Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “JUNCTION DIODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Observation of quantum oscillation of work function in ultrathin-metal/semiconductor junctions

Quantization in energy level due to confinement is generally observed for semiconductors. This property is used for various quantum devices, and it helps to improve the characteristics of conventional devices. Here, the authors have demonstrated the quantum size effects in ultrathin metal (Ni) layers sandwiched between two large band-gap materials. The metal work function is found to oscillate as a function of its thickness. The thermionic emission current bears the signature of the oscillating work function, which has a linear relationship with barrier heights. This methodology allows direct observation of quantum oscillations in metals at room temperature using a Schottky diode and electrical measurements using source-measure-units. The observed phenomena can provide additional mechanism to tune the barrier height of metal/semiconductor junctions, which are used for various electronic devices.

42 ENGINEERING↗

Characterization of electrically-active defects in ultraviolet light-emitting diodes with laser-based failure analysis techniques

Laser-based failure analysis techniques demonstrate the ability to quickly and non-intrusively screen deep ultraviolet light-emitting diodes (LEDs) for electrically-active defects. In particular, two laser-based techniques, light-induced voltage alteration and thermally-induced voltage alteration, generate applied voltage maps (AVMs) that provide information on electrically-active defect behavior including turn-on bias, density, and spatial location. Here, multiple commercial LEDs were examined and found to have dark defect signals in the AVM indicating a site of reduced resistance or leakage through the diode. The existence of the dark defect signals in the AVM correlates strongly with an increased forward-bias leakage current. This increased leakage is not present in devices without AVM signals. Transmission electron microscopy analysis of a dark defect signal site revealed a dislocation cluster through the pn junction. The cluster included an open core dislocation. Even though LEDs with few dark AVM defect signals did not correlate strongly with power loss, direct association between increased open core dislocation densities and reduced LED device performance has been presented elsewhere [M. W. Moseley et al., J. Appl. Phys. 117, 095301 (2015)].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Silicon Carbide Diodes Performance Characterization and Comparison With Silicon Devices

Commercially available silicon carbide (SiC) Schottky diodes from different manufacturers were electrically tested and characterized at room temperature. Performed electrical tests include steady state forward and reverse I-V curves, as well as switching transient tests performed with the diodes operating in a hard switch dc-to-dc buck converter. The same tests were performed in current state of the art silicon (Si) and gallium arsenide (GaAs) Schottky and pn junction devices for evaluation and comparison purposes. The SiC devices tested have a voltage rating of 200, 300, and 600 V. The comparison parameters are forward voltage drop at rated current, reverse current at rated voltage and peak reverse recovery currents in the dc to dc converter. Test results show that steady state characteristics of the tested SiC devices are not superior to the best available Si Schottky and ultra fast pn junction devices. Transient tests reveal that the tested SiC Schottky devices exhibit superior transient behavior. This is more evident at the 300 and 600 V rating where SiC Schottky devices showed drastically lower reverse recovery currents than Si ultra fast pn diodes of similar rating.

Lebron-Velilla, Ramon C.↗

Investigation into the Distribution of Built-in Electric Fields in LED Heterostructures with Multiple GaN/InGaN Quantum Wells by Electroreflectance Spectroscopy

Electric-field nonuniformity in the active region of a LED (light-emitting diode) heterostructure based on five identical GaN/InGaN quantum wells is investigated by the electroreflectance method. The energies of band-to-band transitions in the quantum wells and barriers are determined from the analysis of electroreflectance spectra using the Kramers–Kronig transforms. The procedure for estimating the electric-field strength in separate quantum wells of the active region by the position of spectral lines is proposed. It is found that the energies of the main transition in quantum wells of the active region with zero bias of the p–n junction differ by a magnitude on the order of 140 meV, which corresponds to a difference in the electric-field strengths of 0.78 MV/cm. It is shown that the nonuniformity of the electric field in the active region depends on the p–n junction bias.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrically injected near-infrared light emission from single InN nanowire p-i-n diode

We report on the achievement of electroluminescence emission of single InN p-i-n nanowire devices. InN p-i-n nanowire structures were grown directly on Si substrate by plasma-assisted molecular beam epitaxy and subsequently transferred to foreign substrate for the fabrication of single nanowire light emitting diodes. Electroluminescence emission with a peak energy of 0.71 eV (1.75 μm) was observed at 77 K. The measurement of near-bandgap electroluminescence provides unambiguous evidence for the achievement of p-type conduction of InN.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Experimental Demonstration of Charge-Balanced GaN Super-Heterojunction Schottky Barrier Diode Capable of 2.8 kV Switching

This letter reports an experimental demonstration of charge-balanced GaN super-heterojunction Schottky barrier diodes (SHJ-SBDs). Charge balance between the n-type delta-doping and the p-type doping was achieved by adjusting the thickness of the pGaN. Furthermore, this device structure enabled scaling of breakdown voltage to over 3 kV, and dynamic switching up to 2.8 kV without using any field-plate.

