Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Cs-137 Body-burdens in Wild Pigs on the Department of Energy's Savannah River Site: Determination of an Appropriate Framework for Spatiotemporal Analysis of Hunter Dose Tracking System Data

The Savannah River Site (SRS) is a U.S. Department of Energy facility with an area of 310 square miles. Since its opening in 1951, SRS has produced and processed nuclear materials for national defense and industrial purposes. These activities have resulted in the release of radiocesium (Cs-137) which has led to contamination of associated streams, floodplains, man-made reservoirs, soil and vegetation. Contamination is spread to wild pigs as they move about SRS, consume vegetation, drink water and wallow in soil. SRS provides annual deer hunts open to the public in which wild pigs may be taken as well. The Cs-137 concentration of each animal is determined before it is released to the hunter for consumption and a cumulative dose is retained for each individual hunter. These tasks are accomplished using the Hunter Dose Tracking System (HDTS). The data collected on SRS by the HDTS for White-Tailed deer has been extensively analyzed. A repeatable method for calculating the background radiocesium body burden for the SRS deer population was established by Gaines and Novak (2009,2016). This model was framed using Cs-137 contamination obtained via gamma over-flight data, the decay rate of radiocesium and the historical behavior observed in the SRS deer population. These parameters were used in a spatiotemporal analysis to estimate background Cs-137 body burdens (from global fallout, etc.), as well as the effect SRS activities may have. The purpose of this project is to modify the framework to represent the behavior of the wild pig population on SRS such that HDTS data collected may be analyzed similarly. The 2018 data were collected via the HDTS in the field to screen wild pigs dispatched by Forest Service - Savannah River. These data will provide insight for an analysis of seasonal variance in the body burdens of the SRS wild pig population. The HDTS quickly provided Cs-137 concentrations in the field, as well as automatically updated the electronic database. Space: Historically, the average home range of wild pigs on the Savannah River Site has been reported at approximately six square miles. This range was confirmed accurate as of July 2018, with the observed minimum and maximum at one and ten square miles respectively. This range was geoprocessed using ArcMap to project buffers based on 1991 gamma over-flight data. The buffers were constructed to originate at all Cs-137 contamination point coordinates and protrude outward in all directions for 1.5, 2.45 and 6 square miles. While the 2.45 mile buffer is theoretically representative of potential hog exposure based on the average home range, it does not consider the possibility of home ranges not uniform in shape. Therefore, the 1.5 and 6 mile buffers were also constructed as visual aids for determining the appropriate hunt compartments for background level considerations. The SRS is divided into numbered hunt compartments of varying size and shape. These compartment numbers are used during sponsored hunts to record the location in which a wild pig was dispatched. Time: The Gaines report determined deer analysis should be carried out at the half-decade level for the best representation of true body burdens. This is due to the impact natural factors, such as drought or flood, can have on the bioaccumulation of Cs-137. To determine the appropriate time scale for hog analysis, all available data was totaled and averaged at 1, 2, 3 and 7 year increments. The annual averages and running average are provided. The appropriate compartments for the determination of the SRS hog population background level should be: 2, 3, 4, 9, 10, 14 and 15. Hogs dispatched within other compartments are most likely exposed to Cs-137 contamination and should not be included in the background level. The current dataset is small, but was still able to demonstrate the relationship between where hogs on SRS and the Cs-137 body burdens they incur. Geoprocessing the data using the average home range of wild pigs highlighted the importance of collecting additional samples from areas surrounding SRS if an accurate background is to be determined. When the average concentration of Cs-137 in pigs from background compartments is compared against that of pigs from contaminated compartments, a significant difference can be seen. A Table provides a summary of the analyzed data from the 15 years processed thus far.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Spent fuel temperature and age determination from the analysis of uranium and plutonium isotopics

