Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MHD Instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Interacting tilt and kink instabilities in repelling current channels

We present a numerical study in resistive magnetohydrodynamics (MHD) where the initial equilibrium configuration contains adjacent, oppositely directed, parallel current channels. Since oppositely directed current channels repel, the equilibrium is liable to an ideal magnetohydrodynamic tilt instability. This tilt evolution, previously studied in planar settings, involves two magnetic islands or flux ropes, which on Alfvénic timescales undergo a combined rotation and separation. This in turn leads to the creation of (near) singular current layers, posing severe challenges to numerical approaches. Using our open-source grid-adaptive MPI-AMRVAC software, we revisit the planar evolution case in compressible MHD, as well as its extension to two-and-a-half-dimensional (2.5D) and full three-dimensional (3D) scenarios. As long as the third dimension can be ignored, pure tilt evolutions result that are hardly affected by out of plane magnetic field components. In all 2.5D runs, our simulations do show secondary tearing type disruptions throughout the near singular current sheets in the far nonlinear saturation regime. In full 3D runs, both current channels can be liable to additional ideal kink deformations. We discuss the effects of having both tilt and kink instabilities acting simultaneously in the violent, reconnection-dominated evolution. In 3D, both the tilt and the kink instabilities can be stabilized by tension forces. As a concrete space plasma application, we argue that interacting tilt-kink instabilities in repelling current channels provide a novel route to initiate solar coronal mass ejections, distinctly different from the currently favored pure kink or torus instability routes.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetorotational instability in a swirling partially ionized gas

ABSTRACT The magnetorotational instability (MRI) has been proposed as the method of angular momentum transport that enables accretion in astrophysical discs. However, for weakly ionized discs, such as protoplanetary discs, it remains unclear whether the combined non-ideal magnetohydrodynamic (MHD) effects of Ohmic resistivity, ambipolar diffusion, and the Hall effect make these discs MRI stable. While much effort has been made to simulate non-ideal MHD MRI, these simulations make simplifying assumptions and are not always in agreement with each other. Furthermore, it is difficult to directly observe the MRI astrophysically because it occurs on small scales. Here, we propose the concept of a swirling gas experiment of weakly ionized argon gas between two concentric cylinders threaded with an axial magnetic field that can be used to study non-ideal MHD MRI. For our proposed experiment, we derive the hydrodynamic equilibrium flow and a dispersion relation for MRI that includes the three non-ideal effects. We solve this dispersion relation numerically for the parameters of our proposed experiment. We find it should be possible to produce a non-ideal MRI in such an experiment because of the Hall effect, which increases the MRI growth rate when the vertical magnetic field is anti-aligned with the rotation axis. As a proof of concept, we also present experimental results for a hydrodynamic flow in an unmagnetized prototype. We find that our prototype has a small, but non-negligible, α-parameter that could serve as a baseline for comparison to our proposed magnetized experiment, which could be subject to additional turbulence from the MRI.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stability of compressible reduced magnetohydrodynamic equilibria-Analogy with magnetorotational instability

Stability analyses for equilibria of the compressible reduced magnetohydrodynamics (CRMHD) model are carried out by means of the Energy-Casimir (EC) method. Stability results are compared with those obtained for ideal magnetohydrodynamics (MHD) from the classical {delta}W criterion. An identification of the terms in the second variation of the free energy functional for CRMHD with those of {delta}W is made: two destabilizing effects present for CRMHD turn out to correspond to the kink and interchange instabilities in usual MHD, while the stabilizing roles of field line bending and compressibility are also identified in the reduced model. Also, using the EC method, stability conditions in the presence of toroidal flow are obtained. A formal analogy between CRMHD and a reduced incompressible model for magnetized rotating disks, due to Julien and Knobloch [EAS Pub. Series, 21, 81 (2006)], is discovered. In light of this analogy, energy stability analysis shows that the condition for magnetorotational instability (MRI) for the latter model corresponds to the condition for interchange instability in CRMHD, with the Coriolis term and shear velocity playing the roles of the curvature term and pressure gradient, respectively. Using the EC method, stability conditions for the rotating disk model, for a large class of equilibria with possible non-uniform magnetic fields, are obtained. In particular, this shows it is possible for the MRI system to undergo, in addition to the MRI, another instability that is analogous to the kink instability. For vanishing magnetic field, the Rayleigh hydrodynamical stability condition is recovered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of 3D Structure on Magnetic Reconnection

