Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Synthesis, characterization and magnetic behavior of Co/MCM-41 nano-composites

Synthesis, structure and magnetic properties of Co/MCM-41 as magnetic nano-composites have been investigated. Mesoporous materials with different degrees of metal loading were prepared by wet impregnation and characterized by ICP, XRD, N{sub 2} adsorption, UV–vis DRS, TPR and EPMA-EDS. Cobalt oxide clusters and Co{sub 3}O{sub 4} nano-particles could be confined inside the mesopores of MCM-41, being this fact favored by the Co loading increasing. In addition, larger crystals of Co{sub 3}O{sub 4} detectable by XRD also grow on the surface when the Co loading is enhanced. The magnetic characterization was performed in a SQUID magnetometer using a maximum magnetic applied field µ{sub 0}Ha=1 T. While the samples with the higher Co loadings showed a behavior typically paramagnetic, a superparamagnetic contribution is more notorious for lower loadings, suggesting high Co species dispersion. - Graphical abstract: Room temperature hysteresis loops as a function of the Co content. Display Omitted - Highlights: • Co species as isolated Co{sup 2+}, oxide clusters and Co{sub 3}O{sub 4} nano-particles were detected. • For higher Co loads were detected, by XRD, Co{sub 3}O{sub 4} particles on the external surface. • The confining of Co species inside the mesopores was achieved by increasing Co load. • Paramagnetism from oxide clusters/nano-particles becomes dominant for higher Co loads. • Superparamagnetism can be assigned to Co species of small size and finely dispersed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New ternary phosphides and arsenides. Syntheses, crystal structures, physical properties of Eu{sub 2}ZnP{sub 2}, Eu{sub 2}Zn{sub 2}P{sub 3} and Eu{sub 2}Cd{sub 2}As{sub 3}

Three new europium pnictides Eu{sub 2}ZnP{sub 2}, Eu{sub 2}Zn{sub 2}P{sub 3} and Eu{sub 2}Cd{sub 2}As{sub 3} have been synthesized and their structures were determined by single-crystal X-ray diffraction. Eu{sub 2}ZnP{sub 2} is isotypic with Yb{sub 2}CdSb{sub 2} (Cmc2{sub 1} (No. 36); cell parameters a=4.1777(7) Å, b=15.925(3) Å, c=7.3008(12) Å), while the latter two compounds crystallize with the Ba{sub 2}Cd{sub 2}Sb{sub 3} structure type (C2/m (No. 12); cell parameters a=15.653(5)/16.402(1) Å, b=4.127(1)/4.445(4) Å, c=11.552(4)/12.311(1) Å and β=126.647(4)/126.515(7)° for Eu{sub 2}Zn{sub 2}P{sub 3} and Eu{sub 2}Cd{sub 2}As{sub 3}, respectively). Magnetic susceptibility measurements in the interval 5–300 K confirm paramagnetic behavior and effective magnetic moments characteristic of Eu{sup 2+} ([Xe] 4f{sup 7}) ground states. Temperature-dependent electrical conductivity measurements also prove that Eu{sub 2}Cd{sub 2}As{sub 3} is a semiconducting compound with a narrow band gap of 0.059 eV below 100 K. According to TG/DSC analyses, Eu{sub 2}Cd{sub 2}As{sub 3} starts to decompose at about 950 K. - Graphical abstract: A polyhedral view of the crystal structure of new pnictides Eu{sub 2}T{sub 2}Pn{sub 3} (T=Zn or Cd; Pn=P or As). Display Omitted - Highlights: • Three new ternary pnictide Zintl compounds, Eu{sub 2}ZnP{sub 2}, Eu{sub 2}Zn{sub 2}P{sub 3} and Eu{sub 2}Cd{sub 2}As{sub 3}, have been synthesized and characterized. • The europium cations are divalent and ferromagnetically coupled in both Eu{sub 2}Zn{sub 2}P{sub 3} and Eu{sub 2}Cd{sub 2}As{sub 3}. • Eu{sub 2}Cd{sub 2}As{sub 3} has a very small band gap of 0.06 eV and starts to decompose over 950 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic structure of Sr{sub 2}Fe{sub 2}O{sub 5} brownmillerite by single-crystal Mössbauer spectroscopy

