Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuel Economy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Requesting an Exemption from Standard Compliance: EPAct State and Alternative Fuel Provider Fleet Program Guidance Document

The U.S. Department of Energy established the Alternative Fuel Transportation Program (Program) and associated regulatory requirements pursuant to the Energy Policy Act of 1992. The Program, otherwise known as the State and Alternative Fuel Provider Fleet Program, requires covered state government and alternative fuel provider fleets operating under Standard Compliance to acquire alternative fuel vehicles (AFVs) as a specific percentage of their annual non-excluded light-duty vehicle acquisitions. The opportunity for covered fleets operating under Standard Compliance to request exemptions from their AFV-acquisition requirements serves as administrative relief in the unlikely event a fleet is unable to satisfy its requirements through the normally available compliance alternatives. These alternatives include the acquisition of light-duty AFVs, the acquisition of other, creditable vehicles (e.g., gasoline-fueled hybrid electric vehicles), making certain investments, the purchase of biodiesel for use in medium- or heavy-duty vehicles to the maximum extent allowed, and purchasing or trading for banked AFV credits. This document addresses requests for exemptions from the AFV-acquisition requirements to help covered fleets better understand: How to file a request for an exemption, information and documentation DOE needs to process an exemption request, and important policies relevant for filing exemption requests.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗
DOE OSTI2024

Submitting a Standard Compliance Annual Report: EPAct State and Alternative Fuel Provider Fleet Program User Guide

State government and alternative fuel provider fleets covered under the State and Alternative Fuel Provider Fleet Program (Program) established pursuant to the Energy Policy Act of 1992 (EPAct) may use the Compliance Reporting Tool to track and report on several compliance activities. These activities include, but are not limited to, completing Standard Compliance annual reports, Alternative Compliance notices of intent, and exemption requests. Covered fleets can access the Compliance Tool through the Program's website at https://epact.energy.gov/users/sign_in. Covered fleet points of contact should bookmark the Compliance Reporting Tool for future access. This user guide addresses how to complete and submit Standard Compliance annual reports, including getting started with reporting, submitting annual reports, submitting exemption requests, and viewing annual reports.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

The Transportation Energy and Mobility Pathway Options (TEMPO) Model: Overview and Validation of V1.0 [Slides]

This presentation documents the approaches and methods used in the Transportation Energy & Mobility Pathway Options™ (TEMPO) model to evaluate passenger and freight demand for transportation and mobility services, project vehicle ownership and technology adoption decisions, and determine transport mode choices to derive scenarios of future energy use and emissions. TEMPO is an all-inclusive transportation demand model that covers the entire United States, with an implicit spatial resolution and an hourly temporal resolution that allows for generating time-resolved energy use profiles to assess multisectoral integration aspects. Key features of the TEMPO model include the ability to perform endogenous out-of-sample forecasting to extrapolate recent emerging trends and analyze impacts of disruptive technological breakthroughs and behavioral changes. TEMPO employs an innovative representation of passenger mobility demand stemming from household-level decisions that determine vehicle adoption, ownership, and use based on sociodemographics (e.g., income, household composition), technology attributes (e.g., travel cost, time), geography (e.g., urban, suburban, rural) and population-specific multiday mobility and travel requirements. This representation enables a more forward-looking perspective on the use of new mobility options and the adoption of alternative fuel vehicles, as well as a more accurate representation of their energy usage profiles than previous modeling approaches. A comparison with the U.S. Energy Information Administration’s Annual Energy Outlook showcases the ability of TEMPO to accurately replicate widely accepted projections by representing the key elements of the entire transportation sector at the appropriate level of resolution. TEMPO is intended to generate future scenarios of technology adoption, energy use, and emissions in the transportation sector to compare alternatives, inform decision makers, and assess integration with energy infrastructure and supply systems at an appropriate spatiotemporal resolution.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Life-Cycle Assessment of Sustainable Aviation Fuel Derived from Paper Sludge

Converting waste paper sludge to sustainable aviation fuel (SAF) offers a circular economy strategy to decarbonize the aviation sector. Here, this study develops a life-cycle assessment (LCA) for converting high-ash paper sludge to SAF in the U.S. using a catalytic sugar upgrading system that consists of ash removal, enzymatic hydrolysis, dehydration, aldol condensation, and hydroprocessing. The LCA is coupled with a process simulation for an industrial-scale biorefinery based on experimental data. We quantified the carbon intensity as 35.7–41.8 gCO 2 eq MJ –1 SAF (–636 to –584 gCO 2 eq per dry kg paper sludge) with acetone as a solvent, renewable fuel, and biobased chemicals; this is further reduced to 5.1–11.1 gCO 2 eq MJ –1 (–925 to –873 gCO 2 eq per dry kg paper sludge) if ash is recycled and used for substituting cement. Converting 1 dry kg paper sludge to SAF with acetone, renewable fuel, and biobased chemicals (–925 to –584 gCO 2 eq) is more climate beneficial than landfilling without landfill gas recovery (791 gCO 2 eq) and with landfill gas recovery (–294 gCO 2 eq). More than 330 million gallons of SAF can be produced annually (>4 million dry t paper sludge/year in the U.S.), resulting in a reduction of 2–7 million tCO 2 eq.