Results from 2.5D and 3D studies of the onset and development of the tearing instability are presented, using high fidelity resistive MHD simulations. A limited parameter study of the strength of the reconnecting field (or shear angle) was performed. An initially simple 1D equilibrium was used, consisting of a modified force-free current sheet, with periodic boundary conditions in all directions. In all cases, the linear and nonlinear evolution led to a primary current sheet between two large flux ropes. The global reconnection rate during this later stage was analyzed in all simulations. It was found that in 2.5D the primary current sheet fragmented owing to plasmoids, and as expected, the global reconnection rate, calculated using multiple methods, increases with the strength of the reconnecting field owing to a stronger Alfvén speed. In 3D, the presence of interacting oblique modes of the tearing instability complicates the simple 2.5D picture, entangling the magnetic field of the inflow and introducing a negative effect on the reconnection rate. The two competing effects of stronger Alfvén speed and entangling, which both increase with the strength of the reconnecting field, resulted in a decrease in the reconnection rate with increasing reconnecting field. For all simulations, the 3D rates were less than in 2.5D but suggest that as one goes to weak reconnecting field (or strong guide field) the system becomes more 2.5D-like and the 2.5D and 3D rates converge. These results have relevance to situations like nanoflare heating and flare current sheets in the corona.

Lars K S Daldorff↗

TURBULENT STRESSES IN LOCAL SIMULATIONS OF RADIATION-DOMINATED ACCRETION DISKS, AND THE POSSIBILITY OF THE LIGHTMAN-EARDLEY INSTABILITY

We present the results of a series of radiation MHD simulations of a local patch of an accretion disk, with a fixed vertical gravity profile but with different surface mass densities and a broad range of radiation to gas pressure ratios. Each simulation achieves a thermal equilibrium that lasts for many cooling times. After averaging over times that are long compared to a cooling time, we find that the vertically integrated stress is approximately proportional to the vertically averaged total thermal (gas plus radiation) pressure. We map out-for the first time on the basis of explicit physics-the thermal equilibrium relation between stress and surface density: the stress decreases (increases) with increasing surface mass density when the simulation is radiation (gas) pressure dominated. The dependence of stress on surface mass density in the radiation pressure dominated regime suggests the possibility of a Lightman-Eardley inflow instability, but global simulations or shearing box simulations with much wider radial boxes will be necessary to confirm this and determine its nonlinear behavior.

79 ASTRONOMY AND ASTROPHYSICS↗

The nonlinear breakup of the sun's toroidal field

There are good reasons for believing that the sun has a strong toroidal magnetic field in the stably stratified region of convective overshoot sandwiched between the radiative zone and convective zone proper. The magnetic field in this region is modeled by studying the behavior of a layer of uniform field embedded in a subadiabatic atmosphere. Since the field can support extra mass, such a configuration is top-heavy, and instabilities of the Rayleigh-Taylor type can occur. Numerical integration of the two-dimensional compressible MHD equations makes it possible to follow the evolution of this instability into the nonlinear regime. The initial buoyancy-driven instability of the magnetic field gives rise to strong shearing motions, thereby exciting secondary Kelvin-Helmholtz instabilities which wrap the gas into regions of intense vorticity. The somewhat surprising subsequent motions are determined primarily by the strong interactions between vortices.

