Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Soot Aerosol Properties in Laminar Soot-Emitting Microgravity Nonpremixed Flames

The spatial distributions and morphological properties of the soot aerosol are examined experimentally in a series of 0-g laminar gas-jet nonpremixed flames. The methodology deploys round jet diffusion flames of nitrogen-diluted acetylene fuel burning in quiescent air at atmospheric pressure. Full-field laser-light extinction is utilized to determine transient soot spatial distributions within the flames. Thermophoretic sampling is employed in conjunction with transmission electron microscopy to define soot microstructure within the soot-emitting 0-g flames. The microgravity tests indicate that the 0-g flames attain a quasi-steady state roughly 0.7 s after ignition, and sustain their annular structure even beyond their luminous flame tip. The measured peak soot volume fractions show a complex dependence on burner exit conditions, and decrease in a nonlinear fashion with decreasing characteristic flow residence times. Fuel preheat by approximately 140 K appears to accelerate the formation of soot near the flame axis via enhanced fuel pyrolysis rates. The increased soot presence caused by the elevated fuel injection temperatures triggers higher flame radiative losses, which may account for the premature suppression of soot growth observed along the annular region of preheated-fuel flames. Electron micrographs of soot aggregates collected in 0-g reveal the presence of soot precursor particles near the symmetry axis at midflame height, The observations also verify that soot primary particle sizes are nearly uniform among aggregates present at the same flame location, but vary considerably with radius at a fixed distance from the burner. The maximum primary size in 0-g is found to be by 40% larger than in 1-g, under the same burner exit conditions. Estimates of the number concentration of primary particles and surface area of soot particulate phase per unit volume of the combustion gases are also made for selected in-flame locations.

Konsur, Bogdan↗

Numerical Study of Buoyancy and Different Diffusion Effects on the Structure and Dynamics of Triple Flames

Numerical simulations of 2-D triple flames under gravity force have been implemented to identify the effects of gravity on triple flame structure and propagation properties and to understand the mechanisms of instabilities resulting from both heat release and buoyancy effects. A wide range of gravity conditions, heat release, and mixing widths for a scalar mixing layer are computed for downward-propagating (in the same direction with the gravity vector) and upward-propagating (in the opposite direction of the gravity vector) triple flames. Results of numerical simulations show that gravity strongly affects the triple flame speed through its contribution to the overall flow field. A simple analytical model for the triple flame speed, which accounts for both buoyancy and heat release, is developed. Comparisons of the proposed model with the numerical results for a wide range of gravity, heat release and mixing width conditions, yield very good agreement. The analysis shows that under neutral diffusion, downward propagation reduces the triple flame speed, while upward propagation enhances it. For the former condition, a critical Froude number may be evaluated, which corresponds to a vanishing triple flame speed. Downward-propagating triple flames at relatively strong gravity effects have exhibited instabilities. These instabilities are generated without any artificial forcing of the flow. Instead disturbances are initiated by minute round-off errors in the numerical simulations, and subsequently amplified by instabilities. A linear stability analysis on mean profiles of stable triple flame configurations have been performed to identify the most amplified frequency in spatially developed flows. The eigenfunction equations obtained from the linearized disturbance equations are solved using the shooting method. The linear stability analysis yields reasonably good agreements with the observed frequencies of the unstable triple flames. The frequencies and amplitudes of disturbances increase with the magnitude of the gravity vector. Moreover, disturbances appear to be most amplified just downstream of the premixed branches. The effects of mixing width and differential diffusion are investigated and their roles on the flame stability are studied.

