Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYPOTHESIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Hexamethyldisiloxane pyrolysis: probing H-atom initiation by femtosecond two-photon LIF

Previous experiments have led to the hypothesis that pyrolysis of silica nanoparticle precursors carried in an inert central gas jet surrounded by a laminar flame is initiated not by thermal decomposition (the measured jet temperatures are too low for pyrolysis), but by reactions with H-atoms diffusing from the surrounding flame into the jet. The current work tests this hypothesis using femtosecond two-photon laser-induced fluorescence (fs-TPLIF) to image H-atom concentrations in the same flame configuration as the previous experiments. Methane flames (ϕ = 0.83, 1.01 and 1.13) were generated using a multi-element diffusion (Hencken) burner equipped with a central tube through which the N2 jet was introduced. The fs-TPLIF line imaging showed significant concentrations of H-atoms in the nitrogen jets at heights above the burner (HAB) close to the methane flame front. The measurements indicate radial diffusion of the H atoms from the flame to the jet is significant. The H-atom concentrations in the jet increased with increasing stoichiometry of the methane flame. Additional experiments were performed with hexamethyldisiloxane entrained in the central jet flow. In each case, a diffusion flame producing silica nanoparticles was established at the boundaries between the central jet and the methane flames. The 2D H-atom images showed a transition from over-ventilated diffusion flames to under-ventilated diffusion flames with increasing equivalence ratio. Furthermore, the fs-TPLIF profiles show a significant production of H-atoms within the jet when the surrounding flame is lean. This knowledge contributes to a deeper understanding of the underlying mechanisms governing these synthesis flame systems and opens avenues for advancing silica nanoparticle synthesis techniques.

Kim, Keunsoo↗
DOE OSTI2020

Design of materials with supramolecular polymers

One hundred years ago Hermann Staudinger was strongly criticized by his scientific peers for his macromolecular hypothesis, but today it is hard to imagine a world without polymers. His hypothesis described polymers as macromolecules composed of large numbers of structural units connected by covalent bonds. In the 1990s the concept of supramolecular polymers emerged in the scientific literature as discrete entities of large molar mass comparable to that of classical polymers but built through non-covalent bonds among monomers. Supramolecular polymers exist in biological systems, and potentially blend the physical properties of covalent polymers with unique features such as high degrees of internal order within the polymeric structure, defined shapes, and novel dynamics. This trend article provides a summary of seminal contributions in supramolecular polymerization and provides recent examples from the Stupp laboratory to demonstrate the potential applications of an exciting class of materials composed fully or partially of supramolecular polymers. Finally, in closing, we provide our perspective on future opportunities provided by this field at the onset of a second century of polymers. It is our objective here to demonstrate that this second century could be as prosperous, if not more so, than the preceding one.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microbial potentiometric sensor: A new approach to longstanding challenges

The underlying hypothesis of this study is that simple potentiometric measurements between sensing electrodes and a shared reference electrode - Microbial Potentiometric Sesnor (MPS) system - can be employed in a long-term, continuous mode of operation to resolve the spatial and temporal changes in environmental systems. To address the hypothesis, (1) a conceptual description of the MPS system and its postulated principle of operation are provided; (2) the MPS system performance is documented under controlled laboratory conditions; and (3) the capabilities of the MPS system are documented under quiescent and dynamic field condition. In a laboratory setting, the variability among different MPS signals was insignificant confirming the postulated high accuracy and reproducibility of the sensor performance. It also demonstrated statistically significant correlations with dissolved oxygen (DO) and oxidation-reduction potential (ORP) sensors, while showing capabilities of operating under anoxic and anaerobic conditions. Regardless of their locations in the model wetland system, three MPS sensors functioned without interruption and cleaning for a period >2 years, and thus demonstrating long-term durability of the MPS technology. In real batch-wastewater treatment facility, the deployed MPS system signals were able to describe the organic carbon trends and correlate with each treatment phase in a cycle. Data reproducibility and reliability exceeded the expectations better describing the carbon treatment levels than the DO and ORP sensors (p < 4.4 × 10 –162 vs phase adjusted p < 3.0 × 10 –58 ). While MPS signals correlate with specific parameters that describe the local process or environments, it is more prudent to employ both the magnitude and pattern of a composite signal like the MPS signal describe the change to reflect any shift in the local environment. Finally, when compared to a baseline pattern, this change in signal magnitude and pattern reveals important information that can be employed to tailor and optimize any condition or process which involves microorganisms.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Real-time monitoring and prediction of water quality parameters and algae concentrations using microbial potentiometric sensor signals and machine learning tools