Hughes, D. W.↗

Blob Formation and Ejection in Coronal Jets due to the Plasmoid and Kelvin–Helmholtz Instabilities

We perform 2D resistive magnetohydrodynamic simulations of coronal jets driven by flux emergence along the lower boundary. The reconnection layers are susceptible to the formation of blobs that are ejected in the jet. Our simulation with low plasma β (Case I) shows that magnetic islands form easily and propagate upward in the jet. These islands are multithermal and thus are predicted to show up in hot channels (335 Å and 211 Å) and the cool channel (304 Å) in observations by the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory . The islands have maximum temperatures of 8 MK, lifetimes of 120 s, diameters of 6 Mm, and velocities of 200 km s{sup −1}. These parameters are similar to the properties of blobs observed in extreme-ultraviolet (EUV) jets by AIA. The Kelvin–Helmholtz instability develops in our simulation with moderately high plasma β (Case II) and leads to the formation of bright vortex-like blobs above the multiple high magnetosonic Mach number regions that appear along the jet. These vortex-like blobs can also be identified in the AIA channels. However, they eventually move downward and disappear after the high magnetosonic Mach number regions disappear. In the lower plasma β case, the lifetime for the jet is shorter, the jet and magnetic islands are formed with higher velocities and temperatures, the current-sheet fragments are more chaotic, and more magnetic islands are generated. Our results show that the plasmoid instability and Kelvin–Helmholtz instability along the jet are both possible causes of the formation of blobs observed at EUV wavelengths.

79 ASTRONOMY AND ASTROPHYSICS↗

PLANETESIMAL FORMATION AT THE BOUNDARY BETWEEN STEADY SUPER/SUB-KEPLERIAN FLOW CREATED BY INHOMOGENEOUS GROWTH OF MAGNETOROTATIONAL INSTABILITY

We have studied formation of planetesimals at a radial pressure bump in a protoplanetary disk created by radially inhomogeneous magnetorotational instability (MRI), through three-dimensional resistive MHD simulations including dust particles. In our previous papers, we showed that the inhomogeneous MRI developing in non-uniform structure of magnetic field or magnetic resistivity can transform the local gas flow in the disk to a quasi-steady state with local rigid rotation that is no longer unstable against the MRI. Since the outer part of the rigid rotation is super-Keplerian flow, a quasi-static pressure bump is created and dust concentration is expected there. In this paper, we perform simulations of the same systems, adding dust particles that suffer gas drag and modulate gas flow via the back-reaction of the gas drag (dust drag). We use {approx}O(10{sup 7}) super-particles, each of which represents {approx}O(10{sup 6})-O(10{sup 7}) dust particles with sizes of centimeter to meter. We have found that the dust drag suppresses turbulent motion to decrease the velocity dispersion of the dust particles while it broadens the dust concentrated regions to limit peaky dust concentration, compared with the simulation without the dust drag. We found that the positive effect for the gravitational instability (GI), reduction in the velocity dispersion, dominates over the negative one, suppression in particle concentration. For meter-size particles with the friction time {tau}{sub f} {approx_equal} 1/{Omega}, where {Omega} is Keplerian frequency, the GI of the dust particles that may lead to planetesimal formation is expected. For such a situation, we further introduced the self-gravity of dust particles to the simulation to demonstrate that several gravitationally bound clumps are actually formed. Through analytical arguments, we found that planetesimal formation from meter-sized dust particles is possible at {approx}5 AU, if dust spatial density is a few times larger than that in the minimum mass solar nebula.