09 BIOMASS FUELS↗
DOE OSTI2024

Bioblendstocks to Optimize Mixing Controlled Compression Ignition (MCCI) Engines

In this project, a team of researchers from the University of Massachusetts Lowell, the University of Maine, and Mainstream Engineering developed an integrated process for the product of bioblendstocks to optimize mixing controlled compression ignition (MCCI) engines. The objective was to improve the energy density, sooting propensity, and cetane number of base diesel fuel while maintaining cold weather behavior. The process converts woody biomass (e.g. sawmill residues) into bio-oil through selective fast pyrolysis; the bio-oil is then selectively upgraded to form selectively oxygenated, minimally-branched hydrocarbons using non-noble metal catalysts in combination with metal-catalyzed hydrogenation. Advanced predictive models, in conjunction with existing property databases, and experimental testing are used to evaluate overall bioblendstock properties and their impact on base diesel fuel. An iterative, targeted upgrading approach was implemented to optimize the proposed bioblendstock’s properties. Assessment methodologies included techno-economic analysis, life-cycle assessment, property testing, and engine testing. Ultimately, the project team successfully produced a viable bioblendstock while identifying critical process points related to scale-up efforts. It was found that producing pyrolysis oils at 500 degrees C and with pine particle sizes of 1-2 mm led to bio-oil with a higher yield (of approximately 45 wt%) and rich amounts of aromatic alcohols. The resultant pyrolysis oil was then upgraded using a sequence of mild hydrotreating, followed by catalytic etherification and esterification, followed by another final mild hydrotreating to produce a blendstock containing saturated species with a limited, but non-zero, amount of oxygen. The aromatic alcohols produced by pyrolysis were especially helpful in this regard, as the resulting bicycloethers and derivatives exhibited high cetane numbers. While most bulk properties of the bioblendstock met or exceeded targeted thresholds, viscosity and cloud point notably fell outside the expected range; this could be addressed by blending limits and/or through the use of additives that are commonplace in current refinding practices. Identification of a bioblendstock that can be produced economically at scale while improving the performance and emissions characteristics of internal combustion engines positively affects the economy by boosting domestic fuel production and the environment by decreasing harmful emissions and increasing efficiency.

09 BIOMASS FUELS↗
DOE OSTI2020

Anaerobic Storage and Conversion of Microalgal Biomass to Manage Seasonal Variation in Cultivation

Seasonal variation in microalgal biomass production is a well-known challenge when optimizing economics for algal fuel conversion, especially given the fluctuation in biomass production between winter and summer. Wet storage offers significant potential for cost and energy savings compared to dewatering and dry storage. This study demonstrates the feasibility of preserving harvested Scenedesmus acutus biomass through wet anaerobic storage for use in biochemical conversion. Anaerobic storage effectively preserved biomass with minimal degradation of carbohydrates and preservation of lipids and proteins. Screening experiments identified optimal pretreatment conditions for stored biomass. Scale-up of pretreatment enabled fermentation of the hydrolysate to butyric acid and indicated no observable difference in conversion between unstored and stored biomass. Lipid extraction improved by a relative 12% for stored biomass. These results suggest that wet anaerobic storage can effectively manage seasonal variation in biomass production and is compatible with biochemical approaches for biofuel production.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Low-cost crushed-rock heat storage with oil or salt heat transfer

The demand for variable electricity and heat is met by fossil-fuel power plants because the power plant capital costs and the cost of storing fossil fuels are low. A low-carbon economy requires replacement of the storage function of fossil fuels to provide variable heat and electricity as needed. The Crushed Rock Ultra-large Stored Heat (CRUSH) system is a new technology with the goal to provide heat storage at an incremental capital cost of $2–4/kWh at scales of 10 s to 100 s of GWhs that enables economic daily to multi-week storage. CRUSH can be coupled to nuclear power plants, concentrated solar power (CSP) plants and thermal energy batteries to provide variable electricity and heat on demand. Sensible heat is stored in crushed rock—the lowest-cost heat-storage material. Heat is transferred to and from the crushed rock using nitrate salt or heat-transfer oils but these fluids do not store heat. Heat from a nuclear reactor, CSP plant or conversion of low-price electricity into heat is used to heat the salt or oil. The hot fluid is poured over the crushed rock, trickles downward by gravity through the rock, heats the rock and is collected by the drain pans under the crushed rock. To recover heat cold salt or oil is poured over hot crushed rock, trickles down by gravity while being heated and is collected by the drain pans under the crushed rock. The system design and engineering trade-offs are described. The technology is in the early stages of development.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Separations Consortium: Lignin Rich Stream Fractionation and Purification

