Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Large Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Occupational disorder as the origin of flattening of the acoustic phonon branches in the clathrate Ba 8 ⁢Ga 16 ⁢Ge 30

In the search for high-performance thermoelectrics, materials such as clathrates have drawn attention due to having both glasslike low phonon thermal conductivity and crystal-like high electrical conductivity. Ba 8 ⁢Ga 16 ⁢Ge 30 (BGG) has a loosely bound guest Ba atom trapped inside rigid Ga-Ge cage structures. Avoided crossings between acoustic phonons and the flat guest atom branches have been proposed to be the source of the low lattice thermal conductivity of BGG. Ga-Ge site disorder with Ga and Ge exchanging places in different unit cells has also been reported. We used time-of-flight neutron scattering to measure the complete phonon spectrum in a large single crystal of BGG and compared these results with predictions of density functional theory to elucidate the effect of the disorder on heat-carrying phonons. Experimental results agreed much better with the calculation assuming the disorder than with the calculation assuming the ordered configuration. Although the atomic masses of Ga and Ge are nearly identical, we found that disorder strongly reduces phonon group velocities, which significantly reduces thermal conductivity. Finally, our work points to a path towards optimizing thermoelectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic dynamics of water ultra-confined in macroscopically oriented channels of single-crystal beryl: A multi-frequency analysis

The properties of fluids can be significantly altered by the geometry of their confining environments. While there has been significant work on the properties of such confined fluids, the properties of fluids under ultraconfinement, environments where, at least in one plane, the dimensions of the confining environment are similar to that of the confined molecule, have not been investigated. This paper investigates the dynamic properties of water in beryl (Be3Al2Si6O18), the structure of which contains approximately 5-A-diam channels parallel to the c axis. Three techniques, inelastic neutron scattering, quasielastic neutron scattering, and dielectric spectroscopy, have been used to quantify these properties over a dynamic range covering approximately 16 orders of magnitude. Because beryl can be obtained in large single crystals we were able to quantify directional variations, perpendicular and parallel to the channel directions, in the dynamics of the confined fluid. These are significantly anisotropic and, somewhat counterintuitively, show that vibrations parallel to the c-axis channels are significantly more hindered than those perpendicular to the channels. The effective potential for vibrations in the c direction is harder than the potential in directions perpendicular to it. There is evidence of single-file diffusion of water molecules along the channels at higher temperatures, but below 150 K this diffusion is strongly suppressed. No such suppression, however, has been observed in the channel-perpendicular direction. Inelastic neutron scattering spectra include an intramolecular stretching O-H peak at 465 meV. As this is nearly coincident with that known for free water molecules and approximately 30 meV higher than that in liquid water or ice, this suggests that there is no hydrogen bonding constraining vibrations between the channel water and the beryl structure. However, dielectric spectroscopic measurements at higher temperatures and lower frequencies yield an activation energy for the dipole reorientation of 16.4 0.14 kJ/mol, close to the energy required to break a hydrogen bond in bulk water. This may suggest the presence of some other form of bonding between the water molecules and the structure, but the resolution of the apparent contradiction between the inelastic neutron and dielectric spectroscopic results remains uncertain.

Mamontov, Eugene↗

Large thermoelectric power factor from crystal symmetry-protected non-bonding orbital in half-Heuslers

Modern society relies on high charge mobility for efficient energy production and fast information technologies. The power factor of a material—the combination of electrical conductivity and Seebeck coefficient—measures its ability to extract electrical power from temperature differences. Recent advancements in thermoelectric materials have achieved enhanced Seebeck coefficient by manipulating the electronic band structure. However, this approach generally applies at relatively low conductivities, preventing the realization of exceptionally high-power factors. In contrast, half-Heusler semiconductors have been shown to break through that barrier in a way that could not be explained. Here, we show that symmetry-protected orbital interactions can steer electron–acoustic phonon interactions towards high mobility. This high-mobility regime enables large power factors in half-Heuslers, well above the maximum measured values. We anticipate that our understanding will spark new routes to search for better thermoelectric materials, and to discover high electron mobility semiconductors for electronic and photonic applications.