79 ASTRONOMY AND ASTROPHYSICS↗

Assessing the performance of MagLIF with 3D MHD simulations

The Magnetized Liner Inertial Fusion (MagLIF) experimental platform at Sandia National Laboratories has realized a number of recent improvements in electrical current and laser preheat coupling but fusion yields are below expectations, based on modeling with clean (that is, simulations with no interfacial instabilities and no mix) two-dimensional (2D) magneto-hydrodynamics (MHD) simulations, by a factor of 5 or more. However, magnetized liner implosions are known to produce helical magneto-Rayleigh–Taylor (MRT) modes and complex stagnation structures that cannot be directly modeled in 2D. This paper presents the results of 3D HYDRA MHD simulations, including helical MRT, showing that degradation from these instabilities can readily reproduce experimental yields, but it is difficult to simultaneously match the yield along with inferred fuel temperature, pressure, and burn history (assessed with x-rays), which are larger in the experiments considered here. Additional analysis methods and future experiments are proposed to help address the discrepancies. The 3D simulations also show, without substantive improvements to stability, changing the applied Bz or preheat is unlikely to increase performance of MagLIF to the same degree as clean 2D simulations. Finally, the first 3D HYDRA simulations with the Hall term show the ab initio production of helical MRT and produce a clear change in stagnation morphology compared to pre-seeded simulations without Hall. In spite of the differences, the simulations still produce comparable fusion performance but with longer, lower power, neutron yield history.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional plasmoid-mediated reconnection and turbulence in Hall magnetohydrodynamics

Plasmoid instability accelerates reconnection in collisional plasmas by transforming a laminar reconnection layer into numerous plasmoids connected by secondary current sheets in two dimensions (2D) and by fostering self-generated turbulent reconnection in three dimensions (3D). In large-scale astrophysical and space systems, plasmoid instability likely initiates in the collisional regime but may transition into the collisionless regime as the fragmentation of the current sheet progresses toward kinetic scales. Hall magnetohydrodynamics (MHD) models are widely regarded as a simplified yet effective representation of the transition from collisional to collisionless reconnection. However, plasmoid instability in 2D Hall MHD simulations often leads to a single-X-line reconnection configuration, which significantly differs from fully kinetic particle-in-cell simulation results. This study shows that single-X-line reconnection is less likely to occur in 3D compared to 2D. Moreover, depending on the Lundquist number and the ratio between the system size and the kinetic scale, Hall MHD can also realize 3D self-generated turbulent reconnection. We analyze the features of the self-generated turbulent state, including the energy power spectra and the scale dependence of turbulent eddy anisotropy.

Physics↗

GLOBAL SIMULATIONS OF ACCRETION DISKS. I. CONVERGENCE AND COMPARISONS WITH LOCAL MODELS

Grid-based magnetohydrodynamic (MHD) simulations have proven invaluable for the study of astrophysical accretion disks. However, the fact that angular momentum transport in disks is mediated by MHD turbulence (with structure down to very small scales) raises the concern that the properties of the modeled accretion disks are affected by the finite numerical resolution of the simulation. By implementing an orbital advection algorithm into the Athena code in cylindrical geometry, we have performed a set of global (but unstratified) Newtonian disk simulations extending up to resolutions previously unattained. We study the convergence of these models as a function of spatial resolution and initial magnetic field geometry. The usual viscosity parameter ({alpha}) or the ratio of thermal-to-magnetic pressure ({beta}) is found to be a poor diagnostic of convergence, whereas the average tilt angle of the magnetic field in the (r, {phi})-plane is a very good diagnostic of convergence. We suggest that this is related to the saturation of the MHD turbulence via parasitic modes of the magnetorotational instability. Even in the case of zero-net magnetic flux, we conclude that our highest resolution simulations (with 32 zones and 64 zones per vertical scale height) have achieved convergence. Our global simulations reach resolutions comparable to those used in local, shearing-box models of MHD disk turbulence. We find that the saturation predictors derived from local simulations correspond well to the instantaneous correlations between local flux and stress found in our global simulations. However, the conservation of magnetic flux implicit in local models is not realized in our global disks. Thus, the magnetic connectivity of an accretion disk represents physics that is truly global and cannot be captured in any ab initio local model.

