Add a Pinch of Tetrel: The Transformation of a Centrosymmetric Metal into a Nonsymmorphic and Chiral
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Abstract Two novel cyclic Al 3 clusters, Li 2 [Al 3 (PR 2 ) 6 ] ⋅ 2(Et 2 O) [R=Ph ( 1 ), Cy ( 2 )] were synthesized through salt metathesis of metastable AlCl ⋅ (Et 2 O) n solutions with LiPR 2 . Both complexes were characterized by single crystal X‐Ray diffraction and their solid state and electronic structures are compared to previously reported cyclic Al 3 clusters. Compounds 1 and 2 were further characterized using density functional theory (DFT) methods to understand the nature of the free electron and the three‐center two‐electron Al−Al bonds. Calculations revealed that both clusters are influenced by pseudo Jahn‐Teller distortion and are likely in equilibrium between two low energy bonding states. The solid‐state structures of 1 and 2 are unique among Al 3 clusters, while the electronic structure is similar to the previously reported [Si t 4 Al 3 ]. In aluminum chemistry, 1 and 2 are rare examples of clusters containing isoelectronic cores in different ligand environments. The effects of the phosphide ligand sphere and strongly coordinated lithium atoms are discussed in detail.
In this study, the progress in integration of nanodiamond with photonic devices is analyzed in the light of quantum optical applications. Nanodiamonds host a variety of optically active defects, called color centers, which provide rich ground for photonic engineering. Theoretical introduction describing light and matter interaction between optical modes and a quantum emitter is presented, including the role of the Debye–Waller factor typical of color center emission. The synthesis of diamond nanoparticles is discussed in an overview of methods leading to experimentally realized hybrid platforms of nanodiamond with gallium phosphide, silicon dioxide, and silicon carbide. The trade-offs in the substrate index of refraction values are reviewed in the context of the achieved strength of light and matter interaction. Thereby, the recent results on the growth of color center-rich nanodiamond on prefabricated silicon carbide microdisk resonators are presented. Lastly, these hybrid devices achieve up to fivefold enhancement of the diamond color-center light emission and can be employed in integrated quantum photonics.
The authors present a manufacturing cost analysis for producing thin-film indium phosphide modules by combining a novel thin-film vapor-liquid-solid (TF-VLS) growth process with a standard monolithic module platform. The example cell structure is ITO/n-TiO2/p-InP/Mo. For a benchmark scenario of 12% efficient modules, the module cost is estimated to be $0.66/W(DC) and the module cost is calculated to be around $0.36/W(DC) at a long-term potential efficiency of 24%. The manufacturing cost for the TF-VLS growth portion is estimated to be ~$23/m2, a significant reduction compared with traditional metalorganic chemical vapor deposition. The analysis here suggests the TF-VLS growth mode could enable lower-cost, high-efficiency III-V photovoltaics compared with manufacturing methods used today and open up possibilities for other optoelectronic applications as well.
Lithium-rich Li[Li1/6Fe1/6Ni1/6Mn1/2]O2(0.4Li2MnO3-0.6LiFe1/3Ni1/3Mn1/3O2, LFNMO) is a new member of the xLi2MnO3·(1-x)LiMO2 family of high capacity - high voltage LIB cathodes. Unfortunately, it suffers from the severe degradation during cycling both in terms of reversible capacity and operating voltage. We are the first to document the corresponding degradation occurring in LFNMO at an atomic scale using aberration- corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) , as well as tracing the elemental crossover to the Li metal anode using XPS. We also demonstrate that a phosphate coating significantly boosts LFNMO cycling stability and rate capability. Due to cycling, the unmodified LFNMO undergoes extensive elemental dissolution (especially Mn) and O loss, forming Kirkendall-type voids. The associated structural degradation is from the as-synthesized R-3m layered structure to a disordered rock-salt phase. Prior to cycling, the phosphate coating shares the crystallography of the parent material. During cycling, a 2-3 nm thick disordered Co-based rock-salt structure is formed on the Mod-LFNMO surface, while the bulk material retains R-3m crystallography. Electrochemical impedance spectroscopy (EIS) analysis highlights how the phosphide treatment stabilizes the charge transfer resistance (RCT), the CEI resistance (RCEI), and the lithium ion diffusion coefficient (DLi). XPS analysis demonstrates that the coating also reduces the amount of cross-over Mn, Fe and especially Ni deposited on the Li metal anode, which is expected to lead to a more stable SEI layer during cycling. These combined cathode - anode findings significantly advance the microstructural design principles for next generation Li-rich cathode materials and coatings.
