave propagation in the core plasma since the slow mode cannot propagate into the core plasma when the density is higher than the lower hybrid resonance, where a wide pedestal QH-mode occurs. The simulation results indicate that edge density fluctuations have a substantial impact on helicon wave coupling due to scattering in the core. We specifically demonstrate that the toroidal mode number and the level of density fluctuations are significant factors influencing scattering. While we have minimized the excitation of slow modes from the antenna, we still observe mode-converted slow modes resulting from the incoming helicon waves. The insights derived from these simulations will inform upcoming tokamak experiments regarding helicon antenna coupling in long pulse scenarios.

Kim, Eun-Hwa [Princeton Plasma Physics Laboratory ↗

Propagation of ultrashort laser pulses in optically ionized gases

Propagation of 800 nm, 120 fs laser pulses with intensities of 4x10{sup 16} W/cm{sup 2} in supersonic gas jets of N{sub 2} and H{sub 2} is studied using a shear-type interferometer. The plasma density distribution resulting from photoionization is resolved in space and time with simultaneously measured initial neutral density distribution. A distinct difference in laser beam propagation distance is observed when comparing propagation in jets of H{sub 2} and N{sub 2}. This is interpreted in terms of ionization induced refraction, which is stronger when electrons are produced from states of higher ionization potential. Three dimensional particle-in-cell simulations, based on directly solving the Maxwell-Lorentz system of equations, show the roles played by the forward Raman and ionization scattering instabilities, which further affect the propagation distance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Release of Trapped Gases from Amorphous Solid Water Films: I. “Top-Down” Crystallization-Induced Crack Propagation Probed using the Molecular Volcano

In this (Paper I) and the companion paper (Paper II) we investigate the mechanisms for the release of trapped gases from underneath of amorphous solid water (ASW) films. In prior work, we reported the episodic release of trapped gases in concert with the crystallization ASW, a phenomenon that we termed the "molecular volcano". The observed abrupt desorption is due to the formation of cracks that span the film to form a connected pathway for release. In this paper we utilize the "molecular volcano" desorption peak to characterize the formation of crystallization-induced cracks. We find that the crack length and distribution are independent of the trapped gas (Ar, Kr, Xe, CH4, N2, O2 or CO). Selective placement of the inert gas layer is used to show that cracks form near the top of the film and propagate downward into the film. Isothermal experiments reveal that, after some induction time, cracks propagate linearly in time with an Arrhenius dependent velocity corresponding to an activation energy of 54 kJ/mol. This value is consistent with the crystallization growth rate reported by others and establishes a direct connection between crystallization growth rate and the crack propagation rate. A two-step model in which nucleation and crystallization occurs in an induction zone near the top of the film followed by the propagation of a crystallization/crack front into the film is in good agreement with the temperature programmed desorption results.

Environmental Molecular Sciences Laboratory↗

Atmospheric pressure He-air plasma jet: Breakdown process and propagation phenomenon

In this paper He-discharge (plasma jet/bullet) in atmospheric pressure air and its progression phenomenon has been studied experimentally using ICCD camera, optical emission spectroscopy (OES) and calibrated dielectric probe measurements. The repetitive nanosecond pulse has applied to a plasma pencil to generate discharge in the helium gas channel. The discharge propagation speed was measured from the ICCD images. The axial electric field distribution in the plasma jet is inferred from the optical emission spectroscopic data and from the probe measurement. The correlation between the jet velocities, jet length with the pulse duration is established. It shows that the plasma jet is not isolated from the input voltage along its propagation path. The discharge propagation speed, the electron density and the local and average electric field distribution along the plasma jet axis predicted from the experimental results are in good agreement with the data predicted by numerical simulation of the streamer propagation presented in different literatures. The ionization phenomenon of the discharge predicts the key ionization parameters, such as speed, peak electric field in the front, and electron density. The maximum local electric field measured by OES is 95 kV/cm at 1.3 cm of the jet axis, and average EF measured by probe is 24 kV/cm at the same place of the jet. The average and local electron density estimated are in the order of 10{sup 11} cm{sup -3} and it reaches to the maximum of 10{sup 12} cm{sup -3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A primitive kinetic-fluid model for quasi-parallel propagating magnetohydrodynamic waves

