Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “I&C Modernization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

An investigation of the effects of pitch-roll (de)coupling on helicopter handling qualities

An extensive investigation of the effects of pitch-roll coupling on helicopter handling qualities was performed by the U.S. Army and Deutsche Forschungsanstalt fur Luft- und Raumfahrt (DLR), using a NASA ground-based and a DLR in-flight simulator. Over 90 different coupling configurations were evaluated using a high gain roll-axis tracking task. The results show that although the current ADS-33C coupling criterion discriminates against those types of coupling typical of conventionally controlled helicopters, it is not always suited for the prediction of handling qualities of helicopters with modern control systems. Based on the observation that high frequency inputs during tracking are used to alleviate coupling, a frequency domain pitch-roll coupling criterion that uses the average coupling ratio between the bandwidth and neutral stability frequency is formulated. This criterion provides a more comprehensive coverage with respect to the different types of coupling, shows excellent consistency, and has the additional benefit that compliance testing data are obtained from the bandwidth/phase delay tests, so that no additional flight testing is needed.

Blanken, C. L.↗

Early Proterozoic (2.0 GA) Phosphorites from Pechenga Greenstone Belt and Their Origin

The period of 2500-2000 Ma is heralded by several other hallmark events, including onset and decline of the greatest positive excursion of Beta13Ccarb (Lomagundi-Jatuli Paradox), development of a significant seawater sulphate reservoir, abundant deposition of anomalously organic matter (OM)-rich sediments, the oldest known significant petroleum deposits (Shunga Event), and the appearance of first known marine phosphorites at 2000 Ma as reported here. They occur as numerous rounded, soft-deformed, clasts in fine-pebble intra-formational conglomerates, forming two separate c. 200 m-thick turbidite fans within the 1000 m-thick OM- and sulphide-rich turbiditic greywackes of the Pilgujaervi Formation in the Pechenga Greenstrone Belt, NW Russia. Carbonate-fluorapatite is the main mineral in the phosphorite clasts. OM, framboidal and micronodular pyrite as well as inclusions of quartz and chlorite are additional components. Many clasts show microlayering with a variable degree of soft-deformation, implying that they were derived from non-lithified, bedded phosphorites. Numerous samples revealed diverse microbial microstructures interpreted as cyanobacterial mats consisting of filamentous (1-3 micrometer in diameter, 20 micrometers in length), coccoidal (0.8-1.0 micrometers) and ellipsoidal or rod-shaped microfossils (0.8 micrometers in diameter, around 2 micrometers in length) which morphologically resemble modern Microcoleus and Syphonophycus, Thiocapsa, and Rhabdoderma, respectively, reported from alkaline or saline environments. No principle differences have been found between microfossils described from Cambrian and Phanerozoic and the 2000 Ma phosphorites. The sequence of the early Palaeoproterozoic events which point to a significant oxidation of the hydrosphere, now including formation of phosphorites and change in the phosphorous cycle, mimics the sequence which was repeated once again at the Neoproterozoic-Cambrian transition, implying that oxidation of the terrestrial atmosphere-hydrosphere system experienced an irregular cyclic development.

Rozanov, A. Yu.↗

Water Information System Platforms Addressing Critical Societal Needs in the Mena Region

The MENA region includes 18 countries, the occupied Palestinian territories and Western Sahara. However, the region of interest for this study has a strategic interest in countries adjacent to the Mediterranean Sea, which includes, Morocco, Tunisia, Egypt, Lebanon and Jordan. The 90% of the water in the MENA region is used for the agriculture use. By the end of this century. this region is projected to experience an increase of 3 C to 5 C in mean temperatures and a 20% decline in precipitation (lPCC, 2007). Due to lower precipitation, water run-off is projected to drop by 20% to 30% in most of MENA by 2050 Reduced stream flow and groundwater recharge might lead to a reduction in water supply of 10% or greater by 2050. Therefore, per IPCC projections in temperature rise and precipitation decline in the region, the scarcity of water will become more acute with population growth, and rising demand of food in the region. Additionally, the trans boundary water issues will continue to plague the region in terms of sharing data for better management of water resources. Such pressing issues have brought The World Bank, USAID and NASA to jointly collaborate for establishing integrated, modern, up to date NASA developed capabilities for countries in the MENA region for addressing water resource issues and adapting to climate change impacts for improved decision making and societal benefit. This initiative was launched in October 2011 and is schedule to be completed by the end of2015.

