Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Temperature Properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Codes and standards for ceramic composite core materials for High Temperature Reactor applications

Fiber-reinforced ceramic matrix composites are attractive for high-temperature nuclear applications due to excellent thermal and mechanical properties as well as reasonable-to-outstanding radiation resistance. Over the past 20 years, the use of ceramic matrix composite applications expanded to many commercial non-nuclear industries as fabrication and application of the technologies mature. The ASME Boiler Pressure Vessel Code, under Section III Division 5, provides the design and construction rules for High Temperature Reactor components. It published the first rules for ceramic matrix composites to be used for reactor core components. The rules lay out the quality requirements together with the design and materials criteria for the use and application of silicon carbide- and carbon-based matrix material technologies. As with the established graphite rules, the ceramic composite material rules are structured in Subsection HH (from Section III), that addresses the criteria for class SN nonmetallic core components. The code rules rely heavily on the development and publication of standards for composite specification, classification, and testing of mechanical, thermal, and other properties. These test methods are developed in ASTM Committee C28 on Advanced Ceramics, with a current focus on ceramic composite tubes. This article describes the detail of the composites code, the design methodology and similarities to the graphite code, the guidance for the development of specifications for ceramic composites (for nuclear applications) including recent standard developments, and it mentions the next steps to support licensing aspects by validating the code with benchmarking data.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Be₂C as a neutron moderator for molten salt reactors: A first-principles study of structural, electronic, and defect properties

Beryllium carbide (Be 2 C), valued for its high neutron moderation efficiency and low absorption cross section, is a promising high-temperature neutron moderator for molten salt reactors. Its practical adoption, however, demands significant technological maturation, requiring comprehensive theoretical and experimental studies of its response to different conditions, including high temperature and irradiation. Here, we report initial results on the fundamental properties and radiation-induced defects of Be 2 C, focusing on antisites, vacancies, interstitial atoms, and Frenkel pairs in the Be and C sublattices. Using density functional theory (DFT) and ab initio molecular dynamics (AIMD), we calculate the defects formation and binding energies, evaluating their dependence on the supercell size, charge states, and chemical environment. In general, carbon defects exhibit higher formation energies, greater sensitivity to cell size, and stronger impacts on the density of states compared to beryllium defects, with charged state the effects being more pronounced. Static DFT reveals multiple metastable interstitial configurations, while AIMD identifies ground states as C-C <100> dumbbells and octahedral Be interstitials. In conclusion, the diversity of metastable configurations and defect states complicates the diffusion mechanisms, requiring further molecular dynamics analysis to elucidate the mechanisms and rates of radiation-induced atomic transport, as well as the structural stability of Be2C.

Ab initio modeling↗
DOE OSTI2025

Spinel-Structured High Entropy Oxides: Low Temperature Synthesis, Characterization, and Potential Applications

High entropy oxides (HEOs) have recently attracted increasing attention due to their remarkable properties and relatively low cost. Herein we report a simple, highly scalable, and low temperature method for synthesizing spinel (FeNiCoCuZn) 3 O 4 (HEO). We heated an aqueous solution containing divalent cations in high alkali environments to temperatures of 25 - 95 °C for 24 h under atmospheric pressure. The HEO, synthesized at 95 °C for 24 h in 1 M KOH, was paramagnetic at room temperature, with a magnetic mass susceptibility of χ = (7.5 ± 0.2) × 10 –7 m 3 ·kg –1 . It demonstrated stable electrochemical lithium storage performance, with a gravimetric capacity of ∼300 mAh·g –1 at 100 mA·g –1 . It was also active in the electrocatalytic oxygen evolution reaction with an overpotential of 460 mV in alkaline media. The band gap energies were in the range of 2.4 eV. Our advancement in the synthesis and processing of transition metal-based HEOs will undoubtedly render them a viable solution for next generation materials for energy production and storage.

diffraction↗
DOE OSTI2022

Microstructure, compression properties, and oxidation behavior of Hf-25Ta-5Me alloys (Me is Mo, Nb, W, 0.5Mo + 0.5 W, Cr, or Zr)

