SEARCH · Engineering Papers

Results for “Hydrate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Weathering of sulfides on Mars

Pyrrhotite-pentlandite assemblages in mafic and ultramafic igneous rocks may have contributed significantly to the chemical weathering reactions that produce degradation products in the Martian regolith. By analogy and terrestrial processes, a model is proposed whereby supergene alteration of these primary Fe-Ni sulfides on Mars has generated secondary sulfides (e.g., pyrite) below the water table and produced acidic groundwater containing high concentrations of dissolved Fe, Ni, and sulfate ions. The low pH solutions also initiated weathering reactions of igneous feldspars and ferromagnesian silicates to form clay silicate and ferric oxyhydroxide phases. Near-surface oxidation and hydrolysis of ferric sulfato-and hydroxo-complex ions and sols formed gossan above the water table consisting of poorly crystalline hydrated ferric sulfates (e.g., jarosite), oxides (ferrihydrite, goethite), and silica (opal). Underlying groundwater, now permafrost contains hydroxo sulfato complexes of Fe, Al, Mg, Ni, which may be stabilized in frozen acidic solutions beneath the surface of Mars. Sublimation of permafrost may replenish colloidal ferric oxides, sulfates, and phyllosilicates during dust storms on Mars.

Burns, Roger G.↗

NASA NTRS1987

Analytical electron microscopy of extraterrestrial materials - Results from microtome sections of carbonaceous chondrites and interplanetary dust particles

The paper describes a method for embedding, sectioning, and observing two types of extraterrestrial materials, including hydrated interplanetary dust particles (IDPs) and carbonaceous chondrite meteorites. The technique, which produces large thin areas suitable for both high-resolution imaging and thin-film microanalysis, was applied to study the petrology of the IDP Ames-DE C86-11, the Murchison carbonaceous chondrite matrix, and the Allende dark inclusion. The technique makes it possible to maintain delicate interfaces, boundaries, and phase relationships between grains. Because phases are held in place, layer lattice silicates and other minerals with strong preferred orientations can be viewed in any orientation, including the orientation normal to their basal planes.

Blake, D. F.↗

NASA NTRS1987

Fluoride glass starting materials - Characterization and effects of thermal treatment

The production of heavy metal fluoride (HMF) glasses, and the effects of thermal treatments on the HMF glasses are investigated. ZrF4, BaF2, AlF3, LaF3, and NaF were utilized in the synthesis of zirconium-barium-lanthanum-aluminum-sodium fluoride glass. The purity of these starting materials, in particular ZrF4, is evaluated using XRD analysis. The data reveal that low temperature heating of ZrF4-H2O is effective in removing the water of hydration, but causes the production of ZrF4 and oxyfluorides; however, dehydration followed by sublimation results in the production of monoclinic ZrFe without water or oxyfluoride contaminants.

Chen, William↗

NASA NTRS1987

Radio science with Voyager 2 at Uranus - Results on masses and densities of the planet and five principal satellites

Phase-coherent Doppler data generated by the Deep Space Network with the radio communication system during the Voyager 2 encounter with Uranus in January 1986, optical navigation data generated by the Voyager Navigation Team with the Voyager 2 imaging system, and ground-based astrometric data obtained over an 8-yr period are compiled and analyzed to determine the masses and densities of Uranus and its principal satellites. The data-analysis procedures are explained in detail, and the results are presented in tables and graphs. The mean density of Uranus is found to be 1.285 + or - 0.001 g/cu cm, whereas the mean uncompressed mass of all five satellites is 1.48 + or - 0.06 g/cu cm, or 0.10 g/cu cm above the density expected for a homogeneous solar mix of rock, H2O and NH3 ice, and CH4 as clathrate hydrate. This difference is tentatively attributed to the presence of 15 mass percent of pure graphite, which would provide the thermal conductivity required to keep the satellites cold and undifferentiated.

Anderson, J. D.↗

NASA NTRS1988

Murchison xenoliths

C3 xenoliths in a C2 host (Murchison) are unique among known meteoritic xenolith-host occurrences. They offer an opportunity to determine possible effects on the xenoliths by the hydrated host. Eleven xenoliths were found ranging from 2 to 13 mm. Four of these Murchison Xenoliths (MX1, MX2, MX3 and MX4) have been studied in detail. MX1 and MX2 were large enough for trace element, oxygen isotope, carbon isotope, bulk carbon and bulk nitrogen determinations. All four were studied petrographically and by analytical SEM. The xenoliths cannot be unequivocally identified as C3V or C3O subtypes. MX1 contains some matrix phyllosilicate, indicating reaction with water. MX1, MX2 and MX3 all show extensive alteration by an FeO-rich medium, and some minerals in them contain ferric iron. MX4, however, exhibits very minor alteration by FeO only. Oxygen isotopic and chemical data show that the alteration of these xenoliths did not take place in the Murchison host. The alterations occurred in one or more parent bodies, which were later disrupted to release these xenoliths that ultimately accreted onto the Murchison parent body.

