Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE LOCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Passive Radiative “Thermostat” Enabled by Phase-Change Photonic Nanostructures

A thermostat senses the temperature of a physical system and switches heating or cooling devices on or off, regulating the flow of heat to maintain the system’s temperature near a desired set point. Taking advantage of recent advances in radiative heat transfer technologies, here we propose a passive radiative “thermostat” based on phase-change photonic nanostructures for thermal regulation at room temperature. By self-adjusting their visible to mid-IR absorptivity and emissivity responses depending on the ambient temperature, the proposed devices use the sky to passively cool or heat during day-time using the phase-change transition temperature as the set point, while at night-time temperature is maintained at or below ambient. We simulate the performance of a passive nanophotonic thermostat design based on vanadium dioxide thin films, showing daytime passive cooling (heating) with respect to ambient in hot (cold) days, maintaining an equilibrium temperature approximately locked within the phase transition region. Furthermore, passive radiative thermostats can potentially enable novel thermal management technologies, for example, to moderate diurnal temperature in regions with extreme annual thermal swings.

47 OTHER INSTRUMENTATION↗

Directional locking and hysteresis in stripe- and bubble-forming systems on one-dimensional periodic substrates with a rotating drive

We examine the dynamics of a two-dimensional stripe, bubble, and crystal forming system interacting with a periodic one-dimensional substrate under an applied drive that is rotated with respect to the substrate periodicity direction 𝑥. We find that the stripes remain strongly directionally locked to the 𝑥 direction for an extended range of drives before undergoing motion parallel to the drive. In some cases, the stripes break apart at the unlocking transition, but they can dynamically reform into stripes aligned perpendicular to the 𝑥 direction, producing hysteresis in the directional locking and unlocking transitions. In contrast, moving anisotropic crystal and bubble phases exhibit weaker directional locking and reduced or no hysteresis. The hysteresis occurs in regimes where the particle rearrangements occur and is most pronounced near the stripe phase. In conclusion, we also show that for varied substrate strength, substrate spacing, and particle density, a number of novel dynamical patterns can form that include a combination of stripe, bubble, and crystal morphologies.

36 MATERIALS SCIENCE↗

The impact of stratospheric aerosol intervention on the North Atlantic and Quasi-Biennial Oscillations in the Geoengineering Model Intercomparison Project (GeoMIP) G6sulfur experiment

As part of the Geoengineering Model Intercomparison Project a numerical experiment known as G6sulfur has been designed in which temperatures under a high-forcing future scenario (SSP5-8.5) are reduced to those under a medium-forcing scenario (SSP2-4.5) using the proposed geoengineering technique of stratospheric aerosol intervention (SAI). G6sulfur involves introducing sulfuric acid aerosol into the tropical stratosphere where it reflects incoming sunlight back to space, thus cooling the planet. Here, we compare the results from six Earth-system models that have performed the G6sulfur experiment and examine how SAI affects two important modes of natural variability, the northern wintertime North Atlantic Oscillation (NAO) and the Quasi-Biennial Oscillation (QBO). Although all models show that SAI is successful in reducing global mean temperature as designed, they are also consistent in showing that it forces an increasingly positive phase of the NAO as the injection rate increases over the course of the 21st century, exacerbating precipitation reductions over parts of southern Europe compared with SSP5-8.5. In contrast to the robust result for the NAO, there is less consistency for the impact on the QBO, but the results nevertheless indicate a risk that equatorial SAI could cause the QBO to stall and become locked in a phase with permanent westerly winds in the lower stratosphere.

54 ENVIRONMENTAL SCIENCES↗

Astrophysical Equation-of-State Constraints on the Color-Superconducting Gap

We demonstrate that astrophysical constraints on the dense-matter equation of state place an upper bound on the color-superconducting gap in dense matter above the transition from nuclear matter to quark matter. Pairing effects in the color-flavor locked quark matter phase increase the pressure at high density, and if this effect is sufficiently large then the requirements of causality and mechanical stability make it impossible to reach such a pressure in a way that is consistent with what is known at lower densities. The intermediate-density equation of state is inferred by considering extensions of chiral effective field theory to neutron star densities, and conditioning these using current astrophysical observations of neutron star radius, maximum mass, and tidal deformability (PSR J⁢0348+0432, PSR J1624-2230, PSR J⁢0740+6620, GW170817). At baryon number chemical potential μ = 2.6 GeV we find a 95% upper limit on the color-flavor locked pairing gap Δ of 457 MeV using overly conservative assumptions and 216 MeV with more reasonable assumptions. Furthermore, this constraint may be strengthened by future astrophysical measurements as well as by future advances in high-density QCD calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tidal Circularization of Binaries by Resonance Locking. I. The Importance of the Pre-main Sequence