This special issue of Topics in Catalysis honors Professor S. Ted Oyama for his Awards in Petroleum Chemistry and Fuel Science Research. These awards were celebrated at two American Chemical Society (ACS) symposia in 2014. First, the ACS’s Distinguished Research Award in Petroleum Chemistry Symposium, took place at the 247th ACS National Meeting in Dallas, TX, during March 17-19, 2014 and the second one, the ACS’s Storch Award in Fuel Science Symposium, took place at the 248th ACS National Meeting in San Francisco, CA, during August 10-12, 2014. Professor Oyama received the 2014 ACS Distinguished Research Award in Petroleum Chemistry ‘‘for his substantial contributions to the field of heterogeneous catalysis’’ including the discovery of highly active transition metal phosphide catalysts for hydrotreatment of petroleum and coal-derived feedstocks and biomass refining, the development of new compositions, and the understanding of their reaction mechanisms by in situ spectroscopic techniques at high temperatures and pressures of reaction. In light of this recognition, Professor Oyama was also awarded the 2014 ACS Storch Award in Fuel Science ‘‘for his broad contributions to the field of fuel science’’ including the production of hydrogen by catalytic reforming, selective oxidation of hydrocarbons, biomass conversion, their reaction kinetics and mechanisms, and spectrokinetic methods to study catalysts in situ at reaction conditions and theory and application of inorganic membranes for separation of hydrogen and fuel-relevant gases. Finally, this special issue consists of contributions by catalysis researchers who participated in the two ACS symposia honoring Professor Oyama’s Awards.
We report the catalytic activity and mechanism of copper(I) phosphide, Cu 3 P, with predominant [00Ι] facet exposure for the electrochemical reduction of CO 2 (CO 2 RR) to formic acid. Crystalline nanosheets of this compound that show a preferential [00Ι] facet orientation exhibit undiminished CO 2 RR activity after 16 hours with full retention of crystal structure and surface chemical speciation and no detectable corrosion. In contrast to the range of products formed on Cu metal, CuO, and Cu 2 O, the CO 2 RR on Cu 3 P [00Ι] produces mainly hydrogen and formate as the sole carbon product in KHCO 3 electrolyte. Analysis of the Cu 3 P [00Ι] facet by HAADF-STEM was used to determine the surface lattice structure, while both XPS and Auger spectroscopies were used to determine the surface chemical speciation from the kinetic energies of ionized electrons. The presented analysis identifies isolated trigonal CuP 3 sites on the Cu 3 P[00Ι]-Cu 3 P 3 terminated surface and the Cu(I) oxidation state as precursor to the active catalyst. The CO 2 RR selectivity to formate and the higher turnover rate for H 2 production on the [00Ι] facet allows a structure-activity analysis and chemical mechanism to be proposed. Formation of a surface hydride at isolated *H-CuP 3 sites is proposed as the catalytic site in forming both H 2 and formate, while the long Cu—Cu separation retards forming C-C coupling products. In conclusion, these results disprove previously published claims of Cu(I) oxidation state as a sufficient criterion to promote CO 2 RR to C 2+ products, show that stronger bonded hydrides, *H-CuP 3 on Cu 3 P, favor production of the C1 product formate over all other carbon products, and predict that stronger formate binding (bidentate) is needed for CO 2 RR currents to compete with H 2 production.
Nickle phosphide, Ni2P, nanoparticles supported on SiO2 show a marked volcano shaped size dependence. Kinetic analysis and physicochemical characterization shows the electron density of Ni to increase with increasing Ni2P size, enhancing in turn the H2 adsorption strength. For particles below 15 nm, H adsorbs weakly causing a low surface coverage of H, gradually increasing with particle size. For large particles, hydrogen binds too strongly causing a high coverage but low catalytic activity. The remarkable size dependence of the electronic properties show that Ni2P particle size can be used to fine-tune its activity for hydrogenation.