In order to determine orientation of the Fe{sup 3+} magnetic moments and electric field gradient (efg) axes in the brownmillerite-type strontium ferrite structure for both iron sublattices where the efg tensor is not axially symmetric, the Mössbauer spectra of powdered and oriented single-crystal Sr{sub 2}Fe{sub 2}O{sub 5} were analyzed by solving the complete Hamiltonian for hyperfine interactions in the excited and ground states of the {sup 57}Fe nuclei. The magnetic moments of both octahedrally and tetrahedrally coordinated iron cations lie on the ac-plane of the orthorhombic unit cell and are parallel to the shortest c-axis, whilst the main efg axes are parallel to the longest crystallographic axis, b. This orientation is similar to that in Ca{sub 2}Fe{sub 2}O{sub 5}, in spite of the structural differences of strontium and calcium ferrite brownmillerites at low temperatures. - Graphical abstract: Mössbauer spectra of powdered and oriented single-crystal Sr{sub 2}Fe{sub 2}O{sub 5}, analyzed by solving the complete Hamiltonian for hyperfine interactions in the excited and ground states of the {sup 57}Fe nuclei, show that the magnetic moments of both octahedrally and tetrahedrally coordinated iron cations are parallel to the shortest c-axis of the orthorhombic brownmillerite unit cell . Display Omitted - Highlights: • Single-crystal Mössbauer spectroscopy is used to study magnetic structure of Sr{sub 2}Fe{sub 2}O{sub 5}. • Complete Hamiltonian for hyperfine interactions in excited and ground states was solved. • Fe{sup 3+} magnetic moments are parallel to the shortest crystallographic axis c. • The orientation of nuclear electric field gradient is similar to that in Ca{sub 2}Fe{sub 2}O{sub 5}.

36 MATERIALS SCIENCE↗

The synthesis, single-crystal structure, optical absorption, and resistivity of Th{sub 2}GeSe{sub 5}

The compound Th{sub 2}GeSe{sub 5} has been synthesized by the reaction of the elements at 1273 K. From a single-crystal study Th{sub 2}GeSe{sub 5} crystallizes in the Ba{sub 5}Si{sub 3} structure type with four formula units in the space group D{sup 8}{sub 4h}−P4/ncc of the tetragonal system in a cell with dimensions a=7.4968(4) Å and c=13.6302(9) Å at 100(2) K. From optical absorption measurements Th{sub 2}GeSe{sub 5} is found to have an optical band gap of 1.92 eV (indirect) or 1.98 eV (direct), consistent with its red color. Th{sub 2}GeSe{sub 5} is a wide gap semiconductor, as indicated by its electrical resistivity at 298 K of 4.37(2)×10{sup 9} Ω cm measured on a single crystal. - Graphical abstract: The structure of Th{sub 2}GeSe{sub 5}. Display Omitted - Highlights: • The new compound Th{sub 2}GeSe{sub 5} was synthesized from the elements and recrystallized from Sb{sub 2}Se{sub 3}. • Th{sub 2}GeSe{sub 5} crystallizes in the Ba{sub 5}Si{sub 3} structure type. • The band gap of Th{sub 2}GeSe{sub 5} is1.92 eV and its resistivity shows it to be a wide gap semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From fluorite to pyrochlore: Characterisation of local and average structure of neodymium zirconate, Nd{sub 2}Zr{sub 2}O{sub 7}

The structural characterisation of Nd{sub 2}Zr{sub 2}O{sub 7} prepared via a precursor route was performed using a combination of local and average structure probes (neutron total scattering, X-ray and neutron diffraction). We present the first total scattering and reverse Monte Carlo (RMC) modelling study of Nd{sub 2}Zr{sub 2}O{sub 7}, which provides compelling evidence for the adoption of a disordered fluorite-type structure by Nd{sub 2}Zr{sub 2}O{sub 7} prepared by a low-temperature precursor route. Annealing the material at high temperatures leads to a transformation to a pyrochlore-type structure; however, Rietveld refinement using powder neutron diffraction data shows that the oxygen sublattice retains a degree of disorder. - Graphical abstract: Display Omitted - Highlights: • The first total scattering and RMC modelling study of Nd{sub 2}Zr{sub 2}O{sub 7}. • Demonstration that the synthetic route influences the crystal structure adopted. • Insight into the importance of total scattering in studies of complex superstructures, especially for nano-sized materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-induced volume collapse and structural phase transitions in SrRuO{sub 3}

