Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LiP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Description and calibration of the Langley Hypersonic CF4 tunnel: A facility for simulating low gamma flow as occurs for a real gas

The Langley Hypersonic CF4 Tunnel is a Mach 6 facility which simulates an important aspect of dissociative real-gas phenomena associated with the reentry of blunt vehicles, i.e., the decrease in the ratio of specific heats (gamma) that occurs within the shock layer of the vehicle. A general description of this facility is presented along with a discussion of the basic components, instrumentation, and operating procedure. Pitot-pressure surveys were made at the nozzle exit and downstream of the exit for reservoir temperatures from 1020 to 1495 R and reservoir pressures from 1000 to 2550 psia. A uniform test core having a diameter of circa 11 in. (0.55 times the nozzle-exit diameter) exists at the maximum value of reservoir pressure and temperature. The corresponding free-stream Mach number is 5.9, the unit Reynolds number is 4 x 10 to the 5th power per foot, the ratio of specific heats immediately behind a normal shock is 1.10, and the normal-shock density ratio is 12.6. When the facility is operated at reservoir temperatures below 1440 R, irregularities occur in the pitot-pressure profile within a small region about the nozzle centerline. These variations in pitot pressure indicate the existence of flow distrubances originating in the upstream region of the nozzle. This necessitates testing models off centerline in the uniform flow between the centerline region and either the nozzle boundary layer or the lip shock originating at the nozzle exit. Samples of data obtained in this facility with various models are presented to illustrate the effect of gamma on flow conditions about the model and the importance of knowing the magnitude of this effect.

Midden, Raymond E.↗
NASA NTRS1987

Numerical simulation of three-dimensional supersonic inlet flow fields

Supersonic inlet flows with mixed external-internal compressions of an axisymmetric inlet model were computed using a combined implicit-explicit (Beam-Warming-Steger/MacCormack) method for solving the three-dimensional unsteady, compressible Navier-Stokes equations in conservation form. Numerical calculations were made of various flows typically found in supersonic inlets such as shock-wave intersections, flow spillage around the cowl lip, shock-wave/boundary-layer interactions, control of shock-induced flow separation by means of boundary layer bleed, internal normal (terminal) shocks, and the effects of flow incidence. Computed results were compared with available wind tunnel data.

Kawamura, T.↗
NASA NTRS1987

A computational study of the flowfield surrounding the Aeroassist Flight Experiment vehicle

A symmetric total variation diminishing (STVD) algorithm has been applied to the solution of the three-dimensional hypersonic flowfield surrounding the Aeroassist Flight Experiment (AFE) vehicle. Both perfect-gas and chemical nonequilibrium models have been used. The perfect-gas flows were computed at two different Reynolds numbers, including a flight trajectory point at maximum dynamic pressure, and on two different grids. Procedures for coupling the solution of the species continuity equations with the Navier-Stokes equations in the presence of chemical nonequilibrium are reviewed and tested on the forebody of the AFE and on the complete flowfield assuming noncatalytic wall and no species diffusion. Problems with the STVD algorithm unique to flows with variable thermodynamic properties (real gas) are identified and algorithm modifications are suggested. A potential heating problem caused by strong flow impingement on the nozzle lip in the near wake at 0-deg angle of attack has been identified.

Gnoffo, Peter A.↗
NASA NTRS1988

Tool Removes Arc-Light Reflectors

New tool makes installation, adjustment, and removal of self-clamping arc-light reflectors on welding torches easy and simple. Consists of two arms reaching around from back of torch. Lip on each arm hooks into slot of arc-light reflector clamp. When handles squeezed together, slot spreads enabling easy installation, adjustment, or removal of reflector without disassembly of welding apparatus.

