SEARCH · Engineering Papers

Results for “Linear dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Network-Wide Traffic Signal Control Using Bilinear System Modeling and Adaptive Optimization

This study proposes a new multi-input multi-output optimal bilinear signal control method in which a bilinear dynamic model approximation is used to capture the nonlinear dynamics of the urban traffic networks. With signal green time splits as the control input and traffic delay changes as the output for each intersections in the network, a bilinear system model was developed, which, on the basis of linear system modeling, takes interactions among traffic delays and signal timing splits into consideration. Based on the bilinear system modeling framework, we conducted two steps in each time interval to derive traffic control strategies: (1) we used the normalized least-squared algorithm to estimate system parameters; and (2) we solved an online optimization problem to obtain the updated traffic control inputs for the signal timing that minimizes future traffic delays. We evaluated the proposed method in a microscopic traffic simulation environment (VISSIM) with a 35-intersection network of Bellevue city in Washington. Two different traffic demand patterns: (1) normal traffic demands; and (2) time-varying traffic demands were simulated to compare the performance of different control strategies. Experimental results show that (1) the proposed bilinear system model can better describe traffic system dynamics than linear-model based methods, such as our previously developed linear-quadratic regulator control; and (2) the proposed method outperforms the state-of-the-art signal control strategies, namely the max-pressure and the self-organizing traffic light control methods. We have also shown that the proposed method is applicable to all other possible network layouts and signal controller phasing structures.

42 ENGINEERING↗

DOE OSTI2022

Spin dynamics and exchange interaction in orthoferrite TbFeO 3 with non-Kramers rare-earth ion

The low-temperature spin dynamics of the orthorhombic TbFeO 3 perovskite has been studied. It has been found that the inelastic neutron scattering (INS) spectrum of the investigated compound contains two modes corresponding to different sublattices. It is shown that the iron subsystem orders antiferromagnetically at T N =632 K and exhibits the high-energy magnon dispersion. The magnetic dynamics of this subsystem has been described within the linear spin wave theory and the in-plane and out-of-plane exchange anisotropy has been demonstrated. The approach proposed previously to describe the magnon dispersion in the TmFeO 3 compound has been used. Three levels of the nondispersive crystal electric field corresponding to Tb 3+ ions have been found in the energy region below 40 meV at about 17, 26, and 35 meV. The behavior of the magnetic correlation length of the terbium subsystem has been determined by studying the diffuse scattering at different temperatures. The evolution of this subsystem has been numerically described within the point charge model. In conclusion, it is shown that the numerical data agree satisfactorily with the experiment and with the general concept of the single-ion approximation applied to the rare-earth subsystem of orthorhombic perovskites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Entanglement and correlations in fast collective neutrino flavor oscillations

Collective neutrino oscillations play a crucial role in transporting lepton flavor in astrophysical settings like supernovae and neutron star binary merger remnants, which are characterized by large neutrino densities. In these settings, simulations in the mean-field approximation show that neutrino-neutrino interactions can overtake vacuum oscillations and give rise to fast collective flavor evolution on time-scales t ∝ μ –1 , with μ proportional to the local neutrino density. In this work, we study the full out-of-equilibrium flavor dynamics in simple multi-angle geometries displaying fast oscillations in the mean field linear stability analysis. Focusing on simple initial conditions, we analyze the production of pair correlations and entanglement in the complete many-body-dynamics as a function of the number N of neutrinos in the system, for up to thousands of neutrinos. Similarly to simpler geometries with only two neutrino beams, we identify three regimes: stable configurations with vanishing flavor oscillations, marginally unstable configurations with evolution occurring on long time scales τ ≈ µ –1 $\sqrt{N}$, and unstable configurations showing flavor evolution on short time scales τ ≈ μ –1 log(N). Here, we present evidence that these fast collective modes are generated by the same dynamical phase transition which leads to the slow bipolar oscillations, establishing a connection between these two phenomena and explaining the difference in their time scales. We conclude by discussing a semi-classical approximation which reproduces the entanglement entropy at short to medium time scales and can be potentially useful in situations with more complicated geometries where classical simulation methods starts to become inefficient.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Nonadiabatic Dynamics in a Continuous Circularly Polarized Laser Field with Floquet Phase-Space Surface Hopping