Icosahedral boron phosphide (B 12 P 2 ) is a wide bandgap semiconductor (3.35 eV) that has been reported to “self-heal” from high-energy electron bombardment, making it attractive for potential use in radioisotope batteries, radiation detection, or in electronics in high radiation environments. Our study focused on improving B 12 P 2 hetero-epitaxial films by growing on 4H-SiC substrates over the temperature range of 1250–1450 °C using B 2 H 6 and PH 3 precursors in a H 2 carrier gas. Furthermore, XRD scans and Laue transmission photographs revealed that the epitaxial relationship was (0001)<11$\bar{2}$0> B 12 P 2 || (0001)<11$\bar{2}$0> 4H-SiC . The film morphology and crystallinity were investigated as a function of growth temperature and growth time. At 1250 °C, films tended to form rough, polycrystalline layers, but at 1300 and 1350 °C, films were continuous and comparatively smooth (R RMS ≤7 nm). At 1400 or 1450 °C, the films grew in islands that coalesced as the films became thicker. Using XRD rocking curves to evaluate the crystal quality, 1300 °C was the optimum growth temperature tested. Finally, at 1300 °C, the rocking curve FWHM decreased with increasing film thickness from 1494 arcsec for a 1.1 μm thick film to 954 arcsec for a 2.7 µm thick film, suggesting a reduction in defects with thickness.
Thin gallium phosphide layers were deposited on (0 0 1) Silicon surfaces via organometallic vapor phase epitaxy and characterized by electron channeling contrast imaging (ECCI). Stacking fault pyramids at a density of up to 6 x 10 7 cm -2 were identified in the GaP nucleation layer by varying the diffraction conditions. We show that these defects originate at the GaP/Si interface and propagate on all four {1 1 1} planes. We observed that such stacking fault pyramids interact with the gliding of misfit dislocations during lattice-mismatched growth and enhance the threading dislocation density. The initial pulsing of TEGa and TBP during the nucleation of GaP on Silicon has been found to strongly influence the formation of those pyramidal defects. Changing the number of pulse cycles allowed us to lower their density by two orders of magnitude from 6 x 10 7 cm -2 to 4 x 10 5 cm -2 .
An integrated experimental/modeling approach was utilized to assess the structural integrity of Ni - yttria-stabilized zirconia (YSZ) porous anode supports followed the solid oxide fuel cell (SOFC) operation on coal gas containing trace amounts of phosphorus impurities. Phosphorus was chosen as a typical impurity exhibiting strong interactions with the nickel followed by second phase formation. Tests were performed using Ni-YSZ anode-supported button cells exposed to 0.5-10 ppm of phosphine in synthetic coal gas at 700-800oC. The extent of Ni-P interactions was determined by a post-test scanning electron microscopy (SEM) analysis. Severe damage to the anode support due to nickel phosphide phase formation and extensive crystal coalescence was revealed, resulting in electric percolation loss. The subsequent finite element stress analyses were conducted using the actual anode support microstructures to assist in degradation mechanism explanation. Volume expansion induced by the Ni phase alteration was found to produce high stress levels such that local failure of the Ni-YSZ anode became possible under the operating conditions. These results emphasize the need for extensive coal gas cleanup when used as a fuel for SOFCs.
During reinvestigation of the hydrothermal synthesis reported earlier of the compound cesium nickel phosphide, 'CsNiP', we arrived at a new route to the synthesis of the cesium nickel halide compounds CsNiX{sub 3} (X=Cl, Br, I). The method has also been shown to extend to cobalt and iron compounds. Single crystals of these compounds were synthesized in phosphoric acid in sealed autoclaves. Their structures were determined by single-crystal X-ray diffraction methods. The compounds crystallize in the hexagonal space group P6{sub 3}/mmc in the BaNiO{sub 3} structure type. The synthetic method and the resultant crystallographic details for CsNiCl{sub 3} are essentially identical with those reported earlier for the synthesis and structure of 'CsNiP'. - Graphical abstract: The CsNiX{sub 3} (X=Cl, Br, I) structure. Cesium is blue, nickel is in dark green polyhedra, halide is brown. Highlights: Black-Right-Pointing-Pointer A hydrothermal approach to single crystal growth of cesium transition-metal halides. Black-Right-Pointing-Pointer Reexamination of 'CsNiP' to determine its composition as CsNiCl{sub 3}. Black-Right-Pointing-Pointer X-ray single-crystal structures of CsNiBr{sub 3} and CsNiI{sub 3}.
