Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Outgassing Measurements for Three Materials, Combined with Vacuum Ultraviolet Radiation Illumination of the Volatile Condensable Materials

The photolysis of three organic materials, by vacuum ultraviolet (VUV) radiation, has been quantified using 15-MHz temperature-controlled quartz microbalances (TQCM's). The rate at which molecular species, released from the individual samples, condensed on two TQCM s was measured for periods of up to 139.9-hours. The individual samples were heated in an effusion cell and the emitted molecular species collected on a pair of TQCM's which were maintained at -40 degrees Celsius. At several points during the deposition measurement, the deposition surface of one TQCM was illuminated by a 30 Watt deuterium lamp, and the loss of material from that surface was observed. V W illumination of the TQCM, concurrent with condensation, reduced the rate that material was lost from the deposition surface. These measurements present a contrasting picture of molecular deposition, in the presence of VUV, to that presented by other investigators who observed an enhanced rate of molecular deposition, when the deposition surface was illuminated by VUV.

Albyn, Keith↗
NASA NTRS2011

Phase change material for temperature control and material storage

A phase change material comprising a mixture of water and deuterium oxide is described, wherein the mole fraction of deuterium oxide is selected so that the mixture has a selected phase change temperature within a range between 0.degree. C. and 4.degree. C. The mixture is placed in a container and used for passive storage and transport of biomaterials and other temperature sensitive materials. Gels, nucleating agents, freezing point depression materials and colorants may be added to enhance the characteristics of the mixture.

Wessling, Jr., Francis C.↗
NASA NTRS2011

Space Systems - Safety and Compatibility of Materials - Method to Determine the Ignition Susceptibility of Materials or Components to Particle Impact

The scope of this International Technical Specification is to provide a method to determine the ignition susceptibility of materials and components to particle impact. The method can be used to determine the conditions at which ignition and consumption of a specimen material occurs when impacted by single or multiple particles entrained in a flow of gaseous oxygen (GOX). Alternatively, the method can be used to determine if a specific material or component is subject to ignition and sustained combustion in a given flow environment when impacted by single or multiple particles entrained in a flow of GOX.

Hirsch, David B.↗
NASA NTRS2013

Analysis of International Space Station Vehicle Materials Exposed on Materials International Space Station Experiment from 2001 to 2011

Since August 2001, the Materials on International Space Station Experiment (MISSE) has provided data on a variety of materials and spacecraft components, including samples chosen to provide sustaining engineering and life extension data for the International Space Station vehicle itself. This Technical Publication is by no means a complete set of MISSE data but does provide changes in solar absorptance, infrared emittance, and visual appearance due to atomic oxygen, ultraviolet radiation, and thermal cycling in vacuum. Conversion coatings, anodizes, thermal control coatings with organic and inorganic binders, multilayer insulation components, optical materials, and part markings are discussed.

Finckenor, M. M.↗
NASA NTRS2018

Computational Materials Techniques for Thermal Protection Solutions: Materials and Process Design

Integrated computational materials techniques that span the atomistic and continuum scales have the potential to aid the design and manufacturing of thermal protection materials. Two cases demonstrating the practical application of these methods are discussed. Case one examines the selection of a high temperature coating for carbon/carbon, with the target application being a solar thermal propulsion heat exchanger. The performance of various refractory metal and metal-carbide coatings is characterized considering extreme thermal (3500 K) and chemical (hydrogen flows) conditions. The recession rate, hydrogen leakage, and likelihood of mechanical failure are characterized and provide directions for further experimental investigation. Case two examines the process optimization of a heat shield material composed of a woven silica fiber preform and cyanate ester resin. Frequently, internal voids were found to be present in this composite after the resin infusion and curing stages of manufacturing. Using the manufacturing conditions, computations indicate that both water adsorption and resin cure shrinkage are contributing factors to void formation. The results suggest an alternative process configuration for curing that would mitigate voids.

Haskins, Justin↗
DOE OSTI2021

Synthesis of N-type thermoelectric materials, including Mg--Sn--Ge materials, and methods for fabrication thereof

Discussed herein are systems and methods for fabrication of MgSnGe-based thermoelectric materials for applications from room temperature and near room temperature to high temperature applications. The TE materials may be fabricated by hand or ball milling a powder to a predetermined particle size and hot-pressing the milled powder to form a thermoelectric component with desired properties including a figure of merit (ZT) over a temperature range. The TE materials fabricated may be disposed in thermoelectric devices for varying applications.

Ren, Zhifeng↗
DOE OSTI2016

Thinking Like a Chemist: Intuition in Thermoelectric Materials

Abstract The coupled transport properties required to create an efficient thermoelectric material necessitates a thorough understanding of the relationship between the chemistry and physics in a solid. We approach thermoelectric material design using the chemical intuition provided by molecular orbital diagrams, tight binding theory, and a classic understanding of bond strength. Concepts such as electronegativity, band width, orbital overlap, bond energy, and bond length are used to explain trends in electronic properties such as the magnitude and temperature dependence of band gap, carrier effective mass, and band degeneracy and convergence. The lattice thermal conductivity is discussed in relation to the crystal structure and bond strength, with emphasis on the importance of bond length. We provide an overview of how symmetry and bonding strength affect electron and phonon transport in solids, and how altering these properties may be used in strategies to improve thermoelectric performance.

