Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High operating temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Characteristic features of the operation of high-temperature heat pipes with a noncondesable gas

The principal concepts related to the nature of the processes occurring in high-temperature heat pipes with a noncondensable gas are examined, and guidelines for the development of such heat pipes are presented. The discussion is illustrated by experimental results obtained for a horizontal sodium heat pipe (diameter, 18/1 mm; length, 710 mm). In particular, attention is given to the starting dynamics and mechanisms, the shape of the vapor-gas front, and the vapor-gas front velocity.

Tolubinskiy, V. I.↗

Practical Challenges and Failure Modes During Fabrication of Haynes 230 Micro-Pin Solar Receivers for High Temperature Supercritical Carbon Dioxide Operation

Printed circuit heat exchangers (PCHX) fabricated from high nickel alloys have shown promise as primary heat exchangers, recuperators, and solar receivers for high temperature and pressure supercritical carbon dioxide power cycles. There are numerous challenges in fabricating these devices including forming channel features, joining via diffusion or transient liquid phase bonding, and brazing/welding of headers. Commercial entities are understandably hesitant to share propriety best practices, and both commercial and non-commercial entities working on these components tend not to publically share failures and mistakes. However, sharing of this information could prevent similar costly errors and further the understanding of the coupled manufacturing, materials and mechanics issues in creating these components. Thus, in this paper, we document the challenges, failures, and mitigation methods uncovered in fabrication of prototype micro-pin based solar thermal receivers constructed of Haynes 230 and fabricated through a combination of photochemical machining (PCM), wire electrical discharge machining (EDM), transient liquid phase (TLP) bonding, vacuum brazing, and gas tungsten arc welding (GTAW). The receiver is designed to absorb concentrated solar fluxes greater than 140 W cm-2, while heating supercritical carbon dioxide from 550 °C to 720 °C at a pressure of 20 MPa to 25 MPa. The prototype receiver consists of a thin (~ 450 µm), Haynes 230 coversheet bonded to a 15 cm × 15 cm Haynes 230 micro-pin plate. The pieces are joined using a TLP bonding process with a nickel-phosphorus interlayer. Prior to bonding, micro-pins with height ~150 µm and diameter 300 µm are fabricated using PCM in the plate, and through slot features are made using wire EDM. Finally, flow headers are joined to the microchannel plate through a combination of vacuum brazing and GTAW. During hydrostatic proof testing, the prototype device failed when the coversheet delaminated from the pin array at a pressure of 290 bar. A failure analysis including scanning electron microscopy (SEM) to view failure sites and energy-dispersive X-ray spectroscopy (EDS) to evaluate elemental analysis of the failed areas was conducted. The failure modes can be broadly categorized as (1) failures potentially relating to reliquification of the transient liquid phase bonds between the micro-pins plate and coversheet during post-processing, (2) failures related to manufacturing defects, and (3) failures attributed to design.

14 SOLAR ENERGY↗

Wide Operating Temperature Range Electrolytes for High Voltage and High Specific Energy Li-Ion Cells

A number of electrolyte formulations that have been designed to operate over a wide temperature range have been investigated in conjunction with layered-layered metal oxide cathode materials developed at Argonne. In this study, we have evaluated a number of electrolytes in Li-ion cells consisting of Conoco Phillips A12 graphite anodes and Toda HE5050 Li(1.2)Ni(0.15)Co(0.10)Mn(0.55)O2 cathodes. The electrolytes studied consisted of LiPF6 in carbonate-based electrolytes that contain ester co-solvents with various solid electrolyte interphase (SEI) promoting additives, many of which have been demonstrated to perform well in 4V systems. More specifically, we have investigated the performance of a number of methyl butyrate (MB) containing electrolytes (i.e., LiPF6 in ethylene carbonate (EC) + ethyl methyl carbonate (EMC) + MB (20:20:60 v/v %) that contain various additives, including vinylene carbonate, lithium oxalate, and lithium bis(oxalato)borate (LiBOB). When these systems were evaluated at various rates at low temperatures, the methyl butyrate-based electrolytes resulted in improved rate capability compared to cells with all carbonate-based formulations. It was also ascertained that the slow cathode kinetics govern the generally poor rate capability at low temperature in contrast to traditionally used LiNi(0.80)Co(0.15)Al(0.05)O2-based systems, rather than being influenced strongly by the electrolyte type.

