Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Golden”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Assessment of Potential Impact of Electromagnetic Fields from Undersea Cable on Migratory Fish Behavior

The US Department of Energy and US Department of the Interior, Bureau of Ocean Energy Management commissioned this study to address the limited scientific data on the impacts of high voltage direct current cables on aquatic biota, in particular migratory species within the San Francisco Bay. Empirical evidence exists that marine animals perceive and orient to local distortions in the earth’s main geomagnetic field magnetic field. The electromagnetic fields (EMF) generated by the cables that carry electricity from hydrokinetic energy sources to shore-based power stations may produce similar local distortions in the earth’s main field. Concern exists that animals that migrate along the continental shelves might orient to the EMF from the cables, and move either inshore or offshore away from their normal path. The Trans Bay Cable (TBC) is a ±200-kilovolt (kV), 400 MW 85-km long High Voltage Direct Current (DC) buried transmission line linking Pittsburg, CA with San Francisco, CA (SF) through the San Francisco Bay. The study addresses the following specific questions based on measurements and projections of the EMF produced by an existing marine cable, the TBC, in San Francisco Bay. Specifically, does the presence of EMF from an operating power cable alter the behavior and path of bony fishes and sharks along a migratory corridor? Does the EMF from an operating power cable guide migratory movements or pose an obstacle to movement? To meet the main study objectives several activities needed to be carried out: 1) modeling of the magnetic fields produced by the TBC, 2) assessing the migratory impacts on Chinook salmon smolts (Oncorhynchus tshawytscha) and green sturgeon (Acipenser medirostris) as a result of local magnetic field distortions produced by bridge structures and 3) analyzing behavioral responses by migratory Chinook salmon and green sturgeon to a high-voltage power cable. To meet the first objective, magnetic field measurements were made using two submerged Geometrics magnetometers towed behind a survey vessel in four locations in the San Francisco estuary along profiles crossing the cable path. We applied basic formulas to describe magnetic field from a DC cable summed vectorially with the background geomagnetic field (in the absence of other sources that would perturb the ambient field) to derive characteristics of the cable not immediately or otherwise observable. The magnetic field profiles of 76 survey lines were regressed against the measured fields, representing eight days of measurement. Many profiles were dominated by field distortions caused by bridge structures or other submerged objects, and the cable contribution to the field was not detectable. The regressions based on fundamental principles (Biot Savart law) and the vectorial summation of cable and geomagnetic fields provide estimates of cable characteristics consistent with plausible expectations. For the second objective, detailed gradiometer survey were examined. Distortions in the earth’s main field produced by bridges across the estuary were much greater than those from the TBC. The former anomalies exceeded the latter by an order of magnitude or more. Significant numbers of tagged Chinook salmon smolts migrated past bridges, which produced strong magnetic anomalies, to the Golden Gate Bridge, where they were recorded by dual arrays of acoustic tag-detecting monitors moored in lines across the mouth of the bay. Adult green sturgeon successfully swam upstream and downstream through the estuary on the way to and from their spawning grounds. Hence, the large anomalies produced by the bridges that run perpendicular to these migration routes do not appear to present a strong barrier to the natural seasonal movement patterns of salmonid smolts and adult green sturgeon. Finally, to assess the behavioral responses by migratory Chinook salmon and green sturgeon to a high- voltage power cable - the potential impacts effect of the TBC on fishes migrating through the San Francisco Estuary were examined. These included late-fall run Chinook salmon smolts (Oncorhynchus tshawytscha) that migrate downstream through the San Francisco Estuary to the Pacific Ocean and adult green sturgeon (Acipenser medirostris), which migrate upstream from the ocean through the estuary to their spawning habitat in the upper Sacramento River and return to the ocean after spawning occurs. Our results indicate Chinook salmon smolts may be attracted to the cable after activation (more cable location crossings, more detections at Bay Bridge, high importance of distance to cable in predicting fish location), but are not impeded from successfully migrating through the San Francisco Bay (similar proportions of successful exits, faster transit rates). Cable activity had opposite effects on outbound and inbound green sturgeon migrations: outbound migrations had significantly longer transit times while inbound migrations had significantly shorter migration times. However, the proportion of green sturgeon that successfully migrated through the San Francisco Bay was not strongly impacted after cable activation for either migration type. Based on the work, we provide the following conclusions: 1) calculations of magnetic fields for assessment of marine life can be performed; however, local anomalies in the fields resulting from submerged structures require validation of such calculations through collection of ambient DC magnetic field data, 2) the large anomalies produced by the bridges that run perpendicular to these migration routes do not appear to present a strong barrier to the natural seasonal movement patterns of salmonid smolts and adult green sturgeon and 3) Chinook salmon smolts may be attracted to the activated cable based on analysis of cable crossing, misdirections, and first presence at the array data, however, the cable activation does not appear to change the proportion of smolts that successfully migrate through the San Francisco Bay. Cable activation impacts inbound and outbound migrating adult green sturgeon: travel time was increased for outbound migrations but decreased for inbound migrations. However, cable activation did not appear to impact the success of either migration type in this species.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