In support of the Bioenergy Technologies Office in converting lignin to fuels and chemicals, this project develops scalable separations based on membranes and Electordeionization (EDI) to recover low molecular weight (LMW) compounds from lignin rich streams. The project addresses three technology barriers in developing the bioeconomy; (1) Cost of production (2) Selective separation of organic acid species, and (3) Advanced bioprocess development. Specifically, membrane cascades using Tangential Flow Filtration (TFF) are investigated for the recovery of LMW lignin compounds from lignin rich streams such as Alkaline Pretreatment Liquor (APL), Reductive Catalytic Fractionation (RCF) oil, and Catalytic Oxidation oil. Process concepts, including dynamic filtration, are investigated to meet specific performance targets indicated by the consortium's Industrial Advisory Board for the membrane filtration including maintaining permeance > 1 LMH/bar and an overall cost target of < $1/kg of LMW lignin. EDI is investigated as an integral part of the membrane cascade to recover LMW aromatic acids and as an alternative to nanofiltration. Economic analysis of the processes is presented with a focus on minimizing energy consumption and capital expenditure. Furthermore, a sensitivity analysis is presented to identify key cost drivers and optimize holistic process operating conditions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

A Time Series Sustainability Assessment of a Partial Energy Portfolio Transition

Energy portfolios are overwhelmingly dependent on fossil fuel resources that perpetuate the consequences associated with climate change. Therefore, it is imperative to transition to more renewable alternatives to limit further harm to the environment. This study presents a univariate time series prediction model that evaluates sustainability outcomes of partial energy transitions. Future electricity generation at the state-level is predicted using exponential smoothing and autoregressive integrated moving average (ARIMA). The best prediction results are then used as an input for a sustainability assessment of a proposed transition by calculating carbon, water, land, and cost footprints. Missouri, USA was selected as a model testbed due to its dependence on coal. Of the time series methods, ARIMA exhibited the best performance and was used to predict annual electricity generation over a 10-year period. The proposed transition consisted of a one-percent annual decrease of coal’s portfolio share to be replaced with an equal share of solar and wind supply. The sustainability outcomes of the transition demonstrate decreases in carbon and water footprints but increases in land and cost footprints. Decision makers can use the results presented here to better inform strategic provisioning of critical resources in the context of proposed energy transitions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

BETO 2021 Peer Review - Biological Upgrading of Sugars (BUS) 2.3.2.105

The Biological Upgrading of Sugars (BUS) project directly targets the anaerobic conversion of lignocellulosic feedstocks into intermediate molecules readily upgradeable to fuel precursors. Recent efforts on the BUS project have a particular emphasis on the biological production of butyric acid, an intermediate that can be readily upgraded to sustainable aviation fuel, diesel blend-stocks, and high value chemicals. The BUS project approaches this direction through a combination of strain engineering, fermentation process engineering, development of novel separations technologies, and the design and build of pilot scale systems. Our ultimate project goal is to develop an integrated cost-effective process at pilot scale to achieve DOE's MYPP targets of $2.50/GGE. The major thrust of the BUS project over the last project cycle was on the development of integrated processes surrounding the anaerobic production of carboxylic acids using diverse Clostridium species. We developed and expanded genetic tools for several Clostridium species and rewired microbial metabolism in an attempt to maximize substrate utilization and flux towards butyric acid. We designed and built novel bioreactors with an in situ product recovery system enabling the biological production and recovery of highly purified acids. We leveraged this system to generate 100s of grams of acid from corn stover hydrolysate. In this presentation we highlight data surrounding our proposed process and accompanying results from technoeconomic and life-cycle analyses of our integrated process. Finally, we detail plans of our pilot scale reactor system that is in process and discuss our future routes towards achieving economically viable and sustainable diesel and jet blendstocks.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Techno-Economic Analysis and Life Cycle Assessment of Alternative Fuels for Locomotives in the U.S. Freight Rail Sector

