Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Differential model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Calculations of the effects of angular momentum on the early evolution of Jupiter

Early phases in the evolutionary development of a rotating cloud of gas and dust are investigated to determine whether physically reasonable initial conditions are likely to produce a planet-satellite system with the values of specific orbital angular momentum currently observed for Jupiter and its inner satellites. Spherically symmetric computations of Jupiter's evolutionary history are reviewed, and transport of angular momentum is considered along with evolutionary sequences of individual differentially rotating models with decreasing values of equatorial radius. The problem of accounting for the present specific orbital angular momenta of Jupiter and its regular satellites is examined qualitatively, and a range of possible angular-momentum distributions in an initially tidally unstable cloud is assessed. The results show that particular physically plausible angular-momentum distributions, which could either be established as initial conditions or be caused by angular-momentum transport, will lead to favorable situations for the formation of a central planet and a surrounding rotating cloud with specific angular momentum comparable to that of the regular satellites.

Bodenheimer, P.↗

Effect of chordwise forces and deformations and deformations due to steady lift on wing flutter

This investigation explores the effects of chordwise forces and deformations and steady-state deformation due to lift on the static and dynamic aeroelastic stability of a uniform cantilever wing. Results of this analysis are believed to have practical applications for high-performance sailplanes and certain RPV's. The airfoil cross section is assumed to be symmetric and camber bending is neglected. Motions in vertical bending, fore-and-aft bending, and torsion are considered. A differential equation model is developed, which included the nonlinear elastic bending-torsion coupling that accompanies even moderate deflections. A linearized expansion in small time-dependent deflections is made about a steady flight condition. The stability determinant of the linearized system then contains coefficients that depend on steady displacements. Loads derived from two-dimensional incompressible aerodynamic theory are used to obtain the majority of the results, but cases using three-dimensional subsonic compressible theory are also studied. The stability analysis is carried out in terms of the dynamically uncoupled natural modes of vibration of the uniform cantilever.

Boyd, W. N.↗

Finite Control in Underdamped Distributed Parameter Systems

Specifically, a class of distributed parameter systems is defined using Hilbert space methods based on a partial differential equation model of a structure. In this space a simple, easy to check definition of underdamping is constructed based on the well known single degree of freedom concept of critical damping. It is then shown that if a given distributed parameter system satisfies this definition, each mode of the modal expansion of the solution is in fact an underdamped function of time. It is noted that a distributed parameter system which is underdamped is also uniformly exponentially stable. By appealing to the work of Gibson, a finite dimensional model of the system will yield satisfactory control laws. Furthermore, it is shown that the assumption of the underdamping also allows straightforward computation of rough bounds on the magnitude of the unmodeled or residual modes for a modal truncation scheme. Hence, underdamped systems are precisely that class of distributed parameter systems which are not likely to have spillover problems and which will yield convergence of finite dimensional control laws to control laws which are optimal for the full distributed parameter model of the system.

Inman, D. J.↗

NGC 2110 - A Seyfert and X-ray elliptical galaxy with displaced kinematic and light centers

Kinematic and imaging observations of NGC 2110 are reported and it is found that the interstellar gas is orbiting with projected rotation axis parallel to the minor axis of the stellar light. The rotation curve is steep close to the center and flat farther out. However, the nucleus is displaced by about 220 pc from the apparent mass center of the galaxy. This last result is discussed in terms of models invoking differential obscuration of stars and gas, non-Keplerian motion of the gas, or a large mass of unseen material which dominates the rotation curve.

Wilson, A. S.↗

On compactness of admissible parameter sets: Convergence and stability in inverse problems for distributed parameter systems

A series of numerical examples is reported and several algorithms compared for estimation of coefficients in differential equation models. Unconstrained, constrained and Tikhonov regularization methods are tested for their behavior with regard to both convergence (of approximation methods for the states and parameters) and stability (continuity of the estimates with respect to perturbations in the data or observed states).