NREL Pyrheliometer Comparisons: September 25-October 6, 2017 (NPC-2017)

Accurate measurements of direct normal (beam) solar irradiance from pyrheliometers are important for developing and deploying solar energy conversion systems, improving our understanding of the Earth's energy budget for climate change studies, and for other science and technology applications involving solar flux. Providing these measurements places many demands on the quality system used by the operator of commercially available radiometers. Maintaining accurate radiometer calibrations that are traceable to an international standard is the first step in producing research-quality solar irradiance measurements. In 1977, the World Meteorological Organization (WMO) established the World Radiometric Reference (WRR) as the international standard for the measurement of direct normal solar irradiance (Frohlich 1991). The WRR is an internationally recognized, detector-based measurement standard determined by the collective performance of six electrically self-calibrated absolute cavity radiometers comprising the World Standard Group (WSG). Various countries, including the United States, have contributed these specialized radiometers to the Physikalisch-Meteorologisches Observatorium Davos - World Radiation Center (PMOD/WRC) to establish the WSG. As with all measurement systems, Absolute Cavity Radiometers (ASR) are subject to performance changes over time. Therefore, every five years the PMOD/WRC in Davos, Switzerland, hosts an International Pyrheliometer Comparison (IPC) for transferring the WRR to participating radiometers. NREL has represented the U.S. Department of Energy (DOE) in each IPC since 1980. As a result, NREL has developed and maintained a select group of absolute cavity radiometers with direct calibration traceability to the WRR, and uses these reference instruments to calibrate pyrheliometers and pyranometers using the International Organization for Standardization (ISO) 17025 accredited Broadband Outdoor Radiometer Calibration (BORCAL) process (Reda et al. 2008). National Renewable Energy Laboratory (NREL) pyrheliometer comparisons (NPCs) are held annually at the Solar Radiation Research Laboratory (SRRL) in Golden, Colorado. Open to all ACR owners and operators, each NPC provides an opportunity to determine the unique WRR transfer factor (WRR-TF) for each participating pyrheliometer. By adjusting all subsequent pyrheliometer measurements by the appropriate WRR-TF, the solar irradiance data are traceable to the WRR.

14 SOLAR ENERGY↗

Hyundai FCEV Testing, Data Collection and Validation Fleet

This report summarizes the work conducted under Award Number DE-EE0005970 by Hyundai America Technical Center, Inc. (HATCI) to demonstrate and validate Hyundai Tucson Fuel Cell Electric Vehicles (FCEV) reliability in real world applications. HATCI operated 10 light-duty FCEVs throughout various geographical regions in United States to collect and submit vehicle performance durability data over 5 years. HATCI introduced FCEVs in two phases. First phase deployed 5 vehicles in Southern California to study customer real world usage and prove its reliability under commute and fleet driving pattern from 2013 to 2015. As the hydrogen station infrastructure expanded its network, second phase deployed and operated 5 additional vehicles under various climate zones (hot, cold, high altitude) and validated fuel cell performance from 2016 to 2017. California Air Resources Board (Sacramento, CA), California Fuel Cell Partnership, US Department of Energy (Washington DC), Hyundai Motor America, HATCI (Ann Arbor, Michigan), National Renewable Energy Laboratory (Golden, CO), and South Coast Air Quality Management District were the fleet operators. Four different stack degradation mechanism issues were addressed through validation project: fuel cell stack dry-out, flooding, cathode oxidation, and platinum dissolution. By developing counter-measures to each fuel cell stack degradation mechanism through performance validation fleet, Hyundai was able to successfully develop the next generation fuel cell vehicle NEXO, with longest range, large cost reduction, and best fuel cell powertrain warranty in its class (100,000 miles, 10 years warranty).