42 ENGINEERING↗

The etching process of boron nitride by alkali and alkaline earth fluorides under high pressure and high temperature

Graphical abstract: - Highlights: • Appropriate etch processes of hBN and cBN under HPHT are proposed. • The degree of the crystallization of hBN was decreased. • A special cBN growth mechanism with a triangular unit is proposed. • Plate-shape cBN crystals with large ratio of length to thickness were obtained. • A strategy provides useful guidance for controlling the cBN morphology. - Abstract: Some new etching processes of hexagonal boron nitride (hBN) and cubic boron nitride (cBN) under high pressure and high temperature in the presence of alkali and alkaline earth fluorides have been discussed. It is found that hBN is etched distinctly by alkali and alkaline earth fluorides and the morphology of hBN is significantly changed from plate-shape to spherical-shape. Based on the “graphitization index” values of hBN, the degree of the crystallization of hBN under high pressure and high temperature decreases in the sequence of LiF > CaF{sub 2} > MgF{sub 2}. This facilitates the formation of high-quality cBN single crystals. Different etch steps, pits, and islands are observed on cBN surface, showing the strong etching by alkali and alkaline earth fluorides and the tendency of layer-by-layer growth. A special layer growth mechanism of cBN with a triangular unit has been found. Furthermore, the morphologies of cBN crystals are apparently affected by a preferential surface etching of LiF, CaF{sub 2} and MgF{sub 2}. Respectively, the plate-shape and tetrahedral cBN crystals can be obtained in the presence of different alkali and alkaline earth fluorides.

36 MATERIALS SCIENCE↗

Optimizing and Exploring Untapped Micro-Hydro Hybrid Systems: a Multi-Objective Approach for Crystal Lake as a Large-Scale Energy Storage Solution

Increasing electricity demand and concerns about climate change and fossil fuel consumption have highlighted the importance of renewable energy resources and storage systems. This paper proposes a method for exploring untapped pumped hydro storage potentials to accommodate intermittent renewable energy generation profiles. Hourly measured data from 2022 in Benzie County, Michigan, United States, were gathered for system sizing and a thorough, realistic analysis. By employing the multi-objective grey wolf optimization algorithm, we formulated optimal sizing and energy-management strategies for three different scenarios. Unlike similar studies, the 3rd with triple objective functions (OFs) scenario aims to maximize both reliability and ecological OFs while minimizing the cost OF. It has shown promising results with multiple solutions, considering economic, environmental, and reliability factors. A case study conducted in Crystal Lake, Michigan, revealed that although Crystal Lake would function only as a micro-hydro power facility, it is a promising and huge storage unit with a substantial storage capacity of around 14.9734GWh. The system investigated is significant in the USA due to its rapid deployment capabilities, minimal construction requirements, and ease of integration with the distribution grid. The fuzzy logic method was employed to identify the best non-dominant solution among the other solutions. Furthermore, these outcomes include a notably low levelized cost of energy at 0.046147$/kWh, a robust index of reliability of 99.705%, and a significant reduction in CO₂ emissions amounting to 7.9142×10 3 tons/year, when considering the triple OFs. The paper’s methodology provides valuable insights for regions aiming to utilize renewable energy from untapped storage sources.

13 HYDRO ENERGY↗

A simple and fast preparation of neodymium-substituted nanocrystalline Mn{sub 2}O{sub 3}

Graphical abstract: Synthesis of Mn{sub 2−x}Nd{sub x}O{sub 3} with mixed morphology -- Abstract: Neodymium (Nd) ions were substituted for manganese in the crystal lattice of synthetic Mn{sub 2}O{sub 3}, via oxidation of Mn(NO{sub 3}){sub 2} in basic solution at room temperature. Doping of Nd into the lattice structure of Mn{sub 2}O{sub 3} has been reported for the first time, which resulted in materials with new composition, morphology and optical properties. The synthesized materials were characterized by XRD, SEM, TEM, HRTEM, XPS and TOF-SIMS. Light (2.6%) Nd doping resulted in a mixture of rods, plates and small sheets, while heavy (8.9%) Nd doping resulted in rods, large sheets and large single crystals. The effect of structural doping of Nd ions into Mn{sub 2}O{sub 3} resulted in a red shift in the absorbance.

