Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EROSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Application of ERTS-1 imagery to detecting and mapping modern erosion features, and to monitoring erosional changes, in southern Arizona

The author has identified the following significant results. ERTS-1 multispectral images have been used, without additional data, to prepare three maps at 1:1 million scale of the 18,000 sq. mi. project area: (1) modern (post-1890 A. D.) arroyos and channels; (2) types of stream channels; and (3) potential erodibility of soils; surficial deposits, and bedrock. Also completed was the collection and compilation of ground truth geologic, soil, and hydrologic data. Field studies to obtain ground control for the photointerpretive mapping include: (1) measurements, at many sites, of the depth, width, and channel characteristics of arroyos and gullies, and cross profiles of stream channels, flood plains, and Holocene terraces; and (2) stratigraphic measurements of the Holocene alluvial deposits. Significant conclusions from these extensive stratigraphic studies are: Slow deposition of sediment was the dominant process on stream lowlands throughout the project area for at least 2000 years prior to 1890 A.D. The deposition was broken by only two relatively brief and minor erosional episodes of regional importance, when channels no more than a third of the depth of modern channels were cut. The modern erosion has produced within about 80 years substantially more and larger arroyos than any erosion episode during the last 2000 years, and the end is not in sight.

Morrison, R. B.↗

Wear: Corrosion and erosion

The various forms of corrosion are discussed and the role of localized electrochemical reactions in the wear of sliding surfaces are considered. It is stated that there is evidence that fretting corrosion, stress corrosion cracking, corrosion fatigue, and erosion corrosion have as a common basis the localized electrochemical reactions caused by a combination of the induced homogeneity of the surfaces and the corrosive environment. Several processes leading to erosive wear are discussed.

Rowe, C. N.↗

Progress and problems in erosion prediction

Methods for predicting erosion resulting from repeated localized impulsive loadings, such a impacts from droplets or in cavitation flow from microjets and bubbles, are examined. The parameters which determine the adequacy of a component to resist the loads put upon it are identified. The development of erosion rate models is discussed. The expected accuracy of the prediction and the sources of error are analyzed.

Heymann, F. J.↗

Rain droplet erosion mechanisms in transparent plastic materials

Tests were conducted to determine the damaging effects of rain erosion on optically transparent materials. The rotating arm test equipment used for the tests is described. Typical transparent materials such as those found in windshields, infrared windows, lasers, and television systems were tested. Nominal velocities of 400, 500, and 600 miles per hour and rainfall conditions of one inch per hour simulated rainfall were used in the tests. It was determined that an 80 percent reduction in laser transmittance can occur in plastics submitted to rain erosion. Significant results of the environmental tests are explained.

Schmitt, G. F., Jr.↗

Sputter erosion and deposition in the discharge chamber of a small mercury ion thruster

A 5-cm diameter mercury ion thruster similar to one tested for 9715 hours was operated approximately 400 hrs each at discharge voltages of 36.6, 39.6, and 42.6 V, with corresponding discharge propellant utilizations of 58, 68, and 70 percent. The observed sputter erosion rates of the internal thruster parts and the anode weight gain rate all rose rapidly with discharge voltage and were roughly in the ratio of 1:3:5 for the three voltages. The combined weight loss of the internal thruster parts nearly balanced the anode weight gain. Hg+2 ions apparently caused most of the observed erosion.

Power, J. L.↗

Estimates of saltation threshold and erosion rates on Mars

The Mariner 9 photographs of the Martian surface include many which show crater-associated streaks caused by atmospheric winds. Due to the low density atmosphere of Mars, the wind speeds necessary to move surface particles and thus cause the streaks are apparently very high. The atmospheric-boundary-layer wind tunnel has been used to determine threshold speeds for particles of varying density and diameter and the results for small particles have been extrapolated to estimate somewhat lower threshold speeds on Mars than previous estimates. A series of streak modeling tests is used to derive an erosion-rate correlation function, which is in turn used to estimate erosion rates to the lee of some of the craters on Mars which exhibited time-dependent streak behavior during the mission.