We report on the low temperature (6 K) structural properties of SrRuO{sub 3} under quasi-hydrostatic pressure studied by synchrotron X-ray powder diffraction in a diamond anvil cell. First principle calculations predict a first-order perovskite (Pv) to post-perovskite (pPv) phase transition at ∼40 GPa accompanied by a 1.9% volume collapse. Our results rule out the occurrence of a pPv phase to 54 GPa. Instead, we find a Pv to monoclinic to triclinic sequence of phase transitions. The monoclinic to triclinic phase transition at ∼38 GPa is accompanied by a 3.5% volume collapse. X-ray absorption spectroscopy indicates that this volume collapse is not accompanied by a change in Ru valence state. Our results should help guide improvements to theoretical treatments of this and other correlated d-electron systems based on density functional theory. - Graphical abstract: Unit cell volume as a function of pressure (T=6 K). Black squares and red circles correspond to Ne and He pressure media, respectively. Blue dashed lines are fit to the data before the volume collapse using a second-order Birch–Murnaghan equation of state excluding (lower curve) and including (upper curve) neutron diffraction data for the low temperature, ambient pressure volume. Dashed lines denote structural phase boundaries. Display Omitted - Highlights: • Crystal structure of SrRuO3 was studied under high pressure up to 54 GPa. • Pv to monoclinic to triclinic sequence of phase transitions was observed. • Transition to triclinic phase at ∼38 GPa is accompanied by a 3.5% volume collapse. • Volume collapse in SrRuO3 is not driven by a change in Ru valence state. • Pv-to-pPv phase transition predicted by DFT at 40 Gpa is not observed up to 54 GPa.

36 MATERIALS SCIENCE↗

On the crystal energy and structure of A{sub 2}Ti{sub n}O{sub 2n+1} (A=Li, Na, K) titanates by DFT calculations and neutron diffraction

First-principles quantum-mechanical calculations (CRYSTAL09 code, B3LYP functional) were performed on alkali titanates A{sub 2}Ti{sub n}O{sub 2n+1} with layered structure (n=3,4,6). Monoclinic structural types with unshifted (P2{sub 1}/m) and with shifted (C2/m) layers were considered. Crystal energies and full structural details were obtained for all Li, Na, and K phases. Neutron diffraction data were collected on powder samples of P2{sub 1}/m-Li{sub 2}Ti{sub 3}O{sub 7} (a=9.3146(3), b=3.7522(1), c=7.5447(3) Å, β=97.611(4)°) and C2/m-K{sub 2}Ti{sub 4}O{sub 9} (a=18.2578(8), b=3.79160(9), c=12.0242(4) Å, β=106.459(4)°) and their structures were Rietveld-refined. Computed energies show the P2{sub 1}/m arrangement as favoured over the C2/m one for n=3, and the opposite holds for n=6. In the n=4 case the P2{sub 1}/m configuration is predicted to be more stable for Li and Na, and the C2/m one for K titanates. Analysis of Li–O and K–O crystal-chemical environments from experiment and theory shows that the alkali atom bonding is stabilized/destabilized in the different phases consistently with the energy trend. - Graphical abstract: Display Omitted - Highlights: • The P2{sub 1}/m structure-type is found to be more stable for A{sub 2}Ti{sub 3}O{sub 7} layer titanates. • The C2/m structure-type is found to be more stable for A{sub 2}Ti{sub 6}O{sub 13} layer titanates. • Tetratitanates are predicted to prefer the P2{sub 1}/m (Li and Na) or C2/m (K) structure. • Li–O and K–O bond distances follow a trend consistent with computed phase energies.

36 MATERIALS SCIENCE↗

Designing new n=2 Sillen–Aurivillius phases by lattice-matched substitutions in the halide and [Bi{sub 2}O{sub 2}]{sup 2+} layers

