Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Predicting the oxidative lifetime of beta NiAl-Zr alloys

Nickel aluminides containing 40 to 50 at. pct Al and 0.1 at. pct Zr were studied following cyclic oxidation at 1400 C. The selective oxidation of Al resulted in the formation of protective Al2O3 scales on each alloy composition. However, repeated cycling eventually resulted in the gradual formation of less-protective NiAl2O4, first appearing on the 40Al alloys followed at longer times on the 45Al alloys. The appearance of the NiAl2O4, signaling the end of the protective scale-forming capability of the alloy, was related to the presence of gamma-prime (Ni3Al) which formed as a result of the loss of Al from the sample. A diffusion model, based on finite-difference techniques, was developed to predict the protective life of beta Ni-Al alloys. This model predicts Ni and Al concentration profiles after various oxidation exposures. The model can predict the oxidative lifetime due to Al depletion when the Al concentration decreases to a critical concentration. Measured Al concentration profiles on two alloys after various oxidation exposures are compared to those predicted by the diffusion model. The time to the appearance of the NiAl2O4 and that predicted by the diffusion model are compared and discussed.

Nesbitt, J. A.↗
NASA NTRS1992

Acetate concentrations and oxidation in salt marsh sediments

Acetate concentrations and rates of acetate oxidation and sulfate reduction were measured in S. alterniflora sediments in New Hampshire and Massachusetts. Pore water extracted from cores by squeezing or centrifugation contained in greater than 0.1 mM acetate and, in some instances, greater than 1.0 mM. Pore water sampled nondestructively contained much less acetate, often less than 0.01 mM. Acetate was associated with roots, and concentrations varied with changes in plant physiology. Acetate turnover was very low whether whole core or slurry incubations were used. Radiotracers injected directly into soils yielded rates of sulfate reduction and acetate oxidation not significantly different from core incubation techniques. Regardless of incubation method, acetate oxidation did not account for a substantial percentage of sulfate reduction. These results differ markedly from data for unvegetated coastal sediments where acetate levels are low, oxidation rate constants are high, and acetate oxication rates greatly exceed rates of sulfate reduction. The discrepancy between rates of acetate oxidation and sulfate reduction in these marsh soils may be due either to the utilization of substrates other than acetate by sulfate reducers or artifacts associated with measurements of organic utilization by rhizosphere bacteria. Care must be taken when interpreting data from salt marsh sediments since the release of material from roots during coring may affect the concentrations of certain compounds as well as influencing results obtained when sediment incubations are employed.

Source record↗
NASA NTRS1994

Thermogravimetric study of oxidation of a PdCr alloy used for high-temperature sensors

In this study, the oxidation of Pd-13 weight percent Cr, a candidate alloy for high-temperature strain gages, was investigated by thermogravimetry. Although the bulk alloy exhibits linear electrical resistivity versus temperature and stable resistivity at elevated temperatures, problems attributed to oxidation occur when this material is fabricated into strain gages. In this work, isothermal thermogravimetry (TG) was used to study the oxidation kinetics. Results indicate that the oxidation of Pd-13 weight percent Cr was approximately parabolic in time at 600 C but exhibited greater passivation from 700 to 900 C. At 1100 C, the oxidation rate again increased.

Boyd, Darwin L.↗
NASA NTRS1996

Designing Ni- and Co-Base Superalloys To Resist Oxidation

Analysis of experimental cyclic-oxidation data yields quantitative design criterion. Equation characterizing abilities of superalloys to resist oxidation at high temperatures proves useful for designing new alloy compositions to resist oxidation. Rates tendency to become oxidized in terms of single attack parameter, K(a), as function of composition and temperature: decrease in K(a) signifies increase in resistance to oxidation.

Barrett, Charles A.↗
NASA NTRS1996

The Oxidation and Protection of Gamma Titanium Aluminides

The excellent density-specific properties of the gamma class of titanium aluminides make them attractive for intermediate-temperature (600-850 C) aerospace applications. The oxidation and embrittlement resistance of these alloys is superior to that of the alpha(sub 2) and orthorhombic classes of titanium aluminides. However, since gamma alloys form an intermixed Al2O3/TiO2 scale in air rather than the desired continuous Al2O3 scale, oxidation resistance is inadequate at the high end of this temperature range (i.e., greater than 750-800 C). For applications at such temperatures, an oxidation-resistant coating will be needed; however, a major drawback of the oxidation-resistant coatings currently available is severe degradation in fatigue life by the coating. A new class of oxidation-resistant coatings based in the Ti-Al-Cr system offers the potential for improved fatigue life.

