Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Land Use and Mapping

From the standpoint of technology, the most encouraging thing about ERTS has been the level of land-use identification. Land-use detail has exceeded the expectations of the Interagency Steering Committee and the requirements of land-use classification proposed by the Department of Interior. Whereas in the latter instance it was anticipated that only nine classes of land use would probably be identifiable, in fact some 14 to 18 classes have been identified. The success in the level of land-use identification results primarily from the various attributes of the ERTS system. These include the ability to provide repetitive coverage, and in particular seasonal coverage; the ability to image in four bands of the electromagnetic spectrum (green, red, and two near-infrared), which allows for manipulation of various combinations of bands; and the provision by the ERTS system of computer-compatible tapes for machine processing of data. Furthermore, the resolution of ERTS imagery has been better than expected. Although there is some question as to its exact resolving power, it is safe to say objects as small as 100 meters (300 feet) in diameter have been identified. Linear features as narrow as 16 meters (50 feet) can be detected (Figure 1).

Lindgren, D. T.↗

Analysis of a two-dimensional type 6 shock-interference pattern using a perfect-gas code and a real-gas code

Numerical codes were developed to calculate the two dimensional flow field which results when supersonic flow encounters double wedge configurations whose angles are such that a type 4 pattern occurs. The flow field model included the shock interaction phenomena for a delta wing orbiter. Two numerical codes were developed, one which used the perfect gas relations and a second which incorporated a Mollier table to define equilibrium air properties. The two codes were used to generate theoretical surface pressure and heat transfer distributions for velocities from 3,821 feet per second to an entry condition of 25,000 feet per second.

Bertin, J. J.↗

Aircraft water vapor measurements utilizing an aluminum oxide hygrometer

A hygrometer for water vapor measurements from an aircraft has been developed. An aluminum oxide hygrometer mounted in an aircraft Rosemount air temperature scoop was flown on NASA and USAF aircraft. Water vapor measurements were conducted up to 40,000 feet with penetration into the stratosphere. Good agreement was obtained with simultaneously flown remote sounders of water vapor. During transcontinental flights the hygrometer demonstrated adequate response to measure the natural variability of water vapor near the tropopause. Rapid response was demonstrated in pursuit of the jet wake of an F-104 at 35,000 feet.

Hilsenrath, E.↗

Space Shuttle External Tank.

During the quarter hour of its operational life, the External Tank must provide the propellants and propellant conditioning for the Orbiter Main Engines, provide the structural support for the two Solid Rocket Boosters, withstand the natural and induced environments, and effect a safe disposal. The External Tank is twice the size of the S-II Stage used in the Saturn V Booster for the Apollo and Skylab Spacecrafts. The External Tank is 182 feet long, 27 feet in diameter, and carries 1,700,000 pounds of liquid oxygen and liquid hydrogen propellants. The Shuttle System configuration and the interaction of the system elements pose an intricate system sensitivity which must be analyzed to establish the performance and sizing requirements for the External Tank.

Zoller, L. K.↗

HFL-10 lifting body flight control system characteristics and operational experience

A flight evaluation was made of the mechanical hydraulic flight control system and the electrohydraulic stability augmentation system installed in the HL-10 lifting body research vehicle. Flight tests performed in the speed range from landing to a Mach number of 1.86 and the altitude range from 697 meters (2300 feet) to 27,550 meters (90,300 feet) were supplemented by ground tests to identify and correct structural resonance and limit-cycle problems. Severe limit-cycle and control sensitivity problems were encountered during the first flight. Stability augmentation system structural resonance electronic filters were modified to correct the limit-cycle problem. Several changes were made to control stick gearing to solve the control sensitivity problem. Satisfactory controllability was achieved by using a nonlinear system. A limit-cycle problem due to hydraulic fluid contamination was encountered during the first powered flight, but the problem did not recur after preflight operations were improved.

