Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FREQUENCY DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

ON THE FOURIER AND WAVELET ANALYSIS OF CORONAL TIME SERIES

Using Fourier and wavelet analysis, we critically re-assess the significance of our detection of periodic pulsations in coronal loops. We show that the proper identification of the frequency dependence and statistical properties of the different components of the power spectra provides a strong argument against the common practice of data detrending, which tends to produce spurious detections around the cut-off frequency of the filter. In addition, the white and red noise models built into the widely used wavelet code of Torrence and Compo cannot, in most cases, adequately represent the power spectra of coronal time series, thus also possibly causing false positives. Both effects suggest that several reports of periodic phenomena should be re-examined. The Torrence and Compo code nonetheless effectively computes rigorous confidence levels if provided with pertinent models of mean power spectra, and we describe the appropriate manner in which to call its core routines. We recall the meaning of the default confidence levels output from the code, and we propose new Monte-Carlo-derived levels that take into account the total number of degrees of freedom in the wavelet spectra. These improvements allow us to confirm that the power peaks that we detected have a very low probability of being caused by noise.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Phononic thermal resistance due to a finite periodic array of nano-scatterers

The wave property of phonons is employed to explore the thermal transport across a finite periodic array of nano-scatterers such as circular and triangular holes. As thermal phonons are generated in all directions, we study their transmission through a single array for both normal and oblique incidences, using a linear dispersionless time-dependent acoustic frame in a two-dimensional system. Roughness effects can be directly considered within the computations without relying on approximate analytical formulae. Analysis by spatio-temporal Fourier transform allows us to observe the diffraction effects and the conversion of polarization. Frequency-dependent energy transmission coefficients are computed for symmetric and asymmetric objects that are both subject to reciprocity. We demonstrate that the phononic array acts as an efficient thermal barrier by applying the theory of thermal boundary (Kapitza) resistances to arrays of smooth scattering holes in silicon for an exemplifying periodicity of 10 nm in the 5–100 K temperature range. It is observed that the associated thermal conductance has the same temperature dependence as that without phononic filtering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Enhanced magnetic damping in La{sub 0.7}Sr{sub 0.3}MnO{sub 3} capped by normal metal layer

La{sub 0.7}Sr{sub 0.3}MnO{sub 3}(LSMO) and Pt capped La{sub 0.7}Sr{sub 0.3}MnO{sub 3} 20 nm thick films have been grown on SrTiO{sub 3} substrates by pulsed laser deposition. Microstrip line ferromagnetic resonance (MS-FMR) technique is then used to investigate their magnetic dynamic properties and to particularly measure the damping constant based on the frequency dependence of microwave absorption linewidth. The results show that the effective damping constant of LSMO(20nm)/Pt(5.5nm) is three times larger than that of LSMO(20nm) and the films present weak in-plane uniaxial anistropy. The enhancement of the magnetic damping constant due to the capping of Pt is the manifestaction of the generation of spin current in Pt layer. Furthermore, the spin current induces an inverse spin Hall effect (ISHE) in LSMO(20nm)/Pt(5.5nm) system, measured using the FMR in cavity with 9.8 GHz excitation frequency. The linear dependence of ISHE on microwave power validates the mechenism of spin pumping in this bilayer system.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Change of translational-rotational coupling in liquids revealed by field-cycling {sup 1}H NMR