We report the overarching hypothesis of this study was that temporal microbial potentiometric sensor (MPS) signal patterns could be used to predict changes in commonly monitored water quality parameters by using artificial intelligence/machine learning tools. To test this hypothesis, the study first examines a proof of concept by correlating between MPS's signals and high algae concentrations in an algal cultivation pond. Then, the study expanded upon these findings and examined if multiple water quality parameters could be predicted in real surface waters, like irrigation canals. Signals generated between the MPS sensors and other water quality sensors maintained by an Arizona utility company, including algae and chlorophyll, were collected in real time at time intervals of 30 min over a period of 9 months. Data from the MPS system and data collected by the utility company were used to train the ML/AI algorithms and compare the predicted with actual water quality parameters and algae concentrations. Based on the composite signal obtained from the MPS, the ML/AI was used to predict the canal surface water's turbidity, conductivity, chlorophyll, and blue-green algae (BGA), dissolved oxygen (DO), and pH, and predicted values were compared to the measured values. Initial testing in the algal cultivation pond revealed a strong linear correlation (R 2 = 0.87) between mixed liquor suspended solids (MLSS) and the MPSs' composite signals. The Normalized Root Mean Square Error (NRMSE) between the predicted values and measured values were <6.5%, except for the DO, which was 10.45%. The results demonstrate the usefulness of MPSs to predict key surface water quality parameters through a single composite signal, when the ML/AI tools are used conjunctively to disaggregate these signal components. The maintenance-free MPS offers a novel and cost-effective approach to monitor numerous water quality parameters at once with relatively high accuracy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The role of peer review and science for advancing public understanding

We live in a time of rapid change. The Covid-19 pandemic has united the world to understand and develop solutions to protect the health and wellbeing of society. At the same time, access to information on the internet and social media has exploded. People are exposed to information with many claims. Some of the information is relevant and accurate. A significant fraction may be inaccurate, biased, and potentially dangerous. With Covid-19, the information might point to cures that are toxic or risks that are not relevant. The scientific community has developed a process to develop and convey knowledge. The validation of results and their interpretation is critical to advancing knowledge. The core of the scientific process is based on developing a hypothesis-driven concept, designing and executing an experimental approach to prove or disprove the hypothesis, conducting a statistical analysis of the results to confirm their validity, and interpreting their meaning and impact. When their work is completed the scientist prepares to publish the work. Publication requires peer review. Hypotheses, experimental approaches, results, and interpretation of results are independently and anonymously reviewed by a scientific peer. The reviewers are selected based on their expertise in the field. The peer review process is essential for the integrity of the scientific process. Without a robust scientific process, society cannot discriminate between validated results and interpretations and biased, inaccurate, and potentially dangerous conjecture. With inaccurate science society and policy makers may make poor decisions that could hurt people and the world around them. While scientists should not censor information available to the public, scientists have a responsibility to inform the public. We must articulate what the scientific process is and why it is essential when considering the validity of information. Scientist are responsible for pointing out when public information has not been vetted through a scientific process and therefore cannot be considered conclusive. Scientists are responsible for highlighting information that has been generated and vetted with the scientific process. Over time, our goal is for the public to value the scientific process based on peer review. The public could become enlightened to the necessity for peer review to support decisions and action. Scientists need to contribute to advancing public knowledge. When invited to serve as a peer reviewer, scientists have a responsibility to contribute to the process. We all are extremely busy making peer review a distraction. While peer review does not directly benefit our own work and career, it benefits our chosen field of science. This is very important for the research area that our journal, Water-Energy Nexus, is focusing on. We cover the convergence of science and technology integrating across large spatial ranges (micro to global) in environmental pollution and the balance of remediation issues with energy use. Water-Energy Nexus wants to provide scientists with a platform for scientific debate and discussion on this rich and complicated topic. With the manuscripts submitted to WEN cover integrated research topics across a broad range of subjects from environment sciences through energy engineering, the role of peer review is essential. Peer review on a new submission to WEN should not be biased towards a specific science field. It should be done considering the complex nature of issues in the water-energy nexus. Scientists need to contribute to the public dialog. To accomplish these goals, we need to be honest, accurate, articulate, and use understandable language. The impact of WEN is very diverse affecting society in many ways. The scientific audience for WEN is diverse and readers may not fully understand the content of the papers outside their research expertise. Therefore, scientists, especially those who want to contribute to WEN, should work with communications specialists to convey message to benefit society. The audience includes the general public and researchers outside the author’s core specialty. While the peer-reviewed journal article is the cornerstone of our careers and critical for advancing scientific knowledge, a general interest story could benefit society even more. The author cannot lose sight that our work has two audiences, the science community, and more importantly, our family, friends, neighbors, and policy makers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Comment on Improved CO 2 Hydrogenation on Ni–ZnO/MCM-41 Catalysts with Cooperative Ni and ZnO Sites

