Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Assessment of Low-Altitude Atmospheric Turbulence Models for Aircraft Aeroelasticity

We investigate the dynamic aeroelastic response of large but slow aircraft in low-altitude atmospheric turbulence. To this end, three turbulence models of increasing fidelity, namely, the one-dimensional von Kármán model, the two-dimensional Kaimal model and full three-dimensional wind fields extracted from large-eddy simulations (LES) are used to simulate ambient turbulence near the ground. Load calculations and flight trajectory predictions are conducted for a representative high-aspect-ratio wing aircraft, using a fully coupled nonlinear flight dynamics/aeroelastic model, when it operates in background atmospheric turbulence generated by the aforementioned models. Comparison of load envelopes and spectral content, on vehicles of varying flexibility, shows strong dependency between the selected turbulence model and aircraft aeroelastic response (e.g. 58% difference in the predicted magnitude of the wing root bending moment between LES and von Kármán models). This is mainly due to the presence of large flow structures at low altitudes that have comparable dimensions to the vehicle, and which despite the relatively small wind speeds within the Earth boundary layer, result in overall high load events for slow-moving vehicles. Results show that one-dimensional models that do not capture those effects provide fairly non-conservative load estimates and are unsuitable for very flexible airframe design.

atmospheric turbulence↗
DOE OSTI2026

Vicennial metagenomic time series unveils evolutionary dynamics of giant viruses in a freshwater ecosystem

Giant viruses play crucial ecological roles in aquatic ecosystems, yet their evolutionary dynamics in response to environmental changes, particularly in freshwater environments, are not well understood. We analyzed a 20-year time series (2000-2019) of 471 co-assembled metagenomes from Lake Mendota (USA) to reconstruct 1512 giant virus metagenome-assembled genomes, providing insights into viral genome evolution. Viruses in the order Imitervirales dominate the virome, remaining consistent across seasons and years. Our findings reveal gene duplication (23% of genes) and horizontal gene transfer (29% of genes) as key drivers of genomic innovation. A co-occurrence network analysis indicates increased virus-host interactions following the introduction of an invasive predatory zooplankton in 2009, highlighting potential hosts in Bigyra, Perkinsea, and Euglenozoa. While single nucleotide polymorphism analysis shows predominantly purifying selection in viral genes, there is a significant increase in positively selected genes post-invasion, particularly those related to infection. Comparative evolutionary analyses reveal that giant viruses exhibit genome-wide substitution rates similar to co-occurring bacteria but significantly slower than smaller dsDNA phages, suggesting both stability and adaptability. Our study demonstrates that freshwater giant viruses employ various evolutionary strategies to respond to environmental change. These results underscore their significant yet often underappreciated role in freshwater ecosystem dynamics.

Vasquez, Yumary M↗
DOE OSTI2021

Zika virus dynamics: Effects of inoculum dose, the innate immune response and viral interference

Experimental Zika virus infection in non-human primates results in acute viral load dynamics that can be well-described by mathematical models. The inoculum dose that would be received in a natural infection setting is likely lower than the experimental infections and how this difference affects the viral dynamics and immune response is unclear. Here we study a dataset of experimental infection of non-human primates with a range of doses of Zika virus. We develop new models of infection incorporating both an innate immune response and viral interference with that response. We find that such a model explains the data better than models with no interaction between virus and the immune response. We also find that larger inoculum doses lead to faster dynamics of infection, but approximately the same total amount of viral production.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Arbitrary Achromatic Polarization Control with Reconfigurable Metasurface Systems

Abstract Dynamic control over the polarization state of light is foundational for many scientific and technological applications, yet it remains a challenge to dynamically tailor responses with arbitrary polarization bases over a broad bandwidth. Broadband metasurface systems that utilize microscale displacements between two metasurfaces to enable reconfigurable polarization responses within a predefined polarization basis are reported. The metasurface pairs form an interferometer, and the lateral displacements produce detour phase shifts within the interferometer beam paths that mediate polarization state tuning. It is shown how the metasurface systems can be designed using freeform topology optimization to enable tailorable elliptical birefringence responses over a large bandwidth and how cascaded metasurface systems can enable the mapping of input and output polarization states between any two points on the Poincare sphere. It is anticipated that these concepts will have utility in imaging, display, communications, and metrology applications in classical and quantum optical domains.