The extension and limitation of the existing one-dimensional kinetic-fluid model (Vlasov-MHD (magnetohydrodynamic) model), which has been used to analyze parametric instabilities of parallel propagating Alfvén waves, are discussed. The inconsistency among the given velocity distribution functions in the past studies is resolved through the systematic derivation of the multi-dimensional Vlasov-MHD model. The linear dispersion analysis of the present model indicates that the collisionless damping of the slow modes is adequately evaluated in low beta plasmas, although the deviation between the present model and the full-Vlasov theory increases with increasing plasma beta and increasing propagation angle. This is because the transit-time damping is not correctly evaluated in the present model. It is also shown that the ponderomotive density fluctuations associated with the envelope-modulated quasi-parallel propagating Alfvén waves derived from the present model is not consistent with those derived from the other models such as the Landau-fluid model, except for low beta plasmas. The result indicates the present model would be useful to understand the linear and nonlinear development of the Alfvénic turbulence in the inner heliosphere, whose condition is relatively low beta, while the existing model and the present model are insufficient to discuss the parametric instabilities of Alfvén waves in high beta plasmas and the obliquely propagating waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stimulated Raman scattering of beat wave of two counter-propagating X-mode lasers in a magnetized plasma

Effects of transverse static magnetic field on stimulated Raman scattering (SRS) of the beat wave excited by two counter-propagating lasers are studied. Two counter-propagating lasers with frequency difference, ω{sub 1}∼ω{sub 2}≥2ω{sub p}, drive a non resonant space charge beat mode at wave number k{sup →}{sub 0}≈k{sup →}{sub 1}+k{sup →}{sub 2} in a plasma, where k{sup →}{sub 1} and k{sup →}{sub 2} are wave vectors of lasers having frequencies ω{sub 1} and ω{sub 2}, respectively. The driven beat wave acts as a pump for SRS and excites parametrically a pair of plasma wave (ω,k{sup →}) and side band electromagnetic wave (ω{sub 3},k{sup →}{sub 3}) propagating in the sideward direction in such a way that momentum remains conserved. The growth rate of Raman process is maximum for side scattering at θ{sub s}=π/2 for lower values of applied magnetic field (∼1 kG), which can be three fold by applying magnetic field ∼5.0 kG. Thus, optimum value of magnetic field can be utilized to achieve maximum electron acceleration in counter propagating geometry of beat wave acceleration by reducing the growth rate of Raman process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Oblique propagation of dust ion-acoustic solitary waves in a magnetized dusty pair-ion plasma

We investigate the propagation characteristics of electrostatic waves in a magnetized pair-ion plasma with immobile charged dusts. It is shown that obliquely propagating (OP) low-frequency (in comparison with the negative-ion cyclotron frequency) long-wavelength “slow” and “fast” modes can propagate, respectively, as dust ion-acoustic (DIA) and dust ion-cyclotron (DIC)-like waves. The properties of these modes are studied with the effects of obliqueness of propagation (θ), the static magnetic field, the ratios of the negative to positive ion masses (m), and temperatures (T) as well as the dust to negative-ion number density ratio (δ). Using the standard reductive perturbation technique, we derive a Korteweg-de Vries (KdV) equation which governs the evolution of small-amplitude OP DIA waves. It is found that the KdV equation admits only rarefactive solitons in plasmas with m well below its critical value m{sub c} (≫ 1) which typically depends on T and δ. It is shown that the nonlinear coefficient of the KdV equation vanishes at m = m{sub c}, i.e., for plasmas with much heavier negative ions, and the evolution of the DIA waves is then described by a modified KdV (mKdV) equation. The latter is shown to have only compressive soliton solution. The properties of both the KdV and mKdV solitons are studied with the system parameters as above, and possible applications of our results to laboratory and space plasmas are briefly discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dense electron-positron plasmas and gamma-ray bursts generation by counter-propagating quantum electrodynamics-strong laser interaction with solid targets