Iversen, J. D.↗

Erosion and the rocks of Venus

Photographs of the surface of Venus returned by the Venera 9 and 10 spacecraft have revealed the presence of smooth and angular rockline forms. Two mechanisms previously suggested (Sagan, 1975) for erosion of crater ramparts on the surface of Venus might also explain the erosion of rocks. Chemical weathering by the hydrochloric, hydrofluoric, and sulfuric acids present in the atmosphere of Venus may have been sufficient to erode angular projections of silicous rocks. Alternatively, the contours of rocks containing such low-melting materials as NaOH, KOH, HgS and KNO2 may have softened as the result of exposure to the high surface temperatures of the planet.

Sagan, C.↗

Theoretical prediction of erosive burning characteristics of solid rocket propellant based on burning rate dependence of pressure and initial temperature and its energetic characteristics

New theoretical method for prediction of erosive burning characteristics of solid propellant, using known ballistic and thermodynamic data only, is presented. Method is based on modified Lenoir-Robillard formula, and is applicable for composite and double base propellants, with or without negative erosion effect. Method is confirmed using experimental data of numerous authors.

Jojic, B.↗

Simulation model of erosion and deposition on a barchan dune

Erosion and deposition over a barchan dune near the Salton Sea, California, are modeled by bookkeeping the quantity of sand in saltation following streamlines of transport. Field observations of near surface wind velocity and direction plus supplemental measurements of the velocity distribution over a scale model of the dune are combined as input to Bagnold type sand transport formulas corrected for slope effects. A unidirectional wind is assumed. The resulting patterns of erosion and deposition compare closely with those observed in the field and those predicted by the assumption of equilibrium (downwind translation of the dune without change in size or geometry). Discrepancies between the simulated results and the observed or predicted erosional patterns appear to be largely due to natural fluctuations in the wind direction. The shape of barchan dunes is a function of grain size, velocity, degree of saturation of the oncoming flow, and the variability in the direction of the oncoming wind. The size of the barchans may be controlled by natural atmospheric scales, by the age of the dunes, or by the upwind roughness. The upwind roughness can be controlled by fixed elements or by sand in the saltation. In the latter case, dune scale is determined by grain size and wind velocity.

Howard, A. D.↗

Thermal shock and erosion resistant tantalum carbide ceramic material

Ceramic tantalum carbide artifacts with high thermal shock and mechanical erosion resistance are provided by incorporating tungsten-rhenium and carbon particles in a tantalum carbide matrix. The mix is sintered by hot pressing to form the ceramic article which has a high fracture strength relative to its elastic modulus and thus has an improved thermal shock and mechanical erosion resistance. The tantalum carbide is preferable less than minus 100 mesh, the carbon particles are preferable less than minus 100 mesh, and the tungsten-rhenium particles are preferable elongate, having a length to thickness ratio of at least 2/1. Tungsten-rhenium wire pieces are suitable as well as graphite particles.

Honeycutt, L., III↗

Abrasion of windblown particles on Mars - Erosion of quartz and basaltic sand under simulated Martian conditions

The results of a series of laboratory experiments initiated to simulate Martian eolian erosion are presented. Experiments were conducted under Martian atmospheric pressure and compared to natural eolian sand produced on earth. It is reported that the less dense atmosphere on Mars resulted in more energetic eolian erosion manifested by an slightly higher rate of grain rounding and surface textures that included semicircular depressions termed 'popouts'. It is suggested that physical and chemical weathering may proceed more rapidly on Mars than on earth, given a sufficient supply of water vapor. In addition, clay mineral formations should be facilitated by the presence of large amounts of disrupted material. Finally, it is noted that the disrupted material could increase the ability of the soil to act as a reservoir for water thereby provisionally explaining the large amount of bound water on the surface soil material over much of Mars.

Krinsley, D.↗

Airphoto analysis of erosion control practices

The Universal Soil Loss Equation (USLE) is a widely accepted tool for erosion prediction and conservation planning. In this study, airphoto analysis of color and color infrared 70 mm photography at a scale of 1:60,000 was used to determine the erosion control practice factor in the USLE. Information about contour tillage, contour strip cropping, and grass waterways was obtained from aerial photography for Pheasant Branch Creek watershed in Dane County, Wisconsin.

Morgan, K. M.↗

Erosion of composite materials

A model for describing the response of uncoated and coated fiber reinforced composites subjected to repeated impingements of liquid (rain) droplets is presented. The model is based on the concept that fatigue is the dominant factor in the erosion process. Algebraic expressions are provided which give the incubation period, the rate of mass loss past the incubation period, and the total mass loss of the material during rain impact. The influence of material properties on erosion damage and the protection offered by different coatings are discussed and the use of the model in the design in the design of structures and components is illustrated.