The capability to determine the age (time since irradiation) of spent fuel can be useful for verification and safeguards. While the age of spent fuel can be determined based on measurements of short-lived fission products, these measurements are not routinely done nor generally reported. As an alternative, age can also be determined if the uranium (U) and plutonium (Pu) isotopic values are available. Uranium isotopics are not strongly affected by fuel temperature, and bumup is determined from the {sup 235}U and {sup 236}U isotopic values. Age is calculated after estimating the {sup 241}Pu at the end of irradiation while accounting for the fuel temperature, which is determined from {sup 239}Pu or {sup 240}Pu. Burnup and age determinations are calibrated to reactor models that provide uranium and plutonium isotopics over the range of fuel irradiation. The reactor model must contain sufficient fidelity on details of the reactor type, fuel burnup, irradiation history, initial fuel enrichment and fuel temperature to obtain accurate isotopic calculations. If the latter four are unknown, they can be derived from the uranium and plutonium isotopics. Fuel temperature has a significant affect on the production of plutonium isotopics; therefore, one group cross section reactor models, such as ORIGEN, cannot be used for these calculations. Multi-group cross section set codes, such as Oak Ridge National Laboratory's TRITON code, must be used.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Functional analysis of Salix purpurea genes support roles for ARR17 and GATA15 as master regulators of sex determination

Abstract The Salicaceae family is of growing interest in the study of dioecy in plants because the sex determination region (SDR) has been shown to be highly dynamic, with differing locations and heterogametic systems between species. Without the ability to transform and regenerate Salix in tissue culture, previous studies investigating the mechanisms regulating sex in the genus Salix have been limited to genome resequencing and differential gene expression, which are mostly descriptive in nature, and functional validation of candidate sex determination genes has not yet been conducted. Here, we used Arabidopsis to functionally characterize a suite of previously identified candidate genes involved in sex determination and sex dimorphism in the bioenergy shrub willow Salix purpurea . Six candidate master regulator genes for sex determination were heterologously expressed in Arabidopsis, followed by floral proteome analysis. In addition, 11 transcription factors with predicted roles in mediating sex dimorphism downstream of the SDR were tested using DAP‐Seq in both male and female S. purpurea DNA. The results of this study provide further evidence to support models for the roles of ARR17 and GATA15 as master regulator genes of sex determination in S. purpurea , contributing to a regulatory system that is notably different from that of its sister genus Populus . Evidence was also obtained for the roles of two transcription factors, an AP2 / ERF family gene and a homeodomain‐like transcription factor, in downstream regulation of sex dimorphism.

60 APPLIED LIFE SCIENCES↗

Benchmarking Guanidinium Organosulfonate Hydrogen-Bonded Frameworks for Structure Determination of Encapsulated Guests

Single crystal X-ray diffraction (SCXRD) is arguably the most definitive method for molecular structure determination, but it is often challenged by compounds that are liquids or oils at room temperature or do not form crystals adequate for analysis. Our laboratory previously reported a simple, cost-effective, single-step crystallization method based on guanidinium organosulfonate (GS) hydrogen bonded frameworks for structure determination of a wide range of encapsulated guest molecules, including assignment of the absolute configuration of chiral centers. Herein, we expand on those results and report a head-to-head comparison of the GS method with adamantoid “molecular chaperones”, which have been reported to be useful hosts for structure determination. Inclusion compounds limited to only two GS hosts are characterized by low R1 values and Flack parameters, infrequent disorder of the host and guest, and manageable disorder when it does exist. The structures of some target molecules that were not included or resolved using the adamantoid chaperones were successfully included and resolved by the GS hosts, and vice versa. Of the 32 guests attempted by the GS method, 31 inclusion compounds afforded successful guest structure solutions, a 97% success rate. The GS hosts and adamantoid chaperones are complementary with respect to guest inclusion, arguing that both should be employed in the arsenal of methods for structure determination. Furthermore, the low cost of organosulfonate host components promises an accessible route to molecular structure determination for a wide range of users.

36 MATERIALS SCIENCE↗

Deep Learning Accelerated Determination of Hydride Locations in Metal Nanoclusters

Abstract Although the coordinates of the metal atoms can be accurately determined by X‐ray crystallography, locations of hydrides in metal nanoclusters are challenging to determine. In principle, neutron crystallography can be employed to pinpoint the hydride positions, but it requires a large crystal and a neutron source, which prevents its routine use. Here, we present a deep‐learning approach that can accelerate determination of hydride locations in single‐crystal X‐ray structure of metal nanoclusters of different sizes. We demonstrate the efficiency of our method in predicting the most probable hydride sites and their combinations to determine the total structure for two recently reported copper nanoclusters, [Cu 25 H 10 (SPhCl 2 ) 18 ] 3− and [Cu 61 (S t Bu) 26 S 6 Cl 6 H 14 ] + whose hydride locations have not been determined by neutron diffraction. Our method can be generalized and applied to other metal systems, thereby eliminating a bottleneck in atomically precise metal hydride nanochemistry.