A recent publication from Murthy et al.1 describes experiments in which they proposed the hypothesis that a bifunctional catalyst consisting of adlineated,2 nanometer-sized domains of Ni and ZnO, confined within the pores of MCM-41, hydrogenates carbon dioxide adsorbed on the ZnO using hydrogen atoms produced by the Ni-catalyzed dissociation of H2. The reanalysis of their data presented below suggests that the reaction rates they employed to test their hypothesis, when properly normalized, show little to no effect of bifunctionality. This closer inspection of their data raises the possibility that the observed effects may instead arise from experimental artifacts (e.g., different levels of conversion, finite rates of mass transport) or morphological correlations that were not considered by the authors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Root carbon interation with soil minerals is dynamic, leaving a legacy of microbially derived residues

Minerals preserve the oldest most persistent soil carbon, and mineral characteristics appear to play a critical role in the formation of soil organic matter (SOM) associations. To test the hypothesis that carbon source and soil microorganisms also influence mineral-SOM associations, we incubated permeable minerals bags in soil microcosms with and without plants, in a 13CO2 labelling chamber. Mineral bags contained quartz, ferrihydrite, kaolinite, or native soil minerals isolated via density separation. Using 13C-NMR, FTICR-MS, and lipidomics, we traced plant-derived carbon onto minerals harvested from microcosms at three plant growth stages, characterizing total carbon, 13C enrichment, and SOM chemistry. While C accumulation was rapid and mineral-dependent, the accumulated amount was not significantly affected by the presence of plant roots. However, the rhizosphere did shape the chemistry of mineral-associated SOM. Minerals incubated in the rhizosphere were associated with a more diverse array of compounds with different C functional groups (carbonyl, aromatics, carbohydrates, lipids) than minerals incubated in a bulk soil control. These diverse rhizosphere-derived compounds may represent a “transient fraction” of mineral SOM, rapidly exchanging with mineral surfaces. Our results also suggest that many of the lipids which persist on minerals are microbially-derived with a large fraction of fungal lipids.

Rhizosphere, soil organic matter, grassland, 13C-N↗
DOE OSTI2021

Pretreatment of Biomass by Selected Type-III Deep Eutectic Solvents and Evaluation of the Pretreatment Effects on Hydrothermal Carbonization

Hydrothermal carbonization (HTC) is a novel thermochemical conversion that converts wet biomass into energy dense solid fuel. Residual moisture under subcritical conditions reacts with a lignin-cellulose-hemicellulose matrix with the major reactions being identified as dehydration and decarboxylation. Among other reaction parameters (e.g., temperature, time, pressure), biomass morphology often plays a key role in HTC. The hypothesis of this study was enhancing the porous structure of biomass without significantly affecting biopolymer composition would augment hydrothermal carbonization (HTC). To prove the hypothesis, two type-III deep eutectic solvents (DESs), namely choline chloride:urea (ChCl:Urea, 1:2 mol/mol) and methyltriphenylphosphonium bromide:ethylene glycol (MTPB:EG, 1:4 mol/mol), were studied to pretreat loblolly pine at room temperature and ambient pressure for 1 h. DES pretreatment shows swelling of the biomass, increasing the surface fiber-to-fiber gap length by 52% and 185% for ChCl:Urea and MPTB:EG pretreatments, respectively. The total pore volume remained intact (2.6 × 10 –3 cm 3 /g), although new small pores evolved, and existing pores were abated with DES pretreatment. Hydrochars prepared from DES pretreated loblolly pine showed a high O/C and H/C ratio resulting in a significant increase of energy content (up to 42%) and a decrease of mass yield (up to 50 wt %), indicating an enhancement of HTC severity due to the alteration of surface morphology by DES. Finally, a preliminary process economics revealed that integrated DES pretreatment-HTC would increase fixed capital investment but decrease the cost of operation and manufacturing than the standalone HTC process.