36 MATERIALS SCIENCE↗

Determining the Solubility Behavior of Kogarkoite in Simulated Nuclear Waste

Kogarkoite (Na 3 FSO 4 ) is a sparingly soluble fluoride–sulfate double salt that has been identified in high level nuclear waste sludge at the Hanford Site and, more recently, in sludge batch compilation samples at the Savannah River Site (SRS). Due to its complex dissolution behavior, which exhibits an inverse dependence on sodium ion activity, the presence of this mineral poses significant challenges to waste retrieval and processing. Incomplete dissolution during sludge washing can lead to the retention of fluoride and sulfate in the high-level waste feed, potentially causing the formation of corrosive, immiscible molten salt layers, known as "glass gall,” in vitrification melters. Current efforts to optimize flowsheet parameters and wash-water volumes are hindered by the absence of a commercially available, certified reference material, which prevents the accurate calibration of analytical methods and the verification of dissolution kinetics. To address this critical gap, this research focuses on the laboratory synthesis of pure Kogarkoite to serve as a standard for comprehensive solubility and washing performance testing. A coupled synthesis and simulant campaign was executed using an evaporative crystallization protocol designed to replicate the dynamic concentration effects observed in tank farm operations. Thirteen simulant matrices were prepared by dissolving systematically varied ratios of sodium fluoride (NaF) and sodium sulfate (Na 2 SO 4 ) in deionized water under three distinct caustic regimes: 0.0 g (control), 4.0 g (~1 M), and 12.0 g (~3 M) sodium hydroxide (NaOH). While thermodynamic equilibrium models suggest that high-caustic environments should favor the stability of the double salt7, results from this evaporative study at 25 0 C revealed a distinct kinetic divergence. Simulants with high hydroxide loading predominantly yielded large, blocky crystals of sodium sulfate decahydrate (Na 2 SO 4 .10H 2 O). Successful synthesis of pure Kogarkoite was achieved exclusively in specific NaOH-free compositional windows, where the precipitate manifested as fine, opaque granular aggregates. Ion chromatography (IC) analysis confirmed phase purity through the simultaneous stoichiometric depletion of both fluoride and sulfate from the supernatant. This successful synthesis establishes a reproducible route to generate bulk Kogarkoite, enabling the subsequent phase of quantitative dissolution testing using inhibited water to optimize sludge-batch assembly.

Sarker, Md Sharif [Florida International Univ. (FI↗

Large-Scale Molecular Dynamics Simulations of Shock Induced Plasticity in Tantalum Single Crystals

We report on large-scale non-equilibrium molecular dynamics (NEMD) simulations of shock wave compression in Ta single crystals. The atomic interactions are modeled via a recently developed and optimized embedded-atom method (EAM) potential for Ta, which reproduces the equation of state up to 200 GPa. We examined the elastic-plastic transition and shock wave structure for wave propagation along the low index directions: (100), (110) and (Ill). Shock waves along (100) and (Ill) exhibit an elastic precursor followed by a plastic wave for particle velocities below 1.1 kmls for (100) and 1.4 km/s for (Ill). The nature of the plastic deformation along (lID) is dominated by twin ning for pressures above 41 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature effect on zinc oxysulfide-Zn(O,S) films synthesized by atomic layer deposition for Cu(In,Ga)Se{sub 2} solar cells