Applying the field-cycling nuclear magnetic resonance technique, the frequency dependence of the {sup 1}H spin-lattice relaxation rate, R{sub 1}(ω)=T{sub 1}{sup −1}(ω), is measured for propylene glycol (PG) which is increasingly diluted with deuterated chloroform. A frequency range of 10 kHz–20 MHz and a broad temperature interval from 220 to about 100 K are covered. The results are compared to those of experiments, where glycerol and o-terphenyl are diluted with their deuterated counter-part. Reflecting intra- as well as intermolecular relaxation, the dispersion curves R{sub 1}(ω,x) (x denotes mole fraction PG) allow to extract the rotational time constant τ{sub rot}(T, x) and the self-diffusion coefficient D(T, x) in a single experiment. The Stokes-Einstein-Debye (SED) relation is tested in terms of the quantity D(T, x) τ{sub rot}(T, x) which provides a measure of an effective hydrodynamic radius or equivalently of the spectral separation of the translational and the rotational relaxation contribution. In contrast to o-terphenyl, glycerol and PG show a spectral separation much larger than suggested by the SED relation. In the case of PG/chloroform mixtures, not only an acceleration of the PG dynamics is observed with increasing dilution but also the spectral separation of rotational and translational relaxation contributions continuously decreases. Finally, following a behavior similar to that of o-terphenyl already at about x = 0.6; i.e., while D(T, x) τ{sub rot}(T, x) in the mixture is essentially temperature independent, it strongly increases with x signaling thus a change of translational-rotational coupling. This directly reflects the dissolution of the hydrogen-bond network and thus a change of solution structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Polarization-sensitive electro-optic detection of terahertz wave using three different types of crystal symmetry: Toward broadband polarization spectroscopy

We investigated polarization-sensitive electro-optic (EO) detection of terahertz (THz) waves by using two uniaxial crystals: a c-cut gallium selenide and a c-cut lithium niobate crystals. We formulated a general frequency-domain description of EO detection by in-plane isotropic EO crystals, which holds regardless of the frequency. Based on this description, the polarization of THz waves can be derived by analyzing EO sampling signals measured with two orthogonal configurations of the in-plane isotropic EO crystals as well as typical (111) zinc-blende EO crystals. In addition, we experimentally demonstrated that the frequency-dependent polarization of THz waves can be reproducibly retrieved using three EO crystals with different crystal symmetries and with different phase matching conditions. Our description provides essential information for practical polarization sensing in the THz frequency range as well as in the mid-infrared range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

THE NANOGRAV NINE-YEAR DATA SET: EXCESS NOISE IN MILLISECOND PULSAR ARRIVAL TIMES

Gravitational wave (GW) astronomy using a pulsar timing array requires high-quality millisecond pulsars (MSPs), correctable interstellar propagation delays, and high-precision measurements of pulse times of arrival. Here we identify noise in timing residuals that exceeds that predicted for arrival time estimation for MSPs observed by the North American Nanohertz Observatory for Gravitational Waves. We characterize the excess noise using variance and structure function analyses. We find that 26 out of 37 pulsars show inconsistencies with a white-noise-only model based on the short timescale analysis of each pulsar, and we demonstrate that the excess noise has a red power spectrum for 15 pulsars. We also decompose the excess noise into chromatic (radio-frequency-dependent) and achromatic components. Associating the achromatic red-noise component with spin noise and including additional power-spectrum-based estimates from the literature, we estimate a scaling law in terms of spin parameters (frequency and frequency derivative) and data-span length and compare it to the scaling law of Shannon and Cordes. We briefly discuss our results in terms of detection of GWs at nanohertz frequencies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Measurement of Relaxation Time of Excess Carriers in Si and CIGS Solar Cells by Modulated Electroluminescence Technique

Excess carrier lifetime plays a crucial role in determining the efficiency of solar cells. In this paper, we use the frequency dependence of inphase and quadrature components of modulated electroluminescence (MEL) to measure the relaxation time (decay) of excess carriers. The advantage of the MEL technique is that the relaxation time is obtained directly from the angular frequency at which the quadrature component peaks. It does not need knowledge of the material parameters like mobility, etc., and can be used for any finished solar cells which have detectable light emission. The experiment is easy to perform with standard electrical equipment. For silicon solar cells, the relaxation time is dominated by recombination and hence, the relaxation time is indeed the excess carrier lifetime. In contrast, for the CIGS solar cells investigated here, the relaxation time is dominated by trapping and emission from shallow minority carrier traps.