Wang, Song↗

Deep Learning Accelerated Determination of Hydride Locations in Metal Nanoclusters

Although the coordinates of the metal atoms can be accurately determined by X-ray crystallography, locations of hydrides in metal nanoclusters are challenging to determine. In principle, neutron crystallography can be employed to pinpoint the hydride positions, but it requires a large crystal and a neutron source, which prevents its routine use. Here, we present a deep-learning approach that can accelerate determination of hydride locations in single-crystal X-ray structure of metal nanoclusters of different sizes. We demonstrate the efficiency of our method in predicting the most probable hydride sites and their combinations to determine the total structure for two recently reported copper nanoclusters, [Cu 25 H 10 (SPhCl 2 ) 18 ] 3- and [Cu 61 (S t Bu) 26 S 6 Cl 6 H 14 ] + whose hydride locations have not been determined by neutron diffraction. Our method can be generalized and applied to other metal systems, thereby eliminating a bottleneck in atomically precise metal hydride nanochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computation of determinant expansion coefficients within the graphically contracted function method.

Most electronic structure methods express the wavefunction as an expansion of N-electron basis functions that are chosen to be either Slater determinants or configuration state functions. Although the expansion coefficient of a single determinant may be readily computed from configuration state function coefficients for small wavefunction expansions, traditional algorithms are impractical for systems with a large number of electrons and spatial orbitals. In this work, we describe an efficient algorithm for the evaluation of a single determinant expansion coefficient for wavefunctions expanded as a linear combination of graphically contracted functions. Each graphically contracted function has significant multiconfigurational character and depends on a relatively small number of variational parameters called arc factors. Because the graphically contracted function approach expresses the configuration state function coefficients as products of arc factors, a determinant expansion coefficient may be computed recursively more efficiently than with traditional configuration interaction methods. Although the cost of computing determinant coefficients scales exponentially with the number of spatial orbitals for traditional methods, the algorithm presented here exploits two levels of recursion and scales polynomially with system size. Hence, as demonstrated through applications to systems with hundreds of electrons and orbitals, it may readily be applied to very large systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methyl α‐D‐galactopyranosyl‐(1→3)‐β‐D‐galactopyranoside and methyl β‐D‐galactopyranosyl‐(1→3)‐β‐D‐galactopyranoside: Glycosidic linkage conformation determined from MA'AT analysis

Abstract MA'ATanalysis has been applied to two biologically‐importantO‐glycosidic linkages in two disaccharides, α‐D‐Galp‐(1→3)‐β‐D‐GalpOMe (3) and β‐D‐Galp‐(1→3)‐β‐D‐GalpOMe (4). Using density functional theory (DFT) to obtain parameterized equations relating a group of trans‐O‐glycosidic NMR spin‐couplings to eitherphi(ϕ') orpsi(ψ'), and experimental 3 J COCH , 2 J COC , and 3 J COCC spin‐couplings measured in aqueous solution in 13 C‐labeled isotopomers, probability distributions ofϕ'andψ'in each linkage were determined and compared to those determined by aqueous 1‐μs molecular dynamics (MD) simulation. Good agreement was found between theMA'ATand single‐state MD conformational models of these linkages for the most part, with modest (approximately <15°) differences in the mean values ofϕ'andψ', although the envelope of allowed angles (encoded in circular standard deviations or CSDs) is consistently larger forϕ'determined fromMA'ATanalysis than from MD for both linkages. TheMA'ATmodel of the α‐Galp‐(1→3)‐β‐Galplinkage agrees well with those determined previously using conventional NMR methods ( 3 J COCH values and/or 1 H‐ 1 H NOEs), but some discrepancy was observed for the β‐Galp‐(1→3)‐β‐Galplinkage, which may arise from errors in the conventions used to describe the linkage torsion angles. Statistical analyses of X‐ray crystal structures show ranges ofϕ'andψ'for both linkages that include the mean angles determined fromMA'ATanalyses, although both angles adopt a wide range of values in the crystalline state, withϕ'in β‐Galp‐(1→3)‐β‐Galplinkages showing greater‐than‐expected conformational variability.