Although tidal dissipation in binary stars has been studied for over a century, theoretical predictions have yet to match the observed properties of binary populations. This work quantitatively examines the recent proposal of tidal circularization by resonance locking, where tidal dissipation arises from resonances between the star’s natural oscillation frequencies and harmonics of the orbital frequency, and where resonances are “locked” for an extended period of time due to concurrent stellar evolution. We focus on tidal resonances with axi-symmetric gravity modes, and examine binaries with primary masses from one to two solar masses. We find that orbital evolution via resonance locking occurs primarily during the star’s pre-main-sequence phase, with the main-sequence phase contributing negligibly. Resonance locking, ignoring nonlinearity, can circularize binaries with peri-center distances out to ∼10 stellar radii, corresponding to circular periods of ∼4–6 days. However, we find resonantly excited gravity modes will become nonlinear in stellar cores, which prevents them from reaching their full, linear amplitudes. We estimate that such a “saturated resonance lock” reduces the circularization period by about a third, but resonance locking remains much more effective than the cumulative actions of equilibrium tides. In a companion paper, we examine recent binary data to compare against theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Imaging via complete cantilever dynamic detection: General dynamic mode imaging and spectroscopy in scanning probe microscopy

We develop and implement a multifrequency spectroscopy and spectroscopic imaging mode, referred to as general dynamic mode (GDM), that captures the complete spatially- and stimulus dependent information on nonlinear cantilever dynamics in scanning probe microscopy (SPM). GDM acquires the cantilever response including harmonics and mode mixing products across the entire broadband cantilever spectrum as a function of excitation frequency. GDM spectra substitute the classical measurements in SPM, e.g. amplitude and phase in lock-in detection. Here, GDM is used to investigate the response of a purely capacitively driven cantilever. We use information theory techniques to mine the data and verify the findings with governing equations and classical lock-in based approaches. We explore the dependence of the cantilever dynamics on the tip–sample distance, AC and DC driving bias. This approach can be applied to investigate the dynamic behavior of other systems within and beyond dynamic SPM. In conclusion, GDM is expected to be useful for separating the contribution of different physical phenomena in the cantilever response and understanding the role of cantilever dynamics in dynamic AFM techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multimode nonclassical light generation through the optical-parametric-oscillator threshold

We show that an optical parametric oscillator which is simultaneously resonant for several modes, either spatial or temporal, generates both below and above threshold a multimode nonclassical state of light consisting of squeezed vacuum states in all the nonoscillating modes. We confirm this prediction by an experiment dealing with the degenerate TEM{sub 01} and TEM{sub 10} modes. We show the conservation of nonclassical properties when the threshold is crossed. The experiment is made possible by the implementation of a new method to lock the relative phase of the pump and the injected beam.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

JLAB LLRF 3.0 Development and Tests

The Jefferson Lab LLRF 3.0 system is being developed to replace legacy LLRF systems in the CEBAF accelerator. The new design builds upon 25 years of design and operational RF control experience, and our recent collaboration in the design of the LCLSII LLRF system. The new cavity control algorithm is a fully functional phase and amplitude locked Self Exciting Loop (SEL). This paper discusses the progress of the LLRF 3.0 hardware design, FPGA firmware development, User Datagram Protocol (UDP) operation, and recent LLRF 3.0 system tests on the CEBAF Booster cryomodule in the Upgrade Injector Test Facility (UITF).

Plawski, T. E.↗

First SELAP Algorithm Operational Experience of the New LLRF 3.0 RF Control System

The JLAB LLRF 3.0 system has been developed and is replacing the 30-year-old LLRF systems in the CEBAF accelerator. The LLRF system builds upon 25 years of design and operational RF control experience (digital and analog), and our recent collaboration in the design of the LCLSII LLRF system. The new system also incorporates a cavity control algorithm using a fully functional phase and amplitude locked Self Exciting Loop (SELAP). The first system (controlling 8 cavities) was installed and commissioned in August of 2021. Since then the new LLRF system has been operating with cavity gradients up to 20 MV/m, and electron beam currents up to 350 uA. This paper discusses the operational experience of the LLRF 3.0 SELAP algorithm along with other software and firmware tools like cavity and klystron characterization and quench detection.