14 SOLAR ENERGY↗
DOE OSTI2013

Dielectric investigations in nanostructured tetragonal BaTiO{sub 3} ceramics

Highlights: ► Nanostructured BaTiO{sub 3} ceramics processed by an innovative protocol. ► Dielectric relaxations related to strains and vacancies. ► Dielectric and ferroelectric properties enhanced by strain. - Abstract: In this paper, structural and dielectric properties of BaTiO{sub 3} ceramics obtained under extreme conditions were investigated. The temperature dependent dielectric investigations revealed that the phase transition temperatures of the BaTiO{sub 3} ceramics were raised as a function of residual strains associated to the nanostructuration, while structural characterizations showed a tetragonal arrangement at room temperature. From the frequency dependence analyses of the imaginary parts of dielectric permittivity, impedance and modulus function, three relaxation processes were identified. Two of them exhibit activation energies of 0.45 and 0.63 eV, and were attributed to single and double-ionization of oxygen vacancies. The whole set of results also indicated that the electrons resulting from the ionization of oxygen vacancies are trapped and do not contribute to the electrical conductivity, while the physical properties of the analyzed samples were enhanced by retaining a strained microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Relations between light emission and electron density and temperature fluctuations in a helium plasma

The relations between three atomic lines, He I 667.8 nm (3{sup 1}D{yields} 2{sup 1}P), 706.5 nm (3{sup 3}S{yields} 2{sup 3}P), and 728.1 nm (3{sup 1}S{yields} 2{sup 1}P), and the underlying fluctuations in a helium plasma are investigated for the quantitative interpretation of optical observations in plasma fluctuation measurements. Frequency dependent fluctuation amplitude ratios and phase delays between the line emission fluctuation and the electron density and temperature fluctuations are calculated based on a quasi-static collisional-radiative model and a linear approximation technique. For frequencies up to the upper limit of practical interest (<1 MHz), the fluctuation amplitude ratios and phase delays are similar to those directly evaluated by the quasi-static model. It is found that the difference between the results from the linear approximation technique and from the quasi-static model is due to the absence of metastable fluctuations. Contributions of the 2{sup 1}S and 2{sup 3}S metastable fluctuations to the three helium line emission fluctuations are analyzed. The linearity between fluctuations in the line emission and in the electron density and temperature is valid for fluctuation levels higher than 10%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Physical Parameters of a Reactor-Stellarator with Small Ripples of the Helical Magnetic Field

The paper describes the calculation data on the physical parameters of a reactor-stellarator, where the nonuniformities of the helical field are smaller than the toroidal magnetic field nonuniformities: ε{sub h} < ε{sub t}. Unlike the previous studies, where the ion-component transport coefficients had the collision frequency dependence proportional to ν{sup 1/2}, this being equivalent to the ε{sub h} > ε{sub t} case, in the present calculations, these coefficients were assumed to be in proportion to the first power of the collision frequency, D{sub i} ∝ ν for ν{sub eff} < 2ω{sub E}, and to D{sub i} ∝ ν{sup −1} for the inverse inequality. Here, ω{sub E} is the rotation frequency of plasma in the radial electric field. As before, the plasma electrons corresponded to the mode of D{sub e} ∝ ν{sup −1}. As initial parameters for numerical calculations, a reactor with R = 8 m, r{sub p} = 2 m, and B{sub 0} = 5 Т was taken. A numerical code was used to solve the set of equations that describes the plasma space−time behavior in the reactor-stellarator under the conditions of equal diffusion fluxes. The start of reactor operation in the mode of thermonuclear burning was provided by heating sources with a power of several tens of megawatts. Steady-state operating conditions of a self-sustained thermonuclear reaction were attained by maintaining the plasma density through DT fuel pellet injection into the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Photodielectric Processes in ZnS : Cu Polycrystalline Layers

The frequency dependences of dielectric parameters of zinc sulfide electroluminescent polycrystalline structures doped with copper are studied in the dark and under light excitation in the visible wavelength range. A positive photodielectric effect most pronounced in the low-frequency range was revealed. The experimental results are explained within framework of formation of a space charge in the bulk of a semiconductor. The analysis of data indicates they can be correlated with luminance characteristics of an electroluminescent layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Electrical properties and the determination of interface state density from I–V, C–f and G–f measurements in Ir/Ru/n-InGaN Schottky barrier diode