Gordon, Stephen S.↗
NASA NTRS1987

High-speed inlet research program and supporting analyses

A Mach 5 cruise aircraft was studied in a joint program effort. The propulsion system chosen for this aircraft was an over-under turbojet/ramjet system. The ramjet portion of the inlet is to be tested in NASA Lewis' 10 x 10 SWT. Goals of the test program are to obtain performance data and bleed requirements, and also to obtain analysis code validation data. Supporting analysis of the inlet using a three-dimensional Navier-Stokes code (PEPSIS) indicates that sidewall shock/boundary layer interactions cause large separated regions in the corners underneath the cowl. Such separations generally lead to inlet unstart, and are thus a major concern. As a result of the analysis, additional bleed regions were added to the inlet model sidewalls and cowl to control separations in the corners. A two-dimensional analysis incorporating bleed on the ramp is also presented. Supporting experiments for the Mach 5 programs were conducted in the Lewis' 1 x 1 SWT. A small-scale model representing the inlet geometry up to the ramp shoulder and cowl lip was tested to verify the accelerator plate test technique and to obtain data on flow migration in the ramp and sidewall boundary layers. Another study explored several ramp bleed configurations to control boundary layer separations in that region. Design of a two-dimensional Mach 5 cruise inlet represents several major challenges including multimode operation and dual flow, high temperatures, and three-dimensional airflow effects.

Coltrin, Robert E.↗
NASA NTRS1987

Numerical simulation of self-sustained and forced oscillations in jet shear layers

Excitation of axisymmetric jet shear layers has been investigated by solving the time-dependent compressible Navier-Stokes equations. MacCormack's explicit finite difference scheme is used in performing the computations on a CRAY X-MP computer. This work examines the influence of various means of excitation of the shear layer, to produce large scale vortex structures in such a manner that the mixing between two flows will be enhanced or diminished. While successful pressure excitation has been achieved in previous studies only limited success with temperature excitation at the inflow boundary has been accomplished. The current study focuses on the use of temperature excitation through the boundary layer immediately inside the jet lip. In order to achieve the required resolution significant grid refinement is necessary. The results of the computation with and without temperature excitation are analyzed and compared with results obtained using pressure excitation. The influence of amplitude and frequency on specific flow characteristics are also examined. The excitation frequency for both the temperature and pressure corresponds to a Strouhal number of .45 and the inflow jet Mach number is approximately .3.

Scott, J. N.↗
NASA NTRS1988

A point implicit unstructured grid solver for the Euler and Navier-Stokes equations

An upwind finite element technique that uses cell centered quantities and implicit and/or explicit time marching has been developed for computing hypersonic laminar viscous flows using adaptive unstructured triangular grids. A structured grid of quadrilaterals is laid out near the body surface. For inviscid flows the method is stable at Courant numbers of over 100,000. A first order basic scheme and a higher order flux corrected transport (FCT) scheme have been implemented. This technique has been applied to the problem of predicting type III and IV shock wave interactions on a cylinder, with a view of simulating the pressure and heating rate augmentation caused by an impinging shock on the leading edge of a cowl lip of an engine inlet. The predictions of wall pressure and heating rates compare very well with experimental data. The flow features are very distinctly captured with a sequence of adaptively generated grids. The adaptive mesh generator and the upwind Navier-Stokes solver are combined in a set of programs called LARCNESS, an acronym for Langley Adaptive Remeshing Code and Navier-Stokes Solver.

Thareja, Rajiv R.↗
NASA NTRS1988

Unsteady viscous calculations of supersonic flows past deep and shallow three-dimensional cavities

Computational simulations were performed for supersonic, turbulent flows over deep and shallow three-dimensional cavities. The width and the depth of these cavities were fixed at 2.5 in. and 0.5 in., respectively. Length-to-depth ratio of the deep cavity was 6 and that of the shallow cavity was 16. Freestream values of Mach number and Reynolds number were 1.50 and 2.0 x 10 to the 6th/ft., respectively, at a total temperature of 585 R. The thickness of the turbulent boundary layer at the front lip of the cavity was 0.2 in. Simulations of these oscillatory flows were generated through time-accurate solutions of Reynolds-averaged full Navier-Stokes equations using the explicit MacCormack scheme. The solutions are validated through comparisons with experimental data. The features of open and closed cavity flows and effects of the third dimension are illustrated through computational graphics.