Thin films of Zn(O,S) were deposited by atomic layer deposition from diethylzinc, water (H{sub 2}O), and hydrogen sulfide (H{sub 2}S). First, a study on the influence of the H{sub 2}S/(H{sub 2}O+H{sub 2}S) pulse ratio from pure ZnO to pure ZnS was performed at deposition temperature T{sub dep}=120 and 200 °C. Zn(O,S) films had higher S content than expected, and this effect was stronger at T{sub dep}=200 °C. Then, Zn(O,S) films have been synthesized over the range of temperature 120–220 °C at the constant H{sub 2}S/(H{sub 2}O+H{sub 2}S) pulse ratio of 9%. For T{sub dep}<180 °C, high and almost constant S content has been measured in the films. The significant increase of the S/(O+S) atomic ratio for T{sub dep}>180 °C confirmed that exchange reactions occurred between the Zn(O,S) growing films and H{sub 2}S. The grazing incidence x-ray diffraction patterns showed Zn(O,S) films with hexagonal wurtzite structures and with an optimum crystallization for temperatures T{sub dep}=160–180 °C. Indeed, in this temperature range, well crystallized and large grains were obtained which was in good correlation with the film morphology determined by scanning electron microscope; and Hall effect measurements revealed low resistivities, high carrier concentrations (>10{sup 19} cm{sup −3}), and low mobilities. From these results, the authors propose the existence of a temperature range where the properties undergo significant changes while the atomic composition remains constant.

36 MATERIALS SCIENCE↗

Dust and Ions: Self Organization and Stability (Final Report)

This project explores the stability and structure of systems with non-reciprocal interactions, challenging the traditional understanding based on Newton's third law, which states that every action has an equal and opposite reaction. Reciprocal forces are fundamental to the stability of systems ranging in size from atomic nuclei to galactic clusters. Our research investigates what happens when the forces between two objects are not equal and opposite. We used dusty plasmas as a model system to study non-reciprocal interactions. In a plasma chamber, micron-sized dust particles acquire a negative charge and form 2D planar "dust crystals" when levitated by the electric field present in the plasma sheath at the interface between the plasma and the lower surface of the chamber. This electric field also drives a vertical ion flow, creating a positively charged "plasma wake" downstream of the dust grains. While horizontally aligned dust grains interact reciprocally, a slight vertical displacement causes non-reciprocal interactions due to the attraction of the lower dust grain to the upper dust grain’s ion wake. Our experiments investigated the range of plasma conditions (gas pressure and system power) where stable dusty plasma structures are able to self-organize, aided by the ion wake. We studied systems ranging from pairs of dust particles to large 2D crystals, providing insights into the conditions that lead to stable or unstable structures. We used numerical simulations to investigate how ion wakes changed in response to changes in the operating conditions as well as how the wakes of separate grains interact when dust grains are in close proximity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ba 2 Si 3 P 6 : 1D Nonlinear Optical Material with Thermal Barrier Chains

A novel barium silicon phosphide was synthesized and characterized. Ba 2 Si 3 P 6 crystallizes in the noncentrosymmetric space group Pna2 1 (No. 33) and exhibits a unique bonding connectivity in the Si–P polyanion not found in other compounds. The crystal structure is composed of SiP4 tetrahedra connected into one-dimensional double-tetrahedra chains through corner sharing, edge sharing, and covalent P–P bonds. Chains are surrounded by Ba cations to achieve an electron balance. The novel compound exhibits semiconducting properties with a calculated bandgap of 1.6 eV and experimental optical bandgap of 1.88 eV. The complex pseudo-one-dimensional structure manifests itself in the transport and optical properties of Ba 2 Si 3 P 6 , demonstrating ultralow thermal conductivity (0.56 W m –1 K –1 at 300 K), promising second harmonic generation signal (0.9 × AgGaS 2 ), as well as high laser damage threshold (1.6 × AgGaS 2 , 48.5 MW/cm 2 ) when compared to the benchmark material AgGaS 2 . Differential scanning calorimetry reveals that Ba 2 Si 3 P 6 melts congruently at 1373 K, suggesting that large single crystal growth may be possible.