Brady, Michael P.↗
NASA NTRS1994

Depth Profiling Analysis of Aluminum Oxidation During Film Deposition in a Conventional High Vacuum System

The oxidation of aluminum thin films deposited in a conventional high vacuum chamber has been investigated using x-ray photoelectron spectroscopy (XPS) and depth profiling. The state of the Al layer was preserved by coating it with a protective MgF2 layer in the deposition chamber. Oxygen concentrations in the film layers were determined as a function of sputter time (depth into the film). The results show that an oxidized layer is formed at the start of Al deposition and that a less extensively oxidized Al layer is deposited if the deposition rate is fast. The top surface of the Al layer oxidizes very quickly. This top oxidized layer may be thicker than has been previously reported by optical methods. Maximum oxygen concentrations measured by XPS at each Al interface are related to pressure to rate ratios determined during the Al layer deposition.

Kim, Jongmin↗
NASA NTRS1995

Effect of Blockade of Nitric Oxide Synthesis on the Renin Secretory Response to Frusemide in Conscious Rabbits

The enzyme nitric oxide synthase is present in the macula densa and may participate in the control of renin secretion by the adjacent juxtagiomerular cells. In the present study, we investigated the effect of inhibiting nitric oxide synthase on the renin secretory response to frusemide, which stimulates renin secretion by blocking Na(+)-K(+)-2Cl(-) co-transport in the macula densa. Injection of frusemide in 12 conscious rabbits elicited a transient increase in mean arterial pressure from 84 +/- 2 to 92 +/-3 mm Hg at 5 min (P less than 0.01) and a sustained increase in heart rate from 246 +/- 6 to 281 +/- 10 beats/min at 45 min (P less than 0.01). Plasma renin activity increased from 8.0 +/- 1.2 to 14.3 +/- 1.8, 12.4 +/- 1.6 and 11.6 +/- 1.5 pmol/2h ml at 15, 30 and 45min respectively (P less than 0.01). There were no changes in plasma sodium and potassium concentrations or osmoiality. Inhibition of nitric oxide synthase with N(sup G)-nitro-L- arginine methyl ester increased mean arterial pressure by 9 mm Hg, decreased heart rate and plasma renin activity, and markedly suppressed the renin response to frusemide (from 4.6 +/- 0.7 to 7.6 +/- 1.7, 4.7 +/- 1.0 and 4.6 +/- 0.7pmol/2h ml at 15, 30 and 45 min respectively). By contrast, infusion of an equipressor dose of phenylephrine did not suppress the renin response to frusemide. Histochemical studies with the NADPH diaphorase technique confirmed the presence of nitric oxide synthase in the macula densa, and suggested that enzyme activity is increased by treatment with frusemide. These results are consistent with a role for the L- arginine-nitric oxide pathway in the modulation of renin secretion by the macula densa.

Reid, Ian A.↗
NASA NTRS1984

Solubilization and Resolution of the Membrane-Bound Nitrite Reductase from Paracoccus Halodenitrificans into Nitrite and Nitric Oxide Reductases

Membranes prepared from Paracoccus halodenitrificans reduced nitrite or nitric oxide to nitrous oxide. Extraction of these membranes with the detergent CHAPSO [3-(3-Chlolamidoporopyldimethylammonio)-1-(2- hydroxy-1-propanesulfonate)], followed by ammonium sulfate fractionation of the solubilized proteins, resulted in the separation of nitrite and nitric oxide reductase activities. The fraction containing nitrite reductase activity spectrally resembled a cd-type cytochrome. Several cytochromes were detected in the nitric oxide reductase fraction. Which, if any, of these cytochromes is associated with the reduction of nitric oxide is not clear at this time.

Grant, Michael A.↗
NASA NTRS1993

Development of the Monolith Froth Reactor for Catalytic Wet Oxidation of CELSS Model Wastes

The aqueous phase oxidation of acetic acid, used as a model compound for the treatment of CELSS (Controlled Ecological Life Support System) waste, was carried out in the monolith froth reactor which utilizes two-phase flow in the monolith channels. The catalytic oxidation of acetic acid was carried out over a Pt/Al2O3 catalyst at temperatures and pressures below the critical point of water. The effect of externally controllable parameters (temperature, liquid flow rate, distributor plate orifice size, pitch, and catalyst distance from the distributor plate) on the rate of acetic acid oxidation was investigated. Results indicate reaction rate increased with increasing temperature and exhibited a maximum with respect to liquid flow rate. The apparent activation energy calculated from reaction rate data was 99.7 kJ/mol. This value is similar to values reported for the oxidation of acetic acid in other systems and is comparable to intrinsic values calculated for oxidation reactions. The kinetic data were modeled using simple power law kinetics. The effect of "froth" feed system characteristics was also investigated. Results indicate that the reaction rate exhibits a maximum with respect to distributor plate orifice size, pitch, and catalyst distance from the distributor plate. Fundamental results obtained were used to extrapolate where the complete removal of acetic acid would be obtained and for the design and operation of a full scale CELSS treatment system.