A new n=2 Sillen–Aurivillius compound Bi{sub 3}Sr{sub 2}Nb{sub 2}O{sub 11}Br has been synthesised based on Bi{sub 3}Pb{sub 2}Nb{sub 2}O{sub 11}Cl by simultaneously replacing Pb{sup 2+} with Sr{sup 2+} and Cl{sup −} with Br{sup −}. Rietveld refinements against X-ray and neutron powder diffraction data revealed a significant relative compression in the stacking axis (c-axis) of the new compound. Sr{sup 2+} doping reduces the impact of the stereochemically active 6s{sup 2} lone pair found on Pb{sup 2+} and Bi{sup 3+}, resulting in a contraction of the c-axis by 1.22% and an expansion of the ab plane by 0.25%. This improves the inter-layer compatibility with the larger halide Br{sup −}. Analysis of X-ray absorption near-edge spectroscopy data show that the ferroelectric distortion of the B-site cation is less apparent in Bi{sub 3}Sr{sub 2}Nb{sub 2}O{sub 11}Br compared to Bi{sub 3}Pb{sub 2}Nb{sub 2}O{sub 11}Cl, and variable-temperature neutron diffraction data show no evidence for a ferroelectric distortion. - Graphical abstract: The structural expansion and contractions in the stacking axis of co-doped Sillen–Aurivillius phases. Display Omitted - Highlights: • A new Sillen–Aurivillius phase Bi{sub 3}Sr{sub 2}Nb{sub 2}O{sub 11}Br is synthesised based on Bi{sub 3}Pb{sub 2}Nb{sub 2}O{sub 11}Cl. • The stacking axis contracts although local expansion accommodates the larger halide Br. • Majority of the contraction is observed in the [Bi{sub 2}O{sub 2}]{sup 2+} layers where we replaced Pb{sup 2+} for Sr{sup 2+}. • Removing the Pb{sup 2+} lowers the lone pair effect and improves inter-layer compatibility. • XANES and NPD suggest that the ferroelectric properties are minimised or suppressed.

36 MATERIALS SCIENCE↗

Bismuth alloying properties in GaAs nanowires

First-principles calculations have been performed to investigate the structural, electronic and optical properties of bismuth alloying in GaAs nanowires. A typical model of Ga{sub 31}As{sub 31} nanowires is introduced for its reasonable band gap. The band gap of GaAs{sub 1−x}Bi{sub x} shrinks clearly with the increasing Bi concentration and the band edge shifts when spin–orbit coupling (SOC) is considered. The insertion of Bi atom leads to hybridization of Ga/As/Bi p states which contributes a lot around Fermi level. Scissor effect is involved. The optical properties are presented, including dielectric function, optical absorption spectra and reflectivity, which are also varied with the increasing of Bi concentrations. - Graphical abstract: Top view of Bi-doped GaAs nanowires. Ga, As, and Bi atoms are denoted with grey, purple and red balls, respectively. Display Omitted - Highlights: • A typical model of Ga{sub 31}As{sub 31} nanowires is introduced for its reasonable band gap. • The band gap of GaAs{sub 1−x}Bi{sub x} shrinks clearly with the increasing Bi concentration. • The band edge shifts when spin–orbit coupling (SOC) is considered. • The insertion of Bi atom leads to hybridization of Ga/As/Bi p states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical properties of zircon and scheelite lutetium orthovanadate: Experiment and first-principles calculation

Pure zircon and scheelite LuVO{sub 4} were prepared by solid state reaction and high-pressure route, respectively. Structure, elastic constants, lattice dynamics and thermodynamics of LuVO{sub 4} polymorphs were studied by experiments and first principles calculation. Calculations here are in good agreement with the experimental results. The phonon dispersions of LuVO{sub 4} polymorphs were studied by the linear response method. The calculated phonon dispersions show that zircon and scheelite LuVO{sub 4} phases are dynamically stable. Raman-active frequencies were measured and assigned to different modes according to the calculations. The internal frequencies shift downward after phase transition from zircon to scheelite. Born effective charge tensors elements for both phases are analyzed. The finite temperature thermodynamic properties of LuVO{sub 4} polymorphs were calculated from the obtained phonon density of states by quasi-harmonic approach. - Graphical abstract: Lutetium orthovanadate polymorphs were synthesized by SSR and HP methods and their physical and chemical properties, including lattice dynamical properties, were determined by DFT calculations and experiments. Display Omitted - Highlights: • Pure zircon and scheelite LuVO{sub 4} polymorphs were synthesized by solid state reaction and high-pressure route. • Chemical and physical properties of LuVO4 polymorphs were studied by experiments and first principles calculation. • Raman-active frequencies were measured and assigned to different modes according to the calculations. • Lattice dynamics of polymorphs were discussed in details.