Chen, Jyh-Yuan↗

Upward And Downward Flame Spreading And Extinction In Partial Gravity Environments

The premise of this research effort has been to begin exploring the gap in the literature between studies of material flammability and flame spread phenomena in normal-gravity and those conducted in the microgravity environment, with or without forced flows. From a fundamental point of view, flame spreading in upward (concurrent) buoyant flow is considerably different from concurrent forced flow. The flow accelerates throughout the length of the buoyant flame bringing the streamlines and the flame closer to the fuel surface and strengthening the interaction between the flame and fuel. Forced flows are diverted around the flame and away from the fuel surface, except where the flow might be constrained by a finite duct. The differences may be most clearly felt as the atmospheric conditions, viz. pressure or oxygen content, approach the flammability limit. From a more practical point of view, flame spreading and material flammability behavior have not been studied under the partial gravity conditions that are the natural state in space exploration destinations such as the Moon and Mars. This effort constitutes the beginning of the research needed to engineer fire safety provisions for such future missions. In this program we have performed partial-gravity experiments (from 0.1 to 1 g/g(sub Earth)) considering both upward and downward flame spread over thin solid fuels aboard the NASA KC-135 aircraft. In those tests, the atmospheric pressure and the fuel sample width were varied. Steady flame spread rates and approximate extinction boundaries were determined. Flame images were recorded using video cameras and two-dimensional fuel surface temperature distributions were determined using an IR camera. These results are available, and complement our earlier work in downward spread in partial gravity varying oxygen content. In conjunction with the experiment, three-dimensional models of flame spreading in buoyant flow have been developed. Some of the computed results on upward spreading have been presented. A derivative three-dimensional model of downward spreading has been developed. It is currently being used to evaluate the standard limiting oxygen index (LOI) measuring device and its potential performance in different gravity levels.

Sacksteder, Kurt R.↗

Flame Retardant Fibers for Human Space Exploration - Past, Present, and Future

The National Aeronautics and Space Administration (NASA) has led in the development of unique flame retardant fibers for human spaceflight since the beginning of the Apollo program. After the Apollo 1 fire which killed Command Pilot Virgil I 'Gus' Grissom, Senior Pilot Edward H. White II, and Pilot Roger B. Chaffee from cardiac arrest on January 27, 1967, the accident investigators found severe third degree burns and melted spacesuits on the astronauts bodies. NASA immediately initiated an extensive research program aimed at developing flame retardant and flame resistant fibers for the enriched oxygen atmosphere of the Apollo crew cabin. Fibers are flame retardant when they have been modified by chemical and thermal treatments. Fibers are flame resistant when they are made of inherently flame resistant materials (i.e. glass, ceramic, highly aromatic polymers). Immediately after this tragic accident, NASA funded extensive research in specifically developing flame retardant fibers and fabrics. The early developmental efforts for human spaceflight were for the outer layer of the Apollo spacesuit. It was imperative that non-flammable fabrics be used in a 100% oxygen environment. Owens-Corning thus developed the Beta fiber that was immediately used in the Apollo program and later in the Space Shuttle program. Aside from the urgent need for protective fabrics for the spacesuit, NASA also needed flame retardant fabrics for both clothing and equipment inside the spacecraft. From the mid-1960s to the early 1980's, NASA contracted with many companies to develop inherently flame retardant fibers and flame retardant finishes for existing fibers. Fluorocarbons and aromatic polyamides were the polymers of great interest for the development of new inherently flame retardant fibers for enriched oxygen environments. These enriched environments varied for different space programs. For example, the Apollo program requirements were for materials that would not support combustion in a 70%/30% oxygen/nitrogen environment at 6.3 pounds per square inch (psi). The Skylab program flammability requirements were set at 80%/20% oxygen/nitrogen ratios at 5 psi. While many fibers produced under several NASA contracts were never used, a few have become commercial products. The intent of this paper is to present the developmental history of some of these new or modified textile fibers. These developmental efforts are presented at various levels of details depending on the source of the historical records.

Orndoff, Evelyne↗

Direct Numerical Simulation of Flame-Wall Interaction for Low-Carbon Gas Turbine Combustion

Green hydrogen (H2) and ammonia (NH3) are emerging as carbon free alternatives to hydrocarbon fuels. In gas turbines, flames interact with the combustor liner (wall), which affects the pollutant emissions, the burning efficiency, and the thermal load on the liner. We lack understanding of this important flame-wall interaction (FWI) for alternative fuels. FWI occurs at the scale of the flame thickness, and such scales are only resolved by direct numerical simulation. Here, we resolve the FWI for NH3 and H2 flames. Preliminary results of two distinct projects are presented: 2D laminar anchored V-flame, and 3D turbulent swirling flame. For the laminar flame, we show flame quenching at the wall and resulting leakage of NH3 and increased N2O, but decreased NO emissions. For the swirling flame, we show CO emissions, and comparison of flame shapes and location to experimental measurements. Ultimately we show that quenching and pollutant emissions strongly affected by fuel/air ratio, and that an inclined wall can stabilize very lean turbulent CH4/H2 flames, but prone to large CO emissions.