42 ENGINEERING↗

A theoretical analysis of steady-state photocurrents in simple silicon diodes.

A theoretical analysis solves for the steady-state photocurrents produced by a given photogeneration rate function with negligible recombination in simple silicon diodes, consisting of a uniformly doped quasi-neutral region (called "substrate" below) between a p-n junction depletion region (DR) and an ohmic contact (electrode). Special attention is given to conditions that produce "funneling" (a term used by the single-event-effects community) under steady-state conditions. Funneling occurs when carriers are generated so fast that the DR becomes flooded and partially or completely collapses. Some or nearly all of the applied voltage plus built-in potential normally across the DR is now across the substrate. This substrate voltage drop affects substrate currents. The steady-state problem can provide some qualitative insights into the more difficult transient problem. Chapter 6 discusses some similarities between the steady-state and transient problems...

Edmonds, Larry↗

A conductive scanning study of La{sub 0.67}Sr{sub 0.33}MnO{sub 3}/Nb:SrTiO{sub 3} hetero-junction

Basing on conductive atomic force microscopy, we presented a direct conductance mapping for the interface of the La{sub 0.67}Sr{sub 0.33}MnO{sub 3}/Nb:SrTiO{sub 3} hetero-junction. The most remarkable observation is the presence of an interfacial layer in Nb:SrTiO{sub 3} adjacent to the manganite film. Within this layer, the AFM tip/Nb:SrTiO{sub 3} contact shows a current-voltage dependence that strongly deviates from Shockley equation, unlike a Schottky diode. Spatial extension of this layer is explored and possible transport mechanism in or outside this interfacial layer is discussed. The present work gives a direct intuitional image on the interface of manganite junction. The principle proven here can be extended to other complex oxide interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

InP tunnel junction for InGaAs/InP tandem solar cells

Chemical beam epitaxy (CBE) has been shown to allow the growth of high quality materials with reproducible complex compositional and doping profiles. The main advantage of CBE compared to metalorganic chemical vapor deposition (MOCVD), the most popular technique for InP-based photovoltaic device fabrication, is the ability to grow high purity epilayers at much lower temperatures (450-530 C). We have previously shown that CBE is perfectly suited toward the fabrication of complex photovoltaic devices such as InP/InGaAs monolithically integrated tandem solar cells, because its low process temperature preserves the electrical characteristics of the InGaAs tunnel junction commonly used as an ohmic interconnect. In this work using CBE for the fabrication of optically transparent (with respect to the bottom cell) InP tunnel diodes is demonstrated. Epitaxial growth were performed in a Riber CBE 32 system using PH3 and TMIn as III and V precursors. Solid Be (p-type) and Si (n-type) have been used as doping sources, allowing doping levels up to 2 x 10(exp -19)/cu cm and 1 x 10(exp -19)/cu cm for n and p type respectively. The InP tunnel junction characteristics and the influence of the growth's conditions (temperature, growth rate) over its performance have been carefully investigated. InP p(++)/n(++) tunnel junction with peak current densities up to 1600 A/sq cm and maximum specific resistivities (V(sub p)/I(sub p) - peak voltage to peak current ratio) in the range of 10(exp -4) Omega-sq cm were obtained. The obtained peak current densities exceed the highest results previously reported for their lattice matched counterparts, In(0.53)Ga( 0.47)As and should allow the realization of improved minimal absorption losses in the interconnect InP/InGaAs tandem devices for Space applications. Owing to the low process temperature required for the top cell, these devices exhibit almost no degradation of its characteristics after the growth of subsequent thick InP layer suggesting minimal doping cross diffusion in the narrow space-charge region (approximately 1-5 nm) of the device. The fabrication of tandem devices using InP tunnel diodes as interconnect is in progress and will be reported at the conference.

