Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “In Space Manufacturing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

What would it take to manufacture perovskite solar cells in space?

Imagine, astronauts land on the moon. They verify their arrival with mission control, and perform system checks and validations. After the dust settles, they open the airlock of the landing vehicle and venture outside. A side hatch opens, and a flexible substrate slowly unfurls on a boom. A series of printer heads raster, hovering over the substrate and sequentially vapor-depositing the constituent layers of a perovskite solar module (Figure 1). In time, a 1-megawatt array has been manufactured on the moon and can now be connected to supply power to the Artemis Base Camp. This ambitious vision could someday become a reality. On August 29, 2021, a SpaceX Falcon 9 rocket launched a commercial resupply payload from Kennedy Space Center en route to the International Space Station (ISS). On board were perovskite solar cells that will fly for 6 months outside the ISS in low earth orbit (LEO) on the 15th Materials International Space Station Experiment (MISSE-15). This will be the first long duration flight of perovskite solar cell devices in LEO and a major step toward realizing the in-space operation and, potentially, manufacture of perovskite solar cells.

Lyndsey McMillon-Brown↗

Jewelry Design

A jeweler's torch generates temperatures of 1,400 - 1,800 degrees. Asbestos blocks were used as soldering bases but they were disintegrating at high temperatures. Space Shuttle tiles, manufactured by Lockheed Missiles & Space Co., offered a base with temperature resistance far beyond his requirements.

Source record↗

The challenges of manufacturing graphite-epoxy structural columns for space platforms

A description is given of the manufacturing processes developed for large-quantity production of space structure graphite/epoxy composite tubes. The tubes are to be delivered to orbit by the Space Shuttle and assembled by astronaut-assisted assembly machines. The tooling and manufacturing system uses a novel method of dry fiber placement which carefully controls fiber position and orientation and a non-autoclave cure for the epoxy resin. The means of dimensional tolerance control over differential thermal expansion between metal tooling and graphite tubes, resin shrinkage during cure, hot pressurized resins in close tolerance tooling, and tool wear, are examined in detail. A successful pilot production program is also reported.

Vaughn, R. L.↗

Maturation of In-space Welding in Reduced Gravity and Reduced Pressure Environments Through Progression to Suborbital Flight Experiments

Development of in-space welding (ISW) is a key and enabling manufacturing technology as welding is currently involved in producing approximately 90% of durable goods, and this trend is expected to hold for in-space manufacturing as well. ISW is critical to a sustainable space economy. To mature in-space welding, numerous gaps must be closed since NASA has not made a weld in space in 50 years. Advancing laser beam welding (LBW) towards a suborbital flight demonstration will help mature the process for in-space assembly & manufacturing (ISAM) through demonstration in relevant environments and achieving technology readiness milestones. LBW technologies and science improved by this work will benefit in-space manufacturing, long-term sustainability of space structures & operations, and the overall space economy. Ground-based welding of aerospace hardware requires an Edisonian approach to qualify a welding process; however, this approach is infeasible for ISW qualification due to mass, volume, logistic, and cost challenges inherent to the space environment. To address this challenge, we are conducting ground and suborbital tests with partners performing parabolic flights to gather data on LBW processes and infuse them into NASA & partner missions. This progression from ground to flight experiments will elucidate relevant physics during LBW: 1) reduced gravity, 2) reduced pressure, and 3) extreme temperature. Data from post-flight evaluation and in situ instrumentation will feed integrated computational materials engineering (ICME) tools to reduce the burden of ISW infusion by establishing a link between space and terrestrial environments, ultimately accelerating the qualification of LBW in space.

in-space welding↗

Methyl Chloroform Elimination from the Production of Space Shuttle Sold Rocket Motors