08 HYDROGEN↗

NREL Pyrheliometer Comparisons: September 24 - October 5, 2018 (NPC-2018)

Accurate measurements of direct normal (beam) solar irradiance from pyrheliometers are important for developing and deploying solar energy conversion systems, improving our understanding of the Earth's energy budget for climate change studies, and for other science and technology applications involving solar flux. Providing these measurements places many demands on the quality system used by the operator of commercially available radiometers. Maintaining accurate radiometer calibrations that are traceable to an international standard is the first step in producing research-quality solar irradiance measurements. In 1977, the World Meteorological Organization (WMO) established the World Radiometric Reference (WRR) as the international standard for the measurement of direct normal solar irradiance (Frohlich 1991). The WRR is an internationally recognized, detector-based measurement standard determined by the collective performance of six electrically self-calibrated absolute cavity radiometers comprising the World Standard Group (WSG). Various countries, including the United States, have contributed these specialized radiometers to the Physikalisch-Meteorologisches Observatorium Davos - World Radiation Center (PMOD/WRC) to establish the WSG. As with all measurement systems, Absolute Cavity Radiometers (ASR) are subject to performance changes over time. Therefore, PMOD/WRC in Davos, Switzerland, hosts an International Pyrheliometer Comparison (IPC) for transferring the WRR to participating radiometers quinquennialy by invitation. NREL has represented the U.S. Department of Energy (DOE) in each IPC since 1980. As a result, NREL has developed and maintained a select group of absolute cavity radiometers with direct calibration traceability to the WRR, and uses these reference instruments to calibrate pyrheliometers and pyranometers using the International Organization for Standardization (ISO) 17025 accredited Broadband Outdoor Radiometer Calibration (BORCAL) process (Reda et al. 2008). To fill the gap between each IPC, NREL pyrheliometer comparisons (NPCs) are held annually at the Solar Radiation Research Laboratory (SRRL) in Golden, Colorado. Open to all ACR owners and operators, each NPC provides an opportunity to determine the unique WRR transfer factor (WRR-TF) for each participating pyrheliometer. By adjusting all subsequent pyrheliometer measurements by the appropriate WRR-TF, the solar irradiance data are traceable to the WRR. NPC-2018 was September 24 through October 5, 2018. Participants operated 43 ACRs to simultaneously measure clear-sky direct normal solar irradiance during this period. The Transfer Standard Group (TSG) of reference radiometers for NPC-2018 consisted of four NREL radiometers with direct traceability to the WRR, having participated in the Twelfth International Pyrheliometer Comparisons (IPC-XII) in the fall of 2015. As a result of NPC-2018, each participating absolute cavity radiometer was assigned a new WRR-TF, computed as the reference irradiance determined by the TSG divided by the observed irradiance from the participating radiometer. The performance of the TSG during NPC-2018 was consistent with previous comparisons, including IPC-XII. The measurement performance of the TSG allowed the transfer of the WRR to each participating radiometer with an estimated uncertainty of plus/minus 0.36% with respect to the International System of Units.

14 SOLAR ENERGY↗

Building a Predictive Fission Rate Model

Nuclear fission, and specifically the rate at which fission occurs compared to other types of reactions, is a crucial piece in the puzzle of the origin of the elements in the universe. Fission in astrophysical environments involves rare and exotic nuclei that cannot be studied in the laboratory, and we must therefore rely on model calculations. Yet all fission rates calculated today use a phenomenological (theoretical) model that was formulated in 1939, updated in 1953, and has remained essentially unchanged. Because the model contains many adjustable parameters, it has been successfully used to fit existing data, but in turn has very limited predictive power in cases where the data are poor or nonexistent. The goal of this project was to develop a novel approach that moves away from phenomenology to construct a fission-rate model built from microscopic ingredients: protons, neutrons, and their mutual interactions. The approach adopted in this work relied on the construction of a discrete basis of mean-field states that form paths through scission. The calculations were performed within the framework of the generator coordinate method. The project has produced a methodology for constructing the discrete basis states and identifying likely fission paths, as well as estimates of the energy partition between fragments and a formalism to calculate fission rates based on Fermi’s golden rule.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Uncertainty about the Uncertainty [Slides]