15 new quaternary Zintl phases have been synthesized by solid-state reactions from the respective elements, and their structures have been determined by single-crystal X-ray diffraction. Na{sub 3}E{sub 3}TrPn{sub 4} (E=Ca, Sr, Eu; Tr=Al, Ga, In; Pn=P, As, Sb) crystallize in the hexagonal crystal system with the non-centrosymmetric space group P6{sub 3}mc (No. 186). The structure represents a variant of the K{sub 6}HgS{sub 4} structure type (Pearson index hP22) and features [TrPn{sub 4}]{sup 9–} tetrahedral units, surrounded by Na{sup +} and Ca{sup 2+}, Sr{sup 2+}, Eu{sup 2+} cations. The nominal formula rationalization [Na{sup +}]{sub 3}[E{sup 2+}]{sub 3}[TrPn{sub 4}]{sup 9–} follows the octet rule, suggesting closed-shell configurations for all atoms and intrinsic semiconducting behavior. However, structure refinements for several members hint at disorder and mixing of cations that potentially counteract the optimal valence electron count. - Graphical abstract: The hexagonal, non-centrosymmetric structure of Na{sub 3}E{sub 3}TrPn{sub 4} (E=Ca, Sr, Eu; Tr=Al, Ga, In; Pn=P, As, Sb) features [TrPn{sub 4}]{sup 9–} tetrahedral units, surrounded by Na{sup +} and Ca{sup 2+}, Sr{sup 2+}, Eu{sup 2+} cations. - Highlights: • 15 quaternary phosphides, arsenides, and antimonides are synthesized and structurally characterized. • The structure is a variant of the hexagonal K{sub 6}HgS{sub 4}-type, with distinctive pattern for the cations. • Occupational and/or positional disorder of yet unknown origin exists for some members of the series.
The need/desire to lower the consumption of fossil fuels and its environmental consequences has reached unprecedented levels in recent years. A global effort has been undertaken to develop advanced renewable energy generation and especially energy storage technologies, as they would enable a dramatic increase in the effective and efficient use of renewable (and often intermittent) energy sources. The development of electrical energy storage (EES) technologies with high energy and power densities, long life, low cost, and safe use represents a challenge from both the fundamental science and technological application points of view. While the advent and broad deployment of lithium-ion batteries (LIBs) has dramatically changed the EES landscape, their performance metrics need to be greatly enhanced to keep pace with the ever-increasing demands imposed by modern consumer electronics and especially the emerging automotive markets. Current battery technologies are mostly based on the use of a transition metal oxide cathode (e.g., LiCoO 2 , LiFePO 4 , or LiNiMnCoO 2 ) and a graphite anode, both of which depend on intercalation/insertion of lithium ions for operation. While the cathode material currently limits the battery capacity and overall energy density, there is a great deal of interest in the development of high-capacity cathode materials as well as anode materials. Conversion reaction materials have been identified/proposed as potentially high-energy-density alternatives to intercalation-based materials. Yet, conversion reaction materials react during lithiation to form entirely new products, often with dramatically changed structure and chemistry, by reaction mechanisms that are still not completely understood. This makes it difficult to clearly distinguish the limitations imposed by the mechanism and practical losses from initial particle morphology, synthetic approaches, and electrode preparations. Transition metal compounds such as transition metal oxides, sulfides, fluorides, phosphides, and nitrides can undergo conversion reactions yielding materials with high theoretical capacity (generally from 500 to 1500 mA h g –1 ). Specifically, a number of transition metal oxides and sulfides have shown excellent electrochemical properties as high-capacity anode materials. In addition, some transition metal fluorides have shown great potential as cathode materials for Li rechargeable batteries. In this Account we present mechanistic studies, with emphasis on the use of operando methods, of selected examples of conversion-type materials as both potentially high-energy-density anodes and cathodes in EES applications. We also include examples of the conceptually similar conversion-type reactions involving chalcogens and halogens, with emphasis on the Li–S system. In this case we focus on the problems arising from the low electrical conductivities of elemental sulfur and Li 2 S and the “redox shuttle” phenomena of polysulfides. In addition to mechanistic insights from the use of operando methods, we further cover several key strategies in electrode materials design such as controlling the size, morphology, composition, and architecture.