Olsen, Edward J.↗

NASA NTRS1988

Sampling the oxidative weathering products and the potentially acidic permafrost on Mars

Large areas of Mars' surface are covered by oxidative weathering products containing ferric and sulfate ions having analogies to terrestrial gossans derived from sulfide mineralization associated with iron-rich basalts. Chemical weathering of such massive and disseminated pyrrhotite-pentlandite assemblages and host basaltic rocks in the Martian environment could have produced metastable gossaniferous phases (limonite containing poorly crystalline hydrated ferric sulfates and oxyhydroxides, clay silicates and opal). Underlying groundwater, now permafrost on Mars, may still be acidic due to incomplete buffering reactions by wall-rock alteration of unfractured host rock. Such acidic solutions stabilize temperature-sensitive complex ions and sols which flocculate to colloidal precipitates at elevated temperatures. Sampling procedures of Martian regolith will need to be designed bearing in mind that the frozen permafrost may be corrosive and be stabilizing unique complex ions and sols of Fe, Al, Mg, Ni and other minor elements.

Burns, Roger G.↗

NASA NTRS1988

Sulfide mineralization: Its role in chemical weathering of Mars

Pyrrhotite-pentlandite assemblages in mafic and ultramafic igneous rocks may have contributed significantly to the chemical weathering reactions that produced degradation products in the Martian regolith. By analogy with terrestrial processes, a model is proposed whereby supergene alteration of these primary Fe-Ni sulfides on Mars has generated secondary sulfides (e.g., pyrite) below the water table and produced acidic groundwater containing high concentrations of dissolved Fe, Ni and sulfate ions. The low pH solutions also initiated weathering reactions of igneous feldspars and ferromagnesian silicates to form clay silicate and ferric oxyhydroxide phases. Near-surface oxidation and hydrolysis of ferric sulfato- and hydroxo-complex ions and sols formed gossans above the water table consisting of poorly crystalline hydrated ferric sulfates (e.g., jarosite), oxides (ferrihydrite, goethite) and silica (opal). Underlying groundwater, now permafrost, contains hydroxo sulfato complexes of Fe, Al, Mg, Ni, etc., which may be stabilized in frozen acidic solutions beneath the surface of Mars. Sublimation of permafrost may replenish colloidal ferric oxides, sulfates and phyllosilicates during dust storms on Mars.

Burns, Roger G.↗

NASA NTRS1988

Surface compositional and structural aspects of Martian samples

There are many excellent reasons to examine the surface composition of a wide range of Martian samples. The existing spectral data indicate that many dust and soil particles have a thin Fe(+3) layer with a typical particle size in the 10 micrometer to 400 micrometer range. In view of the high CO2 content of the atmosphere, one might expect that surface carbonates should be present. In addition to chemisorbed material there will probably exist physisorbed atmospheric components of the atmosphere including oxygen, nitrogen and water vapor. The latter could possibly give rise to some hydrated minerals. Using ultra-high-vacuum/mass spectrographic techniques it should be possible to detect physisorbed and moderately strong chemisorbed species on the particle surfaces with a temperature programmed degassing procedure. In some instances such an approach is capable of helping distinguish between volcanic and impact generated materials by detecting the presence of fumerolic gases. Such gases typically condense on the exterior of the ejected particles. Additionally surface atomic and chemical compositions should be examined by a combination of modern surface analytical techniques. The combination we currently have in Buffalo at SUNY would appear to be one of the best available including ESCA (150 micrometer spot capability) Auger (SAM) with 300 A focussing for surface compositional surveys, SIMS for high sensitivity trace element detection and ISS for immediate surface layer analysis.

