Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FERROMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Magnetic characteristics of phase-separated CeO 2 :Co thin films

Herewith, we are reporting the magnetic properties of phase-separated Co-doped CeO 2 films (with a Ce:Co atomic-ratio of 0.97:0.03) grown on single-crystal SrTiO 3 (001) substrates. A comparison of the magnetic characteristics of these films with those of homogenously doped CeO 2 :Co films of the same composition illustrates the significant differences in their magnetic behavior. Here, these behavioral characteristics provide a model for determining if the magnetic behavior observed in this, as well as in other diluted magnetic dielectric systems, is due to homogeneous doping, a mixture of doping and transition metal cluster formation, or exists purely as a result of transition metal clustering.

36 MATERIALS SCIENCE↗

E-field controlled phase transformation in bismuth ferrite thin films, and effect of laser energy density

Heterostructures of BiFeO 3 /Pb(Mg 1/3 Nb 2/3 )O 3 -30%PbTiO 3 (BFO/PMN-30PT) were fabricated here by pulsed laser deposition. Electric fields (E) were applied on the PMN-30PT substrates along the in-plane and out-of-plane directions, and the induced strain of BFO was measured as a function of E by X-ray diffraction. Reciprocal space maps along the (110) zone axis evidenced that a monoclinic M A phase was induced in both PMN-PT and BFO, where the dominate domain structures could be switched between biaxial directions under application of in-plane E. Studies were done for films prepared under different laser energy densities (LED), in order to optimize the in-plane strain of BFO. A relatively low LED of 1 J/cm 2 produced a better BFO thin film with larger in-plane strain.

36 MATERIALS SCIENCE↗

Local cation order and ferrimagnetism in compositionally complex spinel ferrites

We present an exploration of a family of compositionally complex cubic spinel ferrites featuring combinations of Mg, Fe, Co, Ni, Cu, Mn, and Zn cations, systematically investigating the average and local atomic structures, chemical short-range order, magnetic spin configurations, and magnetic properties. All compositions result in ferrimagnetic average structures with extremely similar local bonding environments; however, the samples display varying degrees of cation inversion and, therefore, differing apparent bulk magnetization. Additionally, first-order reversal curve analysis of the magnetic reversal behavior indicates varying degrees of magnetic ordering and interactions, including potentially local frustration. Finally, reverse Monte Carlo modeling of the spin orientation demonstrates a relationship between the degree of cation inversion and the spin collinearity. Collectively, these observations correlate with differences in synthesis procedures. This work provides a framework for understanding magnetic behavior reported for “high-entropy spinels,” revealing many are likely compositionally complex oxides with differing degrees of chemical short-range order—not meeting the community established criteria for high or medium entropy compounds. Moreover, this work highlights the importance of reporting complete sample processing histories and investigating local to long-range atomic arrangements when evaluating potential entropic mixing effects and assumed property correlations in high entropy materials.

36 MATERIALS SCIENCE↗

Revisiting Néel 60 years on: The magnetic anisotropy of L1 0 FeNi (tetrataenite)

The magnetocrystalline anisotropy energy of atomically ordered L1 0 FeNi (the meteoritic mineral tetrataenite) is studied within a first-principles electronic structure framework. Two compositions are examined: equiatomic Fe 0.5 Ni 0.5 and an Fe-rich composition, Fe 0.56 Ni 0.44 . It is confirmed that, for the single crystals modeled in this work, the leading-order anisotropy coefficient K 1 dominates the higher-order coefficients K 2 and K 3 . To enable comparison with experiment, the effects of both imperfect atomic long-range order and finite temperature are included. While our computational results initially appear to undershoot the measured experimental values for this system, careful scrutiny of the original analysis due to Néel et al. [J. Appl. Phys. 35, 873 (1964)] suggests that our computed value of K 1 is, in fact, consistent with experimental values, and that the noted discrepancy has its origins in the nanoscale polycrystalline, multivariant nature of experimental samples, that yields much larger values of K 2 and K 3 than expected a priori. These results provide fresh insight into the existing discrepancies in the literature regarding the value of tetrataenite’s uniaxial magnetocrystalline anisotropy in both natural and synthetic samples.