09 BIOMASS FUELS↗
DOE OSTI2020

Minimal Experimental Bias on the Hydrogen Bond Greatly Improves Ab Initio Molecular Dynamics Simulations of Water

Experiment Directed Simulations (EDS) is a method within a class of techniques seeking to improve molecular simulations by minimally biasing the system Hamiltonian to reproduce certain experimental observables. In a previous application of EDS to ab initio molecular dynamics (AIMD) simulation based on electronic density functional theory (DFT), the AIMD simulations of water were biased to reproduce its experimentally derived solvation structure. In particular, by solely biasing the O-O pair correlation functions, other structural and dynamical properties that were not biased were improved. In this work, the hypothesis is tested that directly biasing the OH pair correlation (and hence the H-O∙∙∙H hydrogen bonding), will provide an even better improvement of DFT-based water properties in AIMD simulations. The logic behind this hypothesis is that for most electronic DFT descriptions of water the hydrogen bonding is known to be deficient due to anomalous charge transfer and over polarization in the DFT. Using recent advances to the EDS learning algorithm, we thus train a minimal bias on AIMD water that reproduces the O-H radial distribution function derived from the highly accurate MB-pol model of water. Finally, it is then confirmed that biasing the O-H pair correlation alone can lead to improved AIMD water properties, with structural and dynamical properties in even closer to experiment than the previous EDS-AIMD model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Quantifying Membrane Structure and Dynamics during Bioproduct Production in Zymomonas mobilis by Molecular Simulation

The conversion of lignocellulosic biomass into biofuels and bioproducts by microbial biorefineries is central to a sustainable chemical industry. Zymomonas mobilis is one such biorefinery chassis and is resistant to ethanol stress, leading to its use in biomass conversion to biofuels and bioproducts. However, Z. mobilis growth is often inhibited by organic acids, aldehydes, alcohols, ketones, and amides found in biomass hydrolysate. The resulting slow growth inhibits production and as a result drives up the price for the resulting products. One hypothesis is that these molecules interact with or disrupt the bacterial membrane, triggering stress responses and hindering growth. To test this hypothesis at the molecular level, we employ all-atom molecular dynamics (MD) simulations to investigate lignocellulose-derived small molecules and their impact on a biologically relevant Z. mobilis membrane model. Simulations were conducted across a range of inhibitor concentrations from 0 to 2.5 mol %, analyzing key membrane properties such as area per lipid (APL), membrane thickness, lipid-order parameter (−S CH ), lateral diffusion coefficient (D xy ), and permeability coefficient (Pm). From simulation, we observed altered membrane structure and dynamics at these modest small molecule concentrations commonly found in hydrolysates. Generally, the membranes become thinner, with a higher area per lipid and lower-order parameter as the small molecule concentration increases. These trends are stronger for more hydrophobic molecules with greater hydrophobic bulk, as isobutanol, propanol, and propanoic acid showed greater membrane perturbations as the concentration increased compared to other small molecules. Tracking small molecule distributions directly in our equilibrium simulations allows us to determine concentration-dependent free energy profiles for these molecules. While the trends are noisy, generally the barriers to crossing the membrane decrease as the concentration increases, indicating that the membranes become leakier as small molecule concentrations rise. Comparing between native Z. mobilis membranes with hopanoids and membranes sharing the same phospholipid composition but without hopanoids, hopanoids stabilize and order the membrane for smaller molecules to maintain membrane structure but appear insufficient for larger hydrophobic molecules like isobutanol. These findings provide a mechanistic understanding of how small molecules found in biomass degradation streams interact with the Z. mobilis membrane, offering valuable insights for future strain engineering efforts to optimize biofuel and bioproduct synthesis from biomass feedstocks by highlighting limits to small molecule tolerance. This knowledge can guide the modification of membrane composition to develop more robust microbes, thereby improving microbial survival and yields in industrial contexts.