Chemistry↗

Determination of Earths transient and equilibrium climate sensitivities from observations over the twentieth century: Strong dependence on assumed forcing

Relations among observed changes in global mean surface temperature, ocean heat content, ocean heating rate, and calculated radiative forcing, all as a function of time over the twentieth century, that are based on a two-compartment energy balance model, are used to determine key properties of Earth's climate system. The increase in heat content of the world ocean, obtained as the average of several recent compilations, is found to be linearly related to the increase in global temperature over the period 1965-2009; the slope, augmented to account for additional heat sinks, which is an effective heat capacity of the climate system, is 21.8 {+-} 2.1 W year m{sup -2} K{sup -1} (one sigma), equivalent to the heat capacity of 170 m of seawater (for the entire planet) or 240 m for the world ocean. The rate of planetary heat uptake, determined from the time derivative of ocean heat content, is found to be proportional to the increase in global temperature relative to the beginning of the twentieth century with proportionality coefficient 1.05 {+-} 0.06 W m{sup -2} K{sup -1}. Transient and equilibrium climate sensitivities were evaluated for six published data sets of forcing mainly by incremental greenhouse gases and aerosols over the twentieth century as calculated by radiation transfer models; these forcings ranged from 1.1 to 2.1 W m{sup -2}, spanning much of the range encompassed by the 2007 assessment of the Intergovernmental Panel on Climate Change (IPCC). For five of the six forcing data sets, a rather robust linear proportionality obtains between the observed increase in global temperature and the forcing, allowing transient sensitivity to be determined as the slope. Equilibrium sensitivities determined by two methods that account for the rate of planetary heat uptake range from 0.31 {+-} 0.02 to 1.32 {+-} 0.31 K (W m{sup -2}){sup -1} (CO{sub 2} doubling temperature 1.16 {+-} 0.09-4.9 {+-} 1.2 K), more than spanning the IPCC estimated 'likely' uncertainty range, and strongly anticorrelated with the forcing used to determine the sensitivities. Transient sensitivities, relevant to climate change on the multidecadal time scale, are considerably lower, 0.23 {+-} 0.01 to 0.51 {+-} 0.04 K (W m{sup -2}){sup -1}. The time constant characterizing the response of the upper ocean compartment of the climate system to perturbations is estimated as about 5 years, in broad agreement with other recent estimates, and much shorter than the time constant for thermal equilibration of the deep ocean, about 500 years.

54 ENVIRONMENTAL SCIENCES↗

“Age” Determination of Irradiated Materials Utilizing Inductively Coupled Plasma Mass Spectrometric (ICP-MS) Detection

A gas pressurized extraction chromatography (GPEC) system has been developed to perform elemental separations on radioactive samples to determine total and isotopic compositions of Cs and Ba from an irradiated salt sample, fuel sample and two sealed radiation sources. The separation is necessary to remove isobaric interferences in the determination of 137Cs, 135Cs, 137Ba, 135Ba, which are used to determine the age of a sample from radioactive decay or purification. The micro-column extraction chromatography system employs compressed nitrogen to move liquid through the system, compared to gravity or pumped liquids that are typically used for separations. The use of compressed gas allows for accurate and precise recovery of all liquids put into the chromatography system, enabling very accurate dilutions. The use of a small analytical column permits the use of very small amounts of liquids to be used. As a benefit, the amount of radiological waste that is generated in the separation process is minimized. For this work, a commercially available Sr-Resin™ was used to perform the separation for the above mentioned analytes. The column consists of a 7 inch piece of 1/16 in. O.D. x 0.030 in I.D. Teflon™ tubing having an internal volume of 81 µL. To this column, 49 mg of resin was added. The columns are re-usable after regeneration with 3 M HNO3. All samples were separated using batch collection, although real time analysis is possible with the current experimental design. A 1 % acetic acid solution was determined to be the best extractant for Ba. A flow rate of 0.1 mL/min was determined to be optimal for the separation of Ba. Complete recovery of the Cs and Ba was achieved, within the systematic error of the experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Total cyanide mass measurement with micro-ion selective electrode for determination of specific activity of carbon-11 cyanide