adaptive mesh refinement↗

Ignition kernel formation and lift-off behaviour of jet-in-hot-coflow flames

The stabilisation region of turbulent non-premixed flames of natural gas mixtures burning in a hot and diluted coflow is studied by recording the flame luminescence with an intensified high-speed camera. The flame base is found to behave fundamentally differently from that of a conventional lifted jet flame in a cold air coflow. Whereas the latter flame has a sharp interface that moves up and down, ignition kernels are continuously being formed in the jet-in-hot-coflow flames, growing in size while being convected downstream. To study the lift-off height effectively given these highly variable flame structures, a new definition of lift-off height is introduced. An important parameter determining lift-off height is the mean ignition frequency density in the flame stabilisation region. An increase in coflow temperature and the addition of small quantities of higher alkanes both increase ignition frequencies, and decrease the distance between the jet exit and the location where the first ignition kernels appear. Both mechanisms lower the lift-off height. An increase in jet Reynolds number initially leads to a significant decrease of the location where ignition first occurs. Higher jet Reynolds numbers (above 5000) do not strongly alter the location of first ignition but hamper the growth of flame pockets and reduce ignition frequencies in flames with lower coflow temperatures, leading to larger lift-off heights. (author)

03 NATURAL GAS↗

The effect of temperature on soot properties in premixed methane flames

The effect of flame temperature on soot properties was studied in premixed methane/oxygen flames burning at a constant mixture composition (C/O = 0.60, {phi} = 2.4) and different cold-gas flow velocities (4 and 5 cm s{sup -1}). Temperature and concentration profiles of stable gases and condensed phases combustion products were measured along the flame axis. It was found that the high flame temperature conditions cause a larger decomposition of methane into hydrogen and C{sub 2}-C{sub 4} hydrocarbons, thereby reducing the formation of benzene and condensed phases including condensed species and soot. Soot properties were studied by UV-Visible absorption spectroscopy, thermogravimetry and H/C elemental analysis. A description of soot nanostructural organization was also performed by means of high-resolution transmission electron microscopy. Different properties and nanostructures were found to develop in the soot, depending on the temperature and on soot aging associated. Soot dehydrogenation occurred to a larger extent in the high flame temperature conditions. As soot dehydrogenates the mass absorption coefficients of soot exhibited an increasing trend along the flame axis. However, mature soot retained a relatively high H/C ratio and low absorption coefficients with respect to other less hydrogenated fuels even in high temperature conditions. This indicates that the aromatization/dehydrogenation of soot in premixed flames is more dependent on the fuel characteristics rather than on the flame temperature. Generally, it was assessed that mature soot produced from diverse hydrocarbon fuels with similar flame temperatures and flame types possess a different chemical composition and structure. To this regard the H/C atomic ratio and mass absorption coefficients appeared to be signatures of soot properties and structural evolution. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatially distributed flame transfer functions for predicting combustion dynamics in lean premixed gas turbine combustors

The present paper describes a methodology to improve the accuracy of prediction of the eigenfrequencies and growth rates of self-induced instabilities and demonstrates its application to a laboratory-scale, swirl-stabilized, lean-premixed, gas turbine combustor. The influence of the spatial heat release distribution is accounted for using local flame transfer function (FTF) measurements. The two-microphone technique and CH{sup *} chemiluminescence intensity measurements are used to determine the input (inlet velocity perturbation) and the output functions (heat release oscillation), respectively, for the local flame transfer functions. The experimentally determined local flame transfer functions are superposed using the flame transfer function superposition principle, and the result is incorporated into an analytic thermoacoustic model, in order to predict the linear stability characteristics of a given system. Results show that when the flame length is not acoustically compact the model prediction calculated using the local flame transfer functions is better than the prediction made using the global flame transfer function. In the case of a flame in the compact flame regime, accurate predictions of eigenfrequencies and growth rates can be obtained using the global flame transfer function. It was also found that the general response characteristics of the local FTF (gain and phase) are qualitatively the same as those of the global FTF. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effects of turbulence on the flame structure and NO formation of ammonia turbulent premixed combustion at various equivalence ratios