Cadenhead, D. A.↗

NASA NTRS1988

Crystallization of supercooled solutions

Crystallization of uniformly supercooled solutions (Na2SO4, NaCl, H2SO4, HNO3, HCl) was studied. It is shown how crystal growth velocity and habit depend on solution and concentration. The segregation coefficient for the solute in ice is measured by analysis of ice and solution, separated immediately after initial freezing, at different supercoolings. Subsequent solidification gives ion rejection at a varying rate depending on the geometry of the freezing, and may result in separation of hydrates, particularly when the initial concentration is high, as in haze (inactivated) droplets and low temperatures found in the Antarctic stratosphere. Electrical effects associated with rapid freezing are also investigated. Results suggest that more extensive measurements need to be made in solutions at different supercoolings, and that substantial electrical effects may be present for higher concentrations under these conditions. Damage to vegetation could occur under specific conditions as concentrated solutions (possibly H2SO4) are rejected in the freezing of rime or dew.

Harrison, K.↗

NASA NTRS1988

Collisions with ice-volatile objects: Geological implications

The collision of the Earth with extra-terrestrial ice-volatile bodies is proposed as a mechanism to produce rapid changes in the geologic record. These bodies would be analogs of the ice satellites found for the Jovian planets and suspected for comets and certain low density bodies in the Asteroid belt. Five generic end-members are postulated: (1) water ice; (2) dry ice: carbon-carbon dioxide rich, (3) oceanic (chloride) ice; (4) sulfur-rich ice; (5) ammonia hydrate-rich ice; and (6) clathrate: methane-rich ice. Due to the volatile nature of these bodies, evidence for their impact with the Earth would be subtle and probably best reflected geochemically or in the fossil record. Actual boloids impacting the Earth may have a variable composition, generally some admixture with water ice. However for discussion purposes, only the effects of a dominant component will be treated. The general geological effects of such collisions, as a function of the dominant component would be: (1) rapid sea level rise unrelated to deglaciation, (2) decreased oceanic pH and rapid climatic warming or deglaciation; (3) increased paleosalinities; (4) increased acid rain; (5) increased oceanic pH and rapid carbonate deposition; and (6) rapid climatic warming or deglaciation.

Wilde, P.↗

NASA NTRS1989

The application of Dow Chemical's perfluorinated membranes in proton-exchange membrane fuel cells

Dow Chemical's research activities in fuel cell devices revolves around the development and subsequent investigation of the perfluorinated inomeric membrane separator useful in proton-exchange membrane systems. Work is currently focusing on studying the effects of equivalent weight, thickness, water of hydration, pretreatment procedures, as well as the degree of water management required for a given membrane separator in the cell. The presentation will include details of certain aspects of the above as well as some of the requirements for high and low power generation.

Eisman, G. A.↗

NASA NTRS1989

Soil developments in polar deserts: Implications for exobiology and future Mars missions

Chemical alterations, weathering, and diagenesis of soil profiles from the dry valleys of Antarctica were studied as analogs of regolith development for the Martian regolith. Chemical weathering processes play an important part in soil development within the dry valleys of Antarctica. A suite of core samples were studied which were taken within the valley floors in addition to samples taken in the vicinity of evaporite and brine ponds. Analysis of water soluable cations and anions from core samples were performed along with petrographic analysis of selected samples. It was shown that ionic transport processes operate primarily above the permafrost zone. Abundances of the water soluable ions reflect the nature of secondary minerals produced by evaporation and weathering. Chloride, calcium, and sodium abundances for soils from the cores within the North and South Forks of Wright Valley, reflect the secondary mineralogy of the soil columns. Calculations for Na, Ca, and Cl abundances reflect the appearance of halite and antarcticite. In areas where excess Ca is present, X-ray diffraction studies show the presence of gypsum. It is well known that the Martian surface conditions may be favorable for chemical weathering. Primary silicates would be expected to be reactive with any ground water. It seems likely that Martian subsurface water is available to assist in the weathering of the primary minerals. Such weathering could result in the formation of clays, sulfates, carbonates, hydrates, halides, and zeolites. The dry valley cores have shown that they maybe excellent analogs to weathering processes on the near-surface of Mars. Since movement of water within the near-surface region clearly results in chemical weathering, leaching, and salt formation in the dry valleys, similar processes are probably operating within the Martian regolith.