Freight rail is more energy-efficient than truck transport over long-haul distances, offering a low-energy and emissions-intensive option for transporting freight. This study evaluates techno-economic analysis and life cycle assessment of seven alternative unblended fuels for freight locomotive engines─biodiesel, renewable diesel (RD), bio-oils, methanol, dimethyl ether (DME), ethanol, and ammonia─across 16 fuel pathways utilizing soybean, corn, woody biomass, renewable hydrogen, and waste sources, e.g., sludge, manure, and industrial CO 2 , and compares these to conventional diesel. The minimum fuel selling price (MFSP) ranged from $\$2.05$ to $\$8.27$ per diesel gallon equivalent (2020 US dollars), with biocrude and RDs produced from hydrothermal liquefaction (HTL) of sludge having the lowest MFSPs due to coproduct credits and avoided waste treatment cost. Life cycle GHG emissions ranged from −41 to 53 g of CO 2 e/MJ. RD from waste via HTL achieves negative emissions by diverting sludge/manure from GHG-intensive conventional management. Few pathways such as biocrude, methanol, and DME require additional control for SO X emissions in the refinery, while ethanol, FT-diesel, and bio-oil require additional control for particulate matter emissions. Bio-oil and RD from sludge have lower marginal abatement cost or MAC (–$\$38$/tonne CO 2 lowest) while methanol and ammonia with renewable hydrogen have higher MAC ($\$490$/tonne CO 2 maximum).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Reserve and energy scarcity pricing in United States power markets: A comparative review of principles and practices

Here, errors in forecasting load and renewable-based generation in restructured power systems mean that independent system operators (ISOs) must procure sufficient operating reserves to keep the real-time operation of the system reliable and secure. But when procured reserves turn out to be insufficient in real-time due to the lack of resource capacity or ramp capability, operators often set higher prices for reserves and energy to encourage more supply, and to motivate consumers to decrease usage or shift it to other times. This procedure, which is called scarcity or shortage pricing, is a core feature of U.S. electricity markets. It is receiving increased attention from market designers and stakeholders because scarcity will become more important for spot price formation in the future with the increased penetration of zero-marginal cost renewables, and the shrinking role of fuel costs in setting prices. Scarcity pricing is implemented in various ways by different ISOs. These differences have practical implications for the level of prices and incentives for investment, operations, and demand modification. In this paper, general approaches and specific calculation procedures for reserve and energy scarcity pricing practices and calculations across the seven ISO-based U.S. power markets are reviewed and compared. A consistent terminology is used to facilitate the comparison. Current scarcity pricing practices are grouped into three approaches: (1) imposing an adder after the spot market is run; (2) including stepwise demand curves within market clearing procedures for non-contingency reserve products (e.g., the novel flexiramp product), which tends to yield longer right tails for energy scarcity premium curves; and (3) having stepwise demand curves for traditional contingency reserve products only, which results in shorter right tails in energy scarcity curves. A generic numerical example is presented to highlight the large practical differences among the reserve scarcity pricing approaches and specific implementations. To further investigate factors that contribute the most to demand curves differences among ISOs, a sensitivity analysis is performed. This analysis shows that the largest source of differences among the curves is the scarcity prices assumed in the case of severe scarcity, while the number of steps used and whether flexiramp is considered also yields important differences in scarcity prices. As renewable penetration increases, it will become increasingly crucial to employ administrative demand curves so that spot prices more effectively motivate supply and demand adjustments exactly when and where they are needed. This study shows that the different assumptions yield very different scarcity premiums for reserves and energy, and are likely to provide divergent incentives for resources to respond to shortages. It is concluded that to promote market efficiency, a reserve shortage demand curve should have at least three features: inclusion of the marginal value of reserve products at each shortage level, consideration of the magnitude and probability of supply contingencies, and avoidance of abrupt price discontinuities that can cause excessively volatile market outcomes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

The role of current and emerging technologies in meeting Japan’s mid- to long-term carbon reduction goals

Using Japan as a proxy for a developed nation, we investigated the role of existing and nascent technologies in curbing carbon emissions. We simulated possible pathways to meeting 2030 and 2050 emission targets within the Japanese electricity supply sector using a single-region model in The Integrated MARKAL-EFOM System (TIMES). Critically, our simulations incorporate novel technologies like hydrogen electrolysers, carbon capture, photochemical water splitting, and emerging photovoltaic cells, assess long-term impacts up to the year 2100, and include life-cycle emissions and learning curves for parameters such as investment cost, efficiency, and emission coefficients. Results indicate that a hybrid approach, using nuclear power and hydrogen from renewable energy-based electrolysis, is cost-effective and provides long-term emission reduction along with energy security. Finally, nuclear, wind, solar, and hydrogen from renewables emerge as key emission reduction technologies, while natural gas with carbon capture plays a minor role in achieving emission reduction targets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Application of machine learning to evaluating and remediating models for energy and environmental engineering