Ammonia is carbon-free and is regarded as a potential fuel to address global warming issues. Here, in this work, three-dimensional direct numerical simulations (DNS) of ammonia/air turbulent premixed flames were performed to explore the influence of turbulence and equivalence ratio on the flame structure and NO formation characteristics. Two equivalence ratios were considered, i.e. Φ=0.9 and Φ=1.1. The general flame structures were presented and species distributions were examined. The NO mass fraction was found to be the highest in the product for the lean case and in the reaction zone for the rich case. The conditional mean values of species mass fractions and reaction rates were compared with those of the unstrained and strained laminar premixed flames to explore how well the laminar flame structures can approach those of the turbulent flame. The budget analysis of the species transport equations showed that turbulent diffusion plays an important role in species transport. The turbulent diffusivity D T was estimated using the gradient hypothesis based on the DNS data. Various laminar flame simulations with different diffusivities were carried out. It was shown that the conditional means of the DNS agree well with those of the laminar flames including D T in the transport property calculation. The global and local NO formation characteristics were investigated. It was found that the mean NO production conditioned on the progress variable is lower compared with the corresponding laminar flame in the rich case. However, the relative contributions from various NO pathways are rarely affected by turbulence. The NO mass fraction is higher in negative curvature regions compared with positive curvature regions of the flame surface for the rich case, which is due to the preferential diffusion of H 2 and other radicals and the enhanced NO pathways in negatively curved regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Turbulence-Flame Interactions in Type Ia Supernovae

The large range of time and length scales involved in type Ia supernovae (SN Ia) requires the use of flame models. As a prelude to exploring various options for flame models, we consider, in this paper, high-resolution three-dimensional simulations of the small-scale dynamics of nuclear flames in the supernova environment in which the details of the flame structure are fully resolved. The range of densities examined, 1 to 8 x 107 g cm-3, spans the transition from the laminar flamelet regime to the distributed burning regime where small scale turbulence disrupts the flame. The use of a low Mach number algorithm facilitates the accurate resolution of the thermal structure of the flame and the inviscid turbulent kinetic energy cascade, while implicitly incorporating kinetic energy dissipation at the grid-scale cutoff. For an assumed background of isotropic Kolmogorov turbulence with an energy characteristic of SN Ia, we find a transition density between 1 and 3 x 107 g cm-3 where the nature of the burning changes ualitatively. By 1 x 107 g cm-3, energy diffusion by conduction and radiation is exceeded, on the flame scale, by turbulent advection. As a result, the effective Lewis Number approaches unity. That is, the flame resembles a laminar flame, but is turbulently broadened with an effective diffusion coefficient, D_T \sim u' l, where u' is the turbulent intensity and l is the integral scale. For the larger integral scales characteristic of a real supernova, the flame structure is predicted to become complex and unsteady. Implications for a possible transition to detonation are discussed.

99 GENERAL AND MISCELLANEOUS↗

Explosion bomb measurements of ethanol-air laminar gaseous flame characteristics at pressures up to 1.4 MPa

