Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Ti-Nb thin films deposited by magnetron sputtering on stainless steel

Thin films of Ti-Nb alloys were deposited on AISI 316L stainless steel substrate by magnetron sputtering, and the structure, composition, morphology, and microstructure of the films were analyzed by means of x-ray diffraction (XRD), (scanning) transmission electron microscopy (TEM) coupled with energy-dispersive x-ray spectroscopy, atomic force microscopy (AFM), and x-ray photoelectron spectroscopy (XPS). Thin films of four compositions were produced: Ti{sub 85}Nb{sub 15} (Ti-26 wt. % Nb), Ti{sub 80}Nb{sub 20} (Ti-33 wt. % Nb), Ti{sub 70}Nb{sub 30} (Ti-45 wt. % Nb), and Ti{sub 60}Nb{sub 40} (Ti-56 wt. % Nb). Structural characterization by XRD indicated that only the β phase was present in the thin films and that the increase in the Nb content modified the alloy film texture. These changes in the film texture, also detected by TEM analysis, were attributed to different growth modes related to the Nb content in the alloy films. The mean grain sizes measured by AFM increased with the Nb amount (from 197 to 222 nm). XPS analysis showed a predominance of oxidized Ti and Nb on the film surfaces and an enrichment of Ti.

36 MATERIALS SCIENCE↗

Synthesis and characterization of MoB{sub 2−x} thin films grown by nonreactive DC magnetron sputtering

DC magnetron sputtering was used to deposit molybdenum boride thin films for potential low-friction applications. The films exhibit a nanocomposite structure with ∼10 nm large MoB{sub 2−x} (x > 0.4) grains surrounded by a boron-rich tissue phase. The preferred formation of the metastable and substoichiometric hP3-MoB{sub 2} structure (AlB{sub 2}-type) is explained with kinetic constraints to form the thermodynamically stable hR18-MoB{sub 2} phase with a very complex crystal structure. Nanoindentation revealed a relatively high hardness of (29 ± 2) GPa, which is higher than bulk samples. The high hardness can be explained by a hardening effect associated with the nanocomposite microstructure where the surrounding tissue phase restricts dislocation movement. A tribological study confirmed a significant formation of a tribofilm consisting of molybdenum oxide and boron oxide, however, without any lubricating effects at room temperature.

36 MATERIALS SCIENCE↗

Characterizing the composition, structure, and mechanical properties of magnetron sputtering physical vapor deposition TiN and TiSiN coatings

Ti(Si)N coatings were deposited on Si wafers via magnetron sputtering physical vapor deposition technique. Scanning electron microscopy and atomic force microscopy were used to study the morphologies, grain size, and thicknesses of the different films. X-ray diffraction confirmed the formation of the titanium nitride cubic phase. X-ray photoelectron spectroscopy (XPS) was used to study the silicon and oxygen levels in the films, and high resolution XPS was used to determine the surface oxide to nitride ratios as well as the silicon–nitrogen environment. The hardness of these films was then determined with nanoindentation. It was shown that grain size and film density could be controlled by the Si level and the ion bombardment to eliminate the oxygen level in the nitride coatings, which led to the harder films. It was suggested that due to the miscibility of Si, a ternary TiSiN solid solution was formed. Stronger (200) orientation of the TiN B1-NaCl crystals was associated with increased hardness of the coatings. In conclusion, this crystalline structure was preserved after incorporating Si.

36 MATERIALS SCIENCE↗

Impact of high-power impulse magnetron sputtering pulse width on the nucleation, crystallization, microstructure, and ferroelectric properties of hafnium oxide thin films

The impact of the high-power impulse magnetron sputtering (HiPIMS) pulse width on the crystallization, microstructure, and ferroelectric properties of undoped HfO 2 films is investigated. HfO 2 films were sputtered from a hafnium metal target in an Ar/O 2 atmosphere, varying the instantaneous power density by changing the HiPIMS pulse width with fixed time-averaged power and pulse frequency. The pulse width is shown to affect the ion-to-neutral ratio in the depositing species with the shortest pulse durations leading to the highest ion fraction. In situ x-ray diffraction measurements during crystallization demonstrate that the HiPIMS pulse width impacts nucleation and phase formation, with an intermediate pulse width of 110 μ s stabilizing the ferroelectric phase over the widest temperature range. Although the pulse width impacts the grain size with the lowest pulse width resulting in the largest grain size, the grain size does not strongly correlate with the phase content or ferroelectric behavior in these films. In conclusion, these results suggest that precise control over the energetics of the depositing species may be beneficial for forming the ferroelectric phase in this material.