36 MATERIALS SCIENCE↗

Not all moissanites are created equal: New constraints on moissanite from metamorphic rocks of Bulgaria

Here, terrestrial moissanite (SiC) is widely reported as an ultra-high pressure mineral occurring in kimberlites, diamonds and ultramafic/mafic rocks of mantle origin. However, the conditions of crystallization remain largely unknown. Moreover, dozens of SiC occurrences have been reported from continental crust sources such as granitoids, andesite–dacite volcanic rocks and their breccia, metasomatic and metamorphic rocks, and even limestones. The validity of many of these reports is still debated primarily due to possible contaminations from the widespread use of synthetic SiC abrasives in samples preparation. Indeed, reports of well-documented in-situ occurrences of moissanite in association with co-existing minerals are still scarce. The only condition of moissanite formation that is agreed upon is that extremely reducing media are required (e.g. 4.5–6 log units below the iron-wustite buffer). Here, we report the new occurrence of moissanite that was found in-situ within the garnet–staurolite–mica schists of Topolovgrad metamorphic group of Triassic age in Southern Bulgaria. The 10–300 μm moissanite crystals are situated within 0.1–1.2 mm isolated clusters, filled with amorphous carbon and nanocrystalline graphite. Most of moissanite crystals are 15R (rhombohedral) and 6H (hexagonal) polytypes, and one prismatic crystal, found within them, exhibits unusual concentric polytypical zoning with core (15R), intermediate zone (6H) and rim (3C-cubic). Experimental data show that this type of polytypical zonation is likely due to a decrease in temperature (or/and pressure?) and changes in Si/C ratio. Indeed, amphibolite facies metamorphism (500–580°C – garnet–staurolite zone) followed by a subsequent cooling during the retrograde stage of green schist facies metamorphism (~400–500°C) could have provided a change in temperature. The SiC containing clusters exhibit evidence that they are pre-metamorphic, and we hypothesize that their protolith was a “black shale” material likely rich in carbon, hydrocarbon and terrigenous silica. The latter served as a source of isolated chemically-reduced media, which is required for SiC formation. Other concepts to explain moissanite occurrences in metasedimentary rocks are also discussed. Importantly, our findings show that the formation conditions of moissanite are likely more variable than previously recognized.

15R-SiC↗

Layering, melting, and recrystallization of a close-packed micellar crystal under steady and large-amplitude oscillatory shear flows

The rheology and three-dimensional microstructure of a concentrated viscoelastic solution of the triblock copolymer poly(ethylene oxide){sub 106}-poly(propylene oxide){sub 68}-poly(ethylene oxide){sub 106} (Pluronic F127) in the protic ionic liquid ethylammonium nitrate are measured by small angle neutron scattering (SANS) under flow in three orthogonal planes. This solution's shear-thinning viscosity is due to the formation of two-dimensional hexagonal close-packed (HCP) sliding layer structure. Shear-melting of the crystalline structure is observed without disruption of the self-assembled micelles, resulting in a change in flow properties. Spatially resolved measurements in the 1–2 plane reveal that both shear-melting and sliding are not uniform across the Couette gap. Melting and recrystallization of the HCP layers occur cyclically during a single large amplitude oscillatory shear (LAOS) cycle, in agreement with the “stick-slip” flow mechanism proposed by Hamley et al. [Phys. Rev. E 58, 7620–7628 (1998)]. Analysis of 3D “structural” Lissajous curves show that the cyclic melting and sliding are direct functions of the strain rate amplitude and show perfect correlation with the cyclic stress response during LAOS. Both viscosity and structural order obey the Delaware–Rutgers rule. Combining rheology with in situ spatiotemporally resolved SANS is demonstrated to elucidate the structural origins of the nonlinear rheology of complex fluids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Substantial reduction of the anisotropy in the critical current densities J c of Ni-doped CaKFe 4 As 4 single crystals by chemical and irradiation-induced disorder

Here, we demonstrate that the anisotropy in the critical current densities, J c , of CaK(Fe 1–x Ni x ) 4 As 4 (x = 0, 0.015, 0.025, and 0.030) single crystals reduces with increasing chemical and irradiation-induced disorder. The magnetic field dependences of J c are analyzed by performing magnetization measurements with H applied parallel and perpendicular to the crystallographic c-axis. The results show that undoped crystals display large anisotropies in Jc due to an enhancement of the vortex pinning with H applied parallel to the crystallographic ab-planes. This anisotropy reduces substantially as Ni addition increases. Moreover, we found that random disorder introduced by proton irradiation enhances mainly the vortex pinning for H parallel to the c-axis. Consequently, using adequate fluencies, the vortex pinning at low temperatures in both undoped and doped samples becomes close to isotropic. These results make the CaKFe 4 As 4 system promising for applications that require isotropic J c under magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Goos-Haenchen shift in complex crystals