Li-ion Battery↗

Sample seal-and-drop device and methodology for high temperature oxide melt solution calorimetric measurements of PuO 2

Thermodynamic properties of refractory materials, such as standard enthalpy of formation, heat content, and enthalpy of reaction, can be measured by high temperature calorimetry. In such experiments, a small sample pellet is dropped from room temperature into a calorimeter operating at high temperature (often 700 °C) with or without a molten salt solvent present in an inert crucible in the calorimeter chamber. However, for hazardous (radioactive, toxic, etc.) and/or air-sensitive (hygroscopic, sensitive to oxygen, pyrophoric, etc.) samples, it is necessary to utilize a sealed device to encapsulate and isolate the samples, crucibles, and solvent under a controlled atmosphere in order to prevent the materials from reactions and/or protect the personnel from hazardous exposure during the calorimetric experiments. We have developed a sample seal-and-drop device (calorimetric dropper) that can be readily installed onto the dropping tube of a calorimeter such as the Setaram AlexSYS Calvet-type high temperature calorimeter to fulfill two functions: (i) load hazardous or air-sensitive samples in an air-tight, sealed container and (ii) drop the samples into the calorimeter chamber using an “off-then-on” mechanism. As a case study, we used the calorimetric dropper for measurements of the enthalpy of drop solution of PuO 2 in molten sodium molybdate (3Na 2 O · 4MoO 3 ) solvent at 700 °C. The obtained enthalpy of –52.21 ± 3.68 kJ/mol is consistent with the energetic systematics of other actinide oxides (UO 2 , ThO 2 , and NpO 2 ). In conclusion, this capability has thus laid the foundation for thermodynamic studies of other Pu-bearing phases in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room-temperature cycling of metal fluoride electrodes: Liquid electrolytes for high-energy fluoride ion cells

Fluoride ion batteries are potential “next-generation” electrochemical storage devices that offer high energy density. At present, such batteries are limited to operation at high temperatures because suitable fluoride ion–conducting electrolytes are known only in the solid state. We report a liquid fluoride ion–conducting electrolyte with high ionic conductivity, wide operating voltage, and robust chemical stability based on dry tetraalkylammonium fluoride salts in ether solvents. Pairing this liquid electrolyte with a copper–lanthanum trifluoride (Cu@LaF 3 ) core-shell cathode, we demonstrate reversible fluorination and defluorination reactions in a fluoride ion electrochemical cell cycled at room temperature. Fluoride ion–mediated electrochemistry offers a pathway toward developing capacities beyond that of lithium ion technology.

Davis, Victoria K.↗

Lubrication of optimized-design tapered-roller bearings to 2.4 million DN

The performance of 120.65 mm (4.75 in.) bore high speed design, tapered roller bearings was investigated at shaft speeds to 20,000 rpm (2.4 million DN) under combined thrust and radial load. The test bearing design was computer optimized for high speed operation. Temperature distribution bearing heat generation were determined as a function of shaft speed, radial and thrust loads, lubricant flow rates, and lubricant inlet temperature. The high speed design, tapered roller bearing operated successfully at shaft speeds up to 20,000 rpm under heavy thrust and radial loads. Bearing temperatures and heat generation with the high speed design bearing were significantly less than those of a modified standard bearing tested previously. Cup cooling was effective in decreasing the high cup temperatures to levels equal to the cone temperature.