36 MATERIALS SCIENCE↗

Proximity enhanced magnetism at NiFe 2 O 4 /Graphene interface

Here, we explore the change in effective magnetic anisotropy of the ferrimagnetic (FM) insulator nickel ferrite (NFO) thin film due to the inclusion of monolayer graphene (MLG) grown on top of the NFO layer. This was done by performing radio frequency (RF) transverse susceptibility (TS) measurements on bare NFO and NFO/MLG bilayer samples for both in-plane (IP) and out-of-plane (OOP) configurations utilizing a tunnel diode oscillator technique. Our magnetometry measurements indicated an enhancement in the overall saturation magnetization of the NFO/MLG bilayer with respect to the bare NFO film. The TS measurements reveal that the inclusion of MLG reduces the effective magnetic anisotropy for both IP and OOP configurations drastically, by up to a factor of 2 over the temperature range 40 K ≤ T ≤ 280 K. Since NFO is a magnetic substrate, it is possible that NFO could induce magnetic ordering in MLG at the NFO/MLG interface via the magnetic proximity effect. Furthermore, since NFO is insulating and MLG is a semimetal, there likely exists a large conductivity difference at the interface, making charge transfer plausible. These two effects could modify the interfacial magnetism leading to a change in the effective magnetic anisotropy. These results highlight the importance of understanding the interfacial magnetism of FM/MLG heterostructures.

36 MATERIALS SCIENCE↗

The northeast materials database for magnetic materials

The discovery of magnetic materials with high operating temperature ranges and optimized performance is essential for advanced applications. Current data-driven approaches are limited by the lack of accurate, comprehensive, and feature-rich databases. This study aims to address this challenge by using Large Language Models (LLMs) to create a comprehensive, experiment-based, magnetic materials database named the Northeast Materials Database (NEMAD), which consists of 67,573 magnetic materials entries (www.nemad.org). The database incorporates chemical composition, magnetic phase transition temperatures, structural details, and magnetic properties. Enabled by NEMAD, we trained machine learning models to classify materials and predict transition temperatures. Our classification model achieved an accuracy of 90% in categorizing materials as ferromagnetic (FM), antiferromagnetic (AFM), and non-magnetic (NM). The regression models predict Curie (Néel) temperature with a coefficient of determination (R 2 ) of 0.87 (0.83) and a mean absolute error (MAE) of 56K (38K). These models identified 25 (13) FM (AFM) candidates with a predicted Curie (Néel) temperature above 500K (100K) from the Materials Project. This work shows the feasibility of combining LLMs for automated data extraction and machine learning models to accelerate the discovery of magnetic materials.

Ferromagnetism↗

Ferromagnetic (Mn, N)-codoped ZnO nanopillars array: Experimental and computational insights

To reveal the mechanism responsible for ferromagnetism in transition metal and hole codoped oxide semiconductors, we carry out a comparative study on Mn-doped and (Mn, N)-codoped ZnO nanopillars. Compared with Mn-doped ZnO samples, (Mn, N)-codoped ZnO nanopillars exhibit an enhanced room temperature ferromagnetism. The modulation of bound magnetic polarons via Mn and N codoping corroborates the correlation between the ferromagnetism and hole carriers, which is also verified by first-principles density functional theory calculations. Our study suggests that the electronic band alteration as a result of codoping engineering plays a critical role in stabilizing the long-range magnetic orderings.