Habib, Shahid↗

Characterization of Orbital Debris via Hyper-Velocity Laboratory-Based Tests

Existing DoD and NASA satellite breakup models are based on a key laboratory test, Satellite Orbital debris Characterization Impact Test (SOCIT), which has supported many applications and matched on-orbit events involving older satellite designs reasonably well over the years. In order to update and improve these models, the NASA Orbital Debris Program Office, in collaboration with the Air Force Space and Missile Systems Center, The Aerospace Corporation, and the University of Florida, replicated a hypervelocity impact using a mock-up satellite, DebriSat, in controlled laboratory conditions. DebriSat is representative of present-day LEO satellites, built with modern spacecraft materials and construction techniques. Fragments down to 2 mm in size will be characterized by their physical and derived properties. A subset of fragments will be further analyzed in laboratory radar and optical facilities to update the existing radar-based NASA Size Estimation Model (SEM) and develop a comparable optical-based SEM. A historical overview of the project, status of the characterization process, and plans for integrating the data into various models will be discussed herein.

Cowardin, Heather↗

Characterization of Orbital Debris via Hyper-Velocity Laboratory-Based Tests

Existing DOD and NASA satellite breakup models are based on a key laboratory test, Satellite Orbital debris Characterization Impact Test (SOCIT), which has supported many applications and matched on-orbit events involving older satellite designs reasonably well over the years. In order to update and improve these models, the NASA Orbital Debris Program Office, in collaboration with the Air Force Space and Missile Systems Center, The Aerospace Corporation, and the University of Florida, replicated a hypervelocity impact using a mock-up satellite, DebriSat, in controlled laboratory conditions. DebriSat is representative of present-day LEO satellites, built with modern spacecraft materials and construction techniques. Fragments down to 2 mm in size will be characterized by their physical and derived properties. A subset of fragments will be further analyzed in laboratory radar and optical facilities to update the existing radar-based NASA Size Estimation Model (SEM) and develop a comparable optical-based SEM. A historical overview of the project, status of the characterization process, and plans for integrating the data into various models will be discussed herein.

Cowardin, Heather↗

Robust Algorithm for Estimating Total Suspended Solids (TSS) in Inland and Nearshore Coastal Waters

One of the challenging tasks in modern aquatic remote sensing is the retrieval of near-surface concentrations of Total Suspended Solids (TSS). This study aims to present a Statistical, inherent Optical property (IOP) -based, and muLti-conditional Inversion proceDure (SOLID) for enhanced retrievals of satellite-derived TSS under a wide range of in-water bio-optical conditions in rivers, lakes, estuaries, and coastal waters. In this study, using a large in situ database (N > 3500), the SOLID model is devised using a three-step procedure: (a) water-type classification of the input remote sensing reflectance (R(sub rs)), (b) retrieval of particulate backscattering (b(sub bp)) in the red or near-infrared (NIR) regions using semi-analytical, machine-learning, and empirical models, and (c) estimation of TSS from b(sub bp) via water-type-specific empirical models. Using an independent subset of our in situ data (N = 2729) with TSS ranging from 0.1 to 2626.8 [g/m (exp 3)], the SOLID model is thoroughly examined and compared against several state-of-the-art algorithms (Miller and McKee, 2004; Nechad et al., 2010; Novoa et al., 2017; Ondrusek et al., 2012; Petus et al., 2010). We show that SOLID outperforms all the other models to varying degrees, i.e., from 10 to > 100%, depending on the statistical attributes (e.g., global versus water-type-specific metrics). For demonstration purposes, the model is implemented for images acquired by the MultiSpectral Imager aboard Sentinel-2A/B over the Chesapeake Bay, San-Francisco-Bay-Delta Estuary, Lake Okeechobee, and Lake Taihu. To enable generating consistent, multimission TSS products, its performance is further extended to, and evaluated for, other missions, such as the Ocean and Land Color Instrument (OLCI), Moderate Resolution Imaging Spectroradiometer (MODIS), Visible Infrared Imaging Radiometer Suite (VIIRS), and Operational Land Imager (OLI). Sensitivity analyses on uncertainties induced by the atmospheric correction indicate that 10% uncertainty in Rrs leads to < 20% uncertainty in TSS retrievals from SOLID. While this study suggests that SOLID has a potential for producing TSS products in global coastal and inland waters, our statistical analysis certainly verifies that there is still a need for improving retrievals across a wide spectrum of particle loads.

Total suspended solids↗

A Comparison of the SOCIT and DebriSat Experiments

This paper explores the differences between, and shares the lessons learned from, two hypervelocity impact experiments critical to the update of Department of Defense (DOD) and National Aeronautics and Space Administration (NASA) satellite breakup models. The procedures as well as the processes of the fourth Satellite Orbital Debris Characterization Impact Test (SOCIT4) were analyzed and related to the ongoing DebriSat experiment. SOCIT4 accounted for about 90% of the entire satellite mass, but only analyzed approximately 59% with a total of approximately 4,700 fragments. DebriSat aims to recover and analyze 90% of the initial mass and to do so, fragments with at least a longest dimension of 2 mm are collected and processed. DebriSat's use of modern materials, especially carbon fiber, significantly increases the fragment count and to date, there are over 126,000 fragments collected. Challenges, such as procedures and human inputs, encountered throughout the DebriSat experiment are also shared. While, SOCIT4 laid the foundation for the majority of DebriSat processes, the technological advancements since SOCIT4 allow for more accurate, rigorous, and in-depth, procedures that will aid the update of satellite breakup models.