Parker, R. J.↗

Core-Shell Heterostructures as Solid Oxide Fuel Cell Electrodes

The goals of the project are to synthesize and deploy core-shell heterostructures as solid oxide fuel cell (SOFC) cathodes which exhibit high oxygen reduction rates at lower operating temperatures resulting in high performance at lower operating temperature and simultaneously exhibit longterm resistance to Cr-impurity attack induced performance degradation. An ancillary objective is to eliminate cumbersome, multiple infiltration steps in the cathode to achieve high performance. The expected outcomes are (1) a novel, environmentally benign, and inexpensive synthesis tool for synthesizing complex cathode powders, scalable to high volumes; (2) decrease in energy expenditure during synthesis of cathode powders; (3) up to a factor of 1.5 improvement in maximum power density of single cells at 700ºC; and (4) significant improvements in cell performance degradation rates down to 0.02%/1000 h.

03 NATURAL GAS↗

Core-Shell Heterostructures as Solid Oxide Fuel Cell Electrodes

The goals of the project are to synthesize and deploy core-shell heterostructures as solid oxide fuel cell (SOFC) cathodes which exhibit high oxygen reduction rates at lower operating temperatures resulting in high performance at lower operating temperature and simultaneously exhibit longterm resistance to Cr-impurity attack induced performance degradation. An ancillary objective is to eliminate cumbersome, multiple infiltration steps in the cathode to achieve high performance. The expected outcomes are (1) a novel, environmentally benign, and inexpensive synthesis tool for synthesizing complex cathode powders, scalable to high volumes; (2) decrease in energy expenditure during synthesis of cathode powders; (3) up to a factor of 1.5 improvement in maximum power density of single cells at 700ºC; and (4) significant improvements in cell performance degradation rates down to 0.02%/1000 h.

03 NATURAL GAS↗

Core-Shell Heterostructures as Solid Oxide Fuel Cell Electrodes Quarterly Report

The goals of the project are to synthesize and deploy core-shell heterostructures as solid oxide fuel cell (SOFC) cathodes which exhibit high oxygen reduction rates at lower operating temperatures resulting in high performance at lower operating temperature and simultaneously exhibit longterm resistance to Cr-impurity attack induced performance degradation. An ancillary objective is to eliminate cumbersome, multiple infiltration steps in the cathode to achieve high performance. The expected outcomes are (1) a novel, environmentally benign, and inexpensive synthesis tool for synthesizing complex cathode powders, scalable to high volumes; (2) decrease in energy expenditure during synthesis of cathode powders; (3) up to a factor of 1.5 improvement in maximum power density of single cells at 700ºC; and (4) significant improvements in cell performance degradation rates down to 0.02%/1000 h.

20 FOSSIL-FUELED POWER PLANTS↗

Core-Shell Heterostructures as Solid Oxide Fuel Cell Electrodes Quarterly Report

The goals of the project are to synthesize and deploy core-shell heterostructures as solid oxide fuel cell (SOFC) cathodes which exhibit high oxygen reduction rates at lower operating temperatures resulting in high performance at lower operating temperature and simultaneously exhibit longterm resistance to Cr-impurity attack induced performance degradation. An ancillary objective is to eliminate cumbersome, multiple infiltration steps in the cathode to achieve high performance. The expected outcomes are (1) a novel, environmentally benign, and inexpensive synthesis tool for synthesizing complex cathode powders, scalable to high volumes; (2) decrease in energy expenditure during synthesis of cathode powders; (3) up to a factor of 1.5 improvement in maximum power density of single cells at 700ºC; and (4) significant improvements in cell performance degradation rates down to 0.02%/1000 h.

03 NATURAL GAS↗

Electrolytes for Use in High Energy Lithium-Ion Batteries with Wide Operating Temperature Range

Objectives of this work are: (1) Develop advanced Li -ion electrolytes that enable cell operation over a wide temperature range (i.e., -30 to +60C). (2) Improve the high temperature stability and lifetime characteristics of wide operating temperature electrolytes. (3) Improve the high voltage stability of these candidate electrolytes systems to enable operation up to 5V with high specific energy cathode materials. (4) Define the performance limitations at low and high temperature extremes, as well as, life limiting processes. (5) Demonstrate the performance of advanced electrolytes in large capacity prototype cells.

voltage stability↗