Vilela, M. F.↗

Area-Efficient, 600V 4H-SiC JBS Diode-Integrated MOSFETs (JBSFETs) for Power Converter Applications

This article reports the demonstration of a low-voltage (<; 600V) monolithically integrated 4H-silicon carbide (SiC) MOSFET and JBS diode (JBSFET). A singlemetal and thermal treatment process were implemented to form ohmic contacts on the n+ and p+ source regions while forming the Schottky contact on the N- SiC epitaxial layer. Different layout methodologies are discussed for fabricating an energy-efficient low-voltage JBSFET by intermittently placing the JBS diode portion in the orthogonal direction to minimize the device area, hence improving the specific ON-resistance and reducing the overall chip size by 46%. A junction termination extension (JTE)-based edge termination structure (the Hybrid-JTE) was implemented to achieve a high breakdown voltage with a very low leakage current. In addition, it was investigated that the forward characteristic of the JBSFET can be further improved by adopting Ti-based metal as the Schottky contact for the JBS diode. Device design, layout approach, fabrication, electrical characterization, and future prospects of the 4H-SiC JBSFETs are discussed in this article.

42 ENGINEERING↗

Spin-torque diode spectrum of ferromagnetically coupled (FeB/CoFe)/Ru/(CoFe/FeB) synthetic free layer

We investigated systematically the spin torque diode spectrum of a ferromagnetically coupled (FeB/CoFe)/Ru/(CoFe/FeB) synthetic free layer in an MgO-based magnetic tunnel junction. In the spectra, we observed single peaks shifted to higher frequency with increasing the in-plane magnetic fields, as expected from the ferromagnetic resonance of the FeB/CoFe adjacent to the MgO tunnel barrier. On the other hand, under the perpendicular fields, we observed several peaks below 6 GHz and around 10 GHz, which were rather insensitive to the field. These behaviors are different from our simple calculation taking account the interlayer coupling, suggesting that the excitation of magnetizations occurs in a complicated manner for the synthetic free layers.

36 MATERIALS SCIENCE↗

Thin-layer black phosphorous/GaAs heterojunction p-n diodes

Owing to its high carrier mobility and thickness-tunable direct band gap, black phosphorous emerges as a promising component of optoelectronic devices. Here, we evaluate the device characteristics of p-n heterojunction diodes wherein thin black phosphorous layers are interfaced with an underlying, highly n-doped GaAs substrate. The p-n heterojunctions exhibit close-to-ideal diode behavior at low bias, while under illumination they display a photoresponse that is evenly distributed over the entire junction area, with an external quantum efficiency of up to 10% at zero bias. Moreover, the observed maximum open circuit voltage of 0.6 V is consistent with the band gap estimated for a black phosphorous sheet with a thickness on the order of 10 nm. Further analysis reveals that the device performance is limited by the structural quality of the black phosphorous surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fabrication and characterization of 6,13-bis(triisopropylsilylethynyl)-pentacene active semiconductor thin films prepared by flow-coating method

Investigation on the physical characterization and comparison of organic thin film based on a soluble 6,13-bis(triisopropylsilylethynyl) (TIPS) pentacene is reported. Oriented thin-films of pentacene have been successfully deposited by flow-coating method, in which the chloroform solution is sandwiched between a transparent substrate and a slide glass, followed by slow-drawing of the substrate with respect to the slide glass. Molecular orientation of flow-coated TIPS-pentacene is comparable to that of the thermal-evaporated pentacene thin film by the X-ray diffraction (XRD) results. XRD results showed that the morphology of flow-coated soluble pentacene is similar to that of the thermal-evaporated pentacene thin films in series of (00l) diffraction peaks where the (001) diffraction peaks are strongest in the nominally out-of-plane intensity and interplanar spacing located at approximately 2θ = 5.33° (d-spacing, d{sub 001} = 16 Å). Following that, ITO/p-TIPS-pentacene/n-ZnO/Au vertical diode was fabricated. The diode exhibited almost linear characteristics at low voltage with nonlinear characteristics at higher voltage which similar to a pn junction behavior. The results indicated that the TIPS-pentacene semiconductor active thin films can be used as a hole injection layer for fabrication of a vertical organic transistor.

36 MATERIALS SCIENCE↗

Ion implanted photodiode detectors in epitaxial /Ga/x/In/1-x//As

Ion implanted p-n junction photodiodes in epitaxially grown (Ga(x)In(1-x))As material are reported on here. Photoresponse in these diodes was investigated for approximately the entire composition range of x between zero and one. High values for quantum efficiency were obtained for the devices with a high value of x.

