Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Influence of bias voltage on structural and optical properties of TiN{sub x} thin films

In the present work, Ti thin films were deposited on Si substrate using DC sputtering technique. Indigenous hot cathode arc discharge plasma system was used for nitriding over these samples, where the plasma parameters and work piece can be controlled independently. A mixture of H{sub 2} and N{sub 2} gases (in the ratio of 80:20) was supplied into the plasma chamber. The effect of bias voltage on the crystal structure, morphology and optical properties was investigated by employing various physical techniques such as X-ray Diffraction, Atomic Force Microscopy and UV-Vis spectrometry. It was found that bias voltage affects largely the crystal structure and band gap which in turn is responsible for the modifications in optical properties of the deposited films.

36 MATERIALS SCIENCE↗

Optical properties of InGaN/GaN nanopillars fabricated by postgrowth chemically assisted ion beam etching

The optical properties of InGaN/GaN quantum wells, which were nanopatterned into cylindrical shapes with diameters of 2 {mu}m, 1 {mu}m, or 500 nm by chemically assisted ion beam etching, were investigated. Photoluminescence (PL) and time-resolved PL measurements suggest inhomogeneous relaxation of the lattice-mismatch induced strain in the InGaN layers. By comparing to a strain distribution simulation, we found that partial stain relaxation occurs at the free side wall, but strain remains in the middle of the pillar structures. The strain relaxation leads to an enhanced radiative recombination rate by a factor of 4-8. On the other hand, nonradiative recombination processes are not strongly affected, even by postgrowth etching. Those characteristics are clearly reflected in the doughnut-shape emission patterns observed by optical microscopy.

36 MATERIALS SCIENCE↗

Static and dynamic optical properties of La 1-x Sr x FeO 3-δ : The effects of A-site and oxygen stoichiometry

Perovskite oxides are a promising material class for photovoltaic and photocatalytic applications due to their visible band gaps, nanosecond recombination lifetimes, and great chemical diversity. However, there is limited understanding of the link between composition and static and dynamic optical properties, despite the critical role these properties play in the design of light-harvesting devices. To clarify these relationships, we systemically studied the optoelectronic properties in La 1-x Sr x FeO 3-δ epitaxial films, uncovering the effects of A-site cation substitution and oxygen stoichiometry. Variable-angle spectroscopic ellipsometry was used to measure static optical properties, revealing a linear increase in absorption coefficient at 1.25 eV and a red-shifting of the optical absorption edge with increasing Sr fraction. The absorption spectra can be similarly tuned through the introduction of oxygen vacancies, indicating the critical role that nominal Fe valence plays in optical absorption. Dynamic optoelectronic properties were studied with ultrafast transient reflectance spectroscopy, revealing similar nanosecond photoexcited carrier lifetimes for oxygen deficient and stoichiometric films with the same nominal Fe valence. Furthermore, these results demonstrate that while the static optical absorption is strongly dependent on nominal Fe valence tuned through cation or anion stoichiometry, oxygen vacancies do not appear to play a significantly detrimental role in the recombination kinetics.

36 MATERIALS SCIENCE↗

Influence of annealing temperature and Sn doping on the optical properties of hematite thin films determined by spectroscopic ellipsometry

Hematite (α-Fe{sub 2}O{sub 3}) thin films were prepared by sol-gel route and investigated for application in H{sub 2} generation by photo-assisted water splitting. The photoelectrochemical (PEC) performance was shown to increase significantly for films deposited on SnO{sub 2}:F/glass subjected to high temperature (T) annealing (>750 °C). Strong correlation was found between photogenerated current, donor concentration, and Sn concentration as determined by Mott-Schottky analysis and X-ray photoelectron spectroscopy. The effects of thermal annealing and Sn addition in the resulting microstructure and optical properties of hematite films deposited on fused silica substrates were determined by a combination of structural characterization techniques and spectroscopic ellipsometry. Thermal annealing (>600 °C) induces a higher optical absorption that is associated directly to film densification and grain growth; however, it promotes no changes in the energy positions of the main Fe{sub 2}O{sub 3} electronic transitions. The band gap energy was found to be 2.21 eV and independent of microstructure and of Sn concentration for all studied films. On the other hand, Sn can be incorporated in the Fe{sub 2}O{sub 3} lattice for concentration up to Sn/Fe ∼2%, leading to an increase in energy split of the main absorption peak, attributed to a distortion of the Fe{sub 2}O{sub 3} lattice. For higher concentrations, Sn incorporation leads to a reduction in absorption, associated with higher porosity and the formation of a secondary Sn-rich phase. In summary, the variation in the optical properties induced by thermal annealing and Sn addition cannot account for the order of magnitude increase of the current density generated by photoanodes annealed at high T (>750 °C); thus, it is concluded that the major contribution for the enhanced PEC performance comes from improved electronic properties induced by the n-type doping caused by Sn diffusion from the SnO{sub 2}:F substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Containerless laser-induced flourescence study of vaporization and optical properties for sapphire and alumina