The structures and the transport properties of a novel family of Zintl phosphides and arsenides with the formula AE 3 ZnPn 3 and the solid solutions AE 3 Al x Zn 1–x Pn 3 , AE 3 ZnAs y P 1–y (AE = Sr, Eu; Pn = P, As) are reported. Crystals of nine new phases have been obtained via Pb-flux reactions and used for structural work by means of single-crystal X-ray diffraction methods. The derived orthorhombic structure is without a direct analog, and features unusual structural units, where the Zn atoms are in both distorted tetrahedral and trigonal-planar coordination of pnictogens. Electronic structure calculations reveal moderately wide bandgaps for Sr 3 ZnP 3 and Sr 3 ZnAs 3 , on the order of 0.70 and 0.63 eV, respectively. Electrical transport measurements above room temperature indicate relatively high resistivity values above 500 K (ρ ≈ 4.8 Ω cm and above), but some of the samples exhibit very high Seebeck coefficients, as large as 300 μV/K at 560 K for Sr 3 ZnAs 3 . Aliovalent substitutions in AE 3 ZnPn 3 , achieved by the partial replacement of Zn 2+ with Al 3+ cations promote occupational and positional disorder, which causes structural transformation towards the disordered variant of the Sr 5 Al 2 Sb 6 structure type. Such substitutions also change the dimensionality of the polyanionic sub-lattice in the resulting quaternary AE 3 Al x Zn 1–x Pn 3 phases. Furthermore, preliminary transport property data on the latter reveal nine times lower electrical resistivity (ρ 500 ≈ 0.5 Ω cm) together with a significantly enhanced Seebeck coefficient, αmax ≈ 430 μV/K at 560 K.
Metal silicon phosphides have shown promise as nonlinear optical materials. To be practically useful and cheap, earth-abundant 3d transition metals are preferred over their scarcer and more expensive 4d and 5d counterparts. Here, we developed a synthetic method to produce polycrystalline bulk powders and millimeter-sized single crystals of ternary compounds FeSi 4 P 4 and CoSi 3 P 3 . Both studied compounds have noncentrosymmetric and chiral crystal structures with ordered Si/P arrangements as was confirmed by single-crystal X-ray diffraction and solid-state NMR. Despite the presence of the transition metal, FeSi 4 P 4 and CoSi 3 P 3 are semiconductors with direct band gaps of 1.3 and 1.6 eV, respectively, indicating low-spin d 6 electronic configuration for octahedral Fe 2+ and Co 3+ . Relative to reported sulfide materials, FeSi 4 P 4 and CoSi 3 P 3 small band gap semiconductors demonstrate an outstanding combination of second-harmonic generation (SHG) activity and laser damage threshold (LDT). Both studied materials are phase-matchable with a 2.09 μm laser and not only exhibit 2.5–3.0 times stronger SHG signal than that of the state-of-the-art AgGaS 2 standard but also demonstrate an LDT response of 2.3–2.5 times higher than that of AgGaS 2 (at 1.09 μm laser with a pulse width of 10 ns)-which is unprecedented for small band gap semiconductors.
The design of active, robust, and nonprecious electrocatalysts with both H 2 and O 2 evolution reaction (HER and OER) activities for overall water splitting is highly desirable but remains a grand challenge. Here in this article, we report a facile two-step method to synthesize porous Co-P/NC nanopolyhedrons composed of CoP x (a mixture of CoP and Co 2 P) nanoparticles embedded in N-doped carbon matrices as electrocatalysts for overall water splitting. The Co-P/NC catalysts were prepared by direct carbonization of Co-based zeolitic imidazolate framework (ZIF-67) followed by phosphidation. Benefiting from the large specific surface area, controllable pore texture, and high nitrogen content of ZIF (a subclass of metal–organic frameworks), the optimal Co-P/NC showed high specific surface area of 183 m 2 g -1 and large mesopores, and exhibited remarkable catalytic performance for both HER and OER in 1.0 M KOH, affording a current density of 10 mA cm -2 at low overpotentials of -154 mV for HER and 319 mV for OER, respectively. Furthermore, a Co-P/NC-based alkaline electrolyzer approached 165 mA cm -2 at 2.0 V, superior to that of Pt/IrO 2 couple, along with strong stability. Various characterization techniques including X-ray absorption spectroscopy (XAS) revealed that the superior activity and strong stability of Co-P/NC originated from its 3D interconnected mesoporosity with high specific surface area, high conductivity, and synergistic effect of CoP x encapsulated within N-doped carbon matrices.
Here, in this invited paper, we highlight some of our most recent work on the synthesis of low dimensional nanomaterials. Current graduate students and members of our group present four specific case systems: Nowotny-Juza phases, nickel phosphides, germanium-based core/shells, and organolead mixed-halide perovskites. Each system is accompanied by commentary from the student involved, which explains our motivation behind our work, as well as by a protocol detailing the key experimental considerations involved in their synthesis. We trust these and similar efforts by others and us will help further advance our understanding of the broader field of synthetic nanomaterials chemistry, while, at the same time, highlighting how important this area is to the development of new materials for technologically relevant applications.