Thiokol Space Operations manufactures the Reusable Solid Rocket Motors used to launch America's fleet of Space Shuttles. In 1989, Thiokol used more than 1.4 Mlb of methyl chloroform to produce rocket motors. The ban placed by the Environmental Protection Agency on the sale of methyl chloroform had a significant effect on future Reusable Solid Rocket Motor production. As a result, changes in the materials and processes became necessary. A multiphased plan was established by Thiokol in partnership with NASA's Marshall Space Flight Center to eliminate the use of methyl chloroform in the Reusable Solid Rocket Motor production process. Because of the extensive scope of this effort, the plan was phased to target the elimination of the majority of methyl chloroform use (90 percent) by January 1, 1996, the 3 Environmental Protection Agency deadline. Referred to as Phase I, this effort includes the elimination of two large vapor degreasers, grease diluent processes, and propellant tooling handcleaning using methyl chloroform. Meanwhile, a request was made for an essential use exemption to allow the continued use of the remaining 10 percent of methyl chloroform after the 1996 deadline, while total elimination was pursued for this final, critical phase (Phase II). This paper provides an update to three previous presentations prepared for the 1993, 1994, and 1995 CFC/Halon Alternative Conferences, and will outline the overall Ozone Depleting Compounds Elimination Program from the initial phases through the final testing and implementation phases, including facility and equipment development. Processes and materials to be discussed include low-pressure aqueous wash systems, high-pressure water blast systems- environmental shipping containers, aqueous and semi-aqueous cleaning solutions, and bond integrity and inspection criteria. Progress toward completion of facility implementation and lessons learned during the scope of the program, as well as the current development efforts and basic requirements of future methyl chloroform handcleaning elimination, will also be outlined.

Golde, Rick P.↗

In-Space Recycler Technology Demonstration

In 2014, a 3D printer was installed and used successfully on the International Space Station (ISS), creating the first additively manufactured part in space. While additive manufacturing is a game changing technology for exploration missions, the process still requires raw feedstock material to fabricate parts. Without a recycling capability, a large supply of feedstock would need to be stored onboard, which negates the logistical benefits of these capabilities. Tethers Unlimited, Inc. (TUI), received a Small Business Innovation Research (SBIR) award to design and build the first In-space Recycler for demonstration aboard the ISS in 2017. To fully test this technology in microgravity, parts will be 3D printed, recycled into reusable filament, and then reprinted into new parts. Recycling scrap into printer filament is quite challenging in that a recycler must be able to handle a large variety of possible scrap configurations and densities. New challenges include: dealing with inevitable contamination of the scrap material, minimizing damage to the molecular structure of the plastic during reprocessing, managing a larger volume of hot liquid plastic, and exercising greater control over the cooling/resolidification of the material. TUI has developed an architecture that addresses these challenges by combining standard, proven technologies with novel, patented processes developed through this effort. Results show that the filament diameter achieved is more consistent than commercial filament, with only minimal degradation of material properties over recycling steps. In May 2016, TUI completed fabrication of a flight prototype, which will ultimately progress to the demonstration unit for the ISS as a testbed for future exploration missions. This capability will provide significant cost savings by reducing the launch mass and volume required for printer feedstock as well as reduce waste that must be stored or disposed.

Recycling↗

NASA's Space Launch System Progress Report

Exploration beyond Earth will be an enduring legacy for future generations, confirming America's commitment to explore, learn, and progress. NASA's Space Launch System (SLS) Program, managed at the Marshall Space Flight Center, is responsible for designing and developing the first exploration-class rocket since the Apollo Program's Saturn V that sent Americans to the Moon. The SLS offers a flexible design that may be configured for the MultiPurpose Crew Vehicle and associated equipment, or may be outfitted with a payload fairing that will accommodate flagship science instruments and a variety of high-priority experiments. Both options support a national capability that will pay dividends for future generations. Building on legacy systems, facilities, and expertise, the SLS will have an initial lift capability of 70 metric tons (mT) and will be evolvable to 130 mT. While commercial launch vehicle providers service the International Space Station market, this capability will surpass all vehicles, past and present, providing the means to do entirely new missions, such as human exploration of asteroids and Mars. With its superior lift capability, the SLS can expand the interplanetary highway to many possible destinations, conducting revolutionary missions that will change the way we view ourselves, our planet and its place in the cosmos. To perform missions such as these, the SLS will be the largest launch vehicle ever built. It is being designed for safety and affordability - to sustain our journey into the space age. Current plans include launching the first flight, without crew, later this decade, with crewed flights beginning early next decade. Development work now in progress is based on heritage space systems and working knowledge, allowing for a relatively quick start and for maturing the SLS rocket as future technologies become available. Together, NASA and the U.S. aerospace industry are partnering to develop this one-of-a-kind asset. Many of NASA's space centers across the country will provide their unique expertise to the Space Launch System endeavor. Unique infrastructure to be used includes the Michoud Assembly Facility for tank manufacturing, Stennis Space Center for engine testing, and Kennedy Space Center for processing and launch. As this panel will discuss, the SLS team is dedicated to doing things differently-from applying lean oversight/insight models to smartly using legacy hardware and existing facilities. Building on the foundation laid by over 50 years of human and scientific space flight--and on the lessons learned from the Apollo, Space Shuttle, and Constellation Programs-the SLS team has delivered both technical trade studies and business case analyses to ensure that the SLS architecture will be safe, affordable, reliable, and sustainable.

