SEARCH · Engineering Papers
Results for “GOES”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Innovative Approaches for the Dissemination of Near Real-Time GOES Data for Terrestrial and Space Weather Applications
No abstract available
GOES-16 GLM Post Launch Testing, Performance, and Product Assessments
No abstract available
An Overview of NASA SPoRT GOES-R & JPSS Proving Ground Testbed Activities
No abstract available
Smap: A Hydrologist Goes Crazy with a New High-Quality Dataset
By providing global measurements of near-surface soil moisture (down to about 5 cm) with unprecedented accuracy, the Soil Moisture Active/Passive (SMAP) satellite mission has opened the door to new and (in my opinion) exciting hydrological science. In this seminar, I present the results of a recent series of analyses performed with SMAP soil moisture data, covering a wide range of topics: (a) the characterization of the dynamics of near-surface soil moisture, with implications for forecasting soil moisture days into the future; (b) the multi-faceted character of the SMAP data, in the sense that different, established analysis approaches can extract information from the data that is largely (and perhaps unexpectedly) complementary; and (c) the interpretation of the data in the context of large-scale water fluxes. This final analysis is particularly exciting to me because it shows that, once the relevant algorithms are calibrated, precipitation and streamflow rates in hydrological basins can be estimated from the SMAP data alone - a reflection of the fact that the near-surface soil is a critical gateway between the atmospheric and subsurface branches of the hydrological cycle.
On-Orbit Validation of the Geolocation Accuracy of GOES-16 Geostationary Lightning Mapper (GLM) Flashes Using Ground-Based Laser Beacons
No abstract available
Survey of Localized Solar Flare Signatures in the Ionosphere with GNSS, VLF, and GOES Observations
Global navigation satellite system (GNSS) phase measurements of the total electron content (TEC) and ionospheric delay are sensitive to sudden increases in electron density in the layers of the Earth’s ionosphere. These sudden ionospheric disruptions, or SIDs, are due to enhanced X-ray and extreme ultraviolet radiation from a solar flare that drastically increases the electron density in localized regions. SIDs are solar flare signatures in the Earth’s ionosphere and can be observed with very low frequency (VLF ~ 3-30 kHz) monitors and dual-frequency GNSS (L1 = 1575.42 MHz, L2 = 1227.60 MHz) receivers that probe lower (D-region) to upper (F-region) ionospheric layers, respectively.
Impact of Geostationary Aerosol Observations on the GEOS Aerosol Forecasting System: Preliminary Results for ABI on GOES-16
No abstract available
What Goes up Must Come Down: Cassini Maneuver Experience During the Inclination-Raising Phase Prior to End of Mission
The Cassini spacecraft is kept on its planned reference trajectory using maneuvers designed by the Cassini Maneuver Team. The experiences of the team are documented for 2016—a span of the mission during which the orbit inclination is steadily increasing. This period contains 33 planned maneuvers and 11 Titan flybys leading up to the final orbits before Cassini’s plunge into Saturn. Information about each maneuver is provided along with discussion of situations where operations deviated from the normal routine.
Transformational Phenomena as Predictors of Aircraft Accidents: What Goes Around Comes Around
Flight crew confusion, excessive stressworkload, and ineffective Crew Resource Management among other issues arising from dependence on automated systems on the flight deck have been identified as major causal factors in multiple fatal accidents, significant incidents and near misses. Many Loss of Control events have been traced to display of erroneous flight data and auto-flight system mode status to the crew. Safety was compromised by not having sufficiently obvious and unambiguous information available in order to permit quick diagnosis of aircraft status and then appropriate action to regain control of the aircraft energy state or trajectory. Continually evolving training and operational requirements related to aircraft automation have also presented critical challenges to commercial aviation. During times of high demand and low supply of experienced pilots (which is today the case in South-East Asia, for instance), basic training in manual flight may be minimal and as low as a few hundred flight hours on light aircraft before beginning training on advanced, highly automated aircraft. Predominant use of automation may cause aircrew trained in this way to have trouble performing traditionally simple operations such as manually switching to other runways or overriding the autopilot in tight situations. Inadequate crew training andor experience coupled with attempted manual flight in highly automated airplanes may more easily lead to loss of aircraft control in unusual situations such as high-altitude stallsupsets, traffic avoidance or maneuvering. Loss of basic piloting skills through increasing dependence on automation may exacerbate this problem. Finally, design changes by nature take a long time and are very costly. Incorporating novel automated functionality into new aircraft designs is technically feasible and desirable. However, it may take many years for these changes to have a significant impact on tomorrows fleet, given the time it takes to develop a new aircraft and for these aircraft to become a significant fraction of the fleet. This paper will review and summarize the findings and recommendations from a 2004 study of the topic, Increasing reliance on flight deck automation conducted by the Future Aviation Safety Team at the behest of the Joint Safety Strategy Initiative (JSSI) within the Joint Aviation Authorities (JAA) organization that existed at the time. Although this study was conducted more than ten years ago, its findings and recommendations are as relevant now as then and into the future.