Zeier, Wolfgang G.↗
DOE OSTI2015

In-situ tube burst testing and high-temperature deformation behavior of candidate materials for accident tolerant fuel cladding

The high resistance of cladding to plastic deformation and burst failure is one of the most essential properties of accident tolerant fuel (ATF) for maintaining structural integrity during a loss-of-coolant accident (LOCA) since the deformation and burst behavior governs the cooling efficiency of flow channels and process of fission product release. To simulate and evaluate such deformation and burst process of thin-walled cladding, an in-situ testing and evaluation method has been developed on the basis of visual imaging and image analysis techniques. The method uses a specialized optics system consisted of a high-resolution video camera, light filtering unit, and monochromatic light sources, and the in-situ testing is performed using a 50 mm long pressurized thin-walled tubular specimen set in a programmable furnace. In this study eleven (11) candidate cladding materials for ATF, i.e., 6 FeCrAl alloys and 5 nanostructured steels, were tested using the newly developed method, and the time-dependent images were analyzed to produce detailed deformation and burst data such as true hoop stress, strain (creep) rate, and failure stress. Relatively soft FeCrAl alloys deformed and burst below 800°C while negligible strain rates were measured for higher strength alloys and/or for relatively thick wall specimens.

Gussev, Maxim N.↗
DOE OSTI2018

Anisotropic magnetic properties of the triangular plane lattice material TmMgGaO4

Highlights: • TmMgGaO{sub 4} crystallizes in the R-3m space group with the YbFe{sub 2}O{sub 4} structure. • TmMgGaO{sub 4} exhibits geometric magnetic frustration with no ordering down to 1.8 K. • Magnetic properties of TmMgGaO{sub 4} are highly anisotropic. - Abstract: The crystal growth, structure, and basic magnetic properties of TmMgGaO{sub 4} are reported. The Tm ions are located in a planar triangular lattice consisting of distorted TmO{sub 6} octahedra, while the Mg and Ga atoms randomly occupy intermediary bilayers of M-O triangular bipyramids. The Tm ions are positionally disordered. The material displays an antiferromagnetic Curie Weiss theta of ∼−20 −25 K, with no clear ordering visible in the magnetic susceptibility down to 1.8 K; the structure and magnetic properties suggest that ordering of the magnetic moments is frustrated by both structural disorder and the triangular magnetic motif. Single crystal magnetization measurements indicate that the magnetic properties are highly anisotropic, with large moments measured perpendicular to the triangular planes. At 2 K, a broad step-like feature is seen in the field-dependent magnetization perpendicular to the plane on applied field near 2 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Bridging the Void: Halogen Bonding and Aromatic Interactions to Program Luminescence and Electronic Properties of π -Conjugated Materials in the Solid State

π-Conjugated materials are promising candidates for emerging organic optoelectronic devices empowered by molecular design. The unsolved challenges of predicting and controlling their packing as solids, central to their properties and performance, currently limits their practical application. As noncovalent interactions drive packing, control over such interactions are critical to bridging from chemical structure to functional properties. In molecular crystals, halogen bonding and interactions of aromatic rings have emerged as versatile tools for noncovalent control with tailored luminescence and electronic properties. Here, we describe how the interplay of these directional and tunable interactions can engineer properties, including stimuli-responsive behavior. Specifically, halogen bonding can provide robust designs for directing 2D molecular assembly, whereas the intentional interactions of aromatic rings can yield metastable, switchable packing modes, as well as programmed stacking between layers of chromophores. Examples, herein, demonstrate clear relationships between assembly by design and resulting solid-state properties, and strategies presented offer guidance for future designs of π-conjugated molecular materials using specific aromatic interactions and halogen bonding.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Polynitrogen High Energy Density Materials Synthesized by Nonequilibrium Plasma

Metal pentazolate compounds that contain 5-nitrogen singly charged anion rings are an interesting class of materials from a thermodynamics perspective. These compounds are believed to be equilibrium phases only at extremely high pressures, and thus, they constitute exotic states of matter at ambient pressure and temperature. Moreover, the energy released by these pentazolate compounds upon relaxation to the equilibrium state at ambient conditions is in the range 1 to 10 MJ per kg, rivaling that of combustion reactions. The synthesis of pentazolates is not an easy task, and there are only two known methods, each of which has significant challenges. Here, the development of new scalable synthesis routes could enable the production of these exotic materials in sufficient quantity to explore their properties more widely beyond the context of explosives and propellants. In this Perspective, it is argued that nonequilibrium plasma is a promising reaction medium for the synthesis of metal pentazolate compounds, for example from the corresponding metal azide and N 2 gas activated by the discharge at low background temperature.