A golden standard in science is to repeat an experiment a statistically significant number of times, recording data using the same set of detectors and the same data analysis methodology. In such case experimental error includes both the range of true values generated by repetitions of the experiment, and measurement uncertainty caused by the detector. They are independent. It is a huge and too frequently used simplification, to assume that one can measure multiple repetitions of an identical experiment, resulting in identical true experimental value. Repetitions, as similar is it is experimentally achievable result in a range of the true values rather than in a single value. When modern, very sensitive and well calibrated measurement systems are used, this range is not negligible, and sometimes dominates, in comparison to the measurement uncertainty. Range of true values depends on the physics of the experiment, while measurement uncertainty depends on the measurement method (properties of the detector not of the experiment). When data from one–of–a kind experiment are analyzed, only the measurement uncertainty is reported. It gives no information about the range, in which the true values of experiment would spread if the experiment was repeated. A frequently used approximation, that if a physical quantity is measured as a function of time, only measurement of this quantity, produces uncertainty is also in some real experiments fare to strong. Example: In reaction history time measurement uncertainty propagated to alpha dominated under certain conditions over the flux measurement uncertainty propagated to alpha. Reliability of a data point is in general independent from its measurement uncertainty. However, in practice reliable measurement methods frequently have high measurement uncertainty, while low reliability methods are applied to limit measurement uncertainty. Comparison of reliable data with high measurement uncertainty to not so reliable data measured with low uncertainty is discussed – in different scenarios different data analysis methods are applicable.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurement Uncertainty in One-Of-A-Kind Event Data Analysis

A golden standard in science is to repeat an experiment a statistically significant number of times, recording data using the same set of detectors and the same data analysis methodology. In such case experimental error includes both the range of true values generated by repetitions of the experiment, and measurement uncertainty caused by the detector. They are independent. It is a huge and too frequently used simplification, to assume that one can measure multiple repetitions of an identical experiment, resulting in identical true experimental value. Repetitions, as similar is it is experimentally achievable, have unavoidable built-in differences resulting in a range of the true values rather than in a single value. When modern, very sensitive and well calibrated measurement systems are used, this range is not negligible, and sometimes dominates over the measurement uncertainty. Range of true values depends on built-in differences in physics of the experiment. Stochastic physical processes result typically in a broader range of true values than non-stochastic processes do. Measurement uncertainty depends on a measurement method (properties of the detector not of the experiment). Modern measurement methods, including digital ones, frequently make the measurement uncertainty very small. When data from one–of –a kind experiment are analyzed, only the measurement uncertainty is reported. It provides no information about the range of true experimental values, neither about reliability of a reported data point. Reliability of a data point is in general independent from its measurement uncertainty. However, in practice reliable measurement methods frequently have high measurement uncertainty, while low reliability methods are applied to limit measurement uncertainty. Comparison of reliable data with high measurement uncertainty to not so reliable data measured with low uncertainty is discussed – in different scenarios different data analysis methods are applicable. Methods for data analysis from an experiment repeated statistically significant number of times are very well developed. They do not require a detailed expertise in physics of an experiment, nor in the properties of the measurement system used, and meaning of the reported uncertainty is well understood in any scientific community. It all changes when data from one-of-a-kind experiment is analyzed. Analyst’s expertise is required both in the physics of the experiment and in all aspects of the measurement system, all possible malfunctions. Data users must remember that only measurement uncertainty is reported from any one-of-a-kind experiment. Theory with simulations may provide estimation of expected built-in differences in the experiment, and by this of expected range of true values for a given experiment; yet measurement uncertainty can never be used in place of the range of true experimental values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plastics for a Circular Economy Workshop: Summary Report

This report summarizes the results of a public workshop sponsored by the Bioenergy Technologies Office, the Advanced Manufacturing Office, and Mars held on December 11–12, 2019 in Golden, Colorado. The Plastics for a Circular Economy Workshop brought together experts from industry, academia, and national laboratories to discuss opportunities and challenges facing the development of new technologies to address plastic waste.