The electrical properties of the Ir/Ru Schottky contacts on n-InGaN have been investigated by current-voltage (I–V), capacitance-voltage (C–V), capacitance-frequency (C–f) and conductance-frequency (G–f) measurements. The obtained mean barrier height and ideality factor from I–V are 0.61 eV and 1.89. The built-in potential, doping concentration and barrier height values are also estimated from the C–V measurements and the corresponding values are 0.62 V, 1.20 × 1017 cm{sup –3} and 0.79 eV, respectively. The interface state density (N{sub SS}) obtained from forward bias I–V characteristics by considering the series resistance (R{sub S}) values are lower without considering the series resistance (R{sub S}). Furthermore, the interface state density (N{sub SS}) and relaxation time (τ) are also calculated from the experimental C–f and G–f measurements. The N{sub SS} values obtained from the I–V characteristics are almost three orders higher than the N{sub SS} values obtained from the C–f and G–f measurements. The experimental results depict that N{sub SS} and τ are decreased with bias voltage. The frequency dependence of the series resistance (R{sub S}) is attributed to the particular distribution density of interface states.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Dielectric behavior of Ar{sup +} implanted CR-39 polymer

The frequency dependent dielectric response of Ar{sup +} implanted CR-39 specimens has been studied. Samples were implanted with 130 keV Ar{sup +} ions to various doses ranging from 5x10{sup 14} to 1x10{sup 16} cm{sup -2}. The frequency response of dielectric constant (e) and dielectric loss has been studied both in the pristine and argon ion implanted samples of CR-39 polymer in the frequency range 10{sup 4} to 10{sup 8} Hz. Structural changes produced in CR-39 specimens due to implantation have been studied using Attenuated total reflectance (ATR) Fourier transform infrared spectroscopic technique. Results of dielectric analysis indicate the lowering in dielectric constant ({epsilon}') and similar behavior of dielectric loss with increase in ion fluence. An attempt has been made to correlate these changes produced in the dielectric properties of implanted specimens with the structural changes produced due to implantation.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Dielectric properties and electrical conductivity of the hybrid organic-inorganic polyvanadates (H{sub 3}N(CH{sub 2}){sub 4}NH{sub 3})[V{sub 6}O{sub 14}]

Plate-like crystals of the polyvanadate (H{sub 3}N(CH{sub 2}){sub 4}NH{sub 3})[V{sub 6}O{sub 14}] have been synthesized via an hydrothermal treatment. X-ray powder diffraction, scanning electron microscope, Fourier transform infrared spectroscopy, electron spin resonance and complex impedance spectroscopy were used to analyze the hybrid material. The frequency dependence of AC conductivity at different temperatures indicates that the CBH model is the probable mechanism for the AC conduction behavior. The conductivity was measured by complex impedance spectroscopy which is equal to 31.10{sup -3} {Omega}{sup -1} m{sup -1} at 443 K. The Arrhenius diagram is not linear, it presents a rupture situated at 357 K and the activation energies' average values are 0.22 eV and 0.14 eV, deduced from the Arrhenius relation. - Graphical abstract: At high temperature {epsilon} Double-Prime increases more rapidly which is due to the increasing conduction loss which rises with the increment in the DC conductivity. Highlights: Black-Right-Pointing-Pointer Rectangular plate-like crystals (H{sub 3}N(CH{sub 2}){sub 4}NH{sub 3})[V{sub 6}O{sub 14}] were synthesized. Black-Right-Pointing-Pointer frequency and temperature dependence of AC conductivity indicate CBH model. Black-Right-Pointing-Pointer The temperature dependence of DC conductivity exhibits two conduction mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Technical Reports - FY16 Q1 - October-December 2015