Evaporation of aluminum oxide was studied from 1800 to 2327 K by laser-induced flourescence (LIF) detection of Al atom vapor over sapphire and alumina spheres that were levitated in an argon gas jet and heated with a continuous wave CO2 laser. Optical properties were determined from apparent specimen temperatures measured with an optical pyrometer and true temperatures deduced from the LIF intensity versus temperature measurements using the known temperature dependence of the Al atom vapor concentration in equilibrium with Al2O3. The effects of impurities and dissolved oxygen on the high-temperature optical properties of aluminum oxide were discussed.

Nordine, Paul C.↗

Optical properties of KD*P modulators

Longitudinal KD*P modulators are used in ground-based solar magnetographs to eliminate seeing effects. Although the modulators can be used as variable retarders, the optical properties when zero voltage is applied influences the performance on instruments requiring very accurate polarization measurements. Measurements at the Marshall Space Flight Center are discussed in terms of the optical properties of KD*P modulators when zero voltage is applied. The measurements can be used to predict the modulation characteristics of the devices and to determine the polarization accuracy that can be expected from the vector magnetograph.

West, E. A.↗

Characterization of core–shell nanostructure consisting Si–Au–SiO{sub 2} based on manipulation of optical properties

In this article, we investigated some physical characteristics of core–shell nanostructure in optical regime and perturbation has been also introduced as an effective method in shaping of optical properties. The proposed nanostructures are composed of the selected materials as: Silicon, Silicon Dioxide and Gold. At first, the extinction cross section spectra are calculated for multilayer core–shell nanostructures in optical range and the configuration effect of the constructed materials in a multilayer nanostructure are investigated for determination of Plasmon range. Then, the new structures of core–shell nanoparticles (gold–silicon) are presented, which have an amount of impurity particle in their shells as perturbation and also their extinction cross section spectra are calculated. The obtained results in this article give a proper approach about perturbation effect in broadening, sharpening and shifting of optical response which are decisive factors especially nano-network systems. Indeed, it has been proposed that the impurity particles in the shells can be a mechanism for tuning of optical characteristics of the presented nanoparticles in practical fields and also creation of local oscillations as plasmonic resonances in a considered optical range. Besides, redshift in extinction cross section can be also created by particle perturbation. At the end, the effective permittivity of the perturbed core-shells are extracted. The optional frequency range is selected between 300 and 900 (THz).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural, mechanical and optical properties research of a carbon ion-irradiated Y 2 SiO 5 crystal

Ion irradiation has been a popular method to modify properties of different kinds of materials. Ion-irradiated crystals have been studied for years, but the effects on microstructure and optical properties during irradiation process are still controversial. In this study, we used 6 MeV C ions with a fluence of 1 × 10 15 ion/cm 2 irradiated Y 2 SiO 5 (YSO) crystal at room temperature, and discussed the influence of C ion irradiation on the microstructure, mechanical and optical properties of YSO crystal by Rutherford backscattering/channeling analyzes (RBS/C), X-ray diffraction patterns (XRD), Raman, nano-indentation test, transmission and absorption spectroscopy, the prism coupling and the end-facet coupling experiments. We also used the secondary ion mass spectrometry (SIMS) to analyze the elements distribution along sputtering depth. Finally, 6 MeV C ions with a fluence of 1 × 10 15 ion/cm 2 irradiated caused the deformation of YSO structure and also influenced the spectral properties and lattice vibrations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulation of the transport, vertical distribution, optical properties and radiative impact of smoke aerosols with the ALADIN regional climate model during the ORACLES-2016 and LASIC experiments

