Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical Representation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Recovery of interplanetary cosmic ray intensity following the great Forbush decrease of mid-1991

There was a succession of major solar flares in late-May to mid-June 1991. Their effects on cosmic ray intensity were observed by six spacecraft at various points in the heliosphere and by terrestrial neutron monitors. Study of these observations is summarized as followed: (1) An abrupt and extraordinarily large Forbush decrease in intensity occurred at the Earth on day of year (DOY) 164/1993 (13 June) and ones of similar magnitude (approximately equal 20 percent) occurred in an orderly sequence of timing thereafter over ranges of heliocentric ecliptic longitude of essentially 360 degrees; of heliographic latitude +32 degrees to -5 degrees; and of radial distance 1.0 to 53 AU. (2) The apparent radial speed of propagation of the presumably causative blast wave was 865 (+/- 75)km/s. (3) It appears likely that the distinctive solar flare of DOY 162/1991 (11 June) was the dominant cause of the blast wave. Two different representations of the subsequent recoveries of intensity yield substantially different numerical values of 'recovery time' but either set of values shows an increase by a factor of about three between 1.0 and 53 AU.

Van Allen, James A.↗

An explicit three-dimensional nonhydrostatic numerical simulation of a tropical cyclone

A nonhydrostatic numerical simulation of a tropical cyclone is performed with explicit representation of cumulus on a meso-beta scale grid and for a brief period on a meso-gamma scale grid. Individual cumulus plumes are represented by a combination of explicit resolution and a 1.5 level closure predicting turbulent kinetic energy (TKE).

Tripoli, G. J.↗

Numerical Zooming Between a NPSS Engine System Simulation and a One-Dimensional High Compressor Analysis Code

Within NASA's High Performance Computing and Communication (HPCC) program, NASA Glenn Research Center is developing an environment for the analysis/design of aircraft engines called the Numerical Propulsion System Simulation (NPSS). NPSS focuses on the integration of multiple disciplines such as aerodynamics, structures, and heat transfer along with the concept of numerical zooming between zero-dimensional to one-, two-, and three-dimensional component engine codes. In addition, the NPSS is refining the computing and communication technologies necessary to capture complex physical processes in a timely and cost-effective manner. The vision for NPSS is to create a "numerical test cell" enabling full engine simulations overnight on cost-effective computing platforms. Of the different technology areas that contribute to the development of the NPSS Environment, the subject of this paper is a discussion on numerical zooming between a NPSS engine simulation and higher fidelity representations of the engine components (fan, compressor, burner, turbines, etc.). What follows is a description of successfully zooming one-dimensional (row-by-row) high-pressure compressor analysis results back to a zero-dimensional NPSS engine simulation and a discussion of the results illustrated using an advanced data visualization tool. This type of high fidelity system-level analysis, made possible by the zooming capability of the NPSS, will greatly improve the capability of the engine system simulation and increase the level of virtual test conducted prior to committing the design to hardware.

Follen, Gregory↗

Integral Velocity Sampling for Unsteady Rotor Models on Cartesian Meshes

An unsteady body-force rotor model utilizing integral velocity sampling is developed for Cartesian meshes with a focus on accurate performance predictions. In this approach, the rotors are modeled as body-force source terms, and integral sampling is used to define the local freestream velocity vector. The method is verified in two dimensions for airfoils, providing accurate angle of attack and freestream Mach number estimates even on relatively coarse meshes, and demonstrating excellent mesh convergence across a variety of source region thicknesses. Extensions of the model to three dimensions for both fixed and rotating wings are considered, with numerical experiments demonstrating the need for a spanwise-continuous representation of the induced velocity or angle of attack. The model provides reasonable spanwise lift distributions without any explicit tip-loss model. Comparisons to high-fidelity simulations and experimental data show excellent agreement for predictions of an isolated DJI Phantom 3 propeller in hover. Finally, simulations of the full aircraft in edgewise forward flight also compare well with wind tunnel data across a variety of pitch angles and propeller speeds.