Towards a Multispecies Reanalysis of the Stratosphere: Doing Chemistry with the MLS Data and the GOES StratChem Model
No abstract available
The GOES Lightning (and Meteor!) Mapper: the Potential Use of GLM for Bolide Detection and Response
No abstract available
When There are Different Types of Smoke in the Sky It Changes How the Sun Light Goes Through the Sky
When the sky gets smoke in it, it can be more or less bright (white) than before. This is because the small smoke bits can change whether sun light gets through the sky to the ground, can change how much white sky water there is, and can change how the sky air moves around. If the smoke is blacker, it can make the sky warmer and if the smoke is whiter, it can make the sky (and the ground) cooler because the sun light doesn't get through. So we wanted to know whether the smoke is blacker or whiter over the big water far away from here, near where there are a lot of fires on the land.We went to the big water place and watched the sky, the air, the sky smoke, and the white sky water. We did this by flying in the sky with our computers. We watched the smoke in a lot of different ways: we can look at the smoke from near the water and see what sun light gets through the sky, or from above and see how the sun light comes back up to space, or go right in the smoke with our flying computer eyes. Then we looked at whether the different ways of seeing showed that the same smoke was different (blacker or whiter) or the same. A lot of time they said it was the same, at least in some ways, but sometimes the smoke looked different and it changed a lot in different places over the big water.We hope other people can put these answers into their computer studies, or into their computers that fly REALLY high, and then we can better understand how the sky gets warmer or cooler from smoke.
Making Thin Sections from National Treasures: A Little Moon Rock Goes a Long Way
NASA’s Johnson Space Center curates the Apollo sample collection through their facilities in Houston, TX. It is a dual-purpose facility, intended both to store and preserve the precious samples, as well as to make them available for ongoing scientific study and public examination. The facilities consist of multiple vaults and lab spaces, including the Apollo Thin Section Lab. Although it is a part of the Curation facilities, this lab is intended to process specific lunar rock and dust samples into what are called “thin sections”. A thin section is a microscope slide with a very thin, highly polished slice of rock material mounted on it. These are used not only for microscope viewing, but also for a range of other sophisticated scientific instruments to map and measure fine details of the rock’s physical and chemical composition and structure. The process of making a thin section requires great care and patience and is an art in itself; each one is unique, and each sample can behave very differently while going through the same basic procedures. In general, it begins by taking a small chip of rock from a much larger sample. The rock fragment is placed within a small mold and liquid epoxy is poured over it and allowed to harden, producing what is called a “potted butt” (Figure 1). This is to stabilize the rock so that it won’t fragment or crumble during polishing, and to fill any cracks or voids within the rock. Once hardened, the epoxy on the bottom is carefully ground away to expose the rock surface within, which is then polished to a 1-micron finish. A thin new layer of fresh epoxy is then applied to the polished surface and used to mount it to a silica slide. Once the mounting epoxy has hardened, the potted butt is cut off less than one millimeter above the slide using a low-speed circular saw. This thin layer of sample material attached to the slide undergoes further grinding and polishing, typically bringing the sample thickness down to about 35 microns – roughly one third of the thickness of a human hair. The remaining potted butt is saved for future scientific investigations and can be re-polished and used again until all the rock material within it is used up. A single thin section can be reused countless times by numerous different researchers. In addition, thin sections are often exquisitely beautiful (Figure 2) and in some cases, lunar thin sections are used as public display samples, such as at the Smithsonian Air and Space Museum in Washington, DC. The production of thin sections allows an immense variety of research to be conducted on a tiny amount of rock or mineral material, allowing the bulk of the Apollo collection to stay pristine and unaltered, and thus, remain available for next generation of lunar scientists to further our insight into the Moon’s geological diversity, and to bring valuable new insights to our understanding of the origin of the Earth-Moon system.
Short timescale stability monitoring of GOES-16 visible channels based on daily inter-calibration events with VIIRS and MODIS
The CERES project uses geostationary (GEO) imager derived broadband fluxes to estimate the diurnal flux variations between the Terra (10:30 LT) and Aqua (1:30 LT) flux obs. The GEO derived cloud properties are utilized for narrowband to broadband and angular directional model (ADM) algorithms. The GEO imager channels are first inter-calibrated to the Aqua-MODIS C6.1 calibration reference to ensure that the retrieved clouds and fluxes will be consistent. The CERES project has a 2-month latency, all GEO, MODIS and VIIRS calibration anomalies must be identified and mitigated. Convert the monthly GEO ray-matching algorithm into a daily monitoring algorithm to catch any daily calibration anomalies.