Plawski, T. E.↗

Spatial Instabilities, Homogeneities and Proximity Effects: Highly Correlated Metals

We have developed a superconducting scanning tunneling microscope (S-STM) which is a direct and local probe of the pair wave function of superconducting materials via the Josephson effect and quasiparticle spectra via scanning tunneling spectroscopy (STS). The novel feature of this device is a superconducting tip (Pb with an Ag capping layer) in close proximity to a superconducting sample to form a superconductor-insulator-superconductor (SIS) tunnel junction. The operation of this S-STM has been verified in the observation of Josephson tunneling between the tip and different sample systems including Pb films and NbSe 2 . At the experimental base temperature (T=2.1K) and large junction normal resistance (R N > 10 4 Ω) the phase is not locked in the washboard potential, but is excited thermally to be diffusive.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the stabilisation of locked tearing modes in ITER and other large tokamaks

Tearing modes in tokamaks typically rotate while small and then lock at a fixed location when larger. Research on present-day devices has focused almost exclusively on stabilisation of rotating modes, as it has been considered imperative to avoid locked modes. However, in larger devices, stabilisation during the rotating phase is made difficult by fast locking at small island widths, and large broadening of the stabilising wave-driven current profile. In contrast, the smaller island width at locking not only mitigates the deleterious consequences of locked modes, but also permits their efficient stabilisation. On large devices, it thus becomes surprisingly advantageous to allow the mode to grow and lock naturally before stabilising it, challenging the mainstream strategy of neoclassical tearing mode stabilisation during the rotating phase. Furthermore, calculations indicate that a locked island stabilisation strategy should be adopted in the ITER tokamak, with a large potential impact on the fusion gain and disruptivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mitigation of upward and downward vertical displacement event heat loads with upper or lower massive gas injection in DIII-D

Intentionally triggered upward and downward vertical displacement events (VDEs) leading to disruptions were pre-emptively mitigated with neon massive gas injection (MGI) coming from either above or below the plasma. Global indicators of disruption mitigation effectiveness (conducted heat loads, radiated power, and vessel motion) do not show a clear improvement when mitigating with the gas jet located closer to the VDE impact area. A clear trend of improved mitigation is observed for earlier MGI timing relative to the VDE impact time. The plasma edge magnetic perturbation is seen to lock to a preferential phase during the VDE thermal quench, but this phase is not clearly matched by preliminary attempts to fit to the conducted heat load phase. Clear indications of plasma infra-red (IR) emission are observed both before and during the disruptions. This IR emission can affect calculation of disruption heat loads; here, the time decay of post-disruption IR signals is used to correct for this effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dipole spectrum structure of nonresonant nonpertubative driven two-level atoms

We analyze the dipole spectrum of a two-level atom excited by a nonresonant intense monochromatic field under the electric dipole approximation and beyond the rotating wave approximation. We show that the apparently complex spectral structure can be completely described by two families: harmonic frequencies of the driving field and field-induced nonlinear fluorescence. Our formulation of the problem provides quantitative laws for the most relevant spectral features: harmonic ratios and phases, nonperturbative Stark shift, and frequency limits of the harmonic plateau. In particular, we demonstrate the locking of the harmonic phases at the wings of the plateau opening the possibility of ultrashort pulse generation through harmonic filtering.

74 ATOMIC AND MOLECULAR PHYSICS↗

Stability and Control of Burning Tokamak Plasmas with Resistive Walls: Final Technical Report

This project is focused on theoretical and computational development for quantitative prediction of the stability and control of the equilibrium state evolution in toroidal burning plasmas, including its interaction with the surrounding resistive wall. The stability of long pulse burning plasmas is highly sensitive to the physics of resonant layers in the plasma, sources of momentum and flow, kinetic effects of energetic particles, and boundary conditions at the wall, including feedback control and error fields. In ITER in particular, the low toroidal flow equilibrium state, sustained primarily by energetic alpha particles from fusion reactions, will require the consideration of all of these key elements to predict quantitatively the stability and evolution. The principal investigators on this project have performed theoretical and computational analyses, guided by analytic modeling, to address this physics in realistic configurations. The overall goal has been to understand the key physics mechanisms that describe stable toroidal burning plasmas under active feedback control. Several relevant achievements have occurred during this project, leading to publications and invited conference presentations. In theoretical efforts, with the physics of the resonant layers, resistive wall, and toroidal momentum transport included, this study has extended from cylindrical resistive plasma - resistive wall models with feedback control to toroidal geometry with strong shaping to study mode coupling effects on the stability. These results have given insight into combined tearing and resistive wall mode behavior in simulations and experiment, while enabling a rapid exploration of plasma parameter space, to identify possible domains of interest for large plasma codes to investigate in more detail. Resonant field amplification and quasilinear torques in the presence of error fields and velocity shear have also been investigated. Here it was found, surprisingly, that the Maxwell torque on resonant layers in the plasma which exhibit finite real frequencies ωr in their response is significantly different from the conventional results based on tearing layers with pure real growth (or damping) rates. This observation suggests the possibility that the torque on the tearing layers can lock the plasma rotation to this finite phase velocity, which may lead to locking in which velocity shear is maintained. More broadly, the sources of all torques driving flows in magnetic confinement experiments is not fully understood, and this theoretical work may shed light on puzzling experimental results. It was also found that real frequencies occur over a wide range of plasma response regimes, and are indeed the norm and not the exception, often leading to profound effects on the locking torque. Also, the influence of trapped energetic ions orbiting over the resistive plasma mode structure, a critical effect in burning plasmas, was investigated through analytic modeling and analysis of simulations and experiment. This effort has shown that energetic ions can drive the development of disruptive instabilities, but also damp and stabilize the instabilities, depending on the details of the shear in the equilibrium magnetic field. This finding could be critical to maintaining stable operations in burning plasmas. In the most recent work, a series of simulations have been conducted to study the effect of differential flow and energetic ion effects on entry to the onset of a disruptive instability in the most realistic conditions possible, with preexisting nonlinearly saturated benign instabilities. Throughout this work, the linear and quasilinear theory of resonant layers with differential flow between them, their interaction with resistive wall and error fields, and energetic ions effects, have been used to understand realistic simulations of mode onset and the experimental discharges they represent. These studies will continue to answer remaining questions about the relation between theoretical results obtained in this project and observations of the onset and evolution of disruptive instabilities in experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Color Superconductivity and Charge Neutrality in Yukawa Theory