36 MATERIALS SCIENCE↗

New double molybdate Na{sub 9}Fe(MoO{sub 4}){sub 6}: Synthesis, structure, properties

A new double molybdate Na{sub 9}Fe(MoO{sub 4}){sub 6} was synthesized using solid state reactions and studied with X-ray powder diffraction, second harmonic generation (SHG) technique, differential scanning calorimetry, X-ray fluorescence analysis, Mössbauer and dielectric impedance spectroscopy. Single crystals of Na{sub 9}Fe(MoO{sub 4}){sub 6} were obtained and its structure was solved (the space group R3{sup ¯}, a=14.8264(2), c=19.2402(3) Å, V=3662.79(9) Å{sup 3}, Z=6, R=0.0132). The structure is related to that of sodium ion conductor II-Na{sub 3}Fe{sub 2}(AsO{sub 4}){sub 3}. The basic structure units are polyhedral clusters composed of central FeO{sub 6} octahedron sharing edges with three Na(1)O{sub 6} octahedra. The clusters share common vertices with bridging MoO{sub 4} tetrahedra to form an open 3D framework where the cavities are occupied by Na(2) and Na(3) atoms. The compound melts incongruently at 904.7±0.2 K. Arrhenius type temperature dependence of electric conductivity σ has been registered in solid state (σ=6.8×10{sup −2} S cm{sup −1} at 800 K), thus allowing considering Na{sub 9}Fe(MoO{sub 4}){sub 6} as a new sodium ion conductor. - Graphical abstract: A new double molybdate Na{sub 9}Fe(MoO{sub 4}){sub 6} was synthesized and structurally characterized, its physicochemical properties were studied. Display Omitted - Highlights: • A new compound Na{sub 9}Fe(MoO{sub 4}){sub 6} was synthesized as ceramics and single crystals. • Na{sub 9}Fe(MoO{sub 4}){sub 6} structure is related to that of sodium-ion conductor II-Na{sub 3}Fe{sub 2}(AsO{sub 4}){sub 3}. • Physicochemical properties of the compound were studied. • Arrhenius plot for conductivity showed 6.8×10{sup −2} S cm{sup −1} at 800 K, E{sub a}∼0.8 eV. • Thus, Na{sub 9}Fe(MoO{sub 4}){sub 6} may be considered as a new sodium ion conductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hall mobility in tin iodide perovskite CH{sub 3}NH{sub 3}SnI{sub 3}: Evidence for a doped semiconductor

CH{sub 3}NH{sub 3}SnI{sub 3} is a metal halide perovskite that shows metallic conductivity over a wide temperature range, although ab initio calculations and optical absorption indicate that its band structure is consistent with that of an intrinsic semiconductor. Hall effect measurements of as-grown crystals give a hole concentration of about 9×10{sup 17} cm{sup −3} with rather high Hall mobility of about 200 cm{sup 2} V{sup −1} s{sup −1} at 250 K. Artificial hole doping enhances the electrical conductivity of the crystals without influencing mobility. These observations indicate that the electronic structure in stoichiometric CH{sub 3}NH{sub 3}SnI{sub 3} can be described as that of an intrinsic semiconductor with a wide valence band. This situation leads to metal-like conduction with even a trace amount of spontaneous hole doping in the as-grown crystal. - Graphical abstract: Hall effect measurements of as-grown CH{sub 3}NH{sub 3}SnI{sub 3} crystals give a hole concentration of about 9×10{sup 17} cm{sup −3}. Artificial hole doping enhances the electrical conductivity of the crystals without influencing mobility, indicating that the electronic structure of CH{sub 3}NH{sub 3}SnI{sub 3} can be described as that of an intrinsic semiconductor with a wide valence band. Display Omitted - Highlights: • Hole concentration in highly conducting CH{sub 3}NH{sub 3}SnI{sub 3} was determined. • Hall mobility was not affected by artificial hole doping. • The electronic structure can be described as that of an intrinsic semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, characterization, magnetic and electrochemical properties of a new 3D hexa-copper-substituted germanotungstate