36 MATERIALS SCIENCE↗

Inherent room temperature ferromagnetism and dopant dependent Raman studies of PbSe, Pb{sub 1−x}Cu{sub x}Se, and Pb{sub 1−x}Ni{sub x}Se

Polycrystalline lead selenide (PbSe) doped with copper (Cu) and nickel (Ni) was prepared to understand its magnetic behaviour and Raman activity. The processing conditions, influence of dopants (magnetically active and non-active) and their respective compositions on the magnetic properties and Raman active mode were studied. A surprising/anomalous room temperature ferromagnetism (hysteresis loop) is noticed in bulk diamagnetic PbSe, which is found to be natural or inherent characteristic of material, and depends on the crystallite size, dopant, and developed strain due to dopant/defects. The magnetic susceptibility (−1.71 × 10{sup −4} emu/mol Oe) and saturated magnetic susceptibility (−2.74 × 10{sup −4} emu/mol Oe) are found to be higher than the earlier reported value (diamagnetic: −1.0 × 10{sup −4} emu/mol Oe) in bulk PbSe. With increase of Cu concentration (2% to 10%) in PbSe, the saturated magnetic susceptibility decreases from −1.22 × 10{sup −4} to −0.85 × 10{sup −4} emu/mol Oe. Whereas for Ni dopant, the saturated magnetic susceptibility increases to −2.96 × 10{sup −4} emu/mol Oe at 2% Ni doped PbSe. But it further decreases with dopant concentration. In these doped PbSe, the shifting of longitudinal (LO) phonon mode was also studied by the Raman spectroscopy. The shifting of LO mode is found to be dopant dependent, and the frequency shift of LO mode is associated with the induced strain that created by the dopants and vacancies. This asymmetry in LO phonon mode (peak shift and shape) may be due to the intraband electronic transition of dopants. The variation in magnetic susceptibility and Raman shifts are sensitive to crystallite size, nature of dopant, concentration of dopants, and induced strain due to dopants.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of the non-magnetic material in spin pumping and magnetization dynamics in NiFe and CoFeB multilayer systems

We present a study of the effective magnetization M{sub eff} and the effective damping parameter α{sub eff} by means of ferromagnetic resonance spectroscopy on the ferromagnetic (FM) materials Ni{sub 81}Fe{sub 19} (NiFe) and Co{sub 40}Fe{sub 40}B{sub 20} (CoFeB) in FM/Pt, FM/NM, and FM/NM/Pt systems with the non-magnetic (NM) materials Ru, Cr, Al, and MgO. Moreover, for NiFe layer systems, the influence of interface effects is studied by way of thickness dependent measurements of M{sub eff} and α{sub eff}. Additionally, spin pumping in NiFe/NM/Pt is investigated by means of inverse spin Hall effect (ISHE) measurements. We observe a large dependence of M{sub eff} and α{sub eff} of the NiFe films on the adjacent NM layer. While Cr and Al do not induce a large change in the magnetic properties, Ru, Pt, and MgO affect M{sub eff} and α{sub eff} in different degrees. In particular, NiFe/Ru and NiFe/Ru/Pt systems show a large perpendicular surface anisotropy and a significant enhancement of the damping. In contrast, the magnetic properties of CoFeB films do not have a large influence of the NM adjacent material and only CoFeB/Pt systems present an enhancement of α{sub eff}. However, this enhancement is much more pronounced in NiFe/Pt. By the introduction of the NM spacer material, this enhancement is reduced. Furthermore, a difference in symmetry between NiFe/NM/Pt and NiFe/NM systems in the output voltage signal from the ISHE measurements reveals the presence of spin pumping into the Pt layer in all-metallic NiFe/NM/Pt and NiFe/Pt systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reinforcement of double-exchange ferromagnetic coupling by Ru in La{sub 1.24}Sr{sub 1.76}Mn{sub 2-y}Ru{sub y}O{sub 7} manganite system