Wang, Evan W.↗
DOE OSTI2022

High-Pressure Characterization of Two Stereoisomers of Tetranitroester Cyclobutane

The high-pressure behavior of two stereoisomeric cyclobutane nitric ester materials were studied at room temperature to near 25 GPa via Raman spectroscopy and powder X-ray diffraction. The materials investigated included [cis-trans-cis]- and [all-cis]-tetranitrate ester cyclobutanes. Over the course of these studies no evidence of polymorphism was observed, highlighting the stability of the ambient pressure crystal structures of the cyclobutanes to conditions near the detonation pressure of the material. Differences were observed between the bulk moduli of the two stereoisomers, suggesting potential tunability in materials response under dynamic conditions through the use of isomeric materials. Finally, such findings suggest that these high-performance materials can serve as TNT replacement in novel melt-castable energetic formulations without the concern of uncontrolled polymorphism that might otherwise affect the performance and safety of a munition.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2022

Resolving the Martensitic Transformation in Q&P Steels In-Situ at Dynamic Strain Rates Using Synchrotron X-ray Diffraction

Herein the dynamic deformation response of two quenching and partitioning (Q&P) steels was investigated using a high strain rate tension pressure bar and in-situ synchrotron radiography and diffraction. This allowed for concurrent measurements of the martensitic transformation, the elastic strains/stresses on the martensite and ferrite, and the bulk mechanical behavior. The steel with the greater fraction of ferrite exhibited greater ductility and lower strength, suggesting that dislocation slip in ferrite enhanced the deformability. Meanwhile, the kinetics of the martensitic transformation appeared similar for both steels, although the steel with a greater ferrite fraction retained more austenite in the neck after fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High performance high-power textured Mn/Cu-doped PIN-PMN-PT ceramics

Piezoelectric ceramics with combinatory soft and hard characteristics are highly desired for high-power applications. However, it remains grand challenge to achieve simultaneous presence of hard (e.g. high coercive field, E c ; high mechanical quality factor, Q m ) and soft (e.g. high piezoelectric constant, d; high electromechanical coupling factor, k) piezoelectric properties in piezoelectric ceramics since the mechanism controlling the hard behavior (pinned domain walls) will significantly reduce the soft behavior. Here, we address this grand challenge and demonstrate <001> textured MnO 2 and CuO co-doped Pb(In 1/2 Nb 1/2 )O 3- Pb(Mg 1/3 Nb 2/3 )O 3- PbTiO 3 (PIN-PMN-PT) ceramics exhibiting ultrahigh combined soft and hard piezoelectric properties (d 33 = 713 pC N –1 , k 31 = 0.52, Q m ≈950, E c = 9.6 kV cm –1 , tan δ = 0.45%). The outstanding electromechanical properties are explained by considering composition/phase selection, crystallographic anisotropy and defect engineering. Phase-field model in conjunction with high resolution electron microscopy and diffraction techniques is utilized to delineate the contributions arising from intrinsic piezoelectric response, domain dynamics, and local structural heterogeneity. Furthermore, these results will have significant impact in the development of high-power transducers and actuators.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dynamic aspects of graphene deformation and fracture from approximate density functional theory

Graphene is one of the most intriguing two-dimensional carbon materials. Its mechanical strength and failure are key concerns for materials engineering and applications. Despite the success of fracture mechanics, the mechanism of how pristine materials fail remains an elusive problem. While many theoretical studies based on molecular dynamics using empirical forcefields have tried to address this question, atomic-scale mechanics are not clearly understood. Especially, a widely employed bond-breaking approach based on the critical bond length has not been rigorously tested. Here, utilizing molecular dynamics simulations with density functional based tight binding, we investigate how the failure of the pristine material initiates. The Wiberg bond order (W BO ) to estimate the change of chemical bonds shows a transition from sp 2 (W BO ~ 1.33) to sp 3 (WBO < 1.0) during the deformation. However, it reveals that a single threshold value for either the WBO or bond length is insufficient to decide failure of pristine material without free edges or defects. Instead, collective behaviors of the local atomic group govern the fracture initiation of pristine graphene. Overall, our study provides dynamic mechanical responses based on quantum mechanics, which have not been captured by empirical forcefields, opening opportunities to design properties by precisely coupling the mechanics and quantum mechanics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Predicting extreme anisotropy and shape variations in impact testing of tantalum single crystals

We report recent Taylor cylinder impact tests carried out for Ta single crystals showed strong variations in dimensional changes for different crystallographic directions aligned with the cylindrical axis. In order to capture the effect of crystallography on the deformation characteristics and final shapes of the impacted cylinders, a single crystal material subroutine is adapted and embedded in the solid mechanics/dynamics Finite Element solver Abaqus to simulate the aforementioned single crystal Ta Taylor impact experiments. Details of the coupled model implementation, and insights on the role played by single crystal anisotropic flow on the deformation behavior across a broad range of strain rates and temperatures for different single crystal orientations are presented and discussed. We demonstrate the predictive capability of the adopted crystal plasticity model to capture the significant role played by crystal orientation-induced anisotropy, as well as strain hardening and adiabatic heating, on the dynamic deformation response of crystalline materials. This re-emphasizes the need of microstructure-aware models to improve the accuracy of simulations for high-consequence engineering design.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hydrogen station in situ back-to-back fueling data for design and modeling