The principal burning characteristics of a laminar flame comprise the fuel vapour pressure, the laminar burning velocity, ignition delay times, Markstein numbers for strain rate and curvature, the stretch rates for the onset of flame instabilities and of flame extinction for different mixtures. With the exception of ignition delay times, measurements of these are reported and discussed for ethanol-air mixtures. The measurements were in a spherical explosion bomb, with central ignition, in the regime of a developed stable, flame between that of an under or over-driven ignition and that of an unstable flame. Pressures ranged from 0.1 to 1.4 MPa, temperatures from 300 to 393 K, and equivalence ratios were between 0.7 and 1.5. It was important to ensure the relatively large volume of ethanol in rich mixtures at high pressures was fully evaporated. The maximum pressure for the measurements was the highest compatible with the maximum safe working pressure of the bomb. Many of the flames soon became unstable, due to Darrieus-Landau and thermo-diffusive instabilities. This effect increased with pressure and the flame wrinkling arising from the instabilities enhanced the flame speed. Both the critical Peclet number and the, more rational, associated critical Karlovitz stretch factor were evaluated at the onset of the instability. With increasing pressure, the onset of flame instability occurred earlier. The measured values of burning velocity are expressed in terms of their variations with temperature and pressure, and these are compared with those obtained by other researchers. Some comparisons are made with the corresponding properties for iso-octane-air mixtures. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental investigation on flame pattern formations of DME-air mixtures in a radial microchannel

Flame pattern formations of premixed DME-air mixture in a heated radial channel with a gap distance of 2.5 mm were experimentally investigated. The DME-air mixture was introduced into the radial channel through a delivery tube which connected with the center of the top disk. With an image-intensified high-speed video camera, rich flame pattern formations were identified in this configuration. Regime diagram of all these flame patterns was drawn based on the experimental findings in the equivalence ratio range of 0.6-2.0 and inlet velocity range of 1.0-5.0 m/s. Compared with our previous study on premixed methane-air flames, there are several distinct characteristics for the present study. First, Pelton-wheel-like rotary flames and traveling flames with kink-like structures were observed for the first time. Second, in most cases, flames can be stabilized near the inlet port of the channel, exhibiting a conical or cup-like shape, while the conventional circular flame was only observed under limited conditions. Thirdly, an oscillating flame phenomenon occurred under certain conditions. During the oscillation process, a target appearance was seen at some instance. These pattern formation characteristics are considered to be associated with the low-temperature oxidation of DME. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent contributions of flame-sampling molecular-beam mass spectrometry to a fundamental understanding of combustion chemistry

Flame-sampling molecular-beam mass spectrometry of premixed, laminar, low-pressure flat flames has been demonstrated to be an efficient tool to study combustion chemistry. In this technique, flame gases are sampled through a small opening in a quartz probe, and after formation of a molecular beam, all flame species are separated using mass spectrometry. The present review focuses on critical aspects of the experimental approach including probe sampling effects, different ionization processes, and mass separation procedures. The capability for isomer-resolved flame species measurements, achievable by employing tunable vacuum-ultraviolet radiation for single-photon ionization, has greatly benefited flame-sampling molecular-beam mass spectrometry. This review also offers an overview of recent combustion chemistry studies of flames fueled by hydrocarbons and oxygenates. The identity of a variety of intermediates in hydrocarbon flames, including resonantly stabilized radicals and closed-shell intermediates, is described, thus establishing a more detailed understanding of the fundamentals of molecular-weight growth processes. Finally, molecular-beam mass-spectrometric studies of reaction paths in flames of alcohols, ethers, and esters, which have been performed to support the development and validation of kinetic models for bio-derived alternative fuels, are reviewed.

10 SYNTHETIC FUELS↗

The effects of strain rate and curvature on surface density function transport in turbulent premixed methane-air and hydrogen-air flames: A comparative study

The effects of tangential strain rate and curvature on the surface density function (SDF) and on source terms within the SDF transport equation are studied for lean methane-air and hydrogen-air flames using two-dimensional direct numerical simulations with detailed chemistry. A positive correlation is observed between the SDF and the tangential strain rate, and this is explained in terms of the interaction between the local tangential strain rate and the dilatation rate due to heat release. Curvature is also seen to affect the SDF through the curvature response of both tangential strain rate and dilatation rate on a given flame isosurface. Strain rate and curvature are found to have an appreciable effect on several terms of the SDF transport equation. The SDF straining term in both methane and hydrogen flames is correlated positively with tangential strain rate, as expected, and is also correlated negatively with curvature. For methane flames, the SDF propagation term is found to correlate negatively with flame curvature toward the reactant side of the flame and positively toward the product side. By contrast, for hydrogen flames the SDF propagation term is negatively correlated with curvature throughout the flame brush. The variation of the SDF curvature term with local flame curvature for both methane and hydrogen flames is found to be nonlinear due to the additional stretch induced by the tangential diffusion component of the displacement speed. Physical explanations are provided for all of these effects, and the modeling implications are considered in detail. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of in situ reforming in plasma enhanced ultra lean premixed methane/air flames