We use quantum electrodynamics (QED) particle-in-cell simulations to investigate and compare the generation of dense electron-positron plasmas and intense γ-ray bursts in the case of counter-propagating laser solid interaction (two-side irradiation) and single laser solid interaction (one-side irradiation). In the case of counter-propagating linearly polarized laser pulses irradiating a thin aluminum foil with each pulse peak power of 12.5 PW (I = 4 × 10{sup 23 }W/cm{sup 2}), we calculate that about 20% of the laser energy is converted into a burst of γ-rays with flux exceeding 10{sup 14 }s.{sup −1} This would be one of the most intense γ-ray sources among those currently available in laboratories. The γ-ray conversion efficiency in the case of two-side irradiation is three times higher than in the case of one-side irradiation using a single 12.5 PW laser. Dense electron-positron plasma with a maximum density of 6 × 10{sup 27 }m{sup −3} are generated simultaneously during the two-side irradiation which is eightfold denser compared to the one-side irradiation. The enhancement of the effects in the case of counter-propagating lasers are the results of the symmetrical compression of the foil target and the formation of electric potential and standing wave around the target. Realizing experimentally the proposed counter-propagating QED-strong laser-solid interaction to produce dense electron-positron pairs and prolific γ-rays will be made possible by the Extreme Light Infrastructure-Nuclear Physics facility under construction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The density and velocity of plasma bullets propagating along one dielectric tube

This study shows that the propagation of plasma bullets along one dielectric tube is strongly affected by many discharge parameters, such as the waveform of applied voltage (AC or pulsed DC), peak voltage, He flow rate, and the frequency of AC voltage. Analysis indicates that the density and velocity of plasma bullets are mainly determined by the electric field at the front of plasma bullets. These discharge parameters may significantly influence the distribution of plasma potential along the tube, thus control the electric field at the front of plasma bullets and their propagation. An increase in the pulsed DC voltage with its rise time of <40-50 ns can lead to an obvious improvement in the electric field at the front of plasma bullets, resulting in generation of a plasma in the high density gas and a fast propagation of plasma bullets. He flowing through the tube can contribute to the surface diffusion of charged species, and greatly increase the electric field at the front of plasma bullets. During the propagation of plasma bullets, their density is decreased due to the surface recombination of charged species, such as electrons and ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GPU simulation of nonlinear propagation of dual band ultrasound pulse complexes

In a new method of ultrasound imaging, called SURF imaging, dual band pulse complexes composed of overlapping low frequency (LF) and high frequency (HF) pulses are transmitted, where the frequency ratio LF:HF ∼ 1 : 20, and the relative bandwidth of both pulses are ∼ 50 − 70%. The LF pulse length is hence ∼ 20 times the HF pulse length. The LF pulse is used to nonlinearly manipulate the material elasticity observed by the co-propagating HF pulse. This produces nonlinear interaction effects that give more information on the propagation of the pulse complex. Due to the large difference in frequency and pulse length between the LF and the HF pulses, we have developed a dual level simulation where the LF pulse propagation is first simulated independent of the HF pulse, using a temporal sampling frequency matched to the LF pulse. A separate equation for the HF pulse is developed, where the the presimulated LF pulse modifies the propagation velocity. The equations are adapted to parallel processing in a GPU, where nonlinear simulations of a typical HF beam of 10 MHz down to 40 mm is done in ∼ 2 secs in a standard GPU. This simulation is hence very useful for studying the manipulation effect of the LF pulse on the HF pulse.

42 ENGINEERING↗

A transmission line model for propagation in elliptical core optical fibers

The calculation of mode propagation constants of elliptical core fibers has been the purpose of extended research leading to many notable methods, with the classic step index solution based on Mathieu functions. This paper seeks to derive a new innovative method for the determination of mode propagation constants in single mode fibers with elliptic core by modeling the elliptical fiber as a series of connected coupled transmission line elements. We develop a matrix formulation of the transmission line and the resonance of the circuits is used to calculate the mode propagation constants. The technique, used with success in the case of cylindrical fibers, is now being extended for the case of fibers with elliptical cross section. The advantage of this approach is that it is very well suited to be able to calculate the mode dispersion of arbitrary refractive index profile elliptical waveguides. The analysis begins with the deployment Maxwell’s equations adjusted for elliptical coordinates. Further algebraic analysis leads to a set of equations where we are faced with the appearance of harmonics. Taking into consideration predefined fixed number of harmonics simplifies the problem and enables the use of the resonant circuits approach. According to each case, programs have been created in Matlab, providing with a series of results (mode propagation constants) that are further compared with corresponding results from the ready known Mathieu functions method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effects of microstructure on propagation of laser-driven radiative heat waves in under-dense high-Z plasma