36 MATERIALS SCIENCE↗

Measurement Uncertainty in One-of-a-kind Experiments

A golden standard in science is to repeat an experimental measurement multiple times and calculate the measured value with experimental uncertainty by following well developed statistical procedures. For various reasons – cost, technical difficulty, international treaties, ethics of dealing with human or animal subjects, ecology - many important experiments and observations can not be repeated. Astronomy, earthquakes, hurricanes produce data from one-of-a-kind events. When information is not available in any other way, it should not be dismissed as qualitative, anecdotal evidence only. Analyzed in a mathematically rigorous way, it produces quantitative experimental data. Analysis of data from one-of-a-kind event differs from analysis of repeated experiments’ data. For repeated experiments, the experimental error includes a range of true values generated by repetitions of the experiment, and measurement uncertainty caused by detectors. They are independent. Repetitions of any experiment, as similar as achievable, always have built-in differences resulting in a range of the true values rather than in a single value. Measurement uncertainty depends on the measurement system only. Digital measurements have very small uncertainty, frequently smaller than the range of true experimental values resulting from built-in differences in the experiment repetitions. When data from one–of–a kind experiment are analyzed, only the measurement uncertainty can be reported.

42 ENGINEERING↗

Methods for R&D Portfolio Analysis and Evaluation (Workshop Report)

The Workshop on Methods for R&D Portfolio Analysis and Evaluation convened on 17–18 July 2019 at the National Renewable Energy Laboratory in Golden, Colorado, and examined strengths and weaknesses of the various methodologies applicable to R&D portfolio modeling, analysis, and decision support, given pragmatic constraints such as data availability, uncertainties in estimating the impact of R&D spending, and practical operational overheads. Participants employed their deep expertise in approaches such as stochastic optimization, real options, Monte-Carlo analysis, Bayesian networks, decision theory, complex systems analysis, deep uncertainty, and technology-evolution modeling to critique the initial example models developed by the project’s core team and to conduct thought experiments grounded in real-life technology models, progress data, expert elicitation, and portfolio information. This engagement of participants’ methodological expertise with the practical requirements of real-life portfolio decision support yielded ideas for improved approaches, alternative methodological hypotheses, and hybridization of methodologies that are well-grounded theoretically, computationally sound, and realistically executable given data availability and other practical constraints.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Methods for R&D Portfolio Analysis and Evaluation (Workshop Report)

The Workshop on Methods for R&D Portfolio Analysis and Evaluation convened on 17-18 July 2019 at the National Renewable Energy Laboratory in Golden, Colorado, and examined strengths and weaknesses of the various methodologies applicable to R&D portfolio modeling, analysis, and decision support, given pragmatic constraints such as data availability, uncertainties in estimating the impact of R&D spending, and practical operational overheads. Participants employed their deep expertise in approaches such as stochastic optimization, real options, Monte-Carlo analysis, Bayesian networks, decision theory, complex systems analysis, deep uncertainty, and technology-evolution modeling to critique the initial example models developed by the project’s core team and to conduct thought experiments grounded in real-life technology models, progress data, expert elicitation, and portfolio information. This engagement of participants’ methodological expertise with the practical requirements of real-life portfolio decision support yielded ideas for improved approaches, alternative methodological hypotheses, and hybridization of methodologies that are well-grounded theoretically, computationally sound, and realistically executable given data availability and other practical constraints.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Nuclear Canister Filter Test System UPC Plan

LANL has purchased “Hagan” canisters and “SAVY” canisters from NFT Inc (Golden CO). This document provides instruction for calibrating a LANL-designed FTS Filter Test System. The FTS device measures the amount of oil droplet aerosol captured in filters of nuclear material canisters at Los Alamos National Laboratory (LANL). The FTS device is intended to evaluate canister filters manufactured by NFT. The Los Alamos Standards and Calibration Lab (S&CL) does not support the calibration of aerosol generation or counting instrumentation. For operations inside the LANL TA-55 PF4 facility, the LANL FTS system could be potentially contaminated. LANL has constructed two (2) FTS devices, one in TA-55, the other in TA-3.

42 ENGINEERING↗

It begins - digitizing the Rocky Flats Collection

From 1952 to 1989, the Rocky Flats Plant near Golden, Colorado, manufactured plutonium cores - the nuclear weapon pits that still exist in the nation’s nuclear weapons stockpile. Not only did Rocky Flats personnel produce these plutonium cores, they also documented every facet of this highly technical process. Moreover, Rocky Flats was a premier center for actinide research and development, with these data as relevant today as they were yesterday

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

New Pathways for Hydropower: Getting Hydropower Built--What Does it Take?

This report is the result of a collaboration of experts with diverse perspectives and a wealth of experience in designing, developing, owning, and operating small hydropower facilities. These experts met in Golden, Colorado, in December 2013 to put forth innovative ideas about accelerating the development of small hydropower projects. Innovations put forth by these experts can yield more than just technology advancements. Innovation is possible in all phases of project development, from concept to commissioning to operations and maintenance. These innovative ideas were refined and organized in subsequent collaborations among these experts to produce this final version of the report.