36 MATERIALS SCIENCE↗

Deposition of copper coatings in a magnetron with liquid target

Copper coatings were deposited on monocrystalline Si substrates using a magnetron discharge with a liquid cathode in the metal vapour plasma. During the deposition, the bias voltage in the range from 0 V to–400 V was applied to the substrate. The prepared films were investigated by a scanning electron microscope, and their adhesive properties were studied using a scratch tester. It was demonstrated that the adhesion of the deposited films strongly depends on the bias voltage and varies in a wide range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characteristics of the magnetron discharge plasma at large distances from the cathode

The parameters of the magnetron plasma at distances several times larger than the cathode diameter were measured. The plasma temperature and density measured by the probe technique were found to be 1.4 eV and 6 x 10{sup 10} cm{sup -3}, respectively. The dependences of the plasma density and temperature on the argon flow rate in the course of TiAlN coating deposition were determined. Before deposition of the coating, the substrate was cleaned by ion sputtering at substrate bias voltages higher than 200 V.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonsputtering impulse magnetron discharge

Experiments with quasi-steady high-current discharges in crossed E Multiplication-Sign B fields in various gases (Ar, N{sub 2}, H{sub 2}, and SF{sub 6}) and gas mixtures (Ar/SF{sub 6} and Ar/O{sub 2}) at pressures from 10{sup -3} to 5 Torr in discharge systems with different configurations of electric and magnetic fields revealed a specific type of stable low-voltage discharge that does not transform into an arc. This type of discharge came to be known as a high-current diffuse discharge and, later, a nonsputtering impulse magnetron discharge. This paper presents results from experimental studies of the plasma parameters (the electron temperature, the plasma density, and the temperature of ions and atoms of the plasma-forming gas) of a high-current low-pressure diffuse discharge in crossed E Multiplication-Sign B fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Properties of GaAsN nanowires grown by magnetron-sputtering deposition

The effectiveness of magnetron-sputtering deposition in an Ar-N{sub 2} plasma-forming mixture as a technique for the fabrication of arrays of GaAs{sub 1-x}N{sub x} nanowires (NWs) with typical diameters from 10 to 200 nm and lengths up to 3000 nm is demonstrated. Dependence of the growth character of NW on the parameters of the synthesis process, such as the size of Au droplets, deposition rate, and crystallographic orientation of the surface and the temperature of the substrate, is investigated. Analysis of the dependence of NW height on their diameter demonstrates that growth occurs predominantly by the diffusion mechanism. The nitrogen content is kept stable for growth temperatures in the range 400-500{sup o}C, being as high as 2.7%. For the substrate temperatures in the range 530-600{sup o}C, an abrupt drop in the nitrogen content in the alloy takes place. In the photoluminescence (PL) spectra of the samples obtained, a red shift of the emission band is observed, which is related to an increase in the nitrogen content. The growth-temperature dependence of the position of the luminescence band and the nitrogen content is determined. It is found that the PL intensity of samples with GaAsN NWs containing 2.7% nitrogen increases by a factor of 5-10 as compared to samples with planar layers, which is explained by the absence of structural defects in NWs.

39↗

Comprehensive study of the conditions for obtaining hydrogenated amorphous erbium- and oxygen-doped silicon suboxide films, a-SiO{sub x}:H Left-Pointing-Angle-Bracket Er,O Right-Pointing-Angle-Bracket , by dc-magnetron deposition

The results of a comprehensive study of the conditions for growing a-SiO{sub x}:H Left-Pointing-Angle-Bracket Er,O Right-Pointing-Angle-Bracket films are presented. The effect of the composition of various erbium-containing targets (a-SiO{sub x}:H , ErO{sub x}, Er{sub 2}SiO{sub 5}, Er{sub 2}O{sub 3}, and Er), substrate temperature, and annealing temperatures in argon, air, and under conditions of SiH{sub 4} + Ar + O{sub 2} plasma glow is studied. In order to obtain a-SiO{sub x}:H Left-Pointing-Angle-Bracket Er,O Right-Pointing-Angle-Bracket films with the highest photoluminescence intensity of erbium ions, it is recommended for the following technological conditions to be used: the substrate holder should be insulated from dc-magnetron electrodes and the working gas mixture should include silane, argon, and oxygen. Single-crystal silicon and metal erbium should be used as targets. The erbium target should be placed only in the Si-target erosion zone.