Estimates of the direct radiative effect (DRE) from absorbing smoke aerosols over the southeast Atlantic Ocean (SAO) require simulation of the microphysical and optical properties of stratocumulus clouds as well as of the altitude and shortwave (SW) optical properties of biomass burning aerosols (BBAs). In this study, we take advantage of the large number of observations acquired during the ObseRvations of Aerosols above Clouds and their intEractionS (ORACLES-2016) and Layered Atlantic Smoke Interactions with Clouds (LASIC) projects during September 2016 and compare them with datasets from the ALADIN-Climate (Aire Limitée Adaptation dynamique Développement InterNational) regional model. The model provides a good representation of the liquid water path but the low cloud fraction is underestimated compared to satellite data. The modeled total-column smoke aerosol optical depth (AOD) and above-cloud AOD are consistent ( ~0.7 over continental sources and ~0.3 over the SAO at 550 nm) with the Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2), Ozone Monitoring Instrument (OMI) or Moderate Resolution Imaging Spectroradiometer (MODIS) data. The simulations indicate smoke transport over the SAO occurs mainly between 2 and 4 km, consistent with surface and aircraft lidar observations. The BBA single scattering albedo is slightly overestimated compared to the Aerosol Robotic Network (AERONET) and more significantly when compared to Ascension Island surface observations. The difference could be due to the absence of internal mixing treatment in the ALADIN-Climate model. The SSA overestimate leads to an underestimation of the simulated SW radiative heating compared to ORACLES data. ALADIN-Climate simulates a positive (monthly mean) SW DRE of about +6 W m -2 over the SAO (20 ° S–10 ° N and 10 ° W–20 ° E) at the top of the atmosphere and in all-sky conditions. Over the continent, the presence of BBA is shown to significantly decrease the net surface SW flux, through direct and semi-direct effects, which is compensated by a decrease (monthly mean) in sensible heat fluxes ( -25 W m -2 ) and surface land temperature ( -1.5 ° C) over Angola, Zambia and the Democratic Republic of the Congo, notably. The surface cooling and the lower tropospheric heating decrease the continental planetary boundary layer height by about ~200 m.

54 ENVIRONMENTAL SCIENCES↗

Solvent Polarity Effect on Chain Conformation, Film Morphology, and Optical Properties of a Water-Soluble Conjugated Polymer

The solvent polarity effect on chain conformation, film morphology, and photophysical properties of a nonionic water-soluble conjugated polymer (WSCP), poly[2,5-bis(diethylaminetetraethylene glycol)phenylene vinylene] (DEATG-PPV) is investigated in detail. The combination of stationary absorption and photoluminescence (PL) spectroscopy, time-resolved PL spectroscopy, and fluorescence correlation spectroscopy methods enables us to probe the chain conformation of DEATG-PPV, down to the level of a single chain when working with extremely diluted solutions. The use of correlated atomic force microscopy and confocal fluorescence lifetime imaging microscopy measurements of drop-casted DEATG-PPV films reveals the intrinsic relationship between chain conformation, film morphology, and optical properties. Depending on solvent polarity, DEATG-PPV presents extended, coiled, and collapsed chain conformations in solutions, which lead to distinct morphology and optical properties in solid films. Our work presents a pathway to control and characterize the film morphologies of WSCPs toward the optimal performance of various optoelectronic devices.

36 MATERIALS SCIENCE↗

Initial Validation and Results of Geoscience Laser Altimeter System Optical Properties Retrievals

Verification of Geoscience Laser Altimeter System (GLAS) optical retrievals is . problematic in that passage over ground sites is both instantaneous and sparse plus space-borne passive sensors such as MODIS are too frequently out of sync with the GLAS position. In October 2003, the GLAS Validation Experiment was executed from NASA Dryden Research Center, California to greatly increase validation possibilities. The high-altitude NASA ER-2 aircraft and onboard instrumentation of Cloud Physics Lidar (CPL), MODIS Airborne Simulator (MAS), and/or MODIS/ASTER Airborne Simulator (MASTER) under-flew seven orbit tracks of GLAS for cirrus, smoke, and urban pollution optical properties inter-comparisons. These highly calibrated suite of instruments are the best data set yet to validate GLAS atmospheric parameters. In this presentation, we will focus on the inter-comparison with GLAS and CPL and draw preliminary conclusions about the accuracies of the GLAS 532nm retrievals of optical depth, extinction, backscatter cross section, and calculated extinction-to-backscatter ratio. Comparisons to an AERONET/MPL ground-based site at Monterey, California will be attempted. Examples of GLAS operational optical data products will be shown.

Hlavka, Dennis L.↗

Spectroscopic ellipsometry investigations of the optical properties of manganese doped bismuth vanadate thin films

The optical properties of Bi{sub 2}V{sub 1-x}Mn{sub x}O{sub 5.5-x} {l_brace}x = 0.05, 0.1, 0.15 and 0.2 at.%{r_brace} thin films fabricated by pulsed laser deposition on platinized silicon substrates were studied in UV-visible spectral region (1.51-4.17 eV) using spectroscopic ellipsometry. The optical constants and thicknesses of these films have been obtained by fitting the ellipsometric data ({Psi} and {Delta}) using a multilayer four-phase model system and a relaxed Lorentz oscillator dispersion relation. The surface roughness and film thickness obtained by spectroscopic ellipsometry were found to be consistent with the results obtained by atomic force and scanning electron microscopy. The refractive index measured at 650 nm does not show any marginal increase with Mn content. Further, the extinction coefficient does not show much decrease with increasing Mn content. An increase in optical band gap energy from 2.52 to 2.77 eV with increasing Mn content from x = 0.05 to 0.15 was attributed to the increase in oxygen ion vacancy disorder.