Chemical reactions↗
DOE OSTI2020

Design, Synthesis, and Characterization of Polymer Precursors to Li x PON and Li x SiPON Glasses: Materials That Enable All-Solid-State Batteries (ASBs)

LiPON-like glasses that form lithium dendrite impenetrable interfaces between lithium battery components are enabling materials that may replace liquid electrolytes permitting production of all-solid-state batteries (ASBs). Unfortunately, to date, such materials are introduced only via gas-phase deposition. Furthermore, we demonstrate the design and synthesis of easily scaled, lowtemperature, low-cost, solution-processable inorganic polymers containing LiPON/LiSiPON elements. OPCl 3 and hexachlorophosphazene [Cl 2 P=N] 3 provide starting points for elaboration using MNH 2 (M = Li/Na) or (Me 3 Si)NH followed by reaction with controlled amounts of LiNH 2 to produce oligomers/polymers with molecular weights (MWs) ≈1–2 kDa characterized by multinuclear NMR, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and matrix-assisted laser desorption/ ionization (MALDI)-time-of-flight (ToF) offering stabilities to 150–200 °C and ceramic yields (800 °C) of 50–60%. 7 Li NMR suggests that precursor-bound Li + dissociates easily, beneficial for electrochemical applications. XPS shows higher N/P ratios (1–3) than via gas-phase methods (<1) correlating N/P ratios, 7 Li shifts, and Li + conductivities. Li 2 SiPHN offers the highest ambient conductivity of 3 × 10 –1 mS cm –1 at 400 °C/2 h/N 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2018

Nucleation of dislocations and their dynamics in layered oxide cathode materials during battery charging

Lithium-rich layered oxides (LRLO) are among the leading candidates for the next-generation cathode material for energy storage, delivering 50% excess capacity over commercially used compounds. Despite excellent prospects, voltage fade has prevented effective use of the excess capacity, and a major challenge has been a lack of understanding of the mechanisms underpinning the voltage fade. Here, using operando three-dimensional Bragg coherent diffractive imaging, we directly observe the nucleation of a mobile dislocation network in LRLO nanoparticles. The dislocations form more readily in LRLO as compared with a classical layered oxide, suggesting a link between the defects and voltage fade. We show microscopically how the formation of partial dislocations contributes to the voltage fade. The insights allow us to design and demonstrate an effective method to recover the original high-voltage functionality. Furthermore, our findings reveal that the voltage fade in LRLO is reversible and call for new paradigms for improved design of oxygen-redox active materials.

25 ENERGY STORAGE↗
DOE OSTI2018

Liquid crystal self-assembly of upconversion nanorods enriched by depletion forces for mesostructured material preparation

Monodisperse rod-like colloidal particles are known for spontaneously forming both nematic and smectic liquid crystal phases, but their self-assembly was typically exploited from the fundamental soft condensed matter physics perspective. Here we demonstrate that depletion interactions, driven by non-adsorbing polymers like dextran and surfactants, can be used to enrich the self-organization of photon-upconversion nanorods into orientationally ordered nematic and smectic-like membrane colloidal superstructures. We study thermodynamic phase diagrams and demonstrate polarization-dependent photon upconversion exhibited by the ensuing composites, which arises from the superposition of unique properties of the solid nanostructures and the long-range ordering enabled by liquid crystalline self-organization. Finally, we discuss how our method of utilizing self-assembly due to the steric and electrostatic interactions, along with attractive depletion forces, can enable technological uses of lyotropic colloidal liquid crystals and mesostructured composite materials enabled by them, even when they are formed by anisotropic nanoparticles with relatively small aspect ratios.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Charging toward improved lithium-ion polymer electrolytes: exploiting synergistic experimental and computational approaches to facilitate materials design

Ion-conducting polymer electrolytes are attractive materials for all-solid-state lithium-ion batteries (LiBs) as a result of their potential to improve performance, mitigate safety concerns, and facilitate efficient device processing. Understanding how lithium-ionic transport is influenced by the macromolecular features, such as dielectric strength, solvation site connectivity, monomer segment relaxation timescales, segregation strength, and mesophase composition, is crucial for advancing ion-conducting materials. The integration of experimental and computational efforts can provide comprehensive links between chemical and structural characteristics (e.g., ion solvation, chain mobility, morphology) and macroscopic performance properties, accelerating the adoption of next-generation polymer electrolytes. Furthermore, this perspective highlights several synergistic experimental–computational approaches that have provided unique insights into local ion and polymer interactions, chain dynamics, and thermodynamics to promote the rational design of new ion-conducting polymers. Additionally, this work concludes with several suggested areas in which methodologies can be augmented, novel properties can be realized, and polymer electrolytes can be integrated to generate more robust LiB systems.

25 ENERGY STORAGE↗