Baysal, O.↗
NASA NTRS1987

Calculation of external-internal flow fields for mixed-compression inlets

Supersonic inlet flows with mixed external-internal compressions were computed using a combined implicit-explicit (Beam-Warming-Steger/MacCormack) method for solving the three-dimensional unsteady, compressible Navier-Stokes equations in conservation form. Numerical calculations were made of various flows related to such inlet operations as the shock-wave intersections, subsonic spillage around the cowl lip, and inlet started versus unstarted conditions. Some of the computed results were compared with wind tunnel data.

Chyu, W. J.↗
NASA NTRS1988

3-D plume flow computations with an upwind solver

In the present study multi-nozzle plume flows are computed with a three-dimensional, Navier-Stokes solver. Numerical simulations are performed with the flux-split, two-factor, time symptotic, viscous flow solver. The two factor splitting provides a stable three-dimensional solution procedure under ideal-gas assumptions. Viscous, ideal-gas solutions for a thin lip symmetrical nozzle are compared with experimental and numerical solutions. Computed solutions to axisymmetric and three-dimensional, multi-nozzle problems at various altitudes and flight conditions demonstrate flow field complexity and three-dimensional effects.

Venkatapathy, Ethiraj↗
NASA NTRS1986

Isolated testing of highly maneuverable inlet con cepts

Ten percent scale models of a Mach 2.2 two dimensional inlet and a Mach 2.0 axisymmetric inlet were tested in the NASA Lewis Research Center 8'x6' Supersonic Wind Tunnel as part of a cooperative effort with the McDonnell Aircraft Company. The objective of this effort was to test methods designed to increase the maneuvering performance of fighter aircraft inlets. Maneuvering improvement concepts were tested up to 40-deg angle of attack for Mach numbers of 0.6 and 0.9, and up to 25 deg for Mach numbers 1.2 and 1.4. Maneuvering improvement concepts included a rotating cowl lip, auxiliary inlets aft of the inlet throat, and a retracting centerbody for the axisymmetric inlet. Test results show that the rotating cowl design was effective in improving subsonic maneuvering performance for both inlets. Auxiliary inlets did not produce significant performance increases for either model. The retracted centerbody resulted in some performance benefits at high angles of attack. None of the maneuvering improvement concepts were effective at Mach 1.2 and 1.4.

Norby, W. P.↗
NASA NTRS1989

Indium phosphide solar cell research in the US: Comparison with nonphotovoltaic sources

Highlights of the InP solar cell research program are presented. Homojunction cells with AMO efficiences approaching 19 percent were demonstrated while 17 percent was achieved for indium tin oxide (ITO)/InP cells. The superior radiation resistance of these latter two cell configurations over both Si and GaAs were demonstrated. InP cells on board the LIPS III satellite show no degradation after more than a year in orbit. Computer modeling calculations were directed toward radiation damage predictions and the specification of concentrator cell parameters. Computed array specific powers, for a specific orbit, are used to compare the performance of an InP solar cell array to solar dynamic and nuclear systems.

Weinberg, I.↗
NASA NTRS1988

The mixing mechanism by organised turbulence structures in a plane jet excited by a novel method

The effect on a plane subsonic turbulent jet of controlled high-amplitude periodic oscillations applied to the nozzle is investigated experimentally. A variable-speed motor and a gear-cam mechanism are used to make the lips of the nozzle reciprocate in opposite directions at the desired frequency. Velocity profiles, flow visualizations, and pressure-signal traces are presented and analyzed in detail. The complex vortex processes involved in the oscillation-induced spreading and entrainment of the jet are explored, and a critical Strouhal number for vortex formation and amplification is determined. The oscillation technique is found to augment the thrust of a jet/duct-diffuser configuration by a factor of 1.20; the thrust increases with oscillation frequency up to 20 Hz and remains constant if the frequency is further increased.