Highlights: • Effect of Mn-site doping by Ru has been studied in La{sub 1.24}Sr{sub 1.76}Mn{sub 2-y}Ru{sub y}O{sub 7}. • Electrical resistance, magnetoresistance and magnetic properties were measured. • Ru substitution enhances the ferromagnetism and metallicity. • Results were interpreted by the ferromagnetically coupled Ru with Mn ions in Mn–O–Ru network. - Abstract: The effect of Mn-site doping on magnetic and transport properties in the bilayer manganites La{sub 1.24}Sr{sub 1.76}Mn{sub 2-y}Ru{sub y}O{sub 7} (y = 0.0, 0.04, 0.08 and 0.15) has been studied. The undoped compound La{sub 1.24}Sr{sub 1.76}Mn{sub 2}O{sub 7} exhibits a ferromagnetic metal to paramagnetic insulator transition at T{sub C} = 130 K and the substitution of Ru shifts the transition temperatures to higher temperature values. The increased metal–insulator transition by Ru substitution, obtained from temperature dependence of resistivity measurements, indicates that the Ru substitution enhances the metallic state at low temperature regime and favours the Mn–Ru pairs in the Ru doped samples. Moreover, the activation energy values calculated from the temperature dependence of resistivity curves suggest that the Ru substitution weakens the formation of polarons. The increased magnetoresistance ratio from 108% to 136% by Ru substitution, measured at 5 K, points out that the Ru substitution also enhances the inter-grain tunneling magnetoresistance. Thus, the ferromagnetic order and metallic state in La{sub 1.24}Sr{sub 1.76}Mn{sub 2}O{sub 7} system have been enhanced by the presence of Ru in the Mn-site. These reinforcements of ferromagnetic metallic state and magnetoresistance have been interpreted by the ferromagnetically coupled high spin states of Ru with Mn ions in the Mn–O–Ru network.

36 MATERIALS SCIENCE↗

Magnetic Studies of Mutiferroic Bi{sub 1-x}La{sub x}FeO{sub 3} Ceramics Synthesized By Solution Combustion Technique

Bi{sub 1-x}La{sub x}FeO{sub 3} (x = 0.0, 0.05, 0.10, 0.15) ceramic samples were prepared by solution combustion technique. X-ray diffraction patterns confirmed the formation of perovskite structured Bi{sub 1-x}La{sub x}FeO{sub 3} phase. Saturation magnetization (M{sub s}) increases with increasing La concentration from x = 0.0 to x = 0.15. Weak ferromagnetism is observed at room temperature in all the doped and undoped BFO samples. Mossbauer spectroscopy confirmed the presence of single-phase material for the doped compositions. Improvement in magnetic behavior appears to arise from a combination of the propensity of the samples to form pure phase material, partial destruction of spin cycloids and increased canting of spins.

36 MATERIALS SCIENCE↗

Fabrication of ultrathin FePt(Cu) ordered alloy thin films directly on glass disks from Pt(Cu)/Fe bilayers

Addition of Cu into Fe/Pt bilayered structure causes high coercivity and large magnetic anisotropy in the perpendicular direction when the thickness of the bilayer is less than 6 nm. In the thickness range less than 4 nm, Pt/Fe bilayered films with Cu added annealed at 600 deg. C in hydrogen atmosphere exhibits larger coercivity than the bilayer without Cu added. Pure Pt/Fe bilayered film exhibits relatively small coercivity, less than 4 kOe, and no perpendicular magnetic anisotropy in this range. On the other hand, Pt(Cu)/Fe bilayered film exhibits large coercivity of 5 kOe and relatively higher perpendicular magnetic anisotropy in the thickness range more than 5 nm. Pt(Cu)/Fe bilayered film can be expected to be applied to thin magnetic recording layer below 4 nm or less.

36 MATERIALS SCIENCE↗

Anomalous exchange bias behavior in ion-beam bombarded NiCo/(Ni,Co)O bilayers

The structural and magnetic properties of NiCo/(Ni,Co)O bilayers were investigated. X-ray diffractometry results have shown that the top NiCo layer consisted of a fcc NiCo phase. The bilayer bottom was either a pure (Ni,Co)O or a composite [NiCo+(Ni,Co)O] phase, depending on the percent of O{sub 2}/Ar ratio used during deposition. A double-shifted hysteresis loop exhibiting components that were from positive or negative coupling was observed in the NiCo/(Ni,Co)O (8%O{sub 2}/Ar) bilayers. The microstructural changes, which result from a combination of deposition oxygen content and the ion-beam bombardment, will result in the unusual exchange bias behavior.