This work was motivated by previous findings that the measured laser-driven heat front propagation velocity in under-dense TiO 2 /SiO 2 foams is slower than the simulated one [Pérez et al., Phys. Plasmas 21, 023102 (2014)]. In attempting to test the hypothesis that these differences result from effects of the foam microstructure, we designed and conducted an experiment on the GEKKO laser using an x-ray streak camera to compare the heat front propagation velocity in “equivalent” gas and foam targets, that is, targets that have the same initial density, atomic weight, and average ionization state. In this article, we first discuss the design and the results of this comparison experiment. To supplement the x-ray streak camera data, we designed and conducted an experiment on the Trident laser using a new high-resolution, time-integrated, spatially resolved crystal spectrometer to image the Ti K-shell spectrum along the laser-propagation axis in an under-dense TiO 2 /SiO 2 foam cylinder. We discuss the details of the design of this experiment, and present the measured Ti K-shell spectra compared to the spectra simulated with a detailed superconfiguration non-LTE atomic model for Ti incorporated into a 2D radiation hydrodynamic code. Finally, we show that there is indeed a microstructure effect on heat front propagation in under-dense foams, and that the measured heat front velocities in the TiO 2 /SiO 2 foams are consistent with the analytical model of Gus'kov et al. [Phys. Plasmas 18, 103114 (2011)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory of ignition and burn propagation in inertial fusion implosions

A detailed analytic model is presented here to investigate the physics of burn propagation in inertially confined plasmas. The onset of ignition and burn propagation occurs when alpha heating of the hot spot causes rapid ablation of shell mass into the hot spot. This allows large energy gains to be achieved since most of the fuel mass is located in the shell. Here, we first present a comprehensive review of previous analytic models that have been used to describe the physics of hot-spot evolution and ignition; we then show that a proper description of a propagating burn wave requires a comprehensive model of hot spot and shell evolution that includes proper mass conservation in the shell, fusion reactivity, and fuel depletion. The analytic theory is in good agreement with detailed radiation-hydrodynamic simulations that predict the onset of burn propagation as occurring when the yield enhancement caused by alpha heating is between 15- and 25-fold, $f_α$ ~ 1.4, where $f_α$ = alpha energy deposited/hot-spot energy at bang time, and the hot-spot burnup fraction is approximately 2%. We show that the definition of ignition is not sensitive to the alpha-particle stopping power nor asymmetries provided that the absorbed fraction of alpha particles $θ_α$ is correctly accounted for. Finally, we use the results of 2-D simulations to show that even when $θ_α$ is small and unknown (as is true in hot spots with mid modes that have significant leakage of alpha particles into the surrounding cold bubbles), one can still relate the experimentally measureable parameter $\chi^{53}_α$ to the yield amplification and the burning-plasma parameter $Q^{\text{hs}}_α$ = alpha energy deposited/total input work delivered to the hot spot

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron backscatter edges as a diagnostic of burn propagation

High gain in hotspot-ignition inertial confinement fusion (ICF) implosions requires the propagation of thermonuclear burn from a central hotspot to the surrounding cold dense fuel. As ICF experiments enter the burning plasma regime, diagnostic signatures of burn propagation must be identified. In previous work [A. J. Crilly et al., Phys. Plasmas 27(1), 012701 (2020)], it has been shown that the spectral shape of the neutron backscatter edges is sensitive to the dense fuel hydrodynamic conditions. The backscatter edges are prominent features in the ICF neutron spectrum produced by the 180° scattering of primary deuterium–tritium fusion neutrons from ions. In this work, synthetic neutron spectra from radiation-hydrodynamics simulations of burning ICF implosions are used to assess the backscatter edge analysis in a propagating burn regime. Significant changes to the edge's spectral shape are observed as the degree of burn increases, and a simplified analysis is developed to infer scatter-averaged fluid velocity and temperature. The backscatter analysis offers direct measurement of the increased dense fuel temperatures that result from burn propagation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Inner heliospheric evolution of a 'STEALTH' CME derived from multi-view imaging and multipoint in situ observations. I. Propagation to 1 AU