Banks, H. T.↗

Non-dynamic decimeter tracking of earth satellites using the Global Positioning System

A technique is described for employing the Global Positioning System (GPS) to determine the position of a low earth orbiter with decimeter accuracy without the need for user dynamic models. A differential observing strategy is used requiring a GPS receiver on the user vehicle and a network of six ground receivers. The technique uses the continuous record of position change obtained from GPS carrier phase to smooth position measurements made with pseudo-range. The result is a computationally efficient technique that can deliver decimeter accuracy down to the lowest altitude orbits.

Yunck, T. P.↗

Turbulent two-phase flow in annular seals

Steady, turbulent two-phase fluid flow in a rotating annular seal with no eccentricity is analyzed. The fluid is assumed to be a homogeneous mixture of liquid and vapor in thermodynamic equilibrum. Further, the flow is assumed to be adiabatic, but the effects due to heat generation by viscous dissipation are accounted for fully. Solution of the model governing differential equations is accomplished by use of a fourth-order Runge-Kutta numerical integration scheme. The calculation of mass leakage rates under choked and unchoked conditions are discussed and the phenomenon of all-liquid choked flow is explained. Several numerical examples are presented supposing cyrogenic oxygen as the sealed fluid.

Beatty, P. A.↗

Uranus satellites - Densities and composition

Homogeneous and core-differentiated silicate/ice models of the Uranian satellites Miranda, Ariel, Umbriel, Titania, and Oberon are examined in the light of imaging observations and mass and density determinations obtained during the Voyager 2 encounter with Uranus in January 1986. The data and model predictions are compared in extensive tables and graphs and discussed in detail. The mass fractions of silicates in Oberon and Titania are found to be between 0.42 and 0.65, about the same as the average for the satellites of Jupiter and Saturn but significantly higher than that for the smaller Saturnian satellites or that predicted by current solar-nebula models. It is suggested that the satellites formed by accretion of material from their primary planets' outer envelopes. The observed rock/ice fractions are attributed to solar-nebula CO and solid-organics abundances and to preferential dissolution of H2O in outer-envelope planetesimals.

Johnson, Torrence V.↗

Differential sampling for fast frequency acquisition via adaptive extended least squares algorithm

This paper presents a differential signal model along with appropriate sampling techinques for least squares estimation of the frequency and frequency derivatives and possibly the phase and amplitude of a sinusoid received in the presence of noise. The proposed algorithm is recursive in mesurements and thus the computational requirement increases only linearly with the number of measurements. The dimension of the state vector in the proposed algorithm does not depend upon the number of measurements and is quite small, typically around four. This is an advantage when compared to previous algorithms wherein the dimension of the state vector increases monotonically with the product of the frequency uncertainty and the observation period. Such a computational simplification may possibly result in some loss of optimality. However, by applying the sampling techniques of the paper such a possible loss in optimality can made small.

Kumar, Rajendra↗

Potential vorticity and layer thickness variations in the flow around Jupiter's Great Red Spot and White Oval BC

Using Voyager images, layer thickness variations in the flow around Jupiter's Great Red Spot (GRS) and White Oval BC were investigated by treating potential vorticity as a conserved tracer. Fluid trajectories around the GRS and the White Oval BC were calculated assuming the flow to be frictionless, adiabatic, hydrostatic, and steady in the reference frame of the vortex. The data obtained constitute a useful diagnostic which will help to differentiate between models of Jovian vortices. Implications of the observations were studied in the context of a one-layer quasi-geostrophic model in which a thin upper weather layer, which contains the vortex, is supported hydrostatically by a much deeper lower layer.

Dowling, Timothy E.↗

On damping mechanisms in beams

A partial differential equation model of a cantilevered beam with a tip mass at its free end is used to study damping in a composite. Four separate damping mechanisms consisting of air damping, strain rate damping, spatial hysteresis and time hysteresis are considered experimentally. Dynamic tests were performed to produce time histories. The time history data is then used along with an approximate model to form a sequence of least squares problems. The solution of the least squares problem yields the estimated damping coefficients. The resulting experimentally determined analytical model is compared with the time histories via numerical simulation of the dynamic response. The procedure suggested here is compared with a standard modal damping ratio model commonly used in experimental modal analysis.

