Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPLEMENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A Moving-Wave Implementation in WRF to Study the Impact of Surface Water Waves on the Atmospheric Boundary Layer

Abstract While numerous modeling studies have focused on the interaction of ocean surface waves with the atmospheric boundary layer, most employ idealized waves that are either monochromatic or synthetically generated from a theoretical wave spectrum, and the atmospheric solvers are typically incompressible. To study wind–wave coupling in real-world scenarios, a model that can simulate both realistic meteorological and wave conditions is necessary. In this paper we describe the implementation of a moving bottom boundary condition into the Weather Research and Forecasting Model for large-eddy simulation applications. We first describe the moving bottom boundary conditions within WRF’s pressure-based vertical coordinate system. We then validate our code with idealized test cases that have analytical solutions, including flow over a monochromatic wave with and without viscosity. Finally, we present results from turbulent flows over a moving monochromatic wave with different wave ages, and demonstrate satisfactory agreement of the wave growth rate with results from the literature. We also compare atmospheric stress and wind parameters from two physically equivalent cases. The first specifies a wind moving in the same direction as a propagating wave, while the second involves a stationary wave with the wind adjusted such that the wind relative to the wave is the same as in the first case. Results indicate that the velocity and Reynolds stress profiles for the two cases match, further validating the moving bottom implementation.

17 WIND ENERGY↗
DOE OSTI2021

Reproductive intentions among HIV-negative gay and bisexual men initiating pre-exposure prophylaxis in the Sustainable Health Center Implementation pre-exposure prophylaxis pilot study, 2014–2016

Introduction We assessed reproductive intentions and associated characteristics among men enrolled in the Sustainable Health Center Implementation pre-exposure prophylaxis (PrEP) Pilot (SHIPP) Study. Methods We analyzed baseline data from 1275 men who self-identified as gay or bisexual and participated in the SHIPP study. SHIPP was a cohort study of PrEP implementation in five community health centers in Chicago, Jackson, Philadelphia, and Washington, D.C. conducted from 2014 to 2016. Participants completed audio computer-assisted self-interviews querying intentions to have a child in the future. We estimated the association between participants’ reproductive intentions and their characteristics using Poisson regression models. Results Approximately 47% of participants indicated their intentions to have a child. Black/non-Hispanic (aPR = 1.40; 95% CI: 1.10–1.78) and other/non-Hispanic participants (aPR = 1.40; 95% CI: 1.01–1.93) were more likely to report intentions to have a child than white/non-Hispanic participants. Participants were less likely to report intentions to have children as age increased (18–29 years, reference group; 30–39 years, aPR = 0.80, 95% CI: 0.64–0.99; 40–49 years, aPR = 0.49, 95% CI: 0.33–0.72; 50+ years, aPR = 0.07, 95% CI: 0.02–0.21). Conclusions Clinicians offering PrEP to black and other/non-Hispanic gay and bisexual men should assess their reproductive intentions as family-planning counseling may be an opportunity to introduce PrEP to HIV-negative gay and bisexual men.

Immunology↗
DOE OSTI2021

A survey of software implementations used by application codes in the Exascale Computing Project

The US Department of Energy Office of Science and the National Nuclear Security Administration initiated the Exascale Computing Project (ECP) in 2016 to prepare mission-relevant applications and scientific software for the delivery of the exascale computers starting in 2023. The ECP currently supports 24 efforts directed at specific applications and six supporting co-design projects. These 24 application projects contain 62 application codes that are implemented in three high-level languages—C, C++, and Fortran—and use 22 combinations of graphical processing unit programming models. The most common implementation language is C++, which is used in 53 different application codes. The most common programming models across ECP applications are CUDA and Kokkos, which are employed in 15 and 14 applications, respectively. This article provides a survey of the programming languages and models used in the ECP applications codebase that will be used to achieve performance on the future exascale hardware platforms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Implementation of Creep-Damage Model for Concrete Fracture in MOOSE