Singh, Nitin Kumar [Michigan State Univ., East Lan↗
DOE OSTI2025

Toward a Better Understanding of Ni Coarsening in Solid Oxide Cells: NiH on Ni (111) Examined Using a Combined Theoretical Approach

The coarsening of the Ni particles in the hydrogen electrode of solid oxide cells (SOCs) is an important degradation mechanism. Here, in this paper, density-functional theory and kinetic Monte Carlo methods are used to explore our recent hypothesis that the surface diffusion of NiH may cause faster Ni coarsening in electrolysis cell mode under an overpotential. Using both methods, the diffusion constant or diffusivity of NiH on Ni (111) is determined as the product of the surface coverage and single-molecule diffusivity for the first time considering all possible diffusion paths. It is then determined versus overpotential at the triple-phase boundary of the hydrogen electrode assuming a typical operating temperature of the SOC. Under a significant overpotential, the diffusivity of NiH is found to be sufficiently large to support the above hypothesis that NiH may promote Ni coarsening. However, based on the adsorption configurations identified, the dissociation and reformation of NiH on Ni (111) could occur. Thus, more work is needed to develop a model of Ni coarsening considering both molecular and dissociated forms of NiH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reagent-Triggered Isomerization of Fluxional Cluster Catalyst via Dynamic Coupling

Metallic cluster catalysts have many thermodynamically accessible isomers with diverse active sites and low reaction barriers, and lately a strong hypothesis emerged that the many catalyst states collectively drive the catalysis. Furthermore, it remained a hypothesis that catalyst isomerization is actually kinetically feasible under the current reaction conditions. Using high-temperature dynamics simulations and sampling, a range of orientations, and vibrational energy distributions, we probe how thermal effects and molecular events affect cluster catalyst dynamics. We show that even such a delicate affair as the dissociation or scattering of a methane molecule on the heavy and thus slow Pt 13 cluster triggers substantial isomerization of the catalyst, far beyond thermal at 700 K. A kinetic coupling between the methane activity and cluster catalyst dynamics is observed. In return, the thermal dynamics of the cluster affects the methane reaction and scattering probabilities. Hence, molecular events at the surfaces of fluxional cluster catalysts should facilitate the population of an ensemble of catalyst states under the current reaction conditions, with implications for available active sites, reaction mechanisms, and apparent rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface-Activated Corrosion in Tin–Lead Halide Perovskite Solar Cells

Mixed tin–lead halide perovskite solar cells have promising power conversion efficiencies, but long-term stability is still a challenge. Here, we examine the stability of a 60:40 tin–lead perovskite to better understand diminished device performance upon thermal treatment, both in ambient and inert atmosphere. Operando X-ray diffraction shows a stable bulk structure of the perovskite absorber, leading to the hypothesis that surface chemistry dominates the degradation mechanism. X-ray photoelectron spectroscopy reveals two new observations post-thermal annealing that accompany previously reported Sn 4+ evolution: (i) the formation of I 3 – intermediates preceding I 2 loss at the surface and (ii) evidence of under-coordinated tin and lead surface sites (Sn δ<2+ and Pb δ<2+ , respectively) in inert and ambient conditions. These two species indicate an activated corrosion (i.e., both oxidation and reduction) process at the surface as a possible chemical pathway for degradation, which is expected to be accelerated under operando voltage and light biases.

14 SOLAR ENERGY↗
DOE OSTI2020

Island Rainfall Enhancement in the Maritime Continent

Abstract The hypothesis that the islands of the Maritime Continent (MC) enhance total rainfall and time‐mean upward motion is tested using a convection‐permitting regional model. Sensitivity experiments with the islands removed greatly diminish both rainfall and upward motion, supporting the hypothesis. We examine the individual factors in this enhancement, isolating the impacts of the diurnal cycle from those of basic‐state (i.e., constant) forcing of orography and the land surface. We find that the basic‐state forcing by land is the only factor that substantially enhances total island rainfall, specifically through the enhancement of mean surface heat fluxes. The diurnal cycle and orographic forcing, however, substantially enhance rainfall in the seas surrounding the islands. Moreover, the diurnal cycle is found to be essential for promoting mesoscale circulations on the spatial scales of the islands, which are critical to both the upscale growth of deep convection and the most extreme rainfall rates.