ARMD↗

On the Computation of Integral Curves in Adaptive Mesh Refinement Vector Fields

Integral curves, such as streamlines, streaklines, pathlines, and timelines, are an essential tool in the analysis of vector field structures, offering straightforward and intuitive interpretation of visualization results. While such curves have a long-standing tradition in vector field visualization, their application to Adaptive Mesh Refinement (AMR) simulation results poses unique problems. AMR is a highly effective discretization method for a variety of physical simulation problems and has recently been applied to the study of vector fields in flow and magnetohydrodynamic applications. The cell-centered nature of AMR data and discontinuities in the vector field representation arising from AMR level boundaries complicate the application of numerical integration methods to compute integral curves. In this paper, we propose a novel approach to alleviate these problems and show its application to streamline visualization in an AMR model of the magnetic field of the solar system as well as to a simulation of two incompressible viscous vortex rings merging.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectral method for a kinetic swarming model

Here we present the first numerical method for a kinetic description of the Vicsek swarming model. The kinetic model poses a unique challenge, as there is a distribution dependent collision invariant to satisfy when computing the interaction term. We use a spectral representation linked with a discrete constrained optimization to compute these interactions. To test the numerical scheme we investigate the kinetic model at different scales and compare the solution with the microscopic and macroscopic descriptions of the Vicsek model. Lastly, we observe that the kinetic model captures key features such as vortex formation and traveling waves.

97 MATHEMATICS AND COMPUTING↗

Space-energy separated representations for multigroup neutron diffusion using proper generalized decompositions

Proper generalized decomposition (PGD) can be described as a numerical extension of separation of variables and thus be employed as a solution technique for multi-dimensional problems, where dimensions should be understood in the phase-space context of the governing law at hand. This paper presents a PGD approach on efficiently solving problems involving multigroup neutron diffusion. Two PGD approaches are described: space-only and space-energy decompositions. Numerical results include 2-D and 3-D examples with two-, seven-, and 145-group structures. The PGD solutions are compared against traditional multi-dimensional finite element discretization. For few-group problems, both PGD approaches prove effective for mildly heterogeneous geometries, but showed reduced performance with increasing heterogeneity. The space-energy representation was found to be slower than the space-only approach for two-group problems, but proved more effective for seven-group problems. For even larger numbers of groups, the space-energy PGD decomposition was very effective at reducing the computational time.

42 ENGINEERING↗

Creating Feature Representations of Antibody-Antigen Complexes for Fast Binding Prediction with Machine Learning

Antibody-antigen interactions underlie the function of the immune system. Numerous computational tools exist that aim to predict important quantities associated with antibodyantigen interactions, such as binding energy. Efficient and accurate prediction of such quantities would greatly accelerate vaccine (antigen) and therapeutic antibody design. Current methods and tools, however, rely on varying degrees of computationally expensive steps that limit their use on problems that require many predictions, and moreover, no single method produces consistently accurate estimates. In this project, we determined the feasibility of creating feature representations that concisely describe interacting pairs of antibody and antigen as rapidly computable numerical vectors, given the antibody-antigen co-complex. Such a featurization will allow the use of a statistical machine learning model that jointly models the results of the disparate existing computational tools available. In turn, this will greatly enhance their combined predictive performance. We developed a feature representation consisting of 86 descriptors of the antigen-antibody interface which is then reduced into a lower dimensional representation using a neural network dimensionality reduction step. We have demonstrated that this feature representation serves its intended purpose of rapidly describing antigen-antibody pairs for the task of binding strength prediction. While this feasibility study has proven that such a feature representation is feasible, additional research is likely improve its ability to support various tasks, including binding strength prediction.

59 BASIC BIOLOGICAL SCIENCES↗

Distortion Representation of Forecast Errors for Model Skill Assessment and Objective Analysis

We proposed a novel characterization of errors for numerical weather predictions. In its simplest form we decompose the error into a part attributable to phase errors and a remainder. The phase error is represented in the same fashion as a velocity field and is required to vary slowly and smoothly with position. A general distortion representation allows for the displacement and amplification or bias correction of forecast anomalies. Characterizing and decomposing forecast error in this way has two important applications, which we term the assessment application and the objective analysis application. For the assessment application, our approach results in new objective measures of forecast skill which are more in line with subjective measures of forecast skill and which are useful in validating models and diagnosing their shortcomings. With regard to the objective analysis application, meteorological analysis schemes balance forecast error and observational error to obtain an optimal analysis. Presently, representations of the error covariance matrix used to measure the forecast error are severely limited. For the objective analysis application our approach will improve analyses by providing a more realistic measure of the forecast error. We expect, a priori, that our approach should greatly improve the utility of remotely sensed data which have relatively high horizontal resolution, but which are indirectly related to the conventional atmospheric variables. In this project, we are initially focusing on the assessment application, restricted to a realistic but univariate 2-dimensional situation. Specifically, we study the forecast errors of the sea level pressure (SLP) and 500 hPa geopotential height fields for forecasts of the short and medium range. Since the forecasts are generated by the GEOS (Goddard Earth Observing System) data assimilation system with and without ERS 1 scatterometer data, these preliminary studies serve several purposes. They (1) provide a testbed for the use of the distortion representation of forecast errors, (2) act as one means of validating the GEOS data assimilation system and (3) help to describe the impact of the ERS 1 scatterometer data.