Recent experiments have demonstrated that the frequency dependence of motional heating rates in ion traps can vary dramatically with temperature.1-6 More specifically, it has been shown that, at temperatures below roughly 70 K, heating rates are substantially lower than those observed at temperatures above 70 K.1,2 These observations, combined with experiments that show that ion bombardment may also reduce heating rates,4,5 suggest that one potential source of heating may be the presence of unwanted adatoms on trap surfaces. Based upon this evidence, this past quarter, we have used our previously detailed microscopic model of anomalous heating to study which adatoms may be responsible for the observed temperature-dependent scaling of motional heating rates with frequency. We have also examined the validity of one of the key assumptions in our model - that surface adatom dipoles can be accurately obtained from a variational ansatz - by using more direct DFT calculations of the dipole moments. Our current results suggest that the adatoms potentially responsible for the observed motional heating rates should bind weakly to the electrode surface and likely have a mass that exceeds that of Ne. Preliminary DFT calculations suggest that an analytical adatom dipole model,9 previously used in the ion trap noise literature7 to obtain the dipole as a function of adatom-surface distance, may be insufficiently accurate. Therefore, we are working toward obtaining a tabulation of the distance-dependent dipole for several adsorbates using first principles calculations for more accurate input to the heating model. The accurate calculation of the adatom dipole is important because its fluctuation is what couples to and heats the trapped ion qubit. Future work will focus on calculating the frequency spectra of a variety of hydrocarbons, which should have the binding characteristics identified below as necessary for reproducing experimental results. Upcoming efforts will moreover be directed toward deriving an improved microscopic model of heating which will enable direct comparisons of heating rates with measured ion-surface distances and will more accurately account for experimental parameters such as the trapping frequency, ion-electrode distance, and RF power applied to the electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2014

CO component estimation based on the independent component analysis

Fast Independent Component Analysis (FastICA) is a component separation algorithm based on the levels of non-Gaussianity. Here we apply FastICA to the component separation problem of the microwave background, including carbon monoxide (CO) line emissions that are found to contaminate the PLANCK High Frequency Instrument (HFI) data. Specifically, we prepare 100 GHz, 143 GHz, and 217 GHz mock microwave sky maps, which include galactic thermal dust, NANTEN CO line, and the cosmic microwave background (CMB) emissions, and then estimate the independent components based on the kurtosis. We find that FastICA can successfully estimate the CO component as the first independent component in our deflection algorithm because its distribution has the largest degree of non-Gaussianity among the components. Thus, FastICA can be a promising technique to extract CO-like components without prior assumptions about their distributions and frequency dependences.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Phase-only laser control in the weak-field limit: Two-pulse control of IBr photofragmentation revisited

We demonstrate theoretically that laser-induced coherent quantum interference control of asymptotic states of dissociating molecules is possible, starting from a single vibrational eigenstate, after the interaction with two laser pulses—at a fixed time delay—both operating in the weak-field limit. Thus, phase dependence in the interaction with the second fixed-energy phase-modulated pulse persists after the pulse is over. This is illustrated for the nonadiabatic process: I + Br{sup *}←IBr → I + Br, where the relative yield of excited Br{sup *} can be changed by pure phase modulation. Furthermore, a strong frequency dependence of the branching ratio is observed and related to the re-crossing dynamics of the avoided crossing in the above-mentioned process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2011

Dielectric and transport properties of thin films precipitated from sols with silicon nanoparticles

Dielectric properties of thin films precipitated on solid substrates from colloidal solutions containing silicon nanoparticles (average diameter is 10 nm) are studied by optical ellipsometry and impedance-spectroscopy. In the optical region, the values of real {epsilon} Prime and imaginary {epsilon} Double-Prime components of the complex permittivity {epsilon} vary within 2.1-1.1 and 0.25-0.75, respectively. These values are significantly lower than those of crystalline silicon. Using numerical simulation within the Bruggeman effective medium approximation, we show that the experimental {epsilon} Prime and {epsilon} Double-Prime spectra can be explained with good accuracy, assuming that the silicon film is a porous medium consisting of silicon monoxide (SiO) and air voids at a void ratio of 0.5. Such behavior of films is mainly caused by the effect of outer shells of silicon nanoparticles interacting with atmospheric oxygen on their dielectric properties. In the frequency range of 10-10{sup 6} Hz, the experimentally measured {epsilon} Prime and {epsilon} Double-Prime spectra of thin nanoscale silicon films are well approximated by the semi-empirical Cole-Cole dielectric dispersion law with the term related to free electric charges. The experimentally determined power-law frequency dependence of the ac conductivity means that the electrical transport in films is controlled by electric charge hopping through localized states in the unordered medium of outer shells of silicon nanoparticles composing films. It is found that the film conductivity at frequencies of {<=}2 Multiplication-Sign 10{sup 2} Hz is controlled by proton transport through Si-OH groups on the silicon nanoparticle surface.

36 MATERIALS SCIENCE↗