Gibson, Everett K., Jr.↗

NASA NTRS1988

Lunar and Planetary Science Conference, 18th, Houston, TX, Mar. 16-20, 1987, Proceedings

Papers on lunar and planetary science are presented, including petrogenesis and chemistry of lunar samples, geology and petrogenesis of the Apollo 15 landing site, lunar geology and applications, cratering records and cratering effects, differentiated meteorites, chondritic meteorites and asteroids, extraterrestrial grains, Venus, Mars, and icy satellites. The importance of lunar granite and KREEP in very high potassium basalt petrogenesis, indentifying parent plutonic rocks from lunar breccia and soil fragments, glasses in ancient and young Apollo 16 regolith breccias, the formation of the Imbrium basin, the chemistry and petrology of the Apennine Front, lunar mare ridges, studies of Rima Mozart, electromagnetic energy applications in lunar resource mining and construction, detecting a periodic signal in the terrestrial cratering record, and a search for water on the moon, are among the topics discussed. Other topics include the bidirectional reflectance properties of Fe-Ni meteorites, the nature and origin of C-rich ordinary chondrites and chondritic clasts, the dehydration kinetics of shocked serpentine, characteristics of Greenland Fe/Ni cosmic grains, electron microscopy of a hydrated interplanetary dust particle, trapping Ne, Ar, Kr, and Xe in Si2O3 smokes, gossans on Mars, and a model of the porous structure of icy satellites.

Ryder, Graham↗

NASA NTRS1988

Three-layered models of Ganymede and Callisto - Compositions, structures, and aspects of evolution

The structural models presently defined for Ganymede and Callisto, which encompass a pure-ice upper layer, a mixed ice/rock lower mantle, and a rock core, incorporate three alternative rock component candidates representing various degrees of silicate hydration and oxidation. The three-layered model facilitates close study of the radius increase required for the internal differentiation of an ice-rock satellite; such expansion is determined to be most significant early in the process, and less so as differentiation approaches completion. The probability of postaccretional melting due to radiogenic heating is calculated.

Mueller, Steve↗

NASA NTRS1988

The chemistry of comets

Comets appear to represent a population of rather homogeneous objects. In particular, the original size distribution peaks at a mean diameter of the order of 10 km. Cometary dust grains appear to be made of clusters of extremely fine particles (0.1-1.0 micron) sintered by heat at a variable degree during their perihelion passages. The brightness laws of comets appear to be derived only by the sublimation of water ice or at least of gas hydrates of the clathrate type. Pristine nuclei are likely to be radially undifferentiated; only their crustal surface must be outgassed and sintered by the heat of perihelion passages. Comet Halley is confirmed to be in the same general class as the bright comets of the 1970s. With an organic fraction of 33 percent in the cometary dust, the carbon of Comet Halley is close to cosmic abundances.

Delsemme, A. H.↗

NASA NTRS1989

Effect of water on the composition of partial melts of greenstone and amphibolite

Closed-system partial melts of hydrated, metamorphosed arc basalts and andesites (greenstones and amphibolites), where only water structurally bound in metamorphic minerals is available for melting (dehydration melting), are generally water-undersaturated, coexist with plagioclase-rich, anhydrous restites, and have compositions like island arc tonalites. In contrast, water-saturated melting at water pressures of 3 kilobars yields strongly peraluminous, low iron melts that coexist with an amphibole-bearing, plagioclase-poor restite. These melt compositions are unlike those of most natural silicic rocks. Thus, dehydration melting over a range of pressures in the crust of island arcs is a plausible mechanism for the petrogenesis of islands arc tonalite, whereas water-saturated melting at pressure of 3 kilobars and above is not.

Beard, James S.↗

NASA NTRS1989

The identification of crystalline olivine in cometary silicates

An intermediate-resolution spectrum of the 8-13 micron region in comet Halley is obtained which shows a prominent silicate emission feature with structure not observed before in other comets or in interstellar silicates. The presence of a strong 11.3 micron peak reported by Bregman and coworkers is confirmed, and evidence is found for additional structure in the band. By comparison with spectra of interplanetary dust particles and laboratory silicates, it is concluded that small crystalline olivine particles are a major component of the silicates in this comet; other silicates (e.g., amorphous or hydrated) must also be present. The identification of crystalline olivine in this part of the spectrum is supported by the observation of four peaks in 20-50 micron airborne spectra of this comet which have also been attributed to olivine.

Campins, Humberto↗

NASA NTRS1989

Absorption features in the 3 micron spectra of protostars

Low-resolution spectra have been obtained for a selection of infrared protostars and one object located behind the Taurus dark cloud. Most of the differences in the spectra can be attributed to different H2O ice temperatures combined with additional broad absorption between 3.3 and 3.5 microns plus another absorption in the 2.8-2.9 micron range. An NH3-H2O ice mixture, scattering by H2O ice-coated grains, and hydrated silicates are ruled out as explanations for the last type of absorption. The most plausible explanation is still some form of hydrocarbon in the grain mantles.

Smith, Robert G.↗