An inorganic–organic hybrid hexa-copper-substituted germanotungstate Na{sub 2}[Cu(dap){sub 2}]{sub 2}[Cu(dap){sub 2}] ([Cu{sub 6}(H{sub 2}O){sub 2}(dap){sub 2}][B-α-GeW{sub 9}O{sub 34}]{sub 2})·4H{sub 2}O (1) (dap=1,2-diaminopropane) has been hydrothermally prepared and characterized by elemental analyses, inductively coupled plasma atomic emission spectrometry (ICP–AES) analyses, IR spectra, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA) and single-crystal X-ray diffraction. 1 displays the six-connected 3D network with the long topological (O′Keefe) vertex symbol is 4·4·6{sub 4}·4·4·4·4·6{sub 4}·4·4·4·6{sub 4}·4·4·4 and the short vertex (Schläfli) symbol of 4{sup 12}6{sup 3}. Magnetic measurements indicate that there are the overall ferromagnetic exchange interactions in the belt-like hexa-Cu{sup II} cluster in 1. Furthermore, the electrochemical behavior and electrocatalysis of 1 modified carbon paste electrode (1-CPE) have been studied. The reductions of nitrite, bromate and hydrogen peroxide are principally mediated by the W{sup VI}-based wave. - Graphical abstract: A hexa-Cu{sup II} sandwiched germanotungstate has been synthesized and structurally characterized. The magnetic, solid-state electrochemical and electrocatalytic properties have been investigated. Display Omitted - Highlights: • Transition-metal substituted polyoxometalates. • Hexa-copper-substituted germanotungstate. • Six-connected 3D network. • Electrocatalytic reduction of nitrite, bromate and hydrogen peroxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure analysis of BaCe{sub 0.8}Y{sub 0.2}O{sub 3−δ} in dry and wet atmospheres by high-temperature X-ray diffraction measurement

High temperature X-ray diffraction measurements were performed under dry and wet atmospheres to investigate phase behavior of BaCe{sub 0.8}Y{sub 0.2}O{sub 3−δ} (BCY20). In the temperature range of 30–400 °C, BCY20 was identified to be rhombohedral and monoclinic structures in dry and wet atmospheres, respectively. Larger lattice volumes were obtained in a wet atmosphere due to a chemical expansion induced by water incorporation. A gradual change in diffraction peak shape due to a phase transformation from rhombohedral to monoclinic was observed at 300 °C when moisture was introduced into the atmosphere. These results indicated clearly the dependence of phase behavior of BCY20 on partial pressure of water vapor in atmosphere. - Graphical abstract: A BaCe{sub 0.8}Y{sub 0.2}O{sub 3−δ} rhombohedral phase transited to a monoclinic phase at 300 °C when moisture was introduced into the atmosphere. Display Omitted - Highlights: • Different structures for hydrated and dehydrated BaCe{sub 0.8}Y{sub 0.2}O{sub 3−δ} (BCY20). • Slow phase transition from rhombohedral to monoclinic at 300 °C in wet atmosphere. • Chemical expansion of BCY20 in wet atmosphere. • Importance of considering moisture when discussing phase behavior of BCY20.

36 MATERIALS SCIENCE↗

Defect chemistry of phospho-olivine nanoparticles synthesized by a microwave-assisted solvothermal process

Nanocrystalline LiFePO{sub 4} powders synthesized by a microwave-assisted solvothermal (MW-ST) process have been structurally characterized with a combination of high resolution powder neutron diffraction, synchrotron X-ray diffraction, and aberration-corrected HAADF STEM imaging. A significant level of defects has been found in the samples prepared at 255 and 275 °C. These temperatures are significantly higher than what has previously been suggested to be the maximum temperature for defect formation in LiFePO{sub 4}, so the presence of defects is likely related to the rapid MW-ST synthesis involving a short reaction time (∼5 min). A defect model has been tentatively proposed, though it has been shown that powder diffraction data alone cannot conclusively determine the precise defect distribution in LiFePO{sub 4} samples. The model is consistent with other literature reports on nanopowders synthesized at low temperatures, in which the unit cell volume is significantly reduced relative to defect-free, micron-sized LiFePO{sub 4} powders. - Graphical abstract: Temperature-dependent antisite defect formation has been observed in nanocrystalline LiFePO{sub 4} powders synthesized by a microwave solvothermal process, using high resolution diffraction and STEM imaging. Display Omitted - Highlights: • LiFePO{sub 4} nanopowders synthesized by a microwave-assisted solvothermal process. • Defects directly observed by aberration-corrected HAADF STEM imaging. • Antisite defects present from synthesis at 255 and 275 °C. • Defects present from higher temperature synthesis than previously reported. • Powder diffraction data have been analyzed in detail for various defect models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation of Schottky constants with interatomic distances of selected I–VII and II–VI compounds