Fisher, John W.↗
NASA NTRS1976

Nitric Oxide Formation by Meteoroids in the Upper Atmosphere

The process of nitric oxide formation during atmospheric entry of meteoroids is analyzed theoretically. An ablating meteoroid is assumed to be a point source in a uniform flow with a continuum regime evolving in its wake. The amount of nitric oxide produced by high-temperature reactions of air in the continuum regime is calculated by numerical integration of chemical-rate equations. This is accomplished by assuming that flow properties are constant across the reacting region, the radius of the region being determined from considerations of shock-wave formation and molecular diffusion. The results, when summed over the observed mass, velocity, and entry-angle distributions of meteoroids, provide annual global production rates of nitric oxide as a function of altitude. The peak production of nitric oxide is found to occur at altitudes between 9 x 10(exp 4) and 10(exp 5) m, the total annual rate being about 4 x 10(exp 7) kg. The present results suggest that the large concentration of nitric oxide observed below 9.5 x 10(exp 4) m could be attributed to meteoroids instead of photodissociation of nitrogen into metastable, 2D-state atoms, as has been previously hypothesized.

Menees, Gene P.↗
NASA NTRS1995

Development of the Monolith Froth Reactor for Catalytic Wet Oxidation of CELSS Model Wastes

The aqueous phase oxidation of acetic acid, used as a model compound for the treatment of CELSS (Controlled Ecological Life Support System) waste, was carried out in the monolith froth reactor which utilizes two-phase flow in the monolith channels. The catalytic oxidation of acetic acid was carried out over a Pt/Al2O3 catalyst, prepared at The University of Tulsa, at temperatures and pressures below the critical point of water. The effect of externally controllable parameters (temperature, liquid flow rate, distributor plate orifice size, pitch, and catalyst distance from the distributor plate) on the rate of acetic acid oxidation was investigated. Results indicate reaction rate increased with increasing temperature and exhibited a maximum with respect to liquid flow rate. The apparent activation energy calculated from reaction rate data was 99.7 kJ/mol. This value is similar to values reported for the oxidation of acetic acid in other systems and is comparable to intrinsic values calculated for oxidation reactions. The kinetic data were modeled using simple power law kinetics. The effect of "froth" feed system characteristics was also investigated. Results indicate that the reaction rate exhibits a maximum with respect to distributor plate orifice size, pitch, and catalyst distance from the distributor plate. Fundamental results obtained were used to extrapolate where the complete removal of acetic acid would be obtained and for the design and operation of a full scale CELSS treatment system.

Abraham, Martin↗
NASA NTRS1978

NMR and Infrared Study of Thermal Oxidation of cis-1, 4-Polybutadiene

A study of the microstructural changes occuring in CB during thermal, uncatalyzed oxidation was carried out. Although the oxidation of CB is accompanied by extensive crosslinking with attendant insolubilization, it was found possible to follow the oxidation of solid CB directly with C-13 NMR spectroscopy. The predominant products appearing in the C-13 NMR spectra of oxidized CB are epoxides. The presence of lesser amounts of alcohols, peroxides, and carbonyl structures was adduced from complementary infrared and NMR spectra of soluble extracts obtained from the oxidized, crosslinked CB. This distribution of functional groups contrasts with that previously reported for the autooxidation of 1,4-polyisoprene. The difference was rationalized in terms of the relative stabilities of intermediate radical species involved in the autoxidation of CB and 1,4-polyisoprene.

Gemmer, Robert V.↗
NASA NTRS1997

Oxidative Degradation of Nadic-End-Capped Polyimides: Evidence for Reactions Occurring at High Temperatures - 2

The oxidative degradation of PMR (for polymerization of monomeric reactants) polyimides at elevated temperatures was followed by cross-polarized magic angle spinning (Cp-MAS) NMR. C-13 labeling of selected sites in the polymers allowed for direct observation of the transformations arising from oxidation processes. As opposed to model compound studies, the reactions were followed directly in the polymer. The labeling experiments confirm the previously reported oxidation of the methylene carbon to ketone in the methylenedianiline portion of the polymer chain. They also show the formation of two other oxidized species, acid and ester, from this same carbon. In addition, the technique provides the first evidence of the kind of degradation reactions that are occurring in the nadic end caps. Several PMR formulations containing moieties determined to be present after oxidation, as suggested by the labeling study, were synthesized. Weight loss, FTIR, and natural abundance NMR of these derivatives were followed during aging. In this way, weight loss could be related to the observed transformations.