This paper describes a mechanism for the stabilization of ultra lean premixed methane/air flames by pulsed nonequilibrium plasma enhancement. It is shown that the pulsed discharge plasma produces a cool ({proportional_to}500-600 K) stream of relatively stable intermediate species including hydrogen (H{sub 2}) and carbon monoxide (CO), which play a central role in enhancing flame stability. This stream is readily visualized by ultraviolet emission from electronically excited hydroxyl (OH) radicals. The rotational and vibrational temperature of this ''preflame'' are determined from its emission spectrum. Qualitative imaging of the overall flame structure is obtained by planar laser-induced fluorescence measurements of OH. Preflame nitric oxide (NO) concentrations are determined by gas sampling chromatography. A simple numerical model of this plasma enhanced premixed flame is proposed that includes the generation of the preflame through plasma activation, and predicts the formation of a dual flame structure that arises when the preflame serves to pilot the combustion of the surrounding non-activated premixed flow. The calculation represents the plasma through its ability to produce an initial radical yield, which serves as a boundary condition for conventional flame simulations. The simulations also capture the presence of the preflame and the dual flame structure, and predict preflame levels of NO comparable to those measured. A subsequent pseudo-sensitivity analysis of the preflame shows that flame stability is most sensitive to the concentrations of H{sub 2} and CO in the preflame. As a consequence of the role of H{sub 2} and CO in enhancing the flame stability, the blowout limit extensions of methane/air and hydrogen/air mixtures in the absence/presence of a discharge are investigated experimentally. For methane/air mixtures, the blowout limit of the current burner is extended by {proportional_to}10% in the presence of a discharge while comparable studies carried out in lean hydrogen/air flames fail to extend this limit. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and numerical study of the role of NCN in prompt-NO formation in low-pressure CH{sub 4}-O{sub 2}-N{sub 2} and C{sub 2}H{sub 2}-O{sub 2}-N{sub 2} flames

We report an experimental and modeling study on prompt-NO formation in low-pressure (5.3 kPa) premixed flames. Special emphasis is given to the quantitative detection (and prediction) of NCN, whose role in prompt-NO formation has recently been confirmed in alkane flames. Here a rich ({phi} = 1.25) CH{sub 4}-O{sub 2}-N{sub 2} flame and rich ({phi} = 1.25) and stoichiometric C{sub 2}H{sub 2}-O{sub 2}-N{sub 2} flames have been investigated. Absolute concentration profiles of CH and NCN radicals and NO species are obtained by combining laser-induced fluorescence (LIF) and cavity ring-down spectroscopy (CRDS). Temperature profile is determined in each flame using OH and NO-LIF thermometry. Flame modeling is performed to determine the role of NCN in prompt-NO formation and to test the capacity of the present chemical mechanisms to predict some intermediate species involved in prompt-NO formation. The methane flame is modeled using GDFkin registered 3.0{sub N}CN mechanism [El Bakali et al., Fuel 85 (2006), 896-909]. The acetylene flames are modeled using the Lindstedt and Skevis C/H/O mechanism [Lindstedt and Skevis, Proc. Combust. Inst. 28 (2000), 1801-1807], completed by the submechanism issued from GDFkin registered 3.0{sub N}CN for nitrogen chemistry. This submechanism includes the initiation reaction CH + N{sub 2} = NCN + H. Rate constants of NO-sensitive reactions of the submechanism are modified by taking into account the recent literature. In particular, the C{sub 2}O route could be explored thanks to a significant presence of C{sub 2}O in acetylene flames. Globally, the modified submechanism of nitrogen chemistry coupled with the two hydrocarbon mechanisms leads to a satisfying prediction of NCN and NO mole fraction profiles, even though refinements of rate constant determination is still required. The role of NCN in prompt-NO formation in acetylene flames is demonstrated. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid fs/ps rotational CARS temperature and oxygen measurements in the product gases of canonical flat flames