Coronal mass ejections (CMEs) are the main driver of space weather. Therefore, a precise forecasting of their likely geo-effectiveness relies on an accurate tracking of their morphological and kinematical evolution throughout the interplanetary medium. However, single viewpoint observations require many assumptions to model the development of the features of CMEs. The most common hypotheses were those of radial propagation and self-similar expansion. The use of different viewpoints shows that, at least for some cases, those assumptions are no longer valid. From radial propagation, typical attributes that can now be confirmed to exist are over-expansion and/or rotation along the propagation axis. Understanding the 3D development and evolution of the CME features will help to establish the connection between remote and in situ observations, and hence help forecast space weather. We present an analysis of the morphological and kinematical evolution of a STEREO-B-directed CME on 2009 August 25-27. By means of a comprehensive analysis of remote imaging observations provided by the SOHO, STEREO, and SDO missions, and in situ measurements recorded by Wind, ACE, and MESSENGER, we prove in this paper that the event exhibits signatures of deflection, which are usually associated with changes in the direction of propagation and/or also with rotation. The interaction with other magnetic obstacles could act as a catalyst of deflection or rotation effects. We also propose a method to investigate the change of the CME tilt from the analysis of height-time direct measurements. If this method is validated in further work, it may have important implications for space weather studies because it will allow for inference of the interplanetary counterpart of the CME's orientation.

79 ASTRONOMY AND ASTROPHYSICS↗

MODELING OF REFLECTIVE PROPAGATING SLOW-MODE WAVE IN A FLARING LOOP

Quasi-periodic propagating intensity disturbances have been observed in large coronal loops in extreme ultraviolet images over a decade, and are widely accepted to be slow magnetosonic waves. However, spectroscopic observations from Hinode/EIS revealed their association with persistent coronal upflows, making this interpretation debatable. We perform a 2.5D magnetohydrodynamic simulation to imitate the chromospheric evaporation and the following reflected patterns in a flare loop. Our model encompasses the corona, transition region, and chromosphere. We demonstrate that the quasi periodic propagating intensity variations captured by the synthesized Solar Dynamics Observatory/Atmospheric Imaging Assembly 131, 94 Å emission images match the previous observations well. With particle tracers in the simulation, we confirm that these quasi periodic propagating intensity variations consist of reflected slow mode waves and mass flows with an average speed of 310 km s{sup −1} in an 80 Mm length loop with an average temperature of 9 MK. With the synthesized Doppler shift velocity and intensity maps of the Solar and Heliospheric Observatory/Solar Ultraviolet Measurement of Emitted Radiation Fe xix line emission, we confirm that these reflected slow mode waves are propagating waves.

79 ASTRONOMY AND ASTROPHYSICS↗

The role of active region coronal magnetic field in determining coronal mass ejection propagation direction

We study the role of the coronal magnetic field configuration of an active region (AR) in determining the propagation direction of a coronal mass ejection (CME). The CME occurred in the AR 11944 (S09W01) near the disk center on 2014 January 7 and was associated with an X1.2 flare. A new CME reconstruction procedure based on a polarimetric technique is adopted, which shows that the CME changed its propagation direction by around 28° in latitude within 2.5 R{sub ⊙} and 43° in longitude within 6.5 R{sub ⊙} with respect to the CME source region. This significant non-radial motion is consistent with the finding of Möstl et al. We use nonlinear force-free field and potential field source surface extrapolation methods to determine the configurations of the coronal magnetic field. We also calculate the magnetic energy density distributions at different heights based on the extrapolations. Our results show that the AR coronal magnetic field has a strong influence on the CME propagation direction. This is consistent with the “channeling” by the AR coronal magnetic field itself, rather than deflection by nearby structures. These results indicate that the AR coronal magnetic field configuration has to be taken into account in order to determine CME propagation direction correctly.

79 ASTRONOMY AND ASTROPHYSICS↗