Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NOX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Interferences in the chemiluminescent measurement of NO and NO2 emissions from combustion systems

Two factors which may affect the quantification of NO and NO2 concentrations when using chemiluminescent analysis are investigated. The first is the dependence of the chemiluminescent intensity on competing third body quenching reactions. Relative quenching efficiencies are determined as a function of third body concentration for six different species which are common products of combustion. A mathematical expression is derived which allows calculation of the actual concentration of NO given the indicated concentration of NO and the concentrations of the important third bodies. An example calculation is presented. The second factor which is investigated involves the conversion of low molecular weight nitrogen containing species, other than NO2, in commercial NOx converters. Conversion efficiencies for six species were determined using a commercial stainless steel catalyst at 923 K.

Matthews, R. D.↗

A computationally fast one-dimensional diffusion-photochemistry model of SST wakes

A computational technique applicable to analysis of supersonic transport (SST) wake photochemistry and diffusion is presented. Sensitivity studies of SST effluent effects upon ozone depletion are facilitated by the computational rapidity of the method. The article compares results from other studies and predictions of some variables related to global NOx input. Results indicate that the NO/NO2 ratio in an SST wake at photochemical equilibrium is a sensitive function of photolysis rates.

Matloff, G. L.↗

Solar proton event - Influence on stratospheric ozone

Large-scale reductions in the ozone content of the middle and upper stratosphere over the polar cap regions were associated with the major solar proton event of 4 August 1972. This reduction, which was determined from measurements with the backscattered ultraviolet experiment on the Nimbus 4 satellite, is interpreted as being due to the catalytic destruction of ozone by odd-nitrogen compounds (NOx) produced by the event.

Heath, D. F.↗

STRATCOM-8 scientific objectives and mission orginization

Stratospheric photochemistry was studied, with emphasis on the Ozone-NOx-ultraviolet flux interactions, but also including members of the chlorine, water vapor, and carbon-containing families. Secondary objectives include: (1) study of the balloon environment, (2) comparison of independent measurements of ozone and of NO, (3) development of new sensor systems; and (4) some measurements for exploratory purposes. Most, but not all, systems and instruments performed as planned, and it is believed that data are available to achieve most of the planned scientific and engineering objectives. The emphasis on photochemistry in the 35 to 40 km region is greater than anticipated, and observations are more complete for sunset than for sunrise. The planned instruments and a summary of the flight operations is discussed partly for the mutual information of those participating and partly for the wider scientific community.

Reed, E. I.↗

Satellite observations of the global distribution of stratospheric ozone

Observations of backscattered radiation from an Orbiting Geophysical Observatory (OGO) Satellite were used to determine the global distribution of ozone in different layers in the middle and upper stratosphere. The derived distributions show significant seasonal and geographic variations with important differences indicated between winter and summer hemisphere distributions. The OGO derived distributions are compared with other observations (rocket and satellite) and with photochemical calculations. It is suggested that the increased ozone mixing ratio in the high latitude winter hemisphere can be accounted for by transport processes up to about 40-45 km and by the effects of seasonal variations of NOX, HOX and temperature in the region above.

London, J.↗

Definition of air quality measurements for monitoring space shuttle launches

A description of a recommended air quality monitoring network to characterize the impact on ambient air quality in the Kennedy Space Center (KSC) (area) of space shuttle launch operations is given. Analysis of ground cloud processes and prevalent meteorological conditions indicates that transient HCl depositions can be a cause for concern. The system designed to monitor HCl employs an extensive network of inexpensive detectors combined with a central analysis device. An acid rain network is also recommended. A quantitative measure of projected minimal long-term impact involves the limited monitoring of NOx and particulates. All recommended monitoring is confined ti KSC property.

Thorpe, R. D.↗

Evaluation of Federal Aviation Administration ion engine exhaust sampling rake

A FAA exhaust emissions rake was tested in the Experimental Clean Combustor Program, Phase 3 to permit comparison of the values of gaseous emissions and smoke measured by the FAA rake with those measured with the NASA Pratt and Whitney Aircraft (P and WA) rake used in the Phase 3 Experimental Clean Combustor Program and with station seven probes. The results showed that the levels of CO, THC, NOx and smoke measured by the FAA and NASA/P and WA rakes agree well at high power, but that CO emissions measured by the FAA rake were approximately 10 percent higher than those measured by the NASA/P and WA rake at low power.