Non-adiabatic chemical reactions involving continuous circularly polarized light (cw CPL) have not attracted as much attention as dynamics in unpolarized/linearly polarized light. However, including circularly (in contrast to linearly) polarized light allows one to effectively introduce a complex-valued time-dependent Hamiltonian, which offers a new path for control or exploration through the introduction of Berry forces. Here, we investigate several inexpensive semiclassical approaches for modeling such nonadiabatic dynamics in the presence of a time-dependent complex-valued Hamiltonian, beginning with a straightforward instantaneous adiabatic fewest-switches surface hopping (IA-FSSH) approach (where the electronic states depend on position and time), continuing to a standard Floquet fewest switches surface hopping (F-FSSH) approach (where the electronic states depend on position and frequency), and ending with an exotic Floquet phase-space surface hopping (F-PSSH) approach (wherethe electronic states depend on position, frequency, and momentum). Using a set of model systems with time-dependent complex-valued Hamiltonians, we show that the Floquet phase- space adiabats are the optimal choice of basis as far as accounting for Berry phase effects and delivering accuracy. Furthermore, the F-PSSH algorithm sets the stage for modeling nonadiabatic dynamics under strong externally pumped circular polarization in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Tri-Level Linear Programming Model for Automatic Load Shedding Using Spectral Clustering

Traditional load shedding schemes can be inadequate in grids with high renewable penetration, leading to unstable events and unnecessary grid islanding. Although for both manual and automatic operating modes load shedding areas have been predefined by grid operators, they have remained fixed, and may be sub-optimal due to dynamic operating conditions. In this work, a distributed tri-level linear programming model for automatic load shedding to avoid system islanding is presented. Preventing islanding is preferred because it reduces the need for additional load shedding besides the disconnection of transmission lines between islands. This is crucial as maintaining the local generation-demand balance is necessary to preserve frequency stability. Furthermore, uneven distribution of generation resources among islands can lead to increased load shedding, causing economic and reliability challenges. This issue is further compounded in modern power systems heavily dependent on non-dispatchable resources like wind and solar. The upper-level model uses complex power flow measurements to determine the system areas to shed load depending on actual operating conditions using a spectral clustering approach. The mid-level model estimates the area system state, while the lower-level model determines the locations and load values to be shed. The solution is practical and promising for real-world applications.

Baquedano-Aguilar, Mario D.↗

DOE OSTI2021

Reservoir Computing as a Tool for Climate Predictability Studies

Reduced-order dynamical models play a central role in developing our understanding of predictability of climate irrespective of whether we are dealing with the actual climate system or surrogate climate models. In this context, the linear inverse modeling (LIM) approach, by capturing a few essential interactions between dynamical components of the full system, has proven valuable in providing insights into predictability of the full system. We demonstrate that reservoir computing (RC), a form of learning suitable for systems with chaotic dynamics, provides an alternative nonlinear approach that improves on the predictive skill of the LIM approach. We do this in the example setting of predicting sea surface temperature in the North Atlantic in the preindustrial control simulation of a popular earth system model, the Community Earth System Model so that we can compare the performance of the new RC-based approach with the traditional LIM approach both when learning data are plentiful and when such data are more limited. The improved predictive skill of the RC approach over a wide range of conditions—larger number of retained EOF coefficients, extending well into the limited data regime, etc.—suggests that this machine-learning technique may have a use in climate predictability studies. While the possibility of developing a climate emulator—the ability to continue the evolution of the system on the attractor long after failing to be able to track the reference trajectory—is demonstrated in the Lorenz-63 system, it is suggested that further development of the RC approach may permit such uses of the new approach in more realistic predictability studies.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Backbone Dynamics of Bottlebrush Polymers Studied by Neutron Scattering