In this study, we aim to directly measure the specific activity (SA) of the carbon-11 cyanide ([ 11 C]CN¯) produced by our in-house built automated [ 11 C]HCN production system and to identify the major sources of 12 C-cyanide ( 12 CN¯). The [ 11 C]CN¯ is produced from [ 11 C]CO 2 , which is generated by the 14 N(p,α) 11 C nuclear reaction using a cyclotron. Direct measurement of cyanide concentrations was accomplished using a relatively inexpensive, and easy to use ion selective electrode (ISE) which offered an appropriate range of sensitivity for detecting mass. Multiple components of the [ 11 C]HCN production system were isolated in order to determine their relative contributions to 12 CN¯ mass. It was determined that the system gases were responsible for approximately 30% of the mass, and that the molecular sieve/nickel furnace unit contributed approximately 70% of the mass. Beam on target (33 µA for 1 and 10 min) did not contribute significantly to the mass. Additionally, we compared the SA of our [ 11 C]HCN precursor determined using the ISE to the SA of our current [ 11 C]CN¯ derived radiotracers determined by HPLC to assure there was no significant difference between the two methods. These results are the first reported use of an ion selective electrode to determine the SA of no-carrier-added cyanide ion, and clearly show that it is a valuable, inexpensive and readily available tool suitable for this purpose.

42 ENGINEERING↗

Mining project's economic impact on local communities, as a social determinant of health: A documentary analysis of environmental impact statements

Australian mining developments cause indirect economic impacts on nearby communities leading to poor health and wellbeing of local residents. Economic instability is a recognised social determinant of health (SDoH); however, SDoHs are rarely considered adequately in Environmental Impact Assessments (EIAs). This research aimed to determine the extent economic impacts as a SDoH are considered in three Environmental Impact Statements (EISs) of mining projects in the New South Wales, Australia. We adopted an exploratory case study design following Yin (2012). Three cases in New South Wales, Australia, were purposively sampled as being of concern to the local community who had sought legal advice about the content of the EIS (although not necessarily for health reasons). Two were open cut mines: Watermark located in the Liverpool Plains and Warkworth Continuation in the Hunter Valley Region. The third is a comparative case – the underground Mandalong Southern Extension located in Lake Macquarie. We adapted a health-focused EIA coding framework to investigate how economic indicators as SDoH were explicitly mentioned in EISs and applied this to the three cases. Economic indicators as SDoH were rarely considered. There was a greater focus on population characteristics rather than the potential economic impacts of the mining projects on the communities. Causal association of economic determinants and health outcomes were insufficiently reported compared to best practice, and health data were not used to inform assessments. Despite two EISs – Warkworth Continuation and Watermark – associating some economic indicators to health outcomes, impacts were not adequately discussed when compared to the known literature on economic impacts of mines. Our findings show that the three EISs were inadequately utilised to determine economic impacts of mining projects on the health and wellbeing of local communities. The evidence base linking economic impacts of mines to health is underdeveloped, which compromises assessing the quality of economic coverage in EISs. EIA scoping should enable sufficient inclusion of broader determinants of health using appropriate methodology, and the economic-focused content of EISs should be subject to rigorous peer-review process to fully inform government approvals for projects. Our methods lend themselves to research in other contexts to investigate the quality of EIAs.

54 ENVIRONMENTAL SCIENCES↗

Interfraction Prostate Rotation Determined from In-Room Computerized Tomography Images

Fiducial markers (FMs) are commonly used as a correction technique for interfraction translations of the prostate. The aim of this investigation was to determine the magnitude of prostate rotations using 2 methods: FM coordinates and the anatomical border of the prostate and rectum. Daily computed tomography (CT) scans (n = 346) of 10 prostate cancer patients with 3 implanted FMs were acquired using the CT on rails. FM coordinates were used to determine rotation in the sagittal, transverse, and coronal planes, and CT contours of the prostate and rectum were used to determine rotation along the sagittal plane. An adaptive technique based on a subset of images (n = 6; planning and first 5 treatment CTs) to reduce systematic rotation errors in the sagittal plane was tested. The standard deviation (SD) of systematic rotation from FM coordinates was 7.6{sup o}, 7.7{sup o}, and 5.0{sup o} in the sagittal, transverse and coronal planes. The corresponding SD of random error was 10.2{sup o}, 15.8{sup o}, and 6.5{sup o}. Errors in the sagittal plane, determined from prostate and rectal contours, were 10.1{sup o} (systematic) and 7.7{sup o} (random). These results did not correlate with rotation computed from FM coordinates (r = -0.017; p = 0.753, n = 337). The systematic error could be reduced by 43% to 5.6{sup o} when the mean prostate position was estimated from 6 CT scans. Prostate rotation is a significant source of error that appears to be more accurately determined using the anatomical border of the prostate and rectum rather than FMs, thus highlighting the utility of CT image guidance.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Determination of energy correction coefficient for neutron albedo dosimeter. Three approaches