Fiorentino, A. J.↗

Reduction of aircraft gas turbine engine pollutant emissions

To accomplish simultaneous reduction of unburned hydrocarbons, carbon monoxide, and oxides of nitrogen, required major modifications to the combustor. The modification most commonly used was a staged combustion technique. While these designs are more complicated than production combustors, no insurmountable operational difficulties were encountered in either high pressure rig or engine tests which could not be resolved with additional normal development. The emission reduction results indicate that reductions in unburned hydrocarbons were sufficient to satisfy both near and far-termed EPA requirements. Although substantial reductions were observed, the success in achieving the CO and NOx standards was mixed and depended heavily on the engine/engine cycle on which it was employed. Technology for near term CO reduction was satisfactory or marginally satisfactory. Considerable doubt exists if this technology will satisfy all far-term requirements.

Diehl, L. A.↗

An assessment of the effect of supersonic aircraft operations on the stratospheric ozone content

An assessment of the potential effect on stratospheric ozone of an advanced supersonic transport operations is presented. This assessment, which was undertaken because of NASA's desire for an up-to-date evaluation to guide programs for the development of supersonic technology and improved aircraft engine designs, uses the most recent chemical reaction rate data. From the results of the present assessment it would appear that realistic fleet sizes should not cause concern with regard to the depletion of the total ozone overburden. For example, the NOx emission of one type designed to cruise at 20 km altitude will cause the ozone overburden to increase by 0.03% to 0.12%, depending upon which vertical transport is used. These ozone changes can be compared with the predictions of a 1.74% ozone decrease (for 100 Large SST's flying at 20 km) made in 1974 by the FAA's Climatic Impact Assessment Program.

Poppoff, I. G.↗

Aircraft gas turbine low-power emissions reduction technology program

Advanced aircraft turbine engine combustor technology was used to reduce low-power emissions of carbon monoxide and unburned hydrocarbons to levels significantly lower than those which were achieved with current technology. Three combustor design concepts, which were designated as the hot-wall liner concept, the recuperative-cooled liner concept, and the catalyst converter concept, were evaluated in a series of CF6-50 engine size 40 degree-sector combustor rig tests. Twenty-one configurations were tested at operating conditions spanning the design condition which was an inlet temperature and pressure of 422 K and 304 kPa, a reference velocity of 23 m/s and a fuel-air-ration of 10.5 g/kg. At the design condition typical of aircraft turbine engine ground idle operation, the best configurations of all three concepts met the stringent emission goals which were 10, 1, and 4 g/kg for CO, HC, and Nox, respectively.

Dodds, W. J.↗

Aircraft HO sub x and NO sub x emission effects on stratospheric ozone and temperature

A simplified two-dimensional steady-state photochemical model of the atmosphere was developed. The model was used to study the effect on the thermal and chemical structure of the atmosphere of two types of pollution cases: (1) injection of NOx and HOx from a hypothetical fleet of supersonic and subsonic aircraft and (2) injection of HOx from a hypothetical fleet of liquid-fueled hydrogen aircraft. The results are discussed with regard to stratospheric perturbations in ozone, water vapor and temperature.

Glatt, L.↗

Interferences in chemiluminescent measurement of NO and NO2 emissions from combustion systems

Two factors that may affect the quantification of NO and NO2 concentrations when using chemiluminescent analysis are investigated. The first is the dependence of the chemiluminescent intensity on competing third body quenching reactions. Relative quenching efficiencies are determined as a function of third body concentration for six different species that are common products of combustion. A mathematical expression is derived that allows calculation of the actual concentration of NO, given the indicated concentration of NO and the concentrations of the important third bodies. An example calculation is presented. The second factor investigated involves the conversion to NO of low molecular weight nitrogen-containing species, other than NO2, in commercial NOx converters. Conversion efficiencies for six species are determined using a commercial stainless steel catalyst at 920 K.

Matthews, R. D.↗

Temporal and latitudinal variations of stratospheric trace gases - A critical comparison between theory and experiment

Global calculations of stratospheric HOx, Clx, and NOx are presented which include the effects of planetary albedo and diurnal and seasonal variations of the insolation. Comparisons are made with a wide range of atmospheric measurements at different latitudes and altitudes. Agreement between theory and observations is generally within a factor of 2. The theory appears to explain adequately the major features of latitude and seasonal distributions of NO2 and HNO3. The results indicate that mesospheric OH makes an appreciable contribution to the total OH column abundance and strongly suggest that nitrogen oxides exist principally in the form of HNO3 at high latitudes in winter. There are difficulties in reconciling OH, ClO, and O3 observations in the upper stratosphere.