Ajmera, P. K.↗

Solar Array System Combined Environmental Effects Tests: Gateway Power and Propulsion Element

The NASA Lunar Orbital Platform-Gateway (LOP-G), a vital component of NASA’s Artemis program, will serve as a multi-purpose outpost orbiting the Moon. A foundational component of LOP-G is the Power and Propulsion Element (PPE). The PPE is a high-power, +60-kilowatt solar electric propulsion spacecraft that will provide power, high-rate communications, attitude control, and orbital transfer capabilities for the Gateway. The solar array system will utilize 4-junction photovoltaic cell technology on a flexible substrate (roll-out solar array or ROSA) in combination with multiple diode assemblies to combine the power of the solar array strings. NASA’s Marshall Space Flight Center, together with the PPE developer, Maxar, are in the midst of completing a rigorous combined environments test campaign of 3 solar array coupons and 1 array blocking diode board coupon. The campaign includes Ultra-Violet Radiation, Charged Particle Radiation, Ion Erosion, Thermal Cycles, and Electrostatic Discharge tests. The environments are applied in 3 separate incremental stages reflecting the various mission phases: 460 days of Earth-to-Lunar Transit, with much of that time through the Van Allen Belts, 5-years in Lunar Near-Rectilinear Halo Orbit (NRHO) at the Moon, and finally 15-years in Lunar NRHO, which represents the end of the design life. This paper will report on the state of the testing for each coupon, and brief look at the array performance, including some unexpected sensitivities of array blocking diodes.

Gateway↗

Reverse-bias-driven dichromatic electroluminescence of n-ZnO wire arrays/p-GaN film heterojunction light-emitting diodes

Position-controlled n-ZnO microwire (MW) and nanowire-bundle (NW-B) arrays were fabricated using hydrothermal growth of ZnO on a patterned p-GaN film. Both the wire/film p–n heterojunctions showed electrical rectification features at reverse-bias (rb) voltages, analogous to backward diodes. Dichromatic electroluminescence (EL) emissions with 445- and 560-nm-wavelength peaks displayed whitish-blue and greenish-yellow light from MW- and NW-B-based heterojunctions at rb voltages, respectively. The different dichromatic EL emission colors were studied based on photoluminescence spectra and the dichromatic EL peak intensity ratios as a function of the rb voltage. The different EL colors are discussed with respect to depletion thickness and electron tunneling probability determined by wire/film junction geometry and size.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular beam epitaxial growth and optical properties of red-emitting ({lambda} = 650 nm) InGaN/GaN disks-in-nanowires on silicon

We have investigated the radiative properties of InGaN disks in GaN nanowires grown by plasma enhanced molecular beam epitaxy on (001) silicon substrates. The growth of the nanowire heterostructures has been optimized to maximize the radiative efficiency, or internal quantum efficiency (IQE), for photoluminescence emission at {lambda} = 650 nm. It is found that the IQE increases significantly (by {approx}10%) to 52%, when post-growth passivation of nanowire surface with silicon nitride or parylene is applied. The increase in efficiency is supported by radiative- and nonradiative lifetimes derived from data obtained from temperature dependent- and time-resolved photoluminescence measurements. Light emitting diodes with p-i-n disk-in-nanowire heterostructures passivated with parylene have been fabricated and characterized.

36 MATERIALS SCIENCE↗

High-field electroluminescence in semiconductor tunnel junctions with a Mn-doped GaAs layer

We investigated high-field electroluminescence (EL) in semiconductor tunnel junctions with a Mn-doped GaAs layer (here, referred to as GaAs:Mn). Besides the band-gap emission of GaAs, the EL spectra show visible light emissions with two peaks at 1.94 eV and 2.19 eV, which are caused by d-d transitions of the Mn atoms excited by hot electrons. The threshold voltages for band-gap and visible light EL in the tunnel junctions with a GaAs:Mn electrode are 1.3 V higher than those of GaAs:Mn excited by hot holes in reserve biased p⁺-n junctions, which is consistent with the hot carrier transport in the band profiles of these structures. Our EL results at room temperature show that the electron temperature in GaAs:Mn can be as high as ~700 K for a low input electrical power density of 0.4 W/cm², while the lattice temperature of the GaAs:Mn layer can be kept at 340 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