Hf–Ta based alloys have recently been investigated as potential candidates for high-temperature structural applications. While most attentions have been given to the properties above ~1200 °C where the alloys are mainly single-phase BCC structures and have excellent oxidation performance due to formation of super-oxides, structural properties at lower temperatures are equally important for applications in which an alloy may experience a range of temperatures. In the present work, microstructure, phase composition, mechanical properties and oxidation behavior of six Hf-25Ta-5Me alloys (Me is Mo (HTM alloy), W (HTW), 0.5Mo + 0.5 W (HTMW), Cr (HTC) or Zr (HTZ), the compositions are in at.%) are reported at temperatures below the eutectoid transformation. The alloys were prepared by arc melting followed by hot isostatic pressing for 3 h at 1400 °C and 207 MPa. All the alloys display coarse grains of partially or fully transformed (by a eutectoid reaction) high-temperature BCC phase. The eutectoid regions consist of fine lamellae of Hf-rich HCP and Ta-rich BCC phases. The ternary alloys containing W or Cr also contained small amounts of a cubic Laves phase. At 25 °C, the HTW alloy was the strongest (yield stress σ y = 1966 MPa) but brittle and HTZ was the weakest (σ y = 1120 MPa) but ductile among the studied alloys. Other alloys showed intermediate behaviors. In general, the room temperature ductility of the alloys increased with decreasing σy. All alloys maintained high strength up to 800 °C, but displayed a noticeable strength decrease at 1000 °C. At 1000 °C, HTMW was the strongest alloy (σ y = 468 MPa) and HTC was the weakest alloy (σ y = 368 MPa). All alloys had excellent deformability at 1000 °C. Oxidation behavior of the alloys was studied at 800 °C and 1000 °C and compared with that of Hf–27Ta binary alloy. Although the ternary additions improved oxidation resistance, overall oxidation performance of the studied alloys at 800 °C and 1000 °C was poor.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Draft ASME Boiler and Pressure Vessel Code Cases and Technical Bases for Use of Alloy 617 for Constructions of Nuclear Component Under Section III, Division 5

The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code currently only allows five materials for use in construction of nuclear components for high temperature service. These are: 2.25Cr-1Mo and V-modified 9Cr-1Mo steels, Types 304 and 316 stainless steels and the high nickel Alloy 800H. Since 2005, the US high temperature gas-cooled reactor program has been characterizing elevated temperature mechanical properties of Alloy 617 as the leading candidate construction material for the intermediate heat exchanger. After analysis of these experimental results, along with historical data and additional results available through the Generation IV International Forum, Very High Temperature Reactor, Materials Program Management Board Materials Handbook, a draft ASME Code Case to allow nuclear construction with Alloy 617 for temperatures up to 1750°F (954°C) has been developed. This report contains the Code Case for Low Temperature Service Construction of Section III, Division 5, Subsection HB, Subpart A, Class A and Subsection HC, Subpart A, Class B components, which has been approved in Section II, Materials, and Section III, Rules for Construction of Nuclear Facility Components. Supporting technical justification for the low temperature Code Case is also included. This Code Case allows use of Alloy 617 up to 800°F (425°C). This report also contains an updated draft of a Section III, Division 5, Subsection HB, Subpart B, Class A Code Case for Alloy 617 to qualify it for use in construction of nuclear components up to 1750°F (954°C) for service life up to 100,000 hours. The draft contained in Appendix 4, subject to editorial revision and approval by the ASME Special Task Group on Alloy 617 Code Qualification, will be submitted for approval by letter ballot by the appropriate ASME Committees. The technical justification supporting the Code Case is presented in Appendix 5 of this report. This background document is part of the information package that will be submitted with the Code Case for ballot.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Progress Towards a Titanium-Zirconium-Molybdenum Alloy Coreblock Prototype Using Powder Bed Fusion

Microreactor designs make use of a coreblock for structural stability allowing for these devices to provide powder generation while being portable and inherently safe. In order to maximize energy output of the microreactors, materials must be able to withstand high temperature without melting and without substantial decreases in mechanical properties. As simultaneous projects looking at steels, graphite, and other materials are on-going, this work package will investigate titanium – zirconium – molybdenum alloy (TZM) as it allows for potentially higher microreactor operating temperatures than traditional reactor materials such as stainless steel. Notably, this alloy was developed in the 1960s for use in rockets and has a very high melting point (2623°C) but is difficult to form, machine and join. With limited needs in aerospace, literature is appropriately sparce in looking at the AM of TZM (examples include [1,2]). However, the properties appear to be an excellent match for the needs of the microreactor coreblock leading to the current project. In addition, small washers form the bulk of TZM parts needed in aerospace while the microreactor community was looking at larger, more complex parts. Therefore, AM of TZM is being explored to enable near – net shape of components with the needed complexity to impact the nuclear energy field.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chalcogenide Glass-Capped Fiber-Optic Sensor for Real-Time Temperature Monitoring in Extreme Environments