Wofsy, S. C.↗

Launch vehicle effluent measurements during the August 20, 1977, Titan 3 launch at Air Force Eastern Test Range

Airborne effluent measurements within the launch cloud and visible and infrared measurements of cloud physical behavior are discussed. Airborne effluent measurements include concentrations of HCl, Cl2, NO, NOX, and particulates as a function of time during each sampling pass through the exhaust cloud. The particle size distribution was measured for each pass through the cloud. Mass concentration as a function of particle diameter was measured over the size range of 0.05- to 25 micron diameter, and particle number density was measured as a function of diameter over a size range of 0.5 to 7.5 micron. Effluent concentrations in the cloud ranged from about 30 ppm several minutes after launch to about 1 to 2 ppm at 100 minutes. Maximum Cl2 concentrations were about 40 to 55 ppb and by 20 minutes were less than 1.0 ppb. A tabulated listing of the airborne data is given in the appendix. Usable cloud imaging data were limited to the first 16 minutes after launch.

Woods, D. C.↗

Parametric performance of a turbojet engine combustor using jet A and A diesel fuel

The performance of a single-can JT8D combustor was evaluated with Jet A and a high-aromatic diesel fuel over a parametric range of combustor-inlet conditions. Performance parameters investigated were combustion efficiency, emissions of CO, unburned hydrocarbons, and NOx, as well as liner temperatures and smoke. At all conditions the use of diesel fuel instead of Jet A resulted in increases in smoke numbers and liner temperatures; gaseous emissions, on the other hand, did not differ significantly between the two fuels.

Butze, H. F.↗

Premix fuels study applicable to duct burner conditions for a variable cycle engine

Emission levels and performance of a premixing Jet-A/air duct burner were measured at reference conditions representative of take-off and cruise for a variable cycle engine. In a parametric variation sequence of tests, data were obtained at inlet temperatures of 400, 500 and 600K at equivalence ratios varying from 0.9 to the lean stability limit. Ignition was achieved at all the reference conditions although the CO levels were very high. Significant nonuniformity across the combustor was observed for the emissions at the take-off condition. At a reference Mach number of 0.117 and an inlet temperature of 600K, corresponding to a simulated cruise condition, the NOx emission level was approximately 1 gm/kg-fuel.

Venkataramani, K. S.↗

Lean stability augmentation study

An analytical conceptual design study and an experimental test program were conducted to investigate techniques and develop technology for improving the lean combustion limits of premixing, prevaporizing combustors applicable to gas turbine engine main burners. The use of hot gas pilots, catalyzed flameholder elements, and heat recirculation to augment lean stability limits was considered in the conceptual design study. Tests of flameholders embodying selected concepts were conducted at a pressure of 10 arm and over a range of entrance temperatures simulating conditions to be encountered during stratospheric cruise. The tests were performed using an axisymmetric flametube test rig having a nominal diameter of 10.2 cm. A total of sixteen test configurations were examined in which lean blowout limits, pollutant emission characteristics, and combustor performance were evaluated. The use of a piloted perforated plate flameholder employing a pilot fuel flow rate equivalent to 4 percent of the total fuel flow at a simulated cruise condition resulted in a lean blowout equivalence ratio of less than 0.25 with a design point (T sub zero = 600k, Phi = 0.6) NOx emission index of less than 1.0 g/kg.

Mcvey, J. B.↗

Effect of fuel/air nonuniformity on nitric oxide emissions

A flame tube combustor holding jet A fuel was used in experiments performed at a pressure of .3 Mpa and a reference velocity of 25 meters/second for three inlet air temperatures of 600, 700, and 800 K. The gas sample measurements were taken at locations 18 cm and 48 cm downstream of the perforated plate flameholder. Nonuniform fuel/air profiles were produced using a fuel injector by separately fueling the inner five fuel tubes and the outer ring of twelve fuel tubes. Six fuel/air profiles were produced for nominal overall equivalence ratios of .5 and .6. An example of three of three of these profiles and their resultant nitric oxide NOx emissions are presented. The uniform fuel/air profile cases produced uniform and relatively low profile levels. When the profiles were either center-peaked or edge-peaked, the overall mass-weighted nitric oxide levels increased.

Lyons, V. J.↗