Numerical implementation of an isotropic creep-damage model for concrete in multiphysics object-oriented simulation environment (MOOSE) finite element framework is presented in this paper. The constitutive model considers the combined effect of instantaneous and delayed strains on damage propagation. The implementation considers creep using generalized Maxwell or Kelvin-Voigt models. Using strain splitting assumptions, the total mechanical strains are split into elastic and creep components. Damage is considered to evolve as a function of the elastic and creep strains. This work considers damage as a function of fracture energy using the characteristic length of each finite element. This approach preserves the energy release rate of each element and avoids vanishing energy dissipation as the mesh is refined. Further, a creep-damage parameter is used to quantify the effect of creep strain on damage. The model is tested against published results on notched three-point bending specimens involving non-linear creep and predicts that about a third of the creep strain contributes towards damage for the experiments simulated. Results show that the proposed framework has predictive capabilities, and the model can be extended for more complex systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Utah FORGE 7-3639: Design and Implementation of a Novel Multi-Frac Stimulation Concept - 2024 Annual Workshop Presentation

This is a presentation on the Design and Implementation of a Novel Multi-Frac Stimulation Concept by The University of Oklahoma, presented by Ahmad Ghassemi. This slide presentation video discusses the design and implementation of a reservoir stimulation concept improving near-wellbore and well-to-well conductivity while enhancing the SRV and promoting self-propping and heat exchange. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 13-15, 2024.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

SmoQyDQMC.jl: A flexible implementation of determinant quantum Monte Carlo for Hubbard and electron-phonon interactions

We introduce the SmoQyDQMC.jl package, a Julia implementation of the determinant quantum Monte Carlo algorithm. SmoQyDQMC.jl supports generalized tight-binding Hamiltonians with on-site Hubbard and generalized electron-phonon ( e e -ph) interactions, including non-linear e e -ph coupling and anharmonic lattice potentials. Our implementation uses hybrid Monte Carlo methods with exact forces for sampling the phonon fields, enabling efficient simulation of low-energy phonon branches, including acoustic phonons. The SmoQyDQMC.jl package also uses a flexible scripting interface, allowing users to adapt it to different workflows and interface with other software packages in the Julia ecosystem. The code for this package can be downloaded from our GitHub repository at https://github.com/SmoQySuite/SmoQyDQMC.jl or installed using the Julia package manager. The online documentation, including examples, can be obtained from our document page at https://smoqysuite.github.io/SmoQyDQMC.jl/stable/.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

The Opus radiative opacity code, a new implementation of the super-transition array method

This report describes the development of our new radiative opacity code Opus, submitted as part of a 2020 Level 2 milestone requirement. This code aims to incorporate the capabilities in existing but separate opacity codes previously developed at LLNL (Opal, Topaz, and Tycho). The first phase in the development, which was to implement the super-transition (STA) method of Bar-Shalom and co-workers is now completed. In this work, we describe the underlying physics, implementation, usage, and regression testing as well as providing numerical examples for the opacity tables of boron, chromium, iron, and nickel. The latter are benchmarked against the LLNL legacy STA code Tycho, with an average absolute relative difference of ~1.5 and 0.5% for Planck and Rosseland opacity means, respectively. The cases where differences are larger are well understood in terms of numerical instabilities near discontinuities of the average degree of ionization inherent to the assumed opacity/equation-of-state model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

A Handbook for Designing, Implementing, and Evaluating Successful Electric Utility Pilots

Since at least the late 1970s, electric utilities and their regulators have recognized the value of experimentation to motivate innovation. The industry has a long history of using pilots to help inform future decision making about electric utility rates, customer technology adoption and integration, and even changes to the utility’s regulatory or business model. Although utility pilots have become almost ubiquitous proving grounds for new rates, technologies, and alterations to the traditional utility regulatory and business model, some regulators are beginning to raise questions about what constitutes a “good” pilot. Much has been written about utility pilots over the years; however, what is missing from the literature is the identification of a comprehensive process for not only designing and evaluating a pilot, but also implementing, successful utility pilots that provide actionable outcomes upon which more informed decisions can be made. This report provides a step-by-step process that regulators, policymakers, and utilities can follow to help promote a more successful pilot, even if whatever is being tested fails to produce the intended or expected result(s). It is worth noting that this report is not intended to serve as a technical resource for those designing, implementing, and evaluating pilots. However, there are myriad references provided for those wishing to delve deeper into the technical details.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Practices Implemented by DOE Better Plants Program Partners to Mitigate COVID-19