Badri Narayanan, M. A.↗
NASA NTRS1989

A three-dimensional upwind finite element point implicit unstructured grid Euler solver

A three-dimensional upwind finite element technique that uses cell-centered quantities and implicit and/or explicit time marching was developed for computing hypersonic inviscid flows using adaptive unstructured grids. This technique was used to predict shock interference on a swept cylinder. An attempt was made to determine the flowfield and, in particular, the pressure augmentation caused by an impinging shock on the swept leading edge of a cowl lip of an engine inlet.

Thareja, Rajiv R.↗
NASA NTRS1988

Navier-Stokes calculations of transonic flows past open and transitional cavities

Computational simulations of deep and transitional cavities at transonic regimes were performed. The three-dimensional unsteady separation on the cavity floor was analyzed, and computational flow visualization inside the cavity was done. A parametric study was performed to investigate the effects of varying Mach number and the ratio delta/D, where delta is the instantaneous boundary layer thickness at the upstream lip and D is the depth. Both time-averaged and instantaneous solutions were obtained. Comparison of the solutions with experimental data were generally favorable; some discrepancies are explained.

Srinivasan, S.↗
NASA NTRS1990

Simulated Hypersonic Flows About A Blunt Body

Unsteady and steady flows compared. Report describes computer numerical study of two-dimensional, unsteady, viscous, hypersonic flows of air about blunt body with impinging shock. This kind of flow represents many practical phenomena; for example, interaction of fluctuating bow shock of hypersonic airplane with shocks of leading edge of wing or of lip of cowl at inlet to engine. Such interactions give rise to complicated, moving shock-on-shock patterns.

Kutler, P.↗
NASA NTRS1987

Nacelle design

The external cowlings of engine nacelles on large turbofan powered aircraft are good candidates for application of natural laminar flow. These nacelles usually have shorter characteristic lengths than other candidate surfaces such as wings and fuselages and therefore have lower characteristic Reynolds numbers. A conceptive figure of the natural flow nacelle (NLF) is shown. On the typical nacelle the flow accelerates to a curvature induced velocity peak near the lip and then decelerates over the remainder of the nacelle length. Transition occurs near the start of the deceleration, so turbulent flow with high friction coefficient exists over most of the nacelle length. On the other hand, the NLF nacelle is contoured to have an accelerating flow over most of its length, so transition is delayed, and a relatively lower friction drag exists over most of the nacelle. The motivation for development of the LFN is a potential 40 to 50 percent reduction in nacelle friction drag.

Faust, G. K.↗
NASA NTRS1989

Euler and Navier-Stokes solutions for hypersonic flows

An upwind finite-element technique that uses cell-centered quantities and implicit and/or explicit time marching has been developed for computing hypersonic laminar viscous flows using adaptive unstructured grids in two and three dimensions. A perfect gas model as well as an equilibrium air model is implemented for solving high-speed flows. A first-order basic scheme and a higher-order flux-corrected transport (FCT) scheme have been implemented. This technique has been used to predict 'Type III and IV' shock interactions on a cylinder in two dimensions and a swept cylinder in three dimensions, with a view to determine the pressure and heating rate augmentation caused by an impinging shock on the leading edge of a cowl lip of an engine inlet. The predictions of wall pressure and heating rates compare very well with experimental data. The flow features are very distinctly captured with a sequence of adaptively-generated grids. Three-dimensional corner flow, typically encountered in engine inlets due to compression of the flow by ramps in the walls, is also modeled. This procedure is the first step in developing an integrated fluid, thermal, structural analysis capability for hypersonic flight vehicles like the National Aero-Space Plane.

Thareja, Rajiv R.↗