Ausay, E.↗

Shifting institutional culture to develop climate solutions with Open Science

This call to action by Drs. Johnson and Wilkinson is part of a mosaic of voices sharing tangible progress within the climate movement 1,2. This call speaks to us as environmental and Earth scientists motivated by the urgency of climate change and social inequity and who contribute to finding science-driven climate solutions as part of our daily jobs. Unfortunately, we are often unable to efficiently move this critical and urgent work forward because we are impeded by cumbersome daily workflows and restrictive workplace cultures. Our workplaces have not kept pace with the modern realities of data-intensive science: increasing data volumes and storage needs, rapidly evolving technology, new skill requirements, and a growing need for extensive and diverse collaboration. Struggling with old approaches and learning new ones in isolation can fuel burnout and turnover, preventing us from working on science-driven climate solutions effectively.

open science↗

Tailless aircraft performance improvements with relaxed static stability

The purpose is to determine the tailless aircraft performance improvements gained from relaxed static stability, to quantify this potential in terms of range-payload improvements, and to identify other possible operational and handling benefits or problems. Two configurations were chosen for the study: a modern high aspect ratio, short-chord wing proposed as a high-altitude long endurance (HALE) remotely piloted vehicle; a wider, lower aspect ratio, high volume wing suitable for internal stowage of all fuel and payload required for a manned long-range reconnaissance mission. Flying at best cruise altitude, both unstable configurations were found to have a 14 percent improvement in range and a 7 to 9 percent improvement in maximum endurance compared to the stable configurations. The unstable manned configuration also shows a 15 percent improvement in the 50 ft takeoff obstacle distance and an improved height response to elevator control. However, it is generally more deficient in control power due to its larger adverse aileron yaw and its higher takeoff and landing lift coefficient C(sub L), both due to the downward trimmed (vs. upward trimmed for stable configurations) trailing edge surfaces.

Ashkenas, Irving L.↗

Freeze-Thaw Cycling as a Chemical Weathering Agent on a Cold and Icy Mars

Liquid water was abundant on early Mars, but whether the climate was warm and wet or cold and icy with punctuated periods of melting is still poorly understood. Modern climate models for Mars tend to predict a colder, icier early climate than previously imagined. In addition, ice and glaciation have been major geologic agents throughout the later Hesperian and Amazonian eras. One process that can act in such climates is repeated freezing and thawing of water on the surface and in the subsurface, and is significant because it can occur anywhere with an active layer and could have persisted for a time after liquid water was no longer stable on Mars’ surface. As freeze-thaw is the dominant mechanical weathering process in most glacial/periglacial terrains, it was likely a significant geomorphologic driver at local to regional scales during past climates, and would potentially have been most active when day-average surface temperatures exceeded 0 °C for part of the year. Indeed, freeze-thaw involving liquid water in the Amazonian is evidenced by abundant geomorphic features including polygonal ground and solifluction lobes requiring seasonal thawing. In addition to physical modification, freezing can drive solutions towards supersaturation and force dissolved solutes out as precipitates. In Mars-like terrains, dissolved solutes are typically dominated by silica. In polar regions on Earth, freeze-thaw cycles have been shown to promote deposition of silica, and freeze-thaw experiments on synthetic solutions found stable amorphous silica that built up over multiple cycles. Freeze-thaw may therefore be an important but overlooked chemical weathering process on Mars. However, our ability to assess its impact on alteration of martian terrains is majorly limited by the current lack of understanding of the alteration phases produced (and formation rates) under controlled freeze-thaw weathering of Mars-relevant materials. To address this knowledge gap, we report results from (1) freeze-thaw weathering products found at a glacial Mars analog site at the Three Sisters, Oregon, and (2) new controlled freeze-thaw experiments on basaltic material.