13 HYDRO ENERGY↗

Summary Report of the Reactive CO 2 Capture: Process Integration for the New Carbon Economy Workshop

Decarbonization of our global economy is required to limit planetary warming to +1.5⁰C above pre-industrial levels, an ambitious goal set into motion by the Paris agreement. Given the scale and urgency, the solution demands international, cross-sector advancements spanning policy, social responsibility, and technology, with emphasis on step changes over incremental changes. To that end, technological revolutions that disrupt the status quo need to be envisioned and enacted. One potential technological revolution is the production of fuels, chemicals, and materials from carbon dioxide (CO 2 ) as the starting feedstock, leveraging renewable energy as the driving force. Over the past decades, significant research, development, and deployment has occurred on technologies for capturing CO 2 from point sources or the air and utilizing this CO 2 as a working fluid or as a chemical reactant; however, most of this work has been siloed in these two categories. Recently, an emerging field has started to explore the direct integration of CO 2 capture and conversion technologies as a means to reduce overall energy demand (i.e., avoid energy penalty of CO 2 desorption/regeneration of capture media) and capital expense through process intensification. This strategy represents an opportunity to leapfrog forward this technological revolution. However, the field is in its infancy and the technologies are at an early stage of development, thus it is critically important to define and assess the value proposition of this strategy relative to alternatives (e.g., separated capture and conversion technologies, fuels and chemicals derived from renewable feedstocks like biomass, and industrial electrification) to chart a path forward. To identify next steps, we organized a workshop titled “Reactive CO 2 Capture: Process Integration for the New Carbon Economy” which was held in Golden, Colorado, February 18–19, 2020. The focus of this workshop was to discuss approaches for merging CO 2 capture and CO 2 conversion/utilization systems into what we denoted as an integrated "reactive capture" strategy. By our definition, reactive capture of CO 2 is the coupled process of capturing CO 2 from a mixed gas stream and converting it into a valuable product without going through a purified CO 2 intermediate (see full definition in the Introduction section). This report seeks to summarize feedback from the approximately 125 participants and subject matter experts in attendance from academia, industry, U.S. Department of Energy (DOE), and DOE national laboratories. The workshop agenda is included in Appendix A and the full list of attendees can be found in Appendix B. To elucidate a path forward, we first asked the attendees to define what success would look like for reactive capture in the short term (0–5 years), midterm (5–10 years), and long term (10+ years) and then asked them to answer four questions related to how we could achieve that success: (1) What are the key barriers and challenges to success? (2) What are needed activities to overcome barriers and challenges? (3) What opportunities will arise from these activities? (4) What is a target outcome and what metrics need to be met?

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Satellite-Based Solar Forecasting Including Maintenance of Computer and Storage Equipment at CSU/CIRA (CRADA Final Report)

The Cooperative Institute for Research in the Atmosphere (CIRA) at Colorado State University (CSU) proposes to continue its research partnership with the NREL in Golden, CO. The partnership resonates with the goals outlined in a Memorandum of Understanding between the Department of Energy and the Department of Commerce (with the National Oceanic and Atmospheric Administration (NOAA)) signed in 2011. This CRADA will sustain the research partnership and provide an avenue and resources for ongoing collaborations, including the maintenance of NREL-furnished computer and storage equipment at CSU/CIRA. There is no formal exchange of funds in this CRADA; support above and beyond the in-kind items outlined in this document will come on a best-effort basis and/or in association with formal sponsored-research enabled collaborations. The research conducted under this CRADA continues to work toward enabling and improving short-term solar energy forecasting as developed under previous CIRA/CSU and NREL collaborations, with specific focus on point-based (e.g., solar farm) forecasting on the 1-3 hour timeframe. Under the best-effort actions during the CRADA period, technical maintenance of CIRA's existing satellite-based solar forecasting algorithm ("CIRACast"; Miller et al., 2017) was continued to maintain operability with evolving datasets. These efforts benefit the public by maintaining national capability for point solar forecasting using geostationary observation platforms, and laying the groundwork for future technical improvements as opportunities arise.