To accurately determine dose, albedo TLD dosimeters require application of a neutron energy correction factor (NECF). Here, in this paper, the results from three different methods were used to determine NECFs. In the first method, NECF values were calculated as a ratio of the known “conventional true” dose and the neutron dose reported by albedo dosimeter(s) irradiated on a phantom. The results from this direct method were utilized for verification of two other methods. The second method used a specially designed device called the Neutron Area Monitor (NAM) model 5. The third method of NECF determination was based on the response of a BF 3 tube under different levels of moderation. The results of this work showed that the Navy-developed Neutron Area Monitor (NAM) model 5 measures NECF values correctly when irradiated with 252 Cf (bare and D 2 O-moderated). This was an important result, because it validated the use of the NAM-5 in nuclear power and marine propulsion reactors, as their neutron energy spectrum is approximated by the field of a Cadmium-coated 30 cm diameter steel sphere of D 2 O moderated 252 Cf. In the case of a broad neutron energy spectrum the 6 Li response to the small amount of slow neutrons outweighs its response to the fast neutrons overwhelmingly responsible for the neutron dose rate. Based on the obtained results we can conclude that NAM-5 provides correct NECF determination if the fraction of slow neutrons in the neutron dose rate is more than 20%. A satisfactory correlation between the NECF determined by NAM-5 and the multi-moderated BF3 tube method was observed, but the multi-moderated BF 3 tube values were ~30% lower than those obtained by the NAM-5 at the same locations for broader neutron energy spectrum locations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DEHP exposure in utero disturbs sex determination and is potentially linked with precocious puberty in female mice

Human's ubiquitous exposure to di (2-ethylhexyl) phthalate (DEHP) is thought to be associated with female reproductive toxicity. Previous studies found that DEHP inhibited follicle growth and decreased estradiol levels in adult female mice. However, limited information is available on the link between in utero DEHP exposure and ovarian development in female mouse offspring. The present study evaluates the disturbances in regulatory genes involved in female sex determination and the ovarian outcomes in fetal and postnatal female mice treated with in utero DEHP exposure. Pregnant mice were exposed to DEHP by gavage, with the dosage regime beginning at human relevant exposure levels. After in utero DEHP exposure, increased follicular atresia was observed in the female pups at postnatal days (PND) 21. Foxl2 expression was significantly upregulated, and Fst was significantly downregulated by DEHP above 2 mg/kg/d at PND 1 and 21. This suggests that lesion of granulosa cell differentiation and disturbance of follicle development in postnatal female mice. The expression of Cyp11a1 and Star were significantly downregulated by in utero DEHP exposure, indicating effects on estradiol biosynthesis. The female sex determination pathway was disturbed in fetus by DEHP at 2 mg/kg/d and above during the critical time window of sex determination causing significant upregulation of Foxl2, Wnt4, β-catenin and Fst. Furthermore, the increased expression of Wnt4 was supported by whole-mount in situ hybridization (WISH). These results suggest a possible association between in utero DEHP exposure and precocious puberty in the postnatal life of mice offspring, where disturbance of the sex determination regulating pathway acted as an important mechanism. - Highlights: • Maternal exposure to di (2-ethylhexyl) phthalate disturbs fetus sex determination. • DEHP upregulated Foxl2 expression potentially disturbs postnatal granulosa cell differentiation. • DEHP accelerated medulla follicular atresia potentially leading to precocious puberty.