Bottlebrush polymers have a versatile architecture that is highly customizable due to the combination of a linear backbone and side chains. As a result of the chemical tethering of the side chains, both parts cannot be easily be separated. Huge effort is seen regarding the dynamical behavior of the side chains or the entire bottlebrush polymer, whereas few studies are available considering the backbone. Here, isotopic labeling in combination with quasi-elastic neutron scattering was used to compare the dynamical behavior of the bottlebrush’s backbone with the side chain dynamics. Keeping the side chains deuterated, (h-PNB)- g -(d-PPO), leads to the scattering signal dominated by backbone dynamics, while the fully protonated sample, (h-PNB)- g -(h-PPO), gives side chain dynamics. Both results reveal slower dynamics associated with the backbone with less heterogeneity, as seen for the side chains. Additionally, a plasticizer effect for the backbone dynamics is confirmed by extracting the glass transition temperature and comparing it with pure linear PNB.

neutron scattering↗

DOE OSTI2022

Optically induced changes in the band structure of the Weyl charge-density-wave compound (TaSe 4 ) 2 I

Collective modes are responsible for the emergence of novel quantum phases in topological materials. In the quasi-one dimensional (1D) Weyl semimetal (TaSe 4 ) 2 I , a charge density wave (CDW) opens band gaps at the Weyl points, thus turning the system into an axionic insulator. Melting the CDW would restore the Weyl phase, but 1D fluctuations extend the gapped regime far above the 3D transition temperature (T CDW = 263 K), thus preventing the investigation of this topological phase transition with conventional spectroscopic methods. Here we use a non-equilibrium approach: we perturb the CDW phase by photoexcitation, and we monitor the dynamical evolution of the band structure by time- and angle-resolved photoelectron spectroscopy. We find that, upon optical excitation, electrons populate the linearly dispersing states at the Fermi level (E F ), and fill the CDW gap. The dynamics of both the charge carrier population and the band gap renormalization (BGR) show a fast component with a characteristic time scale of a few hundreds femtoseconds. However, the BGR also exhibits a second slow component on the µs time scale. The combination of an ultrafast response and of persistent changes in the spectral weight at E$_\mathrm{F}$, and the resulting sensitivity of the linearly dispersing states to optical excitations, may explain the high performances of (TaSe 4 ) 2 I as a material for broadband infrared photodetectors.

36 MATERIALS SCIENCE↗

DOE OSTI2022

The role of deviatoric stress and dislocations on the α to ω phase transformation in Ti

Under extreme conditions, α-Ti becomes unstable and transforms either into β-Ti at high temperature or into ω-Ti at high pressure. In what concerns the α to ω phase transformation (PT), there has been a wide range of experimentally reported transition pressures from approximately 2 to 15 GPa at room temperature. Deviatoric stresses and internal defects are often assumed to be the root cause of this variation. Here, in this study, these postulates are revisited using both continuum mechanics and molecular dynamics (MD) simulations. First, a simple continuum model, assuming linear elasticity and isotropic plasticity, is developed to describe the effects of applied stress and dislocations on the stability of an ω nucleus in an infinite α domain. Second, a new MD simulation method is developed to generate an ω nucleus in the α domain utilizing the displacement field identified from the topological analysis. Results from MD simulations show that despite the fact that phase diagrams typically delineate the limits between two phases in terms of only P and T, deviatoric stress promotes the α to ω phase transformation by reducing the critical radius above which an ω nucleus is stable. Furthermore, the required deviatoric stress to nucleate and stabilize a nanoscale ω nucleus is likely emanating from the internal stress of defects such as dislocations. The MD-informed micromechanics models are used to identify favorable configurations where dislocations help favor the α to ω transformation. These configurations show that the interaction with a basal or prismatic dislocation reduces the critical radius of a ω nucleus by about 10 or 16 %, respectively. In addition, prismatic edge dislocations are found to promote the growth of ω nucleus when interacting with the ($\bar{1}$$\bar{1}$20) α //(0001) ω interface. Importantly, a simple model of the arrival of dislocation at an ω nucleus suggests that PT does not necessarily require a pile-up to be present but could alternatively be mediated by a constant rapid flow of dislocations.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Parameter Reduction of Composite Load Model Using Active Subspace Method