Scudder, N. A.↗

The Future of Astronaut Nutrition: Daily Production of Kefir Nutrient Packs in a Lunar Analog Mission

Astronaut nutrition will need to be supplemented with fresh nutrients and probiotics for long duration space travel. Kefir is a fermented milk beverage that provides probiotic bacteria, protein, calcium, and vitamin K. It has been historically cultured for thousands of years and is a modern-day health food. During the BioNutrients-2 experiment, one generation of kefir was cultured by astronauts on the ISS in fluorinated ethylene propylene (FEP) bags. This follow-on experiment aimed to test the hypothesis that kefir can be produced at ambient temperatures and safely passaged to make a series of nutrient packs in an analog environment. The Hawaiian Space Exploration Analog and Simulation (HI-SEAS) is a semi-controlled habitat located on the Mauna Loa volcano on the island of Hawaii at 2,500 m elevation. The recent EMMIHS (EuroMoonMars, International MoonBase Alliance, HI-SEAS) missions comprised of interdisciplinary, international crews for mock lunar missions. During a six-day mission in March 2024, crew members tested continuous passaging of kefir cultures (C-FIR commercial strain). After approximately 24 hours of growth, a portion of culture was used to seed the next generation of culture bags for four passages. A color board and pH indicator allowed the crew to easily determine when the culture had reached optimal pH. Laboratory analysis at NASA Ames Research Center showed that the pH met Kefir standards (<5). The yeast and lactic acid bacteria were in normal range and no contamination was detected in the final passage. By successfully accomplishing this experiment the team has demonstrated the ability to safely produce daily cultures of kefir in a microgravity applicable growth system.

Astronaut nutrition↗

Application of Modern Aperture Integration (AI) and Geometrical Theory of Diffraction (GTD) Techniques for Analysis of Large Reflector Antennas

The application of aperture integration (AI) and geometrical theory of diffraction (GTO) techniques to analyze large reflector antennas is outlined. The following techniques were used: computer modeling, validation of analysis and computer codes, computer aided design modifications, limitation on the conventional aperture integration (AIC) method, extended aperture integration (AIE) method, the AIE method for feed scattering calculations, near field probing predictions for 15 meter model, limitation on AIC for surface tolerance effects, aperture integration on the surface (AIS) method, and AIC and GTD calculations for compact range reflector.

Rudduck, R. C.↗

Modern sources of dust in the solar system

The observed size-frequency distributions of the main-belt and family asteroids and the results of an analysis of the IRAS data on the zodiacal background and the solar system dustbands were used to estimate the extent of the contribution of asteroidal dust to the zodiacal cloud. It is concluded that the total asteroidal contribution to the zodiacal signal is probably 40% of the total flux. Thus, some 60% of the flux probably derives from a source other than main-belt asteroids.

Dermott, Stanley F.↗

White Paper on Nuclear Astrophysics and Low Energy Nuclear Physics Part 1: Nuclear Astrophysics

This white paper informs the nuclear astrophysics community and funding agencies about the scientific directions and priorities of the field and provides input from this community for the 2015 Nuclear Science Long Range Plan. It summarizes the outcome of the nuclear astrophysics town meeting that was held on August 21-23, 2014 in College Station at the campus of Texas AM University in preparation of the NSAC Nuclear Science Long Range Plan. It also reflects the outcome of an earlier town meeting of the nuclear astrophysics community organized by the Joint Institute for Nuclear Astrophysics (JINA) on October 9-10, 2012 Detroit, Michigan, with the purpose of developing a vision for nuclear astrophysics in light of the recent NRC decadal surveys in nuclear physics (NP2010) and astronomy (ASTRO2010). The white paper is furthermore informed by the town meeting of the Association of Research at University Nuclear Accelerators (ARUNA) that took place at the University of Notre Dame on June 12-13, 2014. In summary we find that nuclear astrophysics is a modern and vibrant field addressing fundamental science questions at the intersection of nuclear physics and astrophysics. These questions relate to the origin of the elements, the nuclear engines that drive life and death of stars, and the properties of dense matter. A broad range of nuclear accelerator facilities, astronomical observatories, theory efforts, and computational capabilities are needed. With the developments outlined in this white paper, answers to long standing key questions are well within reach in the coming decade.

Nuclear astrophysics; White paper; Nucleosynthesis↗

Landing practices of general aviation pilots in single-engine light airplanes

The methods and techniques used by a group of general aviation pilots during the landing phase of light airplane operations are documented. The results of 616 landings made by 22 pilots in 2 modern, four-place, single-engine, flight airplanes (one having a low wing and the other, a high wing) are presented. The landings were made on both a long runway (1524 m (5000 ft)) and a short runway (762 m (2500 ft)); both runways were considered typical of those used in general aviation. The results generally show that most of the approaches were fast with considerable floating during the flares and with touchdowns that were relatively flat or nose-low.

Goode, M. W.↗

Techniques for improving transients in learning control systems

A discrete modern control formulation is used to study the nature of the transient behavior of the learning process during repetitions. Several alternative learning control schemes are developed to improve the transient performance. These include a new method using an alternating sign on the learning gain, which is very effective in limiting peak transients and also very useful in multiple-input, multiple-output systems. Other methods include learning at an increasing number of points progressing with time, or an increasing number of points of increasing density.

Chang, C.-K.↗

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