36 MATERIALS SCIENCE↗

Different properties of aluminum doped zinc oxide nanostructured thin films prepared by radio frequency magnetron sputtering

Aluminium doped zinc oxide (AZO) nanostructured thin films are prepared by radio frequency magnetron sputtering on glass substrate using specifically designed ZnO target containing different amount of Al{sub 2}O{sub 3} powder as the Al doping source. The optical properties of the aluminium doped zinc oxide films are investigated. The topography of the deposited films were investigated by Atomic Force Microscopy. Variation of the refractive index by annealing temperature are considered and it is seen that the refractive index increases by increasing the annealing temperature.

36 MATERIALS SCIENCE↗

Optical properties of ITO films obtained by high-frequency magnetron sputtering with accompanying ion treatment

A variation in the properties of indium-tin-oxide (ITO) films obtained by the method of reactive magnetron sputtering with simultaneous ion treatment is reported. The ITO films feature the following parameters in the optical range of 450-1100 nm: a transmission coefficient of 80%, band gap of 3.50-3.60 eV, and a refractive index of 1.97-2.06. All characteristics of the films depend on the ion-treatment current. The latter, during the course of deposition, reduces the resistivity of the ITO films with the smallest value of the resistivity being equal to 2 Multiplication-Sign 10{sup -3} {Omega} cm. The degradation of films with a high resistivity when kept in air is observed.

36 MATERIALS SCIENCE↗

Deposition and characterization of molybdenum thin films using dc-plasma magnetron sputtering

Molebdenum (Mo) thin films were deposited on well-cleaned soda-lime glass substrates using DC-plasma magnetron sputtering. In the design of experiment deposition was optimized for maximum beneficial characteristics by monitoring effect of process variables such as deposition power (100–200 W). Their electrical, structural and morphological properties were analyzed to study the effect of these variables. The electrical resistivity of Mo thin films could be reduced by increasing deposition power. Within the range of analyzed deposition power, Mo thin films showed a mono crystalline nature and the crystallites were found to have an orientation along [110] direction. The surface morphology of thin films showed that a highly dense micro structure has been obtained. The surface roughness of films increased with deposition power. The adhesion of Mo thin films could be improved by increasing the deposition power. Atomic force microscopy was used for the topographical study of the films and to determine the roughness of the films. X-ray diffractrometer and scanning electron microscopy analysis were used to investigate the crystallinity and surface morphology of the films. Hall effect measurement system was used to find resistivity, carrier mobility and carrier density of deposited films. The adhesion test was performed using scotch hatch tape adhesion test. Mo thin films prepared at deposition power of 200 W, substrate temperature of 23°C and Ar pressure of 0.0123 mbar exhibited a mono crystalline structure with an orientation along (110) direction, thickness of ∼550 nm and electrical resistivity value of 0.57 × 10{sup −4} Ω cm.

36 MATERIALS SCIENCE↗

Parameters of ZnO films with p-type conductivity deposited by high-frequency magnetron sputtering

It is demonstrated that a reduction in the defect concentration in ZnO films formed by high-frequency magnetron sputtering allows effective doping with acceptor impurities both in the cation (Li) and anion (N{sup +}) sublattices and p-type conductivity with reproducible charge-carrier parameters (concentration and mobility) to be obtained. ZnO films are doped with nitrogen by annealing in a high-frequency gas discharge atmosphere. Hall measurements by the Van der Pauw technique show that the deposition of thin Eu layers on the ZnO film surface increases the concentration and mobility of majority charge carriers. The embedding of metal impurities with different ionic radii (Ag and Au) in the cation sublattice of the ZnO films to compensate misfit stresses makes it possible to enhance the concentration of radiative-recombination centers.

36 MATERIALS SCIENCE↗

Formation of Cu{sub 2}O and ZnO Crystal Layers by Magnetron Assisted Sputtering and Their Optical Characterization

Copper (I) oxide and zinc oxide films are formed on silicon and glassy quartz substrates by magnetron assisted sputtering. The thickness of the films is tens and hundreds of nanometers. The films are grown at different substrate temperatures and different oxygen pressures in the working chamber. The film samples are studied by the X-ray diffraction technique, scanning electron microscopy, and optical methods. It is established that an increase in the substrate temperature yields a change in the surface morphology of copper (I) oxide films towards the formation of well-pronounced crystallites. The reflectance and Raman spectra suggest that the quality of such films is close to that of bulk Cu{sub 2}O crystals produced by the oxidation of copper. As concerns ZnO films, an increase in the substrate temperature and an increase in the partial oxygen pressure make it possible to produce films, for which a sharp exciton structure is observed in the reflectance spectra and the emission of excitons bound at donors is observed in the luminescence spectra.