Painter, W. D.↗

Impact resistance of spar-shell composite fan blades

Composite spar-shell fan blades for a 1.83 meter (6 feet) diameter fan stage were fabricated and tested in a whirling arm facility to evaluate foreign object damage (FOD) resistance. The blades were made by adhesively bonding boron-epoxy shells on titanium spars and then adhesively bonding an Inconel 625 sheath on the leading edge. The rotating blades were individually tested at a tip speed of 800 feet per second. Impacting media used were gravel, rivets, bolt, nut, ice balls, simulated birds, and a real bird. Incidence angles were typical of those which might be experienced by STOL aircraft. The tests showed that blades of the design tested in this program have satisfactory impact resistance to small objects such as gravel, rivets, nuts, bolts, and two inch diameter ice balls. The blades suffered nominal damage when impacted with one-pound birds (9 to 10 ounce slice size). However, the shell was removed from the spar for a larger slice size.

Graff, J.↗

Atlas F entry aerothermic study

The feasibility of obtaining heat transfer data on an expended Atlas F booster launch vehicle was investigated in the altitude range of 300,000 to 200,000 feet during entry conditions, with a velocity in the range of 20,000 to 25,000 feet per second, and through a range of vehicle attitudes of plus or minus 90 degrees. These data are desired for correlation with turbulent heat transfer and boundary layer transition data obtained from wind tunnel test facilities. The data would also be valuable in assessing rarified gas and surface catalicity effects in a real gas environment.

Source record↗

Flight investigation of approach and flare from simulated breakout altitude of a subsonic jet transport and comparison with analytical models

Satisfactory and optimum flare windows are defined from pilot ratings and comments. Maximum flare normal accelerations, touchdown rates of sink, and total landing maneuver time increments are summarized as a function of approach airspeed margin (with respect to reference airspeed) and flare initiation altitude. The effects of two thrust management techniques are investigated. Comparisons are made with predictions from three analytical models and the results of a simulator study. The approach speed margin was found to have a greater influence on the flare initiation altitude than the absolute airspeed. The optimum airspeed was between the reference airspeed and the reference airspeed plus 10 knots. The optimum flare initiation altitude range for unrestricted landings was from 11 meters to 20 meters (36 feet to 66 feet), and the landing time in the optimum window was 8 seconds. The duration of the landing maneuver increased with increasing flare initiation altitude and with increasing speed margins on the approach.

Matheny, N. W.↗

Narcosis studies and oxygen poisoning of mice

The research for a mechanism by which narcotic gases alter metabolism is reported. Possible sites of action by narcotic and anesthetic gases in isolated electron transport particles were explored. Using the relative activities of the NADH-oxygen, NADH-ferricyanide, succinate-cytochrome C and succinate-NAD oxidoreductase systems as parameters, the relative potency of volatile anesthetics were tested. Testing the relative ability of human subjects to contract and repay an oxygen debt while in the narcotic versus alert state, it was found that narcosis induced by 33% nitrous oxide increased the size of the oxygen debt contracted and the amount of oxygen required to repay it during recovery. Mice acclimatized to sea level (760 mm Hg), 5000 feet (632 mm Hg) or 15,000 feet 437 mm Hg) for from one to eight weeks were found to be more susceptible to convulsion and death as a function of altitude acclimatization when tested in hyperoxic environments. There were no reasonable explanations for the connection between hypoxia and oxygen poisoning but several practical implications for persons living at altitude are discussed.

Source record↗

Civil helicopter noise assessment study Boeing-Vertol model 347

A study was conducted to forecast the noise restrictions which may be imposed on civil transport helicopters in the 1975-1985 time period. Certification and community acceptance criteria were predicted. A 50 passenger tandem rotor helicopter based on the Boeing-Vertol Model 347 was studied to determine the noise reductions required, and the means of achieving them. Some of the important study recommendations are: (1) certification limits should be equivalent to 95 EPNdb at data points located at 500 feet to each side of the touchdown/takeoff point, and 1000 feet from this point directly under the approach and departure flight path. (2) community acceptance should be measured as Equivalent Noise Level (Leq), based on dBA, with separate limits for day and night operations, and (3) in order to comply with the above guidelines, the Model 347 helicopter will require studies and tests leading to several modifications.