14 SOLAR ENERGY↗

2020 Solar Decathlon Education Partner: Cooperative Research and Development (Final Report, CRADA Number CRD-19-00802)

The U.S. Department of Energy Solar Decathlon (DOE/SD) is a collegiate competition, comprising 10 contests, that challenges student teams to design and build highly efficient and innovative buildings powered by renewable energy. The winners will be those teams that best blend architectural and engineering excellence with innovation, market potential, building efficiency, and smart energy production. The DOE/SD is comprised of two Challenges--Design Challenge (annual, in April of each year at NREL in Golden, Colo.) and Build Challenge (biennial, held next in June/July 2020 in Washington D.C.). NREL provides competition management for DOE/SD. For over 35 years, EEBA has provided the most trusted resources for building science information and education in the construction industry. EEBA delivers turn-key educational resources and events designed to transform residential construction practices through high performance design, marketing, materials, and technologies. NREL and EEBA establish this CRADA to enable the success of the DOE/SD program in managing sponsorship funds and creating a professional education program. EEBA acted as an Education Partner to DOE/SD, which included: 1) accepting and dispersing sponsorship funds for DOE/SD; and 2) providing professional development content.

14 SOLAR ENERGY↗

Front-End Engineering Design for Piperazine with the Advanced Stripper

This Department of Energy (DOE) funded project was executed with the goal of preparing a Front-End Engineering Design (FEED) for the capture and compression of 90% of the CO2 that would normally be emitted from an existing natural gas combined cycle (NGCC) plant. The FEED focused on the application of the piperazine advanced stripper (PZAS) process at Mustang Station of the Golden Spread Electric Cooperative (GSEC), which consists of two gas turbines with common heat recovery steam generator (HRSG). The University of Texas at Austin (UT) served as the prime contractor, and subcontracted AECOM Technical Services and Trimeric Corporation to support FEED development. This project team has worked together to advance PZAS for more than a decade. ExxonMobil, Chevron, and Total provided project co-funding. The objectives of this work included: 1. To advance engineering design such that a comprehensive estimate for the total installed cost of a full-scale PZAS CO2 Capture Plant with CO2 compression can be developed on an existing NGCC power plant. a. These detailed costs can also be used to qualify PZAS and other related second generation (2G) amine scrubbing processes for use on cogeneration facilities in refineries and chemical plants that use gas turbines with HRSGs to produce steam. b. These detailed costs will help qualify 2G amine scrubbing for use on NGCC power plants and establish a more accurate baseline cost to be used as a target by other capture technologies. 2. To provide cost details to be used in the economic optimization of the process features of PZAS and other 2G amine scrubbing processes. 3. To provide DOE with a more detailed understanding of carbon capture costs in a commercial application, enabling DOE to better design its R&D program to improve the economics for carbon capture. 4. To provide the host site and cost share partners with the information necessary to determine whether a commercial project to capture and use CO2 for enhanced oil recovery (EOR) or for sequestration can be justified (when accounting for the 45Q tax credit). A key component of the FEED is the estimated total installed cost, which provides a basis for the likely capital investment necessary to implement the PZAS carbon capture process at this location and scale. In combination with the included economic analysis, which accounts for potential revenue from the produced CO2, potential avenues to profitability are explored. The major findings of the FEED are as follows: The Mustang Station PZAS CO2 Capture Plant estimated total project cost of $698 MM of which $384 MM was direct costs. The annual operating costs were $32.6 MM. The total investment for a PZAS facility at Mustang Station is $725 MM. This estimate includes owner’s cost of $25 million and a contingency of $110 MM. • The study estimated the CO2 capture plant at Mustang Station would generate CO2 at $110/tonne for EOR, assuming a 12% IRR (internal rate of return) and an 85% capacity factor. For CO2 storage, the same case would achieve a 12% IRR at about $114/tonne. At a capacity factor of 52%, the storage and EOR cases would break even when carbon is priced ~$150/tonne. The economic analysis determined that the capacity factor and utility pricing, among other variable factors, had a significant effect on the economics and will need additional studied. • The energy penalty of the PZAS plant would be about 46 MW in connected power and 35 MW in operating load. The natural gas requirement (for the Gas Boiler package) would be about 354 MMBTU/hr. • The FEED revealed no major risks in process maturity. However, some areas were outlined for further engineering during detailed design, which included the Gas Boiler system, general arrangement and site layout, air coolers, schedule development, and optimization of the process for higher CO2 removal. • If PZAS were to be implemented at another host site, additional opportunities for cost reduction for would include cost reduction through use of cooling water and steam extraction.

03 NATURAL GAS↗