Over the past decades, the increasing penetration of distributed energy resources (DERs) has dramatically changed the power load composition in the distribution networks. The traditional static and dynamic load models can hardly capture the dynamic behavior of modern loads especially for fault-induced delayed voltage recovery (FIDVR) events. Thus, a more comprehensive composite load model with combination of static load, different types of induction motors, single-phase A/C motor, electronic load and DERs has been proposed by Western Electricity Coordinating Council (WECC). However, due to the large number of parameters and model complexity, the WECC composite load model (WECC CMLD) raises new challenges to power system studies. To overcome these challenges, in this paper, a cutting-edge parameter reduction (PR) approach for WECC CMLD based on active subspace method (ASM) is proposed. Firstly, the WECC CMLD is parameterized in a discrete-time manner for the application of the proposed method. Then, parameter sensitivities are calculated by discovering the active subspace, which is a lower-dimensional linear subspace of the parameter space of WECC CMLD in which the dynamic response is most sensitive. The interdependency among parameters can be taken into consideration by our approach. Finally, the numerical experiments validate the effectiveness and advantages of the proposed approach for WECC CMLD model.

active subspace↗

DOE OSTI2020

Dynamics of poly[n]catenane melts

Inspired by advances in the chemical synthesis of interlocking polymer architectures, extensive molecular dynamics simulations have been conducted to study the dynamical properties of poly[n]catenanes-polymers composed entirely of interlocking rings-in the melt state. Both the degree of polymerization (number of links) and the number of beads per ring are systematically varied, and the results are compared to linear and ring polymers. Herein, a simple Rouse-like model is presented, and its analytical solution suggests a decomposition of the dynamics into "ring-like" and "linear-like" regimes at short and long times, respectively. In agreement with this picture, multiple sub-diffusive regimes are observed in the monomer mean-squared-displacements even though interchain entanglement is not prevalent in the system. However, the Rouse-type model does not account for the topological effects of the mechanical bonds, which significantly alter the dynamics at intermediate length scales both within the rings and at the chain segment scales. The stress relaxation in the system is extremely rapid and may be conveniently separated into ring-like and linear-like contributions, again in agreement with the Rouse picture. However, the viscosity has a non-monotonic dependence on the ring size for long chains, which disagrees strongly with theoretical predictions. This unexpected observation cannot be explained in terms of chain disentanglement and is inconsistent with other measures of polymer relaxation. Possible mechanisms for this behavior are proposed and implications for materials design are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Variational design principles for nonequilibrium colloidal assembly

Using large deviation theory and principles of stochastic optimal control, we show that rare molecular dynamics trajectories conditioned on assembling a specific target structure encode a set of interactions and external forces that lead to enhanced stability of that structure. Such a relationship can be formulated into a variational principle, for which we have developed an associated optimization algorithm and have used it to determine optimal forces for targeted self-assembly within nonequilibrium steady-states. We illustrate this perspective on inverse design in a model of colloidal cluster assembly within linear shear flow. We find that colloidal clusters can be assembled with high yield using specific short-range interactions of tunable complexity. Shear decreases the yields of rigid clusters, while small values of shear increase the yields of nonrigid clusters. The enhancement or suppression of the yield due to shear is rationalized with a generalized linear response theory. Furthermore, by studying 21 unique clusters made of six, seven, or eight particles, we uncover basic design principles for targeted assembly out of equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Interpreting and Stabilizing Machine-Learning Parametrizations of Convection