36 MATERIALS SCIENCE↗

Dual phase transformation and resultant magnetic properties in Fe{sub 3}Pt thin films

Fifty-nm-thick Fe{sub 75}Pt{sub 25} thin films have been made on glass substrates by rf magnetron sputtering at room temperature, and subsequently annealed at 300 -700 deg. C (T{sub a}) for 1 h. The as-deposited Fe{sub 3}Pt film exhibits high magnetization of 1530 emu/cm{sup 3} and a disordered bcc structure, confirmed by high-resolution synchrotron radiation x-ray diffractometry. First-phase transformation from the bcc to disorder fcc structure occurs for samples annealed at 300 deg. C. With increasing of T{sub a} up to 375 deg. C, the film displays a nearly disordered fcc phase with low magnetization of 1083 emu/cm{sup 3}. The fcc phase changes to ordered L1{sub 2} structure for samples with T{sub a} {>=} 400 deg. C. The highly ordered L1{sub 2} phase with magnetization of 1270 emu/cm{sup 3} and coercivity of 66 Oe was obtained in Fe{sub 3}Pt film at 700 deg. C-annealing.

36 MATERIALS SCIENCE↗

Magnetic anisotropy engineering: Single-crystalline Fe films on ion eroded ripple surfaces

We present a method to preselect the direction of an induced in-plane uniaxial magnetic anisotropy (UMA) in thin single-crystalline Fe films on MgO(001). Ion beam irradiation is used to modulate the MgO(001) surface with periodic ripples on the nanoscale. The ripple direction determines the orientation of the UMA, whereas the intrinsic cubic anisotropy of the Fe film is not affected. Thus, it is possible to superimpose an in-plane UMA with a precision of a few degrees - a level of control not reported so far that can be relevant for example in spintronics.

36 MATERIALS SCIENCE↗

Ferromagnetism in Fe-doped tetra-needle like ZnO whiskers

The Fe-doped tetra-needle like ZnO whiskers (T-ZnOw) were prepared with different loadings of Fe{sup 3+} by a solid solution process. The structures and magnetic properties of the samples were characterized by using X-ray diffraction (XRD) and superconducting quantum interference device (SQUID) magnetometer, respectively. The results indicate that Fe{sup 3+} ions are successfully doped into the crystal lattice of T-ZnOw matrix. The second phase of ZnFe{sub 2}O{sub 4} is formed by heavy doping of Fe{sup 3+} ions, and the solid solubility limit of Fe{sup 3+} in T-ZnOw crystal is about 0.7 mol%. The magnetic properties reveal that some of the Fe-doped T-ZnOw exhibits room-temperature ferromagnetic behaviors. The room-temperature ferromagnetism in the Fe-doped T-ZnOw system is ascribed to be originated from the change of the electronic states of ZnOw caused by irons doping.

36 MATERIALS SCIENCE↗

Room temperature ferromagnetism in Co-doped amorphous carbon composites from the spin polarized semiconductor band

This study provides conclusive evidence of room temperature ferromagnetism in Co-doped amorphous carbon (a-C) composites from the spin polarized semiconductor band. These composites are constructed from discontinuous [Co(3 nm)/a-C(d{sub c} nm)]{sub 5} multilayers with d{sub c} = 3 nm and d{sub c} = 6 nm. Only remnant circular dichroism (CD) was observed from the d{sub c} = 3 nm sample but not when d{sub c} = 6 nm. In addition, the remnant CD peaks at 5.5 eV, which is comparable with the absorption peak associated with the C σ-σ* gap transition. We suggest that the possible mechanism for this coupling can be considered as a magnetic proximity effect in which a ferromagnetic moment in the C medium is induced by Co/C interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