Hydrogen technologies are rapidly spreading, with significant attention to the mobility sector requiring a robust and widespread fueling infrastructure. Hydrogen stations are indeed fundamental to transitioning from pilot projects towards large-scale implementation in many countries. Operating under extreme conditions, the new stations need more informed designs and equipment to meet the growing demand and their more frequent utilization. Via a set of experimental research activities and investigated scenarios carried out at the Cal State LA Hydrogen Research and Fueling Facility, here this paper shares a novel and comprehensive set of data collected over a period of one year on fueling events frequency and refueling process station behaviors. A performance evaluation of the station is presented under different load scenarios in severe conditions during "back-to-back fuelings", with monitoring of fundamental parameters for infrastructure sizing, including dynamic cooling response, pressure levels, thermodynamics, and the state of charge of the vehicle. The presented data analysis could surely contribute as closer-to-reality inputs for a variety of station performance modeling tools.

08 HYDROGEN↗
DOE OSTI2021

Development of the reactor core isolation cooling system model for the extended station black-out accident

In order to accurately predict the behavior of the Reactor Core Isolation Cooling System (RCIC) in the context of the FLEX strategies under the extended station black-out accident (SBO), we present a mechanistic model of the RCIC in this work. The control volume formulation of angular momentum conservation is employed to model the Terry turbine in the RCIC system. The two-phase nozzle flow model developed in the previous work is utilized to simulate the convergent-divergent nozzles in the Terry turbine. A nozzle flow table is generated to cover the operation range of the RCIC during beyond design basis accidents (BDBAs). The mechanistic RCIC turbine-pump model and the nozzle flow table are incorporated in a TRACE BWR model. Simulations of short-term and long-term SBO transients are performed to demonstrate dynamic RCIC responses. A system analysis code with the proposed mechanistic model of the RCIC system will have a better prediction of system safety response during SBO accidents. With the addition of such more realistic models, the system code will be capable of providing expanded understanding of safety margin, which can help help to form the technical basis for the successful implementation of the FLEX and SAMG measures under Extended Loss of AC Power (ELAP) conditions for BWR or PWR reactor designs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A gravo-aeroelastically scaled wind turbine rotor at field-prototype scale with strict structural requirements

A new sub-scale field-prototype design solution is developed to realize the dynamics, structural response, and distributed loads (gravitational, aerodynamic, centrifugal) that are characteristic of a full-scale large, modern wind turbine rotor. Prior work in sub-scale wind turbine testing has focused on matching aerodynamic/aero-elastic characteristics of full-scale rotors at wind tunnel scale. However, large-scale rotor designs must expand beyond this limited set of scaling parameters for cost-effective prototyping and meet strict requirements for structural safety for field testing. Here, the challenge lies in producing a structural design meeting two competing objectives: novel scaling objectives that prescribe the sub-scale blade to have low mass and stiffness; and traditional structural safety objectives that drive the design to have higher stiffness and mass. A 20% gravo-aeroelastically scaled wind turbine blade is developed successfully that satisfies these competing objectives. First, it achieved close agreement for non-dimensional tip deflection and flap-wise blade frequency (both within 2.1%) with a blade mass distribution constrained to produce target gravitational and centrifugal loads. Second, the entire blade structure was optimized to ensure a safe, manufacturable solution meeting strict strength requirements for a testing site that can experience up to 45 m/s wind gusts. The prototype-scale blade was fabricated and successfully proof-load tested.

17 WIND ENERGY↗
DOE OSTI2025

Probing Hydrogen-Bond Anharmonicity in Cocrystals with Colossal Thermal Expansion

Organic cocrystals with sizable anisotropic thermal expansion (TE) are attractive building blocks for thermally responsive soft actuators. Such materials often display intermolecular H-bonding, whose thermal strength fluctuations are frequently overlooked if displacements and/or conformational changes are visible during TE. In this work, we employed variable-temperature single-crystal synchrotron diffraction to investigate the linear expansion coefficients of two organic cocrystals, 1 and 2, which exhibit colossal thermal expansivity exceeding 140 MK –1 . Despite such pronounced TE, solid-state 2 H and 13 C NMR experiments show no evidence of fast internal reorientations or large-amplitude molecular displacement during expansion. Although nondirectional π–π stacking dominates the colossal TE, our results indicate that hydrogen bonds play a non-negligible role in the anisotropic response. Molecular dynamics simulations reveal a temperature-dependent broadening of H-bond length distributions, which arises from the increased thermal sampling of an anharmonic potential energy surface. Our data support an expansion mechanism based on cooperativity in π-π interactions, accompanied by thermal softening and fluctuation-driven stretching of directional hydrogen bonds in these molecular solids. This mechanism underscores the significance of directional interactions in organic cocrystals, which is a key factor in the design of organic thermoresponsive crystalline materials.