Ruppert, Jr., James H.↗
DOE OSTI2022

The Relation of Environmental Conditions With Charge Structure in Central Argentina Thunderstorms

In this study we explored the environmental conditions hypothesized to induce a dominant charge structure in thunderstorms in the province of Cordoba, Argentina, during the RELAMPAGO-CACTI (Remote sensing of Electrification, Lightning, And Mesoscale/microscale Processes with Adaptive Ground Observations-Clouds, Aerosols, Complex Terrain Interactions) field campaigns. Hypothesized environmental conditions are thought to be related to small warm cloud residence time and warm rain growth suppression, which lead to high cloud liquid water contents in the mixed-phase zone, contributing to positive charging of graupel and anomalous charge structure storms. Data from radiosondes, a cloud condensation nuclei (CCN) ground-based instrument and reanalysis were used to characterize the proximity inflow air of storms with anomalous and normal charge structures. Consistent with the initial hypothesis, anomalous storms had small warm cloud depth caused by dry low-level humidity and low 0°C height. Anomalous storms were associated with lower CCN concentrations than normal storms, an opposite result to the initial expectation. High CAPE is not an important condition for the development of anomalous storms in Argentina, as no clear pattern could be found among the different parameters calculated for updraft proxy that would be consistent with the initial hypothesis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Giant Cloud Condensation Nuclei Facilitate Drizzle Formation in Stratocumulus—Insights From a Combined Observation‐Modeling Framework

The mechanism for initiating drizzle drop remains a gap in the current understanding of warm rain formation. One prevalent hypothesis suggests that the presence of Giant Cloud Condensation Nuclei (GCCN) generates drizzle‐sized drops necessary to trigger the Collision‐Coalescence (C‐C) process. Here, in this study, this hypothesis is investigated using a novel framework that integrates in situ observations, remote sensing measurements, and idealized models. Results show that GCCN can efficiently generate drizzle drops through condensation, producing a broad Droplet Size Distribution (DSD) comparable to in situ observations. The large drizzle drop and broad DSD strongly facilitate C‐C, further accelerating drizzle initiation. To compare with observation, the model‐generated DSDs are used to generate radar Doppler spectra where radar reflectivity and Doppler skewness is estimated. The simulated radar quantities correspond well with radar observations, providing critical evidence for the GCCN‐induced drizzle initiation mechanism.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

QBO deepens MJO convection

Abstract The underlying mechanism that couples the Quasi-Biennial Oscillation (QBO) and the Madden-Julian oscillation (MJO) has remained elusive, challenging our understanding of both phenomena. A popular hypothesis about the QBO-MJO connection is that the vertical extent of MJO convection is strongly modulated by the QBO. However, this hypothesis has not been verified observationally. Here we show that the cloud-top pressure and brightness temperature of deep convection and anvil clouds are systematically lower in the easterly QBO (EQBO) winters than in the westerly QBO (WQBO) winters, indicating that the vertical growth of deep convective systems within MJO envelopes is facilitated by the EQBO mean state. Moreover, the deeper clouds during EQBO winters are more effective at reducing longwave radiation escaping to space and thereby enhancing longwave cloud-radiative feedback within MJO envelopes. Our results provide robust observational evidence of the enhanced MJO activity during EQBO winters by mean state changes induced by the QBO.

Jin, Daeho (ORCID:0000000343894393)↗
DOE OSTI2025

Search for light sterile neutrinos with two neutrino beams at MicroBooNE

The existence of three distinct neutrino flavours, ν e , ν μ and ν τ , is a central tenet of the Standard Model of particle physics. Quantum-mechanical interference can allow a neutrino of one initial flavour to be detected sometime later as a different flavour, a process called neutrino oscillation. Several anomalous observations inconsistent with this three-flavour picture have motivated the hypothesis that an additional neutrino state exists, which does not interact directly with matter, termed as ‘sterile’ neutrino, ν s . This includes anomalous observations from the Liquid Scintillator Neutrino Detector (LSND)3 experiment and Mini-Booster Neutrino Experiment (MiniBooNE), consistent with ν μ → ν e transitions at a distance inconsistent with the three-neutrino picture. Here we use data obtained from the MicroBooNE liquid-argon time projection chamber in two accelerator neutrino beams to exclude the single light sterile neutrino interpretation of the LSND and MiniBooNE anomalies at the 95% confidence level (CL). Moreover, we rule out a notable portion of the parameter space that could explain the gallium anomaly. This is one of the first measurements to use two accelerator neutrino beams to break a degeneracy between ν e appearance and disappearance, which would otherwise weaken the sensitivity to the sterile neutrino hypothesis. We find no evidence for either ν μ → ν e flavour transitions or ν e disappearance that would indicate non-standard flavour oscillations. Our results indicate that previous anomalous observations consistent with ν μ → ν e transitions cannot be explained by introducing a single sterile neutrino state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