We demonstrate a novel chalcogenide glass (ChG)-capped optical fiber temperature sensor capable of operating within harsh environment. The sensor architecture utilizes the heat-induced phase change (amorphous-to-crystalline) property of ChGs, which rapidly (80–100 ns) changes the optical properties of the material. The sensor response to temperature variation around the phase change of the ChG cap at the tip of the fiber provides abrupt changes in the reflected power intensity. This temperature is indicative of the temperature at the sensing node. We present the sensing performance of six different compositions of ChGs and a method to interpret the temperature profile between 440 °C and 600 °C in real-time using an array structure. The unique radiation-hardness property of ChGs makes the devices compatible with high-temperature and high-radiation environments, such as monitoring the cladding temperature of Light Water (LWR) or Sodium-cooled Fast (SFR) reactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Embedded High-Temperature Sensors: Enhancing Thermoelectrical Performance with Refractory Composites Gradient Layers

To monitor the stability of various energy and manufacturing systems, sensors capable of operating at temperatures exceeding 1000 °C in diverse environments for extended durations are essential. However, under harsh conditions, degradation of sensing materials is a concern that can be controlled by embedding the sensors into refractory oxides. Doped-LaCrO3 based composites are excellent candidates for high-temperature sensing applications due to their good thermoelectrical properties. However, chemical reactivity between the conductive phase and the refractory oxides can decrease the performance of the sensors. In this work, it was devised gradient-type protective layers safeguarding conductive phases within embedded thermocouples, which were fabricated and characterized by X-Ray Diffraction for phase development analysis, Scanning Electron Microscopy and Energy-dispersive X-ray spectroscopy for microstructure and cationic interdiffusion kinetics, long-term thermoelectric testing was completed up to 1400 °C. The enhanced performance of these novel sensors addresses a critical limitation, rendering them viable for long-term high-temperature applications.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Microstructure and Mechanical Properties of Ni-Based Superalloy Nimonic 105 with Varying Carbon Content

High carbon levels have been found to improve the fabricability of high-strength cast and wrought Ni-based superalloys, enabling the development of superior cast/wrought materials. However, carbon also strongly influences the microstructure and mechanical properties of the alloys. Nimonic 105 variants with three different carbon concentrations were manufactured. A bimodal grain size was found in the intermediate carbon content variant, while the high (low) carbon resulted in fine (coarse) grains thereby significantly affecting creep performance. The variations in grain structure were attributed to the primary carbides. An intermediate carbon level showed the best combination of strength and ductility in tension at high-temperature but little improvement in, or even inferior, creep performance. Discussion of the results will establish an understanding of the influence of carbon on the microstructure and mechanical properties of high strength cast and wrought superalloys, providing insights into obtaining high-quality alloys for future high-temperature applications.

Fang, Xiaotian↗
DOE OSTI2024

NiGa 2 O 4 interfacial layers in NiO/Ga 2 O 3 heterojunction diodes at high temperature

NiO/Ga 2 O 3 heterojunction diodes have attracted attention for high-power applications, but their high temperature performance and reliability remain underexplored. Here, we report the time evolution of the electrical properties in the widely studied p-NiO/n-Ga 2 O 3 heterojunction diodes and formation of NiGa 2 O 4 interfacial layers at high temperatures. Results of our thermal cycling experiment show an initial leakage current increase which stabilizes after sustained thermal load, due to reactions at the NiO–Ga 2 O 3 interface. High-resolution TEM microstructure analysis of the devices after thermal cycling indicates that the NiO–Ga 2 O 3 interface forms a ternary compound at high temperatures, and thermodynamic calculations suggest the formation of the spinel NiGa 2 O 4 layer between NiO and Ga 2 O 3 . First-principles defect calculations find that NiGa 2 O 4 shows low p-type intrinsic doping and hence can serve to limit electric field crowding at the interface. Vertical NiO/ Ga 2 O 3 diodes with intentionally grown 5 nm thin spinel-type NiGa 2 O 4 interfacial layers show an excellent device ON/OFF ratio of >10 10 (± 3 V), V ON of ~1.9 V, and increased breakdown voltage of ~1.2 kV for an initial unoptimized 300 lm diameter device. These p–n heterojunction diodes are promising for high-voltage, high temperature applications.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Thermally stable and self-healable lignin-based polyester