Hinterkeuser, E. G.↗

Remote profiling of lake ice thickness using a short pulse radar system aboard a C-47 aircraft

Design and operation of short pulse radar systems for use in ice thickness measurement are described. Two ice profiling systems were tested, an S system which used either random noise or continous wave modulation at 2.8 GHz and a less powerful C band system which operated at 6.0 GHz and did not have random noise modulation. Flight altitudes of 4,000 feet were used, but the S band system was usable at 7,000 feet allowing flights in poor weather conditions. A minimum ice thickness of four inches is required for measurement, while the thickest ice measured was 36 inches. System accuracy is plus or minus one inch.

Cooper, D. W.↗

Lidar measurements of the variability of stratospheric particulates

Laser radar observations were made to provide information on the distribution of particulate material in the stratosphere between 33,000 feet and 98,000 feet. The observations are part of a program to assess the impact of climatic changes that may result from perturbation of the upper atmosphere by a world high-altitude aircraft fleet. Results are presented as vertical profiles of the scattering ratio and the aerosol backscattering ratio.

Russell, P. B.↗

Preliminary design of a 100 kW turbine generator

The National Science Foundation and the Lewis Research Center have engaged jointly in a Wind Energy Program which includes the design and erection of a 100 kW wind turbine generator. The machine consists primarily of a rotor turbine, transmission, shaft, alternator, and tower. The rotor, measuring 125 feet in diameter and consisting of two variable pitch blades operates at 40 rpm and generates 100 kW of electrical power at 18 mph wind velocity. The entire assembly is placed on top of a tower 100 feet above ground level.

Puthoff, R. L.↗

Thermal design and performance of the Viking balloon-launched decelerator test vehicles

The thermal design and performance of the test vehicles used for the flight-qualification of the Viking parachute system are described. The desired range of test conditions was provided by a subsonic drop from a balloon altitude of 90,000 feet, and rocket-powered transonic and supersonic flights initiated at balloon altitudes of 120,000 feet. Unusual aspects of the thermal design approach included the application of techniques developed in support of planetary programs to the thermal analysis of balloon payloads and the use of ground firing data to establish realistic upper bounds for radiant plume heating during flight. The adequacy of thermal design is verified by flight data.

Buna, T.↗

Development and fabrication of S-band chip varactor parametric amplifier

A noncryogenic, S-band parametric amplifier operating in the 2.2 to 2.3 GHz band and having an average input noise temperature of less than 30 K was built and tested. The parametric amplifier module occupies a volume of less than 1-1/4 cubic feet and weighs less than 60 pounds. The module is designed for use in various NASA ground stations to replace larger, more complex cryogenic units which require considerably more maintenance because of the cryogenic refrigeration system employed. The amplifier can be located up to 15 feet from the power supply unit. Optimum performance was achieved through the use of high-quality unpackaged (chip) varactors in the amplifier design.

Kramer, E.↗

The Marysville, Montana Geothermal Project

Drilling the first geothermal well in Montana presented many challenges, not only in securing materials and planning strategies for drilling the wildcat well but also in addressing the environmental, legal, and institutional issues raised by the request for permission to explore a resource which lacked legal definition. The Marysville Geothermal Project was to investigate a dry hot rock heat anomaly. The well was drilled to a total depth of 6790 feet and many fractured water bearing zones were encountered below 1800 feet.

Mcspadden, W. R.↗

Baseline measurement of the noise generated by a short-to-medium range jet transport flying standard ILS approaches and level flyovers

The results of baseline noise flight tests are presented. Data are given for a point 1.85 kilometers (1.0 nautical mile) from the runway threshold, and experimental results of level flyover noise at altitudes of 122 meters (400 feet) and 610 meters (2,000 feet) are also shown for several different power levels. The experimental data are compared with data from other sources and reasonable agreement is noted. A description of the test technique, instrumentation, and data analysis methods is included.

Hastings, E. C., Jr.↗

The 100 kW experimental wind turbine generator project

The Energy Research and Development Administration and the NASA Lewis Research Center engaged jointly in a Wind Energy Program which included the design and erection of a 100 kW wind turbine generator. This test machine consists of a rotor turbine, transmission, shaft, alternator, and tower. The rotor, measuring 125 feet in diameter and consisting of two variable pitch blades, operates at 40 rpm and generates 100 kW of electrical power at a wind velocity of 18 mph. The entire assembly is placed on top of a tower 100 feet above ground level. The machine was scheduled to be ready for operation in August, 1975.

Puthoff, R. L.↗