Banks, H. T.↗

Differential Sampling For Fast Acquisition Of Frequency

Algorithm rapidly estimates frequency of sinusoidal signal corrupted by zero-mean, additive, white Gaussian noise. Incorporates differential mathematical model of signal, cyclic sampling of signal, and least-squares best-estimate criterion. Adapts to changing signal frequency. Amount of computation required to obtain estimate increases only linearly with number of successive measurements processed.

Kumar, Rajendra↗

Frequency analysis via the method of moment functionals

Several variants are presented of a linear-in-parameters least squares formulation for determining the transfer function of a stable linear system at specified frequencies given a finite set of Fourier series coefficients calculated from transient nonstationary input-output data. The basis of the technique is Shinbrot's classical method of moment functionals using complex Fourier based modulating functions to convert a differential equation model on a finite time interval into an algebraic equation which depends linearly on frequency-related parameters.

Pearson, A. E.↗

On damping mechanisms in beams

A partial differential equation model of a cantilevered beam with a tip mass at its free end is used to study damping in a composite. Four separate damping mechanisms consisting of air damping, strain rate damping, spatial hysteresis and time hysteresis are considered experimentally. Dynamic tests were performed to produce time histories. The time history data is then used along with an approximate model to form a sequence of least squares problems. The solution of the least squares problem yields the estimated damping coefficients. The resulting experimentally determined analytical model is compared with the time histories via numerical simulation of the dynamic response. The procedure suggested here is compared with a standard modal damping ratio model commonly used in experimental modal analysis.

Banks, H. T.↗

A model of the 8-25 micron point source infrared sky

A model is developed that permits the representation of the Galactic disk and bulge, the molecular ring, extragalactic sky, and other Galactic structures in terms of the IR point-source sky. Full characterization is achieved for up to 87 types of Galactic sources in terms of scale heights and absolute magnitudes, and the model is guided by a parallel Monte Carlo simulation of the Galaxy at 12 microns. The model predicts differential and cumulative IR source counts for all bandpasses in the IRAS ranges and can therefore be employed to predict the character of the point-source sky related to IR space observations.

Wainscoat, Richard J.↗

Frequency analysis via the method of moment functionals

Several variants are presented of a linear-in-parameters least squares formulation for determining the transfer function of a stable linear system at specified frequencies given a finite set of Fourier series coefficients calculated from transient nonstationary input-output data. The basis of the technique is Shinbrot's classical method of moment functionals using complex Fourier based modulating functions to convert a differential equation model on a finite time interval into an algebraic equation which depends linearly on frequency-related parameters.

Pearson, A. E.↗

Growing Three-Dimensional Cocultures Of Cells

Laboratory process provides environmental conditions favoring simultaneous growth of cocultures of mammalian cells of more than one type. Cultures become three-dimensional tissuelike assemblies serving as organoid models of differentiation of cells. Process used, for example, to study growth of human colon cancers, starting from mixtures of normal colonic fibroblasts and partially differentiated colon adenocarcinoma cells.

Wolf, David A.↗

Using EEG To Detect and Monitor Mental Fatigue

This project aims to develop EEG-based methods for detecting and monitoring mental fatigue. Mental fatigue poses a serious risk, even when performance is not apparently degraded. When such fatigue is associated with sustained performance of a single type of cognitive task it may be related to the metabolic energy required for sustained activation of cortical areas specialized for that task. The objective of this study was to adapt EEG to monitor cortical energy over a long period of performance of a cognitive task. Multielectrode event related potentials (ERPs) were collected every 15 minutes in nine subjects who performed a mental arithmetic task (algebraic sum of four randomly generated negative or positive digits). A new problem was presented on a computer screen 0.5 seconds after each response; some subjects endured for as long as three hours. ERPs were transformed to a quantitative measure of scalp electrical field energy. The average energy level at electrode P3 (near the left angular gyrus), 100-300 msec latency, was compared over the series of ERPs. For most subjects, scalp energy density at P3 gradually fell over the period of task performance and dramatically increased just before the subject was unable to continue the task. This neural response can be simulated for individual subjects using, a differential equation model in which it is assumed that the mental arithmetic task requires a commitment of metabolic energy that would otherwise be used for brain activities that are temporarily neglected. Their cumulative neglect eventually requires a reallocation of energy away from the mental arithmetic task.

Montgomery, Leslie↗