60 APPLIED LIFE SCIENCES↗

Initial Characterization and Optimization of the Liquid Sampling-Atmospheric Pressure Glow Discharge Ionization Source Coupled to an Orbitrap Mass Spectrometer for the Determination of Plutonium

Plutonium measurements are essential to the nuclear forensics and safeguards community. The liquid sampling-atmospheric pressure glow discharge (LS-APGD) microplasma ionization source coupled with an Orbitrap mass spectrometer is a proven platform for uranium isotope ratio determinations. Here, this work expands the LS-APGD-Orbitrap platform capabilities by reporting the first-ever analysis of plutonium with the LS-APGD and the first-ever measurement of elemental plutonium with an Orbitrap mass spectrometer. This coupling has the potential to dramatically reduce the complex sample manipulations required for traditional analysis techniques employed for actinide isotope ratio determinations. As a first step toward the goal of simultaneous uranium and plutonium isotope ratio determinations, the initial characterization and optimization of the platform for the detection of plutonium are reported. Collision-induced dissociation modality settings were optimized to reduce water-related and other molecular clusters containing plutonium, maximizing 242 Pu 16 O 2 + responses. A design of experiments study was conducted to optimize the discharge conditions of the dual-electrode LS-APGD toward the responsivity of 242 Pu 16 O 2 +. The measurement sensitivity was determined from a Pu response curve, yielding a limit of detection of 10 fg (absolute) of total analyte when data was collected and processed with a Spectroswiss FTMS Booster X2 data acquisition system. Additionally, plutonium and uranium were measured in a simultaneous acquisition, and each analyte remained unaffected by the other. It is believed that the LS-APGD-Orbitrap platform could be a valuable addition to the nuclear forensics’ toolbox and, indeed, other scientific disciplines and regulatory communities in which rapid, high-resolution plutonium determinations are paramount.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method of determination of AlGaAsSb layer composition in molecular beam epitaxy processes with regard to unintentional As incorporation

The accurate determination of the chemical composition of multicomponent antimonide layers still remains difficult. The problem becomes even more complicated when group III antimonides are grown in a MBE chamber that is also used for the growth of group III arsenides. In this paper, the composition of MBE grown AlGaAsSb layers is investigated in the context of unintentional arsenic incorporation. Control of the As concentration and a determination of the AlGaSb composition are crucial for an accurate calculation of the AlGaAsSb stoichiometry. It has been found that when using diffraction measurements with an As detection limit of 0.087%, the Al content in Al{sub 0.5}Ga{sub 0.5}Sb is determined with an accuracy of {+-}1%. Taking into account the GaSb reference from secondary ion mass spectrometry, the accuracy can be increased to {+-}0.52% of Al. The Al/Ga ratio determined for AlGaSb layers is further used for the calculation of the As content in AlGaAsSb alloys grown under the same technological conditions as the ternary layer. As a result, the procedure for the accurate determination of stoichiometry coefficients in this material is recommended.

36 MATERIALS SCIENCE↗

Wall loss of atomic nitrogen determined by ionization threshold mass spectrometry

In the afterglow of an inductively coupled N{sub 2} plasma, relative N atom densities are measured by ionization threshold mass spectrometry as a function of time in order to determine the wall loss time t{sub wN} from the exponential decay curves. The procedure is performed with two mass spectrometers on different positions in the plasma chamber. t{sub wN} is determined for various pressures, i.e., for 3.0, 5.0, 7.5, and 10 Pa. For this conditions also the internal plasma parameters electron density n{sub e} and electron temperature T{sub e} are determined with the Langmuir probe and the rotational temperature T{sub rot}{sup N{sub 2}} of N{sub 2} is determined with the optical emission spectroscopy. For T{sub rot}{sup N{sub 2}}, a procedure is presented to evaluate the spectrum of the transition υ{sup ′}=0→υ{sup ″}=2 of the second positive system (C{sup 3}Π{sub u}→B{sup 3}Π{sub g}) of N{sub 2}. With this method, a gas temperature of 610 K is determined. For both mass spectrometers, an increase of the wall loss times of atomic nitrogen with increasing pressure is observed. The wall loss time measured with the first mass spectrometer in the radial center of the cylindrical plasma vessel increases linearly from 0.31 ms for 3 Pa to 0.82 ms for 10 Pa. The wall loss time measured with the second mass spectrometer (further away from the discharge) is about 4 times higher. A model is applied to describe the measured t{sub wN.} The main loss mechanism of atomic nitrogen for the considered pressure is diffusion to the wall. The surface loss probability β{sub N} of atomic nitrogen on stainless steel was derived from t{sub wN} and is found to be 1 for the present conditions. The difference in wall loss times measured with the mass spectrometers on different positions in the plasma chamber is attributed to the different diffusion lengths.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