Springer, G. S.↗

Remote sensing data applied to the evaluation of soil erosion caused by land-use. Ribeirao Anhumas Basin Area: A case study

Formerly covered by a tropical forest, the study area was deforested in the early 40's for coffee plantation and cattle raising, which caused intense gully erosion problems. To develop a method to analyze the relationship between land use and soil erosion, visual interpretations of aerial photographs (scale 1:25.000), MSS-LANDSAT imagery (scale 1:250,000), as well as automatic interpretation of computer compatible tapes by IMAGE-100 system were carried out. From visual interpretation the following data were obtained: land use and cover tapes, slope classes, ravine frequency, and a texture sketch map. During field work, soil samples were collected for texture and X-ray analysis. The texture sketch map indicate that the areas with higher slope angles have a higher susceptibilty to the development of gullies. Also, the over carriage of pastureland, together with very friable lithologies (mainly sandstone) occuring in that area, seem to be the main factors influencing the catastrophic extension of ravines in the study site.

Dejesusparada, N.↗

Surface erosion caused on Mars from Viking descent engine plume

During the Martian landings the descent engine plumes on Viking Lander 1 (VL-1) and Viking Lander 2 (VL-2) eroded the Martian surface materials. This had been anticipated and investigated both analytically and experimentally during the design phase of the Viking spacecraft. This paper presents data on erosion obtained during the tests of the Viking descent engine and the evidence for erosion by the descent engines of VL-1 and VL-2 on Mars. From these and other results, it is concluded that there are four distinct surface materials on Mars: (1) drift materials, (2) crusty to cloddy material, (3) blocky material, and (4) rock.

Hutton, R. E.↗

Fundamental studies of the solid-particle erosion of silicon

The predictions of the theories of solid-particle erosion of brittle materials are compared to experimental results of studies in which angular Al2O3 particles with mean diameters D of 23 to 270 microns are used to erode (111) surfaces of silicon single crystals at impact angles alpha from 20 to 90 deg and velocities v from 30 to 150 m/s. The description of the steady state erosion rate by a power law, delta W varies directly as (v sin alpha)(n)D(m) must be modified to include threshold and plasticity effects. Furthermore the velocity exponent n depends on D. Results using abrasives of different sizes mixed together can be explained using a logarithmic-normal distribution. The results of transient experiments can be used to explain the synergistic effects which are observed using a biomodal distribution of abrasives.

Routbort, J. L.↗

A study of the nature of solid particle impact and shape on the erosion morphology of ductile metals

Impulsive versus steady jet impingement of spherical glass bead particles on metal surfaces was studied using a gas gun facility and a commercial sand blasting apparatus. Crushed glass particles were also used in the sand blasting apparatus as well as glass beads. Comparisons of the different types of erosion patterns were made. Scanning electron microscopy, surface profilometry and energy dispersive X-ray spectroscopy analysis were used to characterize erosion patterns. The nature of the wear can be divided into cutting and deformation, each with its own characteristic features. Surface chemistry analysis indicates the possibility of complex chemical and/or mechanical interactions between erodants and target materials.

Rao, P. V.↗

Erosion of frozen sulfur dioxide by ion bombardment - Applications to Io

The erosion of frozen SO2 due to bombardment by both light and heavy ions (He and F) was measured for bombarding energies of 0.08 to 1.3 MeV/amu. The number of SO2 molecules ejected from the target per incident ion (i.e., the sputtering yield) was 50 for 1.5 MeV He ions and 7300 for 6 MeV F ions. Ion bombardment followed by heating produced an oxygen/sulfur residue which was much more stable against subsequent ion bombardment than the initial frozen SO2. The erosion rate of SO2 frost on Jupiter's moon Io depends strongly on the elemental composition and energy spectra of the magnetospheric ion flux which bombards the surface. The combined effects of ion bombardment and heating which produced residues on the target substrates may also occur on Io from magnetospheric ion bombardment and heating by volcanism. The experimental results compare favorably with a new model of the sputtering process which considers the energy loss of the incident ion to electronic excitation in the target.

Melcher, C. L.↗