79 ASTRONOMY AND ASTROPHYSICS↗

Convective plasma stability consistent with MHD equilibrium in magnetic confinement systems with a decreasing field

A study is made of the convective (interchange, or flute) plasma stability consistent with equilibrium in magnetic confinement systems with a magnetic field decreasing outward and large curvature of magnetic field lines. Algorithms are developed which calculate convective plasma stability from the Kruskal-Oberman kinetic criterion and in which the convective stability is iteratively consistent with MHD equilibrium for a given pressure and a given type of anisotropy in actual magnetic geometry. Vacuum and equilibrium convectively stable configurations in systems with a decreasing, highly curved magnetic field are calculated. It is shown that, in convectively stable equilibrium, the possibility of achieving high plasma pressures in the central region is restricted either by the expansion of the separatrix (when there are large regions of a weak magnetic field) or by the filamentation of the gradient plasma current (when there are small regions of a weak magnetic field, in which case the pressure drops mainly near the separatrix). It is found that, from the standpoint of equilibrium and of the onset of nonpotential ballooning modes, a kinetic description of convective stability yields better plasma confinement parameters in systems with a decreasing, highly curved magnetic field than a simpler MHD model and makes it possible to substantially improve the confinement parameters for a given type of anisotropy. For the Magnetor experimental compact device, the maximum central pressure consistent with equilibrium and stability is calculated to be as high as {beta} {approx} 30%. It is shown that, for the anisotropy of the distribution function that is typical of a background ECR plasma, the limiting pressure gradient is about two times steeper than that for an isotropic plasma. From a practical point of view, the possibility is demonstrated of achieving better confinement parameters of a hot collisionless plasma in systems with a decreasing, highly curved magnetic field than those obtained with the simplest MHD description.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stabilization of numerical interchange in spectral-element magnetohydrodynamics

In this study, auxiliary numerical projections of the divergence of flow velocity and vorticity parallel to magnetic field are developed and tested for the purpose of suppressing unphysical interchange instability in magnetohydrodynamic simulations. The numerical instability arises with equal-order C 0 finite- and spectral-element expansions of the flow velocity, magnetic field, and pressure and is sensitive to behavior at the limit of resolution. The auxiliary projections are motivated by physical field-line bending, and coercive responses to the projections are added to the flow-velocity equation. Their incomplete expansions are limited to the highest-order orthogonal polynomial in at least one coordinate of the spectral elements. Cylindrical eigenmode computations show that the projections induce convergence from the stable side with first-order ideal-MHD equations during h-refinement and p-refinement. Hyperbolic and parabolic projections and responses are compared, together with different methods for avoiding magnetic divergence error. Lastly, the projections are also shown to be effective in linear and nonlinear time-dependent computations with the NIMROD code [C. R. Sovinec, et al., J. Comput. Phys. 195 (2004) 355-386], provided that the projections introduce numerical dissipation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Alternative optical concept for electron cyclotron emission imaging

The implementation of advanced electron cyclotron emission imaging (ECEI) systems on tokamak experiments has revolutionized the diagnosis of magnetohydrodynamic (MHD) activities and improved our understanding of instabilities, which lead to disruptions. It is therefore desirable to have an ECEI system on the ITER tokamak. However, the large size of optical components in presently used ECEI systems have, up to now, precluded the implementation of an ECEI system on ITER. This paper describes a new optical ECEI concept that employs a single spherical mirror as the only optical component and exploits the astigmatism of such a mirror to produce an image with one-dimensional spatial resolution on the detector. Since this alternative approach would only require a thin slit as the viewing port to the plasma, it would make the implementation of an ECEI system on ITER feasible. The results obtained from proof-of-principle experiments with a 125 GHz microwave system are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

