SEARCH · Engineering Papers
Results for “Kinetic modeling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Uncertainty Quantification for a TNT Equation of State Including the Kinetic Burn Model
Explore the source record for details and available documents.
Toward a UV model of kinetic mixing and portal matter. III. Relating portal matter and right-handed neutrino masses
Not Available
Toward UV model of kinetic mixing and portal matter. IV. Quartification
Not Available
Fluid fuel point reactor kinetics equation modeling for MSR in MELCOR.
Abstract not provided.
Test verification of LOX/RP-1 high-pressure fuel/oxidizer-rich preburner designs
Two fuel-rich and two oxidizer-rich preburner injectors are tested with LOX/RP-1 in an investigation of performance, stability and gas temperature uniformity over a chamber pressure range from 1292 to 2540 psia. Fuel-rich mixture ratios range from 0.238 to 0.367 and oxidizer-rich mixture ratios range from 27 to 48, and carbon deposition data are collected by measuring the pressure drop across a turbine simulator flow device. The oxidizer-rich testing demonstrates the feasibility of oxidizer-rich preburners, indicating equilibrium combustion as predicted, and the measured fuel-rich gas composition and C-asterisk performance are in excellent agreement with kinetic model predictions indicating kinetically-limited combustion.
Development of a three-phrase combustion code for modeling liquid rocket engines
A two-dimensional/axisymmetric program for the simulation of three-phase reactive flows is presented. The three phases are: a multiple-species gaseous phase, a single-species liquid phase, and a particulate droplet phase. The liquid and gaseous phases are described with continuous Eulerian equations, while the droplets are described in a discrete Lagrangian fashion. The three phases are fully coupled together. An atomization model, a multireaction chemical kinetics model, and a subgrid scale turbulence model completes the description of a general liquid/gas bipropellant combustion process. The code development criteria and qualitative features are highlighted.
Analytical combustion/emissions research related to the NASA High-Speed Research Program
A combustion analysis program aimed at upgrading and applying advanced computer programs for gas turbine applications is discussed. 2D and 3D codes, KIVA-II and LeRC-3D, have been used to provide insight into the combustion process and combustor design. The computations performed through these codes show their capability to produce reasonable results, despite such deficiencies in the current models as accurate chemical kinetics modeling of hydrocarbon combustion and turbulence and turbulence combustion interaction modeling.
Physics of the Dayside Magnetosphere: New Results From a Hybrid Kinetic Code
We use a global hybrid code kinetic model to demonstrate how kinetic processes at the bow shock and within the foreshock can dramatically modify the solar wind just before its interaction with the magnetosphere. During periods of steady radial interplanetary magnetic field (IMF) orientation, the foreshock fills with a diffuse population of suprathermal ions. The ions generate cavities marked by enhanced temperatures, depressed densities, and diminished magnetic field strengths that convect antisunward into the bow shock with the solar wind flow. Tangential discontinuities marked by inward-pointing electric fields and normals transverse to the Sun-Earth line generate hot flow anomalies marked by hot tenuous plasmas bounded by outward propagating shocks. When the motional electric field in the magnetosheath points inward towards the Earth, a solitary bow shock appears. For typical IMF orientations, the solitary shocks should appear at poorly sampled high latitudes, but for strongly northward or southward IMF orientations the solitary shocks should appear on the flanks of the magnetosphere. Although quasi-perpendicular, solitary shocks should be marked by turbulent magnetosheath flows, often directed towards the Sun-Earth line, and abrupt spike-like enhancements in the density and magnetic field strength at the shock. Finally,we show how flux transfer events generated between parallel subsolar reconnection lines are destroyed upon encountering the magnetopause at latitudes above the cusp.
First Results of PIC Modeling of Kinetic Alfven Wave Dissipation
We present first results of an investigation of the kinetic damping of Alfven wave turbulence. The methodology is based on a fully electromagnetic, three-dimensional, particle in cell code. The calculation is initialized by an Alfven wave spectrum. Subsequently, a cascade develops, and damping by coupling to both ions and electrons is observed. We discuss results of these calculations, and present first estimates of damping rates and of the effects of energy transfer on ion and electron distributions. The results pertain to solar wind heating and acceleration.
CFD Based Design of a Filming Injector for N+3 Combustors
An effort was undertaken to perform CFD analysis of fluid flow in Lean-Direct Injection (LDI) combustors with axial swirl-venturi elements for next-generation LDI-3 combustor design. The National Combustion Code (NCC) was used to perform non-reacting and two-phase reacting flow computations for a newly-designed pre-filming type fuel injector LDI-3 injector, in a single-injector and a five-injector array configuration. All computations were performed with a consistent approach of mesh-optimization, spray-modeling, ignition and kinetics-modeling. Computational predictions of the aerodynamics of the single-injector were used to arrive at an optimized main-injector design that meets effective area and fuel-air mixing criteria. Emissions (EINOx) characteristics were predicted for a medium-power engine cycle condition, and will be compared with data when it is made available from experimental measurements. The use of a PDF-like turbulence-chemistry interaction model with NCC's Time-Filtered Navier-Stokes (TFNS) solver is shown to produce a significant impact on the CFD results, when compared with a laminar-chemistry TFNS approach for the five-injector computations.
CFD Evaluation of a 3rd Generation LDI Combustor
An effort was undertaken to perform CFD analysis of fluid flow in Lean-Direct Injection (LDI) combustors with axial swirl-venturi elements for next-generation LDI-3 combustor design. The National Combustion Code (NCC) was used to perform non-reacting and two-phase reacting flow computations for a nineteen-element injector array arranged in a three-module, 7-5-7 element configuration. All computations were performed with a consistent approach of mesh-optimization, spray-modeling, ignition and kinetics-modeling with the NCC. Computational predictions of the aerodynamics of the injector were used to arrive at an optimal injector design that meets effective area and fuel-air mixing criteria. LDI-3 emissions (EINOx, EICO and UHC) were compared with the previous generation LDI-2 combustor experimental data at representative engine cycle conditions.
Synthesis Modeling and Kinetics of Rationally Designed Defects and Substitutions in 2D Materials.
Abstract not provided.
Graphite Oxidation Modeling
Oxidation modeling importance ASME consideration Effect on graphite properties Model Overview Numerical Model Oxidation Diffusion Reaction Kinetics Model Parameterization Example problems Editing the model Simple problem example Conclusions Coupling to stress analysis Oxidation result analysis
Model free simulations of a high speed reacting mixing layer
The effects of compressibility, chemical reaction exothermicity and non-equilibrium chemical modeling in a combusting plane mixing layer were investigated by means of two-dimensional model free numerical simulations. It was shown that increased compressibility generally had a stabilizing effect, resulting in reduced mixing and chemical reaction conversion rate. The appearance of 'eddy shocklets' in the flow was observed at high convective Mach numbers. Reaction exothermicity was found to enhance mixing at the initial stages of the layer's growth, but had a stabilizing effect at later times. Calculations were performed for a constant rate chemical rate kinetics model and an Arrhenius type kinetics prototype. The Arrhenius model was found to cause a greater temperature increase due to reaction than the constant kinetics model. This had the same stabilizing effect as increasing the exothermicity of the reaction. Localized flame quenching was also observed when the Zeldovich number was relatively large.