The increased use of plastics and the associated environmental impact has catalyzed research on the development of bio-derived polymers. Bio-based polyesters have gained increased attention due to the abundance of their starting materials and ease of processing. Lignin is naturally occurring in biomass with rich carbon content, whose functionality and rigidity make it an ideal bio-derived candidate for bio-based polyesters. Herein, a lignin-based polyester with good thermal stability and self-repairability was synthesized from carboxylated lignin and epoxidized soybean oil. The synthesized lignin/epoxidized soybean oil (ESO) vitrimer was brittle such that its mechanical performance could not be recorded. However, when polyethylene glycol (PEG) was incorporated as a plasticizer, polymer samples exhibited acceptable ductility. From thermomechanical analysis of the synthesized polyesters, the plasticizer did not impair thermal stability of polymers, but greatly enhanced mechanical properties. Notably, all samples exhibited stability at high temperatures, and good glass transition temperatures (51.0 ± 0.9–78.0 ± 1.2 °C). The highest tensile strength (3.983 ± 0.1 MPa) and storage modulus (1463.67 ± 12.6 MPa) were recorded for the polyester containing 6 % w/w PEG. Moreover, the polymer samples exhibited self-healing capability at 180 °C. This work expands on valorization of lignin through the synthesis of bio-derived materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular dynamics simulation of metallic Al–Ce liquids using a neural network machine learning interatomic potential

Al-rich Al-Ce alloys have the possibility of replacing heavier steel and cast-irons for use in high-temperature applications. Knowledge about the structures and properties of Al-Ce alloys at liquid state is vital for optimizing the manufacture process to produce desired allows. However, reliable molecular dynamics simulation of Al-Ce alloy systems remains a great challenge due to the lack of accurate Al-Ce interatomic potential. In this work, an artificial neural network (ANN) deep machine learning (ML) method is used to develop a reliable interatomic potential for Al-Ce alloy. Ab initio molecular dynamics (AIMD) simulation data on Al-Ce liquid with small unit cell (~200 atoms) and on the known Al-Ce crystalline compounds are collected to train the interatomic potential using ANN-ML. The obtained ANN-ML model reproduces well the energies, forces, and atomic structure of Al 90 Ce 10 liquid and crystalline phases of Al-Ce compounds in comparison with ab initio results. The developed ANN-ML potential is applied in molecular dynamics simulations to study the structures and properties of metallic Al 90 Ce 10 liquid, which would provide useful insight for guiding experimental process to produce desired Al-Ce allows.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Fabrication of UN-Mo CERMET Nuclear Fuel Using Advanced Manufacturing Techniques

Ceramic-metallic nuclear fuels are a candidate fuel for nuclear thermal propulsion systems due to their high heat transport properties, which are necessary in very high-temperature environments. The conventional fabrication of uranium nitride–molybdenum fuel has been thoroughly studied in the past, but modern manufacturing techniques have presented a unique opportunity for further development within this field. This work demonstrates the use of advanced manufacturing techniques to produce nuclear fuel pellets composed of uranium nitride microspheres encased in a molybdenum matrix. Binder jetting is used to print molybdenum disks that are filled with uranium nitride microspheres and afterward sintered using spark plasma sintering. Two fuel pellets were fabricated to demonstrate the methodology and to provide a baseline analysis of the effects of temperature and pressure processing conditions. Characterization of the sintered fuel pellets includes detailed microstructural analysis and thermal conductivity measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Material and component developments for the DEMO divertor using fibre reinforcement and additive manufacturing

Within the research along the European Fusion Roadmap, water-cooled divertor PFCs are foreseen in the design of a first fusion demonstration power plant (DEMO) in order to provide reliable heat removal capability. In the frame of this concerted attempt, the Max Planck Institute for Plasma Physics is concentrating on the development and testing of composite materials based on tungsten (W, preferred armour material) and copper (Cu, preferred heat sink material). W fibres (W f ) as monofilaments and yarns as reinforcement play a central role in these investigations due to their extraordinary properties concerning ductility already at room temperature and high tensile strength. Recent investigations on the impact of radiation damage suggest that the fibres retain their ductility upon irradiation. W reinforced with W fibres (W f /W) allows to overcome the intrinsic brittleness of W. Quantitative mechanical fracture tests of W f /W confirm the basic mechanisms of fibre reinforcement and the increased resistance to mechanical fatigue. The good wettability of W with liquid Cu and the absence of any metallurgical solubility make up an ideal material pairing for composite production. W fibre-reinforced Cu (W f /Cu) cooling tubes provide a rather high thermal conductivity (> 250 W mK -1 ) and at least twice the strength of CuCrZr in hoop direction in the temperature range up to at least 500 °C. Very recent neutron irradiation experiments confirm the sustainment of ductility of the W f /Cu composite. Numerical simulations suggest that thermal stresses in W-Cu PFCs could be strongly reduced by tailoring the local W and Cu volume fraction. This 'freely' distributed material composition can be achieved by means of additively manufactured W skeletons consecutively infiltrated by Cu. Investigations with W preforms produced by Laser Beam Powder Bed Fusion and infiltrated by Cu demonstrate the feasibility of this approach while testing of specifically prepared specimen is ongoing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Suppression of the valence transition in solution-grown single crystals of Eu 2 Pt 6 Al 15