36 MATERIALS SCIENCE↗

Study of the Optical Properties of CdZnSe/ZnS-Quantum Dot–Au-Nanoparticle Complexes

The interaction of gold nanoparticles (NPs) and semiconductor alloyed CdZnSe/ZnS quantum dots (QDs) in colloidal solutions is studied. It is shown that the photoluminescence intensity of QDs in a mixture decreases compared to that in the initial QD solution, which is caused by resonance nonradiative energy transfer from QDs to Au NPs in spontaneously formed aggregates. To control the formation of pairs of interacting QDs and Au NPs, we proposed have a method for creating QD–Au NP complexes bound by special molecules—ligands. It is shown that the morphology and optical properties of the samples obtained depend on the method of their preparation, in particular, on the chemical environment of QDs. It is found that the complexes form in the case of addition of hydrophilic Au NPs to hydrophobic QDs and that this almost does not change the optical properties of the latter compared to those of quasi-isolated QDs in colloidal solution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Variable optical properties of light-harvesting complex II revisited

Understanding photosynthetic light harvesting requires knowledge of the molecular mechanisms that dissipate excess energy in thylakoids. However, it remains unclear how the physical environment of light-harvesting complex II (LHCII) influences the process of chlorophyll de-excitation. Here, we demonstrate that protein-protein interactions between LHCIIs affect the optical properties of LHCII and thus influence the total energy budget. Aggregation of LHCII in the dark altered its absorption properties, independent of the amount of prior light exposure. We also revisited the triplet excited state involved in light-induced fluorescence quenching and found another relaxation pathway involving emission in the green region, which might be related to triplet excited energy transfer to neighboring carotenoids and annihilation processes that result in photoluminescence. LHCII- containing liposomes with different protein densities exhibited altered fluorescence and scattering properties. Our results suggest that macromolecular reorganization affects overall optical properties, which need to be addressed to compare the level of energy dissipation.

Iwai, Masakazu↗

Effect of epitaxial strain on the optical properties of NaOsO 3

We study the electronic and optical properties of NaOsO 3 under epitaxial strain using first principles methods. Structural optimization shows important changes with strain in the structural parameters such as the Os O bond lengths and the octahedral rotation angles. The key change in the electronic structure is the band gap, which increases with compressive epitaxial strain and decreases with tensile strain. The computed optical absorption coefficient is more or less isotropic for the unstrained structure for light polarization along the three crystallographic directions, but for the strained structure, it is enhanced if the light polarization is along a compressed crystallographic direction due to strain. This is explained in terms of the admixture of Os ( p ) orbitals with the Os ( d ) states that form the valence and the conduction bands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure-Optical Property Correlations of Arsenic Sulfide Glasses in Visible, Infrared, and Sub-millimeter Regions

Optical properties and structural aspects of AsxS100-x glasses from visible to terahertz wavelengths were explored. A series of annealed, bulk AsxS100-x glasses (x = 30 to 42) were made and their refractive indices determined at terahertz, infrared, and visible frequencies using a combination of a quasi-optical backwards wave oscillator spectrometer for terahertz measurements and a prism coupler for visible and infrared measurements. It was found that refractive index at all frequencies increases with arsenic composition up to 40 atomic % arsenic then decreases with additional arsenic. Structure in x-ray diffraction patterns support the notion of a minimum volume at 40 atomic %, while the average covalent coordination number indicates the rigidity percolation threshold is reached there. At As concentrations > 40 atomic %, the network becomes over-constrained, the molar volume increases.

36 MATERIALS SCIENCE↗

Effect of catalyst concentration on size, morphology and optical properties of silica nanoparticles

Today, nanomaterials play a key role in various fields such as electronics, aerospace, pharmaceuticals and biomedical because of their unique physical, chemical and biological properties which are different from bulk materials. Nano sized silica particles have gained the prominent position in scientific research and have wide applications. The sol-gel method is the best method to synthesize silica nanoparticles because of its potential to produce monodispersed with narrow size distribution at mild conditions. The silica nanoparticles were obtained by hydrolysis of tetraethyl orthosilicate (TEOS) in ethanol act as solvent. The synthesized nanoparticles were characterized by Field Emission Scanning electron Microscope (FE-SEM), UV Spectrometer. The smallest size of silica particles is around 150nm examined by using FE-SEM. The optical properties and band structure was analyzed using UV-visible spectroscopy which is found to be increase by reducing the size of particles. Concentration effect of catalyst on the size, morphology and optical properties were analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