It is generally believed that when Cooper pairing occurs between two different species of fermions, their Fermi surfaces become locked together so that the resultant state remains “neutral,” with equal number densities of the two species, even when subjected to a chemical potential that couples to the difference in number densities. This belief is based on mean-field calculations in models with a zero-range interaction, where the anomalous self-energy is independent of energy and momentum. Following up on an early report of a deviation from neutrality in a Dyson-Schwinger calculation of color-flavor-locked quark matter, we investigate the neutrality of a two-species condensate using a Yukawa model which has a finite-range interaction. In a mean field calculation we obtain the full energy-momentum dependence of the self-energy and find that the energy dependence leads to a population imbalance in the Cooper-paired phase when it is stressed by a species-dependent chemical potential. This gives some support to the suggestion that the color-flavor-locked phase of quark matter might not be an insulator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding the effect of resonant magnetic perturbations on tearing mode dynamics

Numerical understandings of the effect of resonant magnetic perturbations (RMPs) on 2/1 tearing mode (TM) dynamics observed on J-TEXT tokamak (Hu et al. Nucl. Fusion 52, 083011 (2012)) are presented in this paper. The non-uniform mode rotation frequency, modulated by electromagnetic force (F{sub em}) and viscous force (F{sub vs}), results in the applied RMPs contributing both net stabilizing and braking effect on TM. Numerical evaluation based on analytical theory shows the applied RMP contributes a dominant stabilizing effect, which is responsible for the suppression of TM. The dynamics of the first discovered small locked island are investigated. It is found that the island is locked at the stabilizing phase and the saturated island width is less than the linear layer width. The simulated Mirnov signal indicates the small locked island is likely to be the complete suppression case observed in experiments. Associated with the application of RMP, the shape of Mirnov signal deviates from sinusoidal before mode locking, which is explained by numerical modeling. The comparisons between the numerical and experimental results are in good agreement phenomenally.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Injection Locking Dynamics of Oscillation Loop with Saturable Gain

We analytically derive and experimentally verified the injection-locking range and phase-noise suppression ratio of an oscillation loop with saturable gain, establishing a general and straightforward approach for analyzing injection locking dynamics.

Xi, Zichen [ORNL]↗

Toroidal phase of post-disruption runaway electron loss to wall in presence of applied 3-D fields in DIII-D

The toroidal distribution of runaway electrons (REs) striking the centre post in DIII-D post-disruption RE final loss events is simulated utilizing the MARS-F code combined with the REORBIT module, by tracing the guiding-centre drift orbits of test REs in the presence of external (applied) plus internal (intrinsic instability) 3-D fields. To better recover the experimental results, three different equilibria with different safety factor profiles are adopted. Dominant resistive magnetohydrodynamic instabilities are found to be m/n=2/1, 3/2 and 1/1 modes (where m and n are the poloidal and toroidal mode numbers). Externally applied n=1 resonant magnetic perturbations (RMPs), with both even and odd parity configuration, are considered in each equilibrium. Locking of MHD instability to the applied RMPs is simulated by minimizing the total perturbed magnetic energy in the plasma. Here, the simulated toroidal locations, where most REs strike in the presence of an edge m/n= 2/1 instability and the n=1 RMPs in even parity, are found to agree well with experiments. Modeling also captures the measured n = 2 RE loss pattern on the wall for experiments where an edge m/n=3/2 instability is dominant instead of the m/n=2/1 mode. The key overall findings include (a) the measured global RE toroidal impact pattern in experiments can be explained by a locked resistive kink instability, (b) the toroidal phase of the locked mode is well predicted by minimizing the total perturbed magnetic energy, and (c) this edge locked mode determines the toroidal phase of the peak RE wall impact.

Bai, Xue [University of California San Diego, La J↗