Hoffman, Ross N.↗

Numerical solution of the time dependent Ginzburg-Landau equations for mixed (d + s)-wave superconductors

The time-dependent Ginzburg-Landau formalism for (d + s)-wave superconductors and their representation using auxiliary fields is investigated. By using the link variable method, we then develop suitable discretization of these equations. Numerical simulations are carried out for a mesoscopic superconductor in a homogeneous perpendicular magnetic field which revealed peculiar vortex states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Energy Decaying Scheme for Nonlinear Dynamics of Shells

A novel integration scheme for nonlinear dynamics of geometrically exact shells is developed based on the inextensible director assumption. The new algorithm is designed so as to imply the strict decay of the system total mechanical energy at each time step, and consequently unconditional stability is achieved in the nonlinear regime. Furthermore, the scheme features tunable high frequency numerical damping and it is therefore stiffly accurate. The method is tested for a finite element spatial formulation of shells based on mixed interpolations of strain tensorial components and on a two-parameter representation of director rotations. The robustness of the, scheme is illustrated with the help of numerical examples.

Bottasso, Carlo L.↗

Distortion Representation of Forecast Errors for Model Skill Assessment and Objective Analysis

We study a novel characterization of errors for numerical weather predictions. In its simplest form we decompose the error into a part attributable to phase errors and a remainder. The phase error is represented in the same fashion as a velocity field and will be required to vary slowly and smoothly with position. A general distortion representation allows for the displacement and a bias correction of forecast anomalies. In brief, the distortion is determined by minimizing the objective function by varying the displacement and bias correction fields. In the present project we use a global or hemispheric domain, and spherical harmonics to represent these fields. In this project we are initially focusing on the assessment application, restricted to a realistic but univariate 2-dimensional situation. Specifically we study the forecast errors of the 500 hPa geopotential height field for forecasts of the short and medium range. The forecasts are those of the Goddard Earth Observing System data assimilation system. Results presented show that the methodology works, that a large part of the total error may be explained by a distortion limited to triangular truncation at wavenumber 10, and that the remaining residual error contains mostly small spatial scales.

Hoffman, Ross N.↗

Coupling a Mesoscale Numerical Weather Prediction Model with Large-Eddy Simulation for Realistic Wind Plant Aerodynamics Simulations (Poster)

Wind plant aerodynamics are influenced by a combination of microscale and mesoscale phenomena. Incorporating mesoscale atmospheric forcing (e.g., diurnal cycles and frontal passages) into wind plant simulations can lead to a more accurate representation of microscale flows, aerodynamics, and wind turbine/plant performance. Our goal is to couple a numerical weather prediction model that can represent mesoscale flow [specifically the Weather Research and Forecasting model] with a microscale LES model (OpenFOAM) that can predict microscale turbulence and wake losses.

17 WIND ENERGY↗

Advanced modeling of $\mathrm{DER}$s and $\mathrm{UPFC}$ devices with Sparse Tableau Formulation for $\mathrm{ACOPF}$

Distributed energy resources (DERs) are projected to be significant contributors in electric power grid modernization efforts. Yet many distribution and transmission system operators are concerned about potential reliability and security impacts of high penetration of DERs, and cite the need of greater visibility and controllability of decision variables associated with these DERs. Tractable modeling of DERs in AC optimal power flow (ACOPF) is one of the barriers to their integration into the existing operation, planning and market paradigm. Similarly, as more intermittent renewable resources are deployed, power flow control becomes more valuable, and accurate representation of Flexible AC Transmission System (FACTS) devices in ACOPF will likely grow in importance. Here this paper focuses on the detailed representation of substations with the high penetration of DERs, and on the Unified Power Flow Controller (UPFC) FACTS devices, in OPF. To this end, a novel Sparse Tableau Formulation (STF) for ACOPF is used to accurately model such features as substation reconfiguration to accommodate DERs, and to represent decision variables appropriate to the voltage source converters within UPFCs. Numerical studies are provided to demonstrate the impacts of detailed DER and UPFC representations on optimal operation, and the computational efficiency.