Screening for symptoms, maintaining physical distance, sanitizing surfaces, wearing appropriate face masks, maintaining good personal hygiene, and reconfiguring HVAC air management are the major activities that the DOE BP partners have implemented to mitigate COVID-19. This article shares some specific practices that BP program partners have implemented for these activities. The energy impact of some practices has also been discussed and some rules of thumb have been provided to estimate energy penalties.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Fossil Power Plant Cyber Security Life-Cycle Risk Reduction, A Practical Framework for Implementation

Market conditions are forcing fossil electricity generation facility owners and operators to implement advanced digital technologies. These technologies enable efficiencies, operational flexibility, operations and maintenance efficiencies, and adapting to a transitioning workforce. These digital technologies, however, can increase the cybersecurity attack surface. The purpose of this research was to develop a holistic cybersecurity risk reduction framework for fossil generation facilities. The framework begins with assessing how cyber risk changes across facility life cycles, including plant, system, vendor, and business life cycles. The next phase performs consequence analysis to prioritize high consequence events. Focusing on high consequence events allows owners to use a graded, risk-informed approach to prioritize cybersecurity efforts. The final phase identifies the digital asset attack surface in sensors and instrumentation and control equipment. After the vulnerabilities are identified, the owner selects mitigating cybersecurity control measures (or countermeasures) based on the risk analysis from the previous phases. This report describes the current industry cybersecurity best practices in fossil generation that are based on the first principles for cybersecurity engineering. The report is divided into five sections that describe the implementation of the risk reduction framework and present identified research, methodological, and technology gaps that were identified through this course of research and development.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Selecting and Implementing Resilience Metrics in Existing Energy Sector Models [Slides]

Resilience is a topic receiving much attention in relation to energy systems, with particular attention being paid to the supply of electricity. As a result of the growing interest in energy sector resilience, research communities have proposed a plethora of candidate resilience indicators and metrics, most of which remain immature at different scales and segments within the energy system. A necessary focus of the research community lies in implementing, testing, and validating resilience metrics and analysis approaches in energy sector models, which will be invaluable for informing resilience planning and investment decisions. Recognizing these challenges that need to be addressed, we explore how to effectively integrate resilience considerations into energy sector models and tools. The overarching goal of the effort was to evaluate the data needs, methodologies, and outcomes - including consequences and/or changes in investment or operational decisions due to avoided consequences - based on resilience analysis in a range of existing tools. In particular, we selected five models originally built at NREL to explore non-resilience energy research questions to implement and exercise resilience metrics and analysis approaches. To demonstrate the importance of perspective, we selected models that represent different segments of the energy sector, geographic scales, and modeling approaches. A second important aspect of our effort was the development of generalized power interruption scenarios. These scenarios were intended to help establish a framework for simulating the effects of real-world threats in terms of their impacts on system components and, in turn, power interruption.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Performant implementation of the atomic cluster expansion

The atomic cluster expansion is a general polynomial expansion of the atomic energy in multi-atom basis functions. Here we implement the atomic cluster expansion in the performant C++ code PACE that is suitable for use in large scale atomistic simulations. We briefly review the atomic cluster expansion and give detailed expressions for energies and forces as well as efficient algorithms for their evaluation. We demonstrate that the atomic cluster expansion as implemented in PACE shifts a previously established Pareto front for machine learning interatomic potentials towards faster and more accurate calculations. Moreover, general purpose parameterizations are presented for copper and silicon and evaluated in detail. We show that the new Cu and Si potentials significantly improve on the best available potentials for highly accurate large-scale atomistic simulations.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Technical Guide for Implementing Cybersecurity Continuous Monitoring in the Nuclear Industry

A technical guide to assist the nuclear industry in implementing cybersecurity continuous monitoring program. The guide walks through the steps to develop a cybersecurity continuous monitoring program and provides details relative to the nuclear industry. It also includes a series of examples of optional metrics to be used, and technologies that can be useful when implementing a continuous monitoring program.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Implementation of the Windowed Multipole Method in Shift