IRON OPACITY BUMP CHANGES THE STABILITY AND STRUCTURE OF ACCRETION DISKS IN ACTIVE GALACTIC NUCLEI

Accretion disks around supermassive black holes have regions where the Rosseland mean opacity can be larger than the electron scattering opacity due to the large number of bound–bound transitions in iron. We study the effects of this iron opacity “bump” on the thermal stability and vertical structure of radiation-pressure-dominated accretion disks, utilizing three-dimensional radiation magnetohydrodynamic (MHD) simulations in the local shearing box approximation. The simulations self-consistently calculate the heating due to MHD turbulence caused by magneto-rotational instability and radiative cooling by using the radiative transfer module based on a variable Eddington tensor in Athena. For a 5 × 10{sup 8} solar mass black hole with ∼3% of the Eddington luminosity, a model including the iron opacity bump maintains its structure for more than 10 thermal times without showing significant signs of thermal runaway. In contrast, if only electron scattering and free–free opacity are included as in the standard thin disk model, the disk collapses on the thermal timescale. The difference is caused by a combination of (1) an anti-correlation between the total optical depth and the midplane pressure, and (2) enhanced vertical advective energy transport. These results suggest that the iron opacity bump may have a strong impact on the stability and structure of active galactic nucleus (AGN) accretion disks, and may contribute to a dependence of AGN properties on metallicity. Since this opacity is relevant primarily in UV emitting regions of the flow, it may help to explain discrepancies between observation and theory that are unique to AGNs.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetic field fluctuations in the Venus magnetosheath

Using a model for the convection pattern of the shocked solar wind flow around the Venus obstacle, Pioneer Venus observations of ultra-low-frequency (about 10-40 s period) magnetic field fluctuations in the magnetosheath have been traced along streamlines to the regions of the quasi-parallel bow shock. The periods and polarizations of the sinusoidal fluctuations are similar to those observed upstream of the quasi-parallel bow shock, where streaming superthermal particles are believed to produce MHD waves by a beam-plasma instability. The results suggest that both disturbances at the ionopause at Venus and the earth's magnetopause may be caused by convection of turbulent magnetic fields from the subsolar bow shock when the interplanetary field direction produces a quasi-parallel shock there.

Luhmann, J. G.↗

Effect of a localized minimum in equatorial field strength on resistive tearing instability in the geomagnetotail

A two-dimensional, resistive-MHD computer code is used to investigate the spontaneous reconnection of magnetotaillike configurations. The initial conditions adopted in the simulations are of two types: (1) in which the equatorial normal magnetic field component B(ze) declines monotonically down the tail, and (2) in which B(ze) exhibits a deep minimum in the near-earth plasma sheet. To represent the case where the earthward convection stops before the X line forms, zero-flow boundary conditions are imposed at the edges of the computational box. The initial configurations are in equilibrium and table within ideal MHD. The dynamic evolution of the system starts after the resistivity is turned on. The main results of these simulations basically support the neutral-line model of substorms and confirm Birn's (1980) computer studies. Spontaneous formation of an X-type neutral point and a single O-type plasmoid with strong tailward flow on the tailward side of the X point is found. The time interval from the turning on of the resistivity to the formation of a plasmoid is much shorter in the case where there is an initial deep minimum. A simple analytic calculation is also carried out to demonstrate why the configuration with a deep minimum is more susceptible to the development of the neutral point.

Hau, L.-N.↗

Magnetohydrodynamic modeling of the solar corona

The ideal and resistive magnetohydrodynamic (MHD) model is used to examine the dynamics and structure of the solar corona. When the coronal magnetic field is deformed by photospheric flow it can evolve to states that become unstable to ideal MHD modes. The nonlinear evolution of these instabilities can lead to the generation of current sheets, field line reconnection, and energy release. The disruption of an arcade field and the kinking of coronal loops is described. The braiding of the large-scale coronal field by convective photospheric motions develops fine-scale structure in the magnetic field and leads to the development of intense current filaments. The resistive dissipation of these currents can provide an efficient coronal heating mechanism.

Mikic, Zoran↗