A hybrid fs/ps pure-rotational coherent anti-Stokes Raman scattering (CARS) scheme is systematically evaluated over a wide range of flame conditions in the product gases of two canonical flat-flame burners. Near-transform-limited, broadband femtosecond pump and Stokes pulses impulsively prepare a rotational Raman coherence, which is later probed using a high-energy, frequency-narrow picosecond beam generated by the second-harmonic bandwidth compression scheme that has recently been demonstrated for rotational CARS generation in H 2 /air flat flames. The measured spectra are free of collision effects and nonresonant background and can be obtained on a single-shot basis at 1 kHz. The technique is evaluated for temperature/oxygen measurements in near-adiabatic H 2 /air flames stabilized on the Hencken burner for equivalence ratios of φ = 0.20–1.20. Thermometry is demonstrated in hydrocarbon/air products for φ = 0.75–3.14 in premixed C 2 H 4 /air flat flames on the McKenna burner. Reliable spectral fitting is demonstrated for both shot-averaged and single-laser-shot data using a simple phenomenological model. Measurement accuracy is benchmarked by comparison to adiabatic-equilibrium calculations for the H 2 /air flames, and by comparison with nanosecond CARS measurements for the C 2 H 4 /air flames. Quantitative accuracy comparable to nanosecond rotational CARS measurements is observed, while the observed precision in both the temperature and oxygen data is extraordinarily high, exceeding nanosecond CARS, and on par with the best published thermometric precision by femtosecond vibrational CARS in flames, and rotational femtosecond CARS at low temperature. Threshold levels of signal-to-noise ratio to achieve 1–2% precision in temperature and O 2 /N 2 ratio are identified. Our results show that pure-rotational fs/ps CARS is a robust and quantitative tool when applied across a wide range of flame conditions spanning lean H 2 /air combustion to fuel-rich sooting hydrocarbon flames.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical and experimental investigation of the flame kernel growth in a methane/air mixture near the lean flammability limit

Lean combustion has the potential to improve the thermal efficiency of spark-ignition engines, but it faces the significant challenge of increased cycle-to-cycle variation due to low mixture reactivity and unstable flame dynamics. Computational fluid dynamics (CFD) employing predictive models can guide engine design and optimize operating strategies for lean combustion. However, ignition and combustion models have rarely been validated at fuel-lean conditions, and a fundamental understanding of the early flame kernel growth process is also lacking for a successful sub-model development. Here, the present study develops a numerical simulation framework used to investigate early flame kernel growth in methane/air mixtures. A nanosecond-pulsed discharge (NPD) approach is employed to effectively decouple the flame kernel growth from the electrical discharge due to their difference in timescales, and equivalence ratios near the experimentally measured lean flammability limit (LFL) are selected to focus on challenging mixture conditions. Three numerical investigations, such as the choice of turbulence modeling, grid size, and grid control strategies, are examined to match both LFL and flame kernel structure measured from experiments. It is demonstrated that a quasi-direct numerical simulation (QDNS) with a fixed grid embedding of 10 μm can predict the LFL as φ CFD =0.61 and match the displacement speed of the kernel’s boundary marked in schlieren images. To predict the LFL and flame kernel shape, a fine grid (Δ≤12.5 μm) is needed to capture the consumption of formaldehyde (CH 2 O) in kernel’s reaction branches attached to the anode, and adaptive mesh refinement is replaced with the fixed embedding due to loss of simulation accuracy. Also, it is found that a large-eddy simulation (LES) using the Dynamic Structure model is not suitable for the NPD-induced flame kernel simulation because artificial sub-grid turbulent kinetic energy induced by shock dynamics alters the flow velocity calculation, resulting in divergence of LES from QDNS. Lastly, the simulation well matches the experimental data for the flame kernel evolution in three mixture conditions (φ = 0.7, 0.61, 0.55), showing toroidal flame kernel expansion and flame kernel growth/extinction.

33 ADVANCED PROPULSION SYSTEMS↗