Machine learning (ML) algorithms have been increasingly successful in their applications to solve energy and environmental engineering problems. ML algorithms have the advantage of being able to solve highly nonlinear issues effectively. Furthermore, considering the limited sample size of data collected in energy and environmental engineering, obtaining a ML model with reasonable accuracy is simple. Unfortunately, the vast majority of the current applications of ML algorithms lack effective screening of dominant factors and comprehensive model validation, which weakens the predictive ability of the models. The present study takes the minimum miscible pressure (MMP) of CO 2 - oil systems as an example. It establishes a systematic and robust predictive model to address this issue. Based on 147 sets of slim tube tests, the predictive models of the MMPs are investigated by application of eight ML algorithms. The paper concludes that most of the published ML models in the field of energy and environmental engineering prediction are not reliable. Furthermore, it addresses the main reasons for the poor performance of some predictive models built by ML and provides guidelines on how to make such models robust. Further, to the best of our knowledge, this is the first study to point out the defects of current ML modeling methods and propose countermeasures for their application in energy and environmental engineering problems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Techno-economic analysis and life cycle assessment for the catalytic hydrogenolysis and hydrocracking of polyethylene

Catalytic hydrogenolysis and hydrocracking are promising technologies for the conversion of polyolefin waste into hydrocarbons. Here, to explore the economic and environmental viability of these approaches, we conducted techno-economic analysis and life cycle assessment of polyethylene hydrogenolysis and hydrocracking processes that produce fuel-range products or olefins, respectively. Relative to primary production, the minimum selling price (MSP) of alkanes for linear-chain naphtha was estimated to be 1.8-fold higher, whereas branched-chain naphtha and propylene were shown to be cost competitive. Environmental impacts showed similar trends across scenarios, with propylene production by hydrocracking exhibiting greenhouse gas emissions comparable with conventional propylene due to relatively low hydrogen demand and high yield. Together, these results suggest that innovations in catalysis and reaction engineering will be required to make viable products that are scale matched with today's plastics, such as light olefins for closed-loop recycling.

09 BIOMASS FUELS↗
DOE OSTI2026

Learning from nature’s plant engineers: Hijacking metabolism and development beyond genetics

Plant metabolism underpins the food, fiber, and fuel that support our economy, driving strong interest in new strategies to rewire plant metabolism for emerging applications. While most synthetic biology efforts are reliant on genetic engineering, plants can be manipulated in many other ways that remain comparatively underexplored. Across nature, diverse organisms, including bacteria, fungi, and insects, have evolved sophisticated mechanisms to exploit plant metabolic richness, reshaping it for purposes that span from basic nutrition to the construction of complex, novel structures for shelters. These interspecies interactions and non-model systems represent unique manners in which plants can be reprogrammed or hijacked by other organisms, offering inspiration for novel approaches to engineering plant metabolism. By better understanding the basis of how organisms induce these remarkable transformations in plants, we can expand the conceptual boundaries of synthetic biology and reveal alternative routes to manipulating plants for the production of a diverse array of valuable compounds and materials. Deeper insight into these mechanisms will yield novel blueprints for rethinking the scope and breadth in which we can redesign plant metabolism across many applications.

Sarkiss, Anthony E. [University of California, Ber↗
DOE OSTI2021

Assessment of the driving factors of CO 2 mitigation costs of household biogas systems in China: A LMDI decomposition with cost analysis model

China has been placing a substantial focus on biogas for reducing energy consumption and carbon dioxide (CO 2 ) emissions. The operation mode of biogas systems may make the CO 2 reduction target over-optimistic. There is limited research to investigate the influential factors that may be causing the gap between the actual and theoretical CO 2 reduction costs of biogas systems in China. In this research, by using field survey data of 209 biogas users and 489 non-biogas users from 19 villages in 2015, the gap between actual and theoretical unit CO 2 reduction cost is quantified at approximately 156 USD/t CO 2 . By employing the Logarithmic Mean Divisia Index I (LMDI) model, it is found that both the cost effect (48%) and the reduction effect (52%) contribute to the unit CO 2 reduction cost gap. Furthermore, four influential factors–household labor, accessibility to the energy resource, acceptance of biogas technology, and subsidy–significantly narrow the gap between actual and theoretical CO 2 reduction costs, while the levelized subsidy contributes to widening the gap. On average, biogas systems should be operated for at least four years and the substitution rate should be more than 67% in order to keep the gap between actual and theoretical CO 2 reduction costs under 50%.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