36 MATERIALS SCIENCE↗

Formation of Luminescence Spectra and Emission Intensity in the UV and Visible Spectral Regions for n-ZnO/p-GaN and n-ZnO/p-ZnO Structures when Depositing ZnO Films by High-Frequency Magnetron Sputtering

The emission spectra of structures based on ZnO films deposited by high-frequency magnetron sputtering are studied. Clearly pronounced emission lines associated with the recombination of free (λ = 363 nm) and bound excitons (λ = 377, 390, 410 nm) are observed in the PL (photoluminescence) spectra (T = 300 K) of n-ZnO/p-GaN:Mg structures, and no substantial emission is observed in the impurity PL region λ = 450–600 nm. Only emission lines characteristic of n-ZnO (λ = 374 nm) are observed in the EL (electroluminescence) spectra of n-ZnO/p-ZnO structures (T = 300 K).

36 MATERIALS SCIENCE↗

Luminescence and Stimulated Emission of Polycrystalline Cu(In,Ga)Se{sub 2} Films Deposited by Magnetron-Assisted Sputtering

The stimulated emission of Cu(In,Ga)Se{sub 2} alloy thin films formed by magnetron-assisted sputtering onto a sodium-fluoride layer deposited onto a molybdenum layer on a glass substrate is observed. The structural and optical parameters of the films are determined by scanning electron microscopy, local X-ray spectral microanalysis, X-ray structural analysis, and low-temperature luminescence (T = 10 K) measurements in the range of excitation levels of 1.6–75 kW cm{sup –2} provided by nanosecond nitrogen-laser pulses. The stimulated emission threshold corresponds to ~25 kW cm{sup –2}. Comparative analysis of the emission of Cu(In,Ga)Se{sub 2} thin films suggests that the introduction of sodium results in significant improvement of the structural quality, specifically, in a decrease in the density of energy states in the band tails and in a decrease in the concentration of nonradiative-recombination centers.

36 MATERIALS SCIENCE↗

Effect of the Temperature of Photonic Annealing on the Structural and Optical Properties of ZnO Films Synthesized by Dual Magnetron-Assisted Sputtering

Zinc-oxide films 1.4 μm in thickness are deposited onto glassy substrates by the dual magnetron-assisted sputtering of zinc targets in an argon and oxygen gas atmosphere. The dependences of the structural and optical characteristics of the ZnO films on the temperature of postdeposition photonic annealing are studied. It is established that an increase in the annealing temperature yields an increase in the degree of crystallinity of the films. Electron microscopy shows that the deposited ZnO coatings are columnar in structure and the microstructure density and crystallite size increase upon annealing. It is found that, at an annealing temperature of 450–650°C, the optical transmittance increases to >90% in the spectral range 400–1100 nm. The experimental results show that the temperature of vacuum photonic annealing has the most profound effect on the final properties of ZnO coatings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and Properties of Gallium-Oxide Films Produced by High-Frequency Magnetron-Assisted Deposition

The properties of gallium-oxide films produced by the radio-frequency magnetron-assisted sputtering of a β-Ga{sub 2}O{sub 3} target with deposition onto sapphire substrates are studied. The as-deposited gallium-oxide films are polycrystalline and contain crystallites of the α and β phases. Exposure to oxygen plasma does not bring about the appearance of new crystallites but makes crystallites several times larger in average dimensions in the substrate plane. After annealing at 900°C, the crystallite size becomes twice as large as that in the unannealed film. The films not subjected to thermal annealing exhibit a high resistance at 20°C. In the range of 50–500°C, the conductivity of the samples (G) only slightly depends on temperature (T) and, as T is elevated further, exponentially increases with the activation energy 0.7–1.0 eV. After annealing of the films in argon at 900°C (30 min), the conductivity G starts to sharply increase at T ≈ 350°C. In the dependence of lnG on T {sup –1}, a maximum in the range of 470–520°C and a portion of decreasing conductivity at higher temperatures are observed. The unusual temperature dependence of the conductivity after annealing is attributed to a change in the structure and phase composition of polycrystalline gallium-oxide films and, possibly, to some effects at the surface. The structures produced on insulating substrates are solar blind in the visible wavelength region and sensitive to radiation in the ultraviolet region (222 nm).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