The Goos-Haenchen (GH) effect for wave scattering from complex PT-symmetric periodic potentials (complex crystals) is theoretically investigated, with specific reference to optical GH shift in photonic crystal slabs with a sinusoidal periodic modulation of both real and imaginary parts of the dielectric constant. The analysis highlights some distinct and rather unique features as compared to the GH shift found in ordinary crystals. In particular, as opposed to GH shift in ordinary crystals, which is large at the band gap edges, in complex crystals the GH shift can be large inside the reflection (amplification) band and becomes extremely large as the PT symmetry-breaking threshold is approached.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Automatic sample Dewar for MX beam-line

It is very common for crystals of large biological macromolecules to show considerable variation in quality of their diffraction. In order to increase the number of samples that are tested for diffraction quality before any full data collections at the ESRF*, an automatic sample Dewar has been implemented. Conception and performances of the Dewar are reported in this paper. The automatic sample Dewar has 240 samples capability with automatic loading/unloading ports. The storing Dewar is capable to work with robots and it can be integrated in a full automatic MX** beam-line. The samples are positioned in the front of the loading/unloading ports with and automatic rotating plate. A view port has been implemented for data matrix camera reading on each sample loaded in the Dewar. At last, the Dewar is insulated with polyurethane foam that keeps the liquid nitrogen consumption below 1.6 L/h. At last, the static insulation also makes vacuum equipment and maintenance unnecessary. This Dewar will be useful for increasing the number of samples tested in synchrotrons.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical properties of magnetic photonic crystals with an arbitrary magnetization orientation

We have studied the peculiarities of diffraction of light in magnetic photonic crystals at large values of magnetooptical activity parameter and modulation depth. We have considered the case of an arbitrary angle between the directions of the external static magnetic field and the normal to the layer. The problem has been solved by the modified Ambartsumyan layer summation method. It has been shown that the given system is nonreciprocal with respect to not only circular, but linear polarizations also. In this case, a new type of nonreciprocity is observed (namely, the relation R(α) ≠ R(–α) holds, where R is the reflection coefficient and α is the angle of incidence). It has been demonstrated that in the case of oblique incidence, there appears a new photonic forbidden band that is not selective relative to the polarization of incident light. We have detected strong dependences of reflectance, absorbance, transmittance nonreciprocity, and other characteristics on the angle between the direction of the external static magnetic field and the normal to the layer boundary. Such a system can be used as a controllable polarization filter and a mirror, as well as a source of circular (elliptic) polarization, a controllable optical diode, and so on.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High quality, giant crystalline-Ge stripes on insulating substrate by rapid-thermal-annealing of Sn-doped amorphous-Ge in solid-liquid coexisting region

Formation of large-grain (≥30 μm) Ge crystals on insulating substrates is strongly desired to achieve high-speed thin-film transistors. For this purpose, we propose the methods of Sn-doping into amorphous-Ge combined with rapid-thermal-annealing (RTA) in the solid-liquid coexisting temperature region for the Ge-Sn alloy system. The densities of micro-crystal-nuclei formed in this temperature region become low by tuning the RTA temperature close to the liquidus curve, which enhances the lateral growth of GeSn. Thanks to the very small segregation coefficient of Sn, almost all Sn atoms segregate toward edges of the stripes during growth. Agglomeration of GeSn degrades the surface morphologies; however, it is significantly improved by lowering the initial Sn concentration. As a result, pure Ge with large crystal grains (∼40 μm) with smooth surface are obtained by optimizing the initial Sn concentration as low as 3 ∼ 5%. Lateral growth lengths are further increased through decreasing the number of nuclei in stripes by narrowing stripe width. In this way, high-crystallinity giant Ge crystals (∼200 μm) are obtained for the stripe width of 3 μm. This “Si-seed free” technique for formation of large-grain pure Ge crystals is very useful to realize high-performance thin-film devices on insulator.

36 MATERIALS SCIENCE↗