Hernández-Morales, Ernesto A. [Univ. Nacional Auto↗
DOE OSTI2022

Investigating Carboxysome Morphology Dynamics with a Rotationally Invariant Variational Autoencoder

Carboxysomes are a class of bacterial microcompartments that form proteinaceous organelles within the cytoplasm of cyanobacteria and play a central role in photosynthetic metabolism by defining a cellular microenvironment permissive to CO2 fixation. Critical aspects of the assembly of the carboxysomes remain relatively unknown, especially with regard to the dynamics of this microcompartment. Progress in understanding carboxysome dynamics is impeded in part because analysis of the subtle changes in carboxysome morphology with microscopy remains a low-throughput and subjective process. Here we use deep learning techniques, specifically a Rotationally Invariant Variational Autoencoder (rVAE), to analyze fluorescence microscopy images of cyanobacteria bearing a carboxysome reporter and quantitatively evaluate how carboxysome shell remodelling impacts subtle trends in the morphology of the microcompartment over time. Toward this goal, we use a recently developed tool to control endogenous protein levels, including carboxysomal components, in the model cyanobacterium Synechococcous elongatus PCC 7942. By utilization of this system, proteins that compose the carboxysome can be tuned in real time as a method to examine carboxysome dynamics. We find that rVAEs are able to assist in the quantitative evaluation of changes in carboxysome numbers, shape, and size over time. Further, we propose that rVAEs may be a useful tool to accelerate the analysis of carboxysome assembly and dynamics in response to genetic or environmental perturbation and may be more generally useful to probe regulatory processes involving a broader array of bacterial microcompartments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Molecular Modes Elucidate the Nuclear Magnetic Resonance Relaxation of Viscous Fluids

The Bloembergen, Purcell, and Pound (BPP) theory of nuclear magnetic resonance (NMR) relaxation in fluids dating back to 1948 continues to be the linchpin in interpreting NMR relaxation data in applications ranging from characterizing fluids in porous media to medical imaging (MRI). The BPP theory is founded on assuming molecules are hard spheres with 1 H– 1 H dipole pairs reorienting randomly; assumptions that are severe in light of modern understanding of liquids. Nevertheless, it is intriguing to this day that the BPP theory was consistent with the original experimental data for glycerol, a hydrogen-bonding molecular fluid for which the hard-sphere-rigid-dipole assumption is inapplicable. To better understand this incongruity, atomistic molecular simulations are used to compute 1 H NMR T 1 relaxation dispersion (i.e., frequency dependence) in two contrasting cases: glycerol, and a (non hydrogen-bonding) viscosity standard. At high viscosities, simulations predict distinct functional forms of T 1 for glycerol compared to the viscosity standard, in agreement with modern measurements, yet both in contrast to BPP theory. The cause of these departures from BPP theory is elucidated, without assuming any relaxation models and without any free parameters, by decomposing the simulated T 1 response into dynamic molecular modes for both intramolecular and intermolecular interactions. The decomposition into dynamic molecular modes provides an alternative framework to understand the physics of NMR relaxation for viscous fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Polarity of Co-solvents Regulates the Charge Storage Mechanisms in Supercapacitors with Concentrated Electrolytes

Developing better energy storage devices depends on comprehending the underlying mechanisms involved in charge storage. With the continuous conception of new electrolytes, this task becomes progressively more urgent and complex. An example is the utilization of co-solvated concentrated solutions. While these show promising electrochemical responses, their dynamic properties (especially under confinement) and their relationships with performance are not fully understood. Here, we combined modified step potential electrochemical spectroscopy and quasielastic neutron scattering to investigate systems composed of activated mesoporous carbon (AMC) and concentrated solutions of lithium bis(trifluoromethanesulfonyl)imide in acetonitrile co-solvated with either toluene or acetone. Further, we report that acetone does not impair surface-controlled mechanisms, contrary to the case with toluene, which competes with charged species to populate the AMC’s pores without contributing to charge storage. In turn, toluene promotes a greater overall capacitance owing to Faradaic processes, which may be related to changes in the solvation structures under confinement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