Singer, Joan A.↗

Space processing of chalcogenide glasses

Manufacture of chalcogenide glasses in space will eliminate many of the causes of optical non-homogeneity and contamination that are inherent in earth-bound manufacture. A program is outlined to demonstrate the feasibility of various techniques and processes that will be utilized to manufacture chalcogenide glasses in space. Amorphous character, purity, and homogeneity parameters are being investigated at various stages of the glass forming process. These parameters in merit index form will serve to provide guidelines for the design of the actual melting experiment in space, and for the optimization of the exact chalcogenide composition to be included in the space experiments.

Larsen, D. C.↗

XRCF Testing Capabilities

The Space Optics Manufacturing Technology Center's X-ray Calibration Facility has been recently modified to test Next Generation Space Telescope (NGST) developmental mirrors at cryogenic temperatures (35 degrees Kelvin) while maintaining capability for performance testing of x-ray optics and detectors. The facility's current cryo-optical testing capability and potential modifications for future support of NGST will be presented.

Reily, Cary↗

Processing materials in space - The history and the future

The development of materials processing in space, and some of the Soyuz, Apollo, Skylab, and Shuttle orbital materials experiments are reviewed. Consideration is given to protein crystal growth, electrophoresis, low-gravity isoelectric focusing, phase partitioning, a monodisperse latex reactor, semiconductor crystal growth, solution crystal growth, the triglycine sulfate experiment, vapor crystal growth experiments, the mercuric iodide experiment, electronic and electrooptical materials, organic thin films and crystalline solids, deep undercooling of metals and alloys, magnetic materials, immiscible materials, metal solidification research, reluctant glass-forming materials, and containerless glass formation. The space processing apparatuses and ground facilities, for materials processing are described. Future facilities for commercial research, development, and manufacturing in space are proposed.

Chassay, Roger↗

Research study on materials processing in space experiment M512

A study program was conducted to clarify the role of gravity in the fluid mechanics of certain molten metal processes of potential significance to manufacturing in space. In particular, analyses were conducted of the M551 Metals Melting Experiment and the M553 Sphere Forming Experiment to be conducted in the M512 Facility onboard Skylab. The M551 experiment consisted of a study of electron beam welding of various metals, and the M553 experiment studied the formation of molten metal spheres by free-floating in a near zero-gravity environment. The analyses of these experiments and a comparison with ground-based and KC135 experimental results are presented.

Brashears, M. R.↗

Research study on materials processing in space experiment M512

A study program was conducted to clarify the role of gravity in the fluid mechanics of certain molten metal processes of potential significance to manufacturing in space. In particular, analyses were conducted of the M551 Metals Melting Experiment and the M553 Sphere Forming Experiment to be conducted in the M512 Facility onboard Skylab. The M551 experiment consisted of a study of electron beam welding of various metals, and the M553 experiment studied the formation of molten metal spheres by free-floating in a near zero-gravity environment. The analyses of these experiments and a comparison with ground-based and KC135 experimental results are presented.

Brashears, M. R.↗

Prospective space developments - Blue sky and non-blue sky.

Discussion of the significance for man's future of the practical benefits to be yielded by developments successfully concluded or still in progress over the wide range of technologies involved in current and future space activities. Reviewed benefit potentials pertain to space-age communications, transportation, computer developments, information networks, education, home communications centers, holography, life-support systems, power systems, manufacturing in space, meteorology, and earth resources. A strong case is made for the indissoluble involvement of this nation's self-interest in the achievement of national space goals.

Von Braun, W.↗