Neural networks are a promising technique for parameterizing subgrid-scale physics (e.g., moist atmospheric convection) in coarse-resolution climate models, but their lack of interpretability and reliability prevents widespread adoption. For instance, it is not fully understood why neural network parameterizations often cause dramatic instability when coupled to atmospheric fluid dynamics. This paper introduces tools for interpreting their behavior that are customized to the parameterization task. First, we assess the nonlinear sensitivity of a neural network to lower-tropospheric stability and the midtropospheric moisture, two widely studied controls of moist convection. Second, we couple the linearized response functions of these neural networks to simplified gravity wave dynamics, and analytically diagnose the corresponding phase speeds, growth rates, wavelengths, and spatial structures. To demonstrate their versatility, these techniques are tested on two sets of neural networks, one trained with a super-parameterized version of the Community Atmosphere Model (SPCAM) and the second with a near-global cloud-resolving model (GCRM). Additionally, even though the SPCAM simulation has a warmer climate than the cloud-resolving model, both neural networks predict stronger heating/drying in moist and unstable environments, which is consistent with observations. Moreover, the spectral analysis can predict that instability occurs when GCMs are coupled to networks that support gravity waves that are unstable and have phase speeds larger than 5 m s -1 . In contrast, standing unstable modes do not cause catastrophic instability. Using these tools, differences between the SPCAM-trained versus GCRM-trained neural networks are analyzed, and strategies to incrementally improve both of their coupled online performance unveiled.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Microscopic dynamics underlying the stress relaxation of arrested soft materials

Arrested soft materials such as gels and glasses exhibit a slow stress relaxation with a broad distribution of relaxation times in response to linear mechanical perturbations. Although this macroscopic stress relaxation is an essential feature in the application of arrested systems as structural materials, consumer products, foods, and biological materials, the microscopic origins of this relaxation remain poorly understood. Here, we elucidate the microscopic dynamics underlying the stress relaxation of such arrested soft materials under both quiescent and mechanically perturbed conditions through X-ray photon correlation spectroscopy. By studying the dynamics of a model associative gel system that undergoes dynamical arrest in the absence of aging effects, we show that the mean stress relaxation time measured from linear rheometry is directly correlated to the quiescent superdiffusive dynamics of the microscopic clusters, which are governed by a buildup of internal stresses during arrest. We also show that perturbing the system via small mechanical deformations can result in large intermittent fluctuations in the form of avalanches, which give rise to a broad non-Gaussian spectrum of relaxation modes at short times that is observed in stress relaxation measurements. These findings suggest that the linear viscoelastic stress relaxation in arrested soft materials may be governed by nonlinear phenomena involving an interplay of internal stress relaxations and perturbation-induced intermittent avalanches.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Multibody for Everybody (M4E) - A Linearization Approach to Enable Frequency Domain Analysis, Time Integration and Control Co-Design

1.1 Background/Objectives: Marine energy represents a promising yet underexploited source of power. To increase the harvested power, significant efforts have been made to improve wave energy converter (WEC) modeling capabilities and optimize power take-off (PTO) performance; however, these efforts have often treated WEC dynamics, PTO design, and controller development sequentially. In contrast, control co-design (CCD) is emerging as a promising strategy to address these issues directly, creating a growing need for fast analysis tools suitable for repeated simulation and parametric studies [1]. To support this need, this work presents the Multibody for Everybody (M4E) [2] linearization module, which employs a symbolic toolbox to provide deeper insight of WEC design parameters. The objective is to demonstrate that a minimal-coordinate linearization of articulated WEC dynamics can provide accurate wave response predictions and substantial computational savings relative to nonlinear time-domain simulation, while preserving compatibility with broader wave-energy analysis workflows, enabling CCD. 1.2 Approach/Activities: The proposed approach linearizes the equations of motion, generated by M4E, in minimal coordinates about a selected operating point and combines the resulting system with frequencydomain hydrodynamic terms to incorporate the reduced mass, damping, stiffness, and forcing operators. The linearized model is used for both impedance-based response amplitude operator (RAO) prediction and rapid regular-wave time integration. The methodology is demonstrated on a single-flap device and a FOSWEC configuration, with linearized M4E responses compared against the corresponding nonlinear M4E simulations and WEC-Sim results. Regular-wave time histories, RAO trends, and runtime differences are assessed. The framework is also compatible with broader wave-energy workflows, including coupling to WecOptTool, although that capability is not the focus of this work [3]. 1.3 Results/Lessons: The linearized M4E model reproduces key regularwave response characteristics such as integration and Response Amplitude over multiple frequencies. This module matches nonlinear M4E and WEC-Sim results while substantially reducing integration cost. Thus, the proposed framework can serve as a rapid analysis layer for articulated WEC design, parameter studies, and controls-oriented workflows. The analysis is most appropriate in the near-equilibrium regime, about the linearization point.