The windowed multipole (WMP) method has been implemented in the Shift Monte Carlo (MC) radiation transport code with support for both CPU and GPU execution. With this method, small WMP data libraries (~100 MB) can be used to accurately Doppler broaden cross sections to arbitrary temperatures “on the fly” during an MC simulation. This approach yields significant memory savings relative to traditional methods, making it ideal for high-fidelity analysis such as coupled multiphysics simulations. This document provides the exact forms of the WMP equations used by Shift, as well as a detailed description of the structure of WMP HDF5 data files provided by the Massachusetts Institute of Technology (MIT). The Shift implementation has been validated against the OpenMC radiation transport code, with excellent agreement demonstrated for 70 nuclides across an operative range of temperatures. CPU and GPU performance testing using a small module reactor (SMR) problem demonstrated that this method decreases the neutron tracking rate by a factor of ~2 on the Summitdev machine. A new set of WMP data being developed in-house will employ novel methods to improve tracking rates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Development and Implementation of Digital Image Correlation for Out-of-Cell Burst Testing

This report details the progress made towards utilizing in-situ methods to observe and quantify unirradiated Zircaloy-4 (Zr4) fuel cladding deformation during out-of-cell design basis accident conditions, specifically during loss-of-coolant accident (LOCA) burst testing in the Severe Accident Test Station at Oak Ridge National Laboratory. Digital image correlation (DIC) was implemented to calculate cladding strain during burst and infrared (IR) thermography was used to attempt a correlation of strain with temperature and to investigate thermal gradients. For both techniques, early experimentation revealed experimental modifications were necessary for implementation. For DIC, this manifested as shortened cladding lengths which could be centered in front of the viewing chamber bored through the IR furnace side, and for IR thermography this meant conducting burst tests in air without a reaction tube and the incorporation of a SiC shell to eliminate direct IR reflections from the tungsten lamps. In the following, the technical issues and subsequent origin of these modifications are discussed, laying the framework for a proof-of-concept DIC/IR characterization of a burst test in the final section.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Implementation of IAEA Safeguards

The historical evolution of safeguards implementation, Four safeguards strengthening measures implemented by the IAEA post-Iraq, The importance of an additional protocol

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2022

Implementing General Framework in MFIX for Radiative Heat Transfer in Gas-Solid Reacting Flows (Final Report)

The current knowledge gap between radiation and multiphase flow communities is the greatest barrier to developing predictive models for radiation, the dominant mode of heat transfer in gas-solid reacting flows. The objectives of this research are (1) to develop and implement a general framework to support the integration of modern radiation models for gas-solid reacting flows; (2) to implement a methodology for developing new multiphase radiation models with accuracy and efficiency commensurate with their importance in energy-related applications, and (3) to demonstrate the accuracy and efficiency of the radiation models under typical gas-solid reacting flow conditions.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Preliminary Implementation of Two-Dimensional Cartesian Solver in CTF-R

Sub-channel codes are one of the the modeling and simulation tools used for thermal-hydraulic analysis of nuclear reactors. A few examples of such sub-channel codes are the COolant Boiling in Rod Arrays (COBRA) family of codes. The approximations that are used to simplify the fluid conservation equations into sub-channel form, mainly that of axially-dominated flow, lead to noticeable limitations on sub-channels solvers for problems with significant flow in lateral directions. In this report, a two-dimensional Cartesian solver is developed and implemented within CTF-R, which is the residual solver in the North Carolina State University version of COBRA-TF (CTF). The new solver will enable CTF to simulate flow that is not axially-dominated. The appropriate Cartesian forms of the conservation equations are derived and implemented in the solver. Once the conservation equations are established, the process of constructing the matrix system was altered to solve a two-dimensional staggered grid system. A simple case was used to test that the two-dimensional Cartesian solver is accurate. The test problem does not include any source terms or flow in the lateral direction. The results show that the solver was able to run the simple case and converge to a steady-state solution. Future work will focus on testing existing capabilities by using test cases that include transients and equation cross-terms. Future work will also include adding additional capabilities such as enabling the solver to include cases with source terms and three dimensional cases.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