Here, the study of Eu intermetallic compounds has allowed the exploration of valence fluctuations and transitions in 4⁢𝑓 electron systems. Recently, a Eu 2 ⁢Pt 6 ⁢Al 15 phase synthesized by arc-melting followed by a thermal treatment was reported M. Radzieowski et al. [J. Am. Chem. Soc. 140, 8950 (2018)], which undergoes a transition upon cooling below 45 K that was interpreted as a valence transition from Eu 2+ to Eu 3+ . In this paper, we present the discovery of another polymorph of Eu 2 ⁢Pt 6 ⁢Al 15 obtained by high temperature solution growth, which presents different physical properties than the arc-melted polycrystalline sample. Despite the similarities in crystal structure and chemical composition, the Eu valence transition is almost fully suppressed in the solution-grown crystals, allowing the moments associated with the Eu 2+ state to order antiferromagnetically at around 14 K. A detailed analysis of the crystal structure using single crystal x-ray diffraction reveals that, although the solution grown crystals are built from the same constituent layers as the arc-melted samples, these layers present a different stacking. The effect of different thermal treatments is also studied. Different anneal procedures did not result in significant changes in the intrinsic properties, and only by arc-melting and quenching the crystals we were able to convert them into the previously reported polymorph.

Schmidt, Juan [Ames Laboratory, and Iowa State Uni↗
DOE OSTI2025

Carrier Localization and Spontaneous Formation of Two-Dimensional Polarization Domain in Halide Perovskites

Halide perovskites are known for their rich phase diagram and superior performance in diverse optoelectronics applications. The latter property is often attributed to the long electron-hole recombination time, whose underlying physical mechanism has been a long-standing controversy. In this Letter, we investigate the transport and localization properties of electron and hole carriers in a prototypical halide perovskite (CsPbBr 3 ), through ab initio tight-binding nonadiabatic dynamics approach for large-scale (tens of nm size) supercell calculations, to simulate electron and ion dynamics on the same footing. Here, we found distinct structural, lattice polarization, and electron-phonon coupling properties at low (below 100 K) and high temperatures, consistent with experimental observations. In particular, at low temperature we find spontaneous formation of polar grain boundaries in the nonpolar bulk systems, which result in two-dimensional polarization patterns that serve to localize and separate electrons and holes. We reveal phonon-assisted variable-range hopping mostly responsible for low-temperature transport, and their characteristic frequency correlates with temperature-dependent phonon power spectrum and energy oscillation frequency in nonadiabatic dynamics. We answer the critical questions of long electron-hole recombination lifetime at low temperature and offer the correlation among polarization domains, electron-phonon couplings, and photocarrier dynamics.

Carrier generation & recombination↗
DOE OSTI2024

Evidence of ordering in Cu-Ni alloys from experimental electronic entropy measurements

Phase diagrams exhibiting extended solid-solution and lenslike melting are often reproduced using ideal solutions, where ideal mixing considers a fully random configurational entropy of mixing. In the field of irreversible thermodynamics, experimental measurements of the composition variation of high-temperature electronic transport and molten-state properties suggest, however, a strong role for short-range atomic ordering in these systems. Herein, measurements of the thermopower and resistivity are reported for Cu-Ni solid solutions as a function of temperature and composition. The electronic transport properties were interpreted with an irreversible thermodynamic framework, revealing a large electronic contribution to the entropy of mixing. By considering a cluster model for the configurational entropy that uses the electronic contribution to inform the existence of ordered associates, we rationalize such a contribution of the electronic entropy with the ideal entropy of mixing commonly used to model such systems. In conclusion, these results suggest that the short-range order of the atoms plays a significant role in both solid and liquid states, even when there are no dominant intermetallic compounds in these alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Experimentally Driven Automated Machine-Learned Interatomic Potential for a Refractory Oxide

Understanding the structure and properties of refractory oxides is critical for high temperature applications. In this work, a combined experimental and simulation approach uses an automated closed loop via an active learner, which is initialized by x-ray and neutron diffraction measurements, and sequentially improves a machine-learning model until the experimentally predetermined phase space is covered. Furthermore, a multiphase potential is generated for a canonical example of the archetypal refractory oxide, HfO 2 , by drawing a minimum number of training configurations from room temperature to the liquid state at similar to 2900 degrees C. The method significantly reduces model development time and human effort.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