The observed linear (Na-, K-halides) and near-linear (Mg-, Sr-, Zn-, Cd-, and Hg-chalcogenides) dependences of Schottky constants on reciprocal interatomic distances yield the relation logK{sub S}=((s{sub s}1/T)+i{sub s})1/d{sub (A−B)}+(s{sub i}1/T)+i{sub i}, where K{sub S} is the product of metal and non-metal thermal equilibrium vacancy concentrations, and s{sub s}, i{sub s}, s{sub i} and i{sub i} are the group specific slope and intercept values obtained from an extended analysis of the above log K{sub S} versus 1/d{sub (A−B)} data. The previously reported linear dependences of log K{sub S} on the Born–Haber lattice energies [1] are the basis for combining the earlier results [1] with the Born–Mayer lattice energy equation to yield a new thermodynamic relationship, namely logK{sub S}=−(2.303nRT){sup −1}(c{sub (B−M)}/d{sub (A−B)}−I{sub e}), where c{sub (B−M)} is the product of the constants of the Born–Mayer equation and I{sub e} is the metal ionization energy of the above compounds. These results establish a correlation between point defect concentrations and basic thermodynamic, coulombic, and structural solid state properties for selected I–VII and II–VI semiconductor materials. - Graphical abstract: Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aromatic carboxylate effect on dimensionality of three bis(benzimidazole)-based cobalt(II) coordination polymers: Syntheses, structures and properties

Three new metal-organic coordination polymers [Co(4-bbc){sub 2}(bbbm)] (1), [Co(3,5-pdc)(bbbm)]·2H{sub 2}O (2) and [Co(1,4-ndc)(bbbm)] (3) (4-Hbbc=4-bromobenzoic acid, 3,5-H{sub 2}pdc=3,5-pyridinedicarboxylic acid, 1,4-H{sub 2}ndc=1,4-naphthalenedicarboxylic acid and bbbm=1,1-(1,4-butanediyl)bis-1H-benzimidazole) were hydrothermally synthesized and structurally characterized. Polymer 1 is a 1D chain formed by the bbbm ligands and Co{sup II} ions. Polymer 2 exhibits a 2D network with a (3·4·5)(3{sup 2}·4·5·6{sup 2}·7{sup 4}) topology. Polymer 3 possesses a 3D three-fold interpenetrating framework. The versatile structures of title polymers indicate that the aromatic carboxylates have an important influence on the dimensionality of 1–3. Moreover, the thermal stability, electrochemical and luminescent properties of 1–3 were investigated. - graphical abstract: Three bis(benzimidazole)-based cobalt(II) coordination polymers tuned by aromatic carboxylates were hydrothermally synthesized and structurally characterized. The aromatic carboxylates play a key role in the dimensionality of three polymers. The electrochemical and luminescent properties of three polymers were investigated. Display Omitted - Highlights: • Three bis(benzimidazole)-based cobalt(II) coordination polymers tuned by aromatic carboxylates were obtained. • The aromatic carboxylates have an important influence on the dimensionality of three polymers. • The electrochemical and luminescent properties of three polymers were investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and luminescence properties of lanthanide coordination polymers with a new semirigid bridging thenylsalicylamide ligand

Two new lanthanide coordination polymers based on a semirigid bridging thenylsalicylamide ligand ([Ln{sub 2}L{sub 3}(NO{sub 3}){sub 6}]·(C{sub 4}H{sub 8}O{sub 2}){sub 2}){sub ∞} were obtained and characterized by elemental analysis, X-ray diffraction, IR and TGA measurements. The two compounds are isostructure and possess one dimensional trapezoid ladder-like chain built up from the connection of isolated LnO{sub 3}(NO{sub 3}){sub 3} polyhedra (distorted monocapped antisquare prism) through the ligand. The photoluminescence analysis suggest that there is an efficient ligand-to-Ln(III) energy transfer in Tb(III) complex and the ligand is an efficient “antenna” for Tb(III). From a more general perspective, the results demonstrated herein provide the possibility of controlling the formation of the desired lanthanide coordination structure to enrich the crystal engineering strategy and enlarge the arsenal for developing excellent luminescent lanthanide coordination polymers. - Graphical abstract: We present herein one dimensional lanthanide coordination polymers of a new semirigid exo-bidentate ligand which not only display interesting structures but also possess strong luminescence properties. Display Omitted - Highlights: • We present lanthanide coordination polymers of a new semirigid exo-bidentate ligand. • The lanthanide coordination polymers exhibit interesting structures. • The luminescent properties of Tb(III) complexes are discussed in detail.

36 MATERIALS SCIENCE↗