16 TIDAL AND WAVE POWER↗

DOE OSTI2024

Probabilistic measures for biological adaptation and resilience

This paper introduces an approach to quantifying ecological resilience in biological systems, particularly focusing on noisy systems responding to episodic disturbances with sudden adaptations. Incorporating concepts from nonequilibrium statistical mechanics, we propose a measure termed “ecological resilience through adaptation,” specifically tailored to noisy, forced systems that undergo physiological adaptation in the face of stressful environmental changes. Randomness plays a key role, accounting for model uncertainty and the inherent variability in the dynamical response among components of biological systems. Our measure of resilience is rooted in the probabilistic description of states within these systems and is defined in terms of the dynamics of the ensemble average of a model-specific observable quantifying success or well-being. Our approach utilizes stochastic linear response theory to compute how the expected success of a system, originally in statistical equilibrium, dynamically changes in response to a environmental perturbation and a subsequent adaptation. Importantly, the resulting mathematical derivations allow for the estimation of resilience in terms of ensemble averages of simulated or experimental data. Finally, through a simple but clear conceptual example, we illustrate how our resilience measure can be interpreted and compared to other existing frameworks in the literature. The methodology is general but inspired by applications in plant systems, with the potential for broader application to complex biological processes.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2024

Parametric reduced-order modeling for component-oriented treatment and localized nonlinear feature inclusion

Abstract We propose coupling a physics-based reduction framework with a suited response decomposition technique to derive a component-oriented reduction (COR) approach, which is suitable for assembly systems featuring localized nonlinearities. Dependencies on influencing parameters are injected into the reduced-order model (ROM), thus ensuring robustness and validity over a domain of parametric inputs, while capturing nonlinear effects. The implemented approach employs individual component modes to capture localized features while additionally relying on reduced modes of a global nature to approximate the system’s dynamics accurately. The global modes are derived from a linear monolithic system, defined as a result of a coordinate separation scheme, which permits the proposed COR-ROM to naturally couple the response between linear and nonlinear subdomains. The derived low-order representation utilizes a proper orthogonal decomposition projection and is additionally reinforced with the inclusion of a hyper-reduction technique to capture the underlying high-fidelity model response while providing accelerated computations. The resulting approach is exemplified in the synthetic case studies of a four-story shear frame with multiple nonlinear regions driven by hysteresis and a large-scale kingpin connection featuring plasticity.

Vlachas, Konstantinos (ORCID:000000029124219X)↗

DOE OSTI2025

A bilevel multistage stochastic self-scheduling model with indivisibilities for trading in the continuous intraday electricity market

In this paper, we study the profit maximization problem of a virtual power plant trading in the continuous intraday electricity market. Our virtual power plant model is compatible with renewable, and thermal assets, covering a range of virtual power plants currently participating in energy markets. We model the trading problem as a bilevel multistage stochastic program. The upper level of the problem accounts for the profit maximization of the virtual power plant with explicit modeling of the technical constraints of the operational status of the thermal power plant including minimum start-up and shut-down times, ramp-up and ramp-down rates, and minimum generation level. The upper level also decides which continuous and indivisible (fill-or-kill) orders are submitted to the market. The lower-level problem accounts for the clearing of the continuous intraday market, i.e., matching of buy and sell orders. Because of the presence of fill-or-kill orders, the lower-level problem is mixed-integer, which prevents its direct conversion to a single-level problem using duality. In order to solve this challenging problem, we develop a convex-hull extended formulation for the lower-level problem, apply duality theory to obtain a single-level stochastic equivalent formulation, and employ McCormick envelopes to turn the problem into a multistage stochastic mixed-integer linear problem, which we solve using the stochastic dual dynamic integer programming algorithm. We conduct numerical experiments and analyze the optimal trading behavior of a virtual power plant trading in an ideal continuous market without arbitrage.

Bilevel multistage stochastic programming problem↗