Meador, Mary Ann B.↗
NASA NTRS2000

Process and Equipment for Nitrogen Oxide Waste Conversion to Fertilizer

The present invention describes a process for converting vapor streams from sources containing at least one nitrogen-containing oxidizing agent therein to a liquid fertilizer composition comprising the steps of: (1) directing a vapor stream containing at least nitrogen-containing oxidizing agent to a first contact zone; (2) contacting said vapor stream with water to form nitrogen oxide(s) from said at least one nitrogen- containing oxidizing agent; (3) directing said acid(s) as a second stream to a second contact zone; (4) exposing said second stream to hydrogen peroxide which is present within said second contact zone in a relative amount of at least 0.1% by weight of said second stream within said second contact zone to convert at least some of any nitrogen oxide species or ions other than in the nitrite form present within said second stream to nitrate ion; (5) sampling said stream within said second contact zone to determine the relative amount of hydrogen peroxide within said second contact zone; (6) adding hydrogen peroxide to said second contact zone when a level on hydrogen peroxide less than 0.1% by weight in said second stream is determined by said sampling; (7) adding a solution comprising potassium hydroxide to said second stream to maintain a pH between 6.0 and 11.0 within said second stream within said second contact zone to form a solution of potassium nitrate; and (8) removing sais solution of potassium nitrate from said second contact zone.

Lueck, Dale E.↗
NASA NTRS2000

Process for Producing Metal Compounds from Graphite Oxide

A process for providing elemental metals or metal oxides distributed on a carbon substrate or self-supported utilizing graphite oxide as a precursor. The graphite oxide is exposed to one or more metal chlorides to form an intermediary product comprising carbon. metal. chloride. and oxygen This intermediary product can be flier processed by direct exposure to carbonate solutions to form a second intermediary product comprising carbon. metal carbonate. and oxygen. Either intermediary product may be further processed: a) in air to produce metal oxide: b) in an inert environment to produce metal oxide on carbon substrate: c) in a reducing environment. to produce elemental metal distributed on carbon substrate. The product generally takes the shape of the carbon precursor.

Hung, Ching-Cheh↗
NASA NTRS2000

Process for Producing Metal Compounds From Graphite Oxide

A process for providing elemental metals or metal oxides distributed on a carbon substrate or self-supported utilizing graphite oxide as a precursor. The graphite oxide is exposed to one or more metal chlorides to form an intermediary product comprising carbon, metal, chloride, and oxygen. This intermediary product can be fiber processed by direct exposure to carbonate solutions to form a second intermediary product comprising carbon. metal carbonate. and oxygen. Either intermediary product may be further processed: a) in air to produce metal oxide b) in an inert environment to produce metal oxide on carbon substrate; c) in a reducing environment to produce elemental metal distributed on carbon substrate. The product generally takes the shape of the carbon precursor.

Ching-Cheh Hung↗
NASA NTRS1999

Fe(VI) as a Possible Oxidant on the Martian Surface

The essential findings of the three biological experiments (Gas Exchange, Labeled Released, and Pyrolitic Release) aboard the Viking Mars landers were the discovery of the presence of one or more strong oxidants on the Martian surface. The Gas Exchange experiments showed that wetting Martian soil leads to the evolution of oxygen, while in the Labeled Release experiment addition of a nutrient solution containing C-14-labeled formate, glycine, lactate, alanine, and glycolic acid induced CO2 evolution. A general consensus was reached that all data taken together pointed to the presence on Martian surface of a strong oxidant, or most probably several different types of oxidants. Several candidates have been proposed as oxidants, including superoxides, hydrogen peroxide, and iron oxides (possibly gamma-Fe2O3). Additional information is contained in the original extended abstract.

Tsapin, A. I.↗
NASA NTRS2000

Molecular Level Coating for Metal Oxide Particles

Polymer encapsulated metal oxide particles are prepared by combining a polyamide acid in a polar aprotic solvent with a metal alkoxide solution. The polymer was imidized and the metal oxide formed simultaneously in a refluxing organic solvent. The resulting polymer-metal oxide is an intimately mixed commingled blend, possessing synergistic properties of both the polymer and preceramic metal oxide. The encapsulated metal oxide particles have multiple uses including, being useful in the production of skin lubricating creams, weather resistant paints, as a filler for paper, making ultraviolet light stable filled printing ink, being extruded into fibers or ribbons, and coatings for fibers used in the production of composite structural panels.

McDaniel, Patricia R.↗