42 ENGINEERING↗

Animation graphic interface for the space shuttle onboard computer

Graphics interfaces designed to operate on space qualified hardware challenge software designers to display complex information under processing power and physical size constraints. Under contract to Johnson Space Center, MICROEXPERT Systems is currently constructing an intelligent interface for the LASER DOCKING SENSOR (LDS) flight experiment. Part of this interface is a graphic animation display for Rendezvous and Proximity Operations. The displays have been designed in consultation with Shuttle astronauts. The displays show multiple views of a satellite relative to the shuttle, coupled with numeric attitude information. The graphics are generated using position data received by the Shuttle Payload and General Support Computer (PGSC) from the Laser Docking Sensor. Some of the design considerations include crew member preferences in graphic data representation, single versus multiple window displays, mission tailoring of graphic displays, realistic 3D images versus generic icon representations of real objects, the physical relationship of the observers to the graphic display, how numeric or textual information should interface with graphic data, in what frame of reference objects should be portrayed, recognizing conditions of display information-overload, and screen format and placement consistency.

Wike, Jeffrey↗

Desirable floating-point arithmetic and elementary functions for numerical computation

The topics considered are: (1) the base of the number system, (2) precision control, (3) number representation, (4) arithmetic operations, (5) other basic operations, (6) elementary functions, and (7) exception handling. The possibility of doing without fixed-point arithmetic is also mentioned. The specifications are intended to be entirely at the level of a programming language such as FORTRAN. The emphasis is on convenience and simplicity from the user's point of view. Conforming to such specifications would have obvious beneficial implications for the portability of numerical software, and for proving programs correct, as well as attempting to provide facilities which are most suitable for the user. The specifications are not complete in every detail, but it is intended that they be complete in spirit - some further details, especially syntatic details, would have to be provided, but the proposals are otherwise relatively complete.

Hull, T. E.↗

A multi-level solution algorithm for steady-state Markov chains

A new iterative algorithm, the multi-level algorithm, for the numerical solution of steady state Markov chains is presented. The method utilizes a set of recursively coarsened representations of the original system to achieve accelerated convergence. It is motivated by multigrid methods, which are widely used for fast solution of partial differential equations. Initial results of numerical experiments are reported, showing significant reductions in computation time, often an order of magnitude or more, relative to the Gauss-Seidel and optimal SOR algorithms for a variety of test problems. The multi-level method is compared and contrasted with the iterative aggregation-disaggregation algorithm of Takahashi.

Horton, Graham↗

Development and Verification of a Numerical Library for Solving Global Terrestrial Multiphysics Problems

Abstract Current generation Land Surface Models (LSMs) routinely simulate many nonlinear multiphysics processes. The complexity of future generation LSMs is expected to increase as critical new biophysical and biogeochemical processes are incorporated. Current generation LSMs have several shortcomings including the lack of robust numerical methods to solve discretized equations, monolithic software design that hinders testing of a process representation in isolation from other components, and absence of a flexible coupling framework to solve tightly coupled multiphysics problems. While the LSMs community vigorously evaluates the accuracy of the conceptual model to represent reality (validation), the accuracy of the numerical implementation of the conceptual model (verification) is seldom examined. Method of Manufactured Solutions is a technique for verifying complex codes when analytical solutions are unavailable. In this work, we present a stand‐alone, open source numerical library for solving global terrestrial multiphysics processes that includes a flexible coupling framework. Robust numerical solution for linear and nonlinear equations is provided via the Portable, Extensible Toolkit for Scientific Computation library. We verify the numerical library using Method of Manufactured Solutions for a range of problems comprising single and multiphysics steady state problems that are applied in one or multiple physical domains. This work provides an example of incorporating code verification as an integral part of Land Surface Model development activities.

58 GEOSCIENCES↗