Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DATA CONVERSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Effect of Carbon Deposition on the Oxidation Rate of Copper/Bentonite in the Chemical Looping Process

The presented work is part of the Industrial Carbon Management Initiative (ICMI) on the development of metal oxide oxygen carriers for use in the chemical looping combustion process. An oxygen carrier, CuO/bentonite (60:40%), was reacted with methane gas and then oxidized in air. The change in weight and reaction gas concentrations were measured using a thermogravimetric analyzer (TGA) equipped with a real-time gas analyzer. The reduction–oxidation cycle was conducted within the temperature range of 750–900 °C for 10 cycles, using 20, 50, and100% CH{sub 4} concentrations in N{sub 2} for the reduction segment and dry air for the oxidation segment. Several analysis methods were evaluated to fit the oxidation of reduced CuO (i.e., Cu) data over the complete conversion range with suitable rate expressions derived from existing models for oxidation, including the shrinking core model (diffusion and reaction control), first- and second-order reaction rates, parallel and series reaction mechanisms, and Johnson–Mehl–Avrami (JMA) rate. The best agreement between the experimental data and the models of the Cu oxidation was accomplished using the JMA model. The reactivity of the oxygen carrier during the oxidation reactions was affected by the CH{sub 4} concentration as well as the temperature. The rate of fractional uptake of oxygen onto the carrier decreased as the temperature increased, contrary to expectations and indicative that the mechanism is changing during the test. Analysis of the exit gas provided evidence of carbon deposition on the reduced sorbent particle and resulted in the CO{sub 2} product upon oxidation. The oxidation of this carbon releases significant heat that is capable of changing the particle morphology (Zhu, Y.; Mimura, K.; Isshiki, M. Oxid. Met. 2004, 62, 207-222). On the basis of experimental results, the overall reaction process in the fuel reactor may be considered to consist of the decomposition of CH{sub 4} into C and H{sub 2} and reduction of CuO/bentonite by the resulting H{sub 2} and the parallel reaction of CH{sub 4} with CuO/bentonite. The extent of carbon deposition in the carrier particle increased with an increasing temperature and CH{sub 4} concentration. This deposited carbon not only leads to CO{sub 2} release from the oxidation reactor but, more importantly, causes degredation of the carrier capacity and its reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conversion of a transverse density modulation into a longitudinal phase space modulation using an emittance exchange technique

We report on an experiment to produce a train of sub-picosecond microbunches using a transverse-to-longitudinal emittance exchange technique. The generation of a modulation on the longitudinal phase space is done by converting an initial horizontal modulation produced using a multislits mask. The preliminary experimental data clearly demonstrate the conversion process. To date only the final energy modulation has been measured. However numerical simulations, in qualitative agreement with the measurements, indicate that the conversion process should also introduce a temporal modulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental characterization of hot-electron emission and shock dynamics in the context of the shock ignition approach to inertial confinement fusion

We report on planar target experiments conducted on the OMEGA-EP laser facility performed in the context of the shock ignition (SI) approach to inertial confinement fusion. The experiment aimed at characterizing the propagation of strong shock in matter and the generation of hot electrons (HEs), with laser parameters relevant to SI (1-ns UV laser beams with I ~10 16 W/cm 2 ). Time-resolved radiographs of the propagating shock front were performed in order to study the hydrodynamic evolution. The hot-electron source was characterized in terms of Maxwellian temperature, T h , and laser to hot-electron energy conversion efficiency η using data from different x-ray spectrometers. The post-processing of these data gives a range of the possible values for T h and η [i.e., T h [keV] ϵ (20, 50) and η ϵ (2%, 13%)]. These values are used as input in hydrodynamic simulations to reproduce the results obtained in radiographs, thus constraining the range for the HE measurements. According to this procedure, we found that the laser converts ~10% ± 4% of energy into hot electrons with T h = 27 ± 8 keV. The paper shows how the coupling of different diagnostics and numerical tools is required to sufficiently constrain the problem, solving the large ambiguity coming from the post-processing of spectrometers data. The effect of the hot electrons on the shock dynamics is then discussed, showing an increase in the pressure around the shock front. Furthermore, the low temperature found in this experiment without pre-compression laser pulses could be advantageous for the SI scheme, but the high conversion efficiency may lead to an increase in the shell adiabat, with detrimental effects on the implosion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A user-friendly, menu-driven, language-free laser characteristics curves graphing program for desk-top IBM PC compatible computers

A facility was established that uses collected data and feeds it into mathematical models that generate improved data arrays by correcting for various losses, base line drift, and conversion to unity scaling. These developed data arrays have headers and other identifying information affixed and are subsequently stored in a Laser Materials and Characteristics data base which is accessible to various users. The two part data base: absorption - emission spectra and tabulated data, is developed around twelve laser models. The tabulated section of the data base is divided into several parts: crystalline, optical, mechanical, and thermal properties; aborption and emission spectra information; chemical name and formulas; and miscellaneous. A menu-driven, language-free graphing program will reduce and/or remove the requirement that users become competent FORTRAN programmers and the concomitant requirement that they also spend several days to a few weeks becoming conversant with the GEOGRAF library and sequence of calls and the continual refreshers of both. The work included becoming thoroughly conversant with or at least very familiar with GEOGRAF by GEOCOMP Corp. The development of the graphing program involved trial runs of the various callable library routines on dummy data in order to become familiar with actual implementation and sequencing. This was followed by trial runs with actual data base files and some additional data from current research that was not in the data base but currently needed graphs. After successful runs, with dummy and real data, using actual FORTRAN instructions steps were undertaken to develop the menu-driven language-free implementation of a program which would require the user only know how to use microcomputers. The user would simply be responding to items displayed on the video screen. To assist the user in arriving at the optimum values needed for a specific graph, a paper, and pencil check list was made available to use on the trial runs.

Klutz, Glenn↗

First Plant Cell Atlas symposium report

The Plant Cell Atlas (PCA) community hosted a virtual symposium on December 9 and 10, 2021 on single cell and spatial omics technologies. The conference gathered almost 500 academic, industry, and government leaders to identify the needs and directions of the PCA community and to explore how establishing a data synthesis center would address these needs and accelerate progress. This report details the presentations and discussions focused on the possibility of a data synthesis center for a PCA and the expected impacts of such a center on advancing science and technology globally. Community discussions focused on topics such as data analysis tools and annotation standards; computational expertise and cyber-infrastructure; modes of community organization and engagement; methods for ensuring a broad reach in the PCA community; recruitment, training, and nurturing of new talent; and the overall impact of the PCA initiative. These targeted discussions facilitated dialogue among the participants to gauge whether PCA might be a vehicle for formulating a data synthesis center. The conversations also explored how online tools can be leveraged to help broaden the reach of the PCA (i.e., online contests, virtual networking, and social media stakeholder engagement) and decrease costs of conducting research (e.g., virtual REU opportunities). Major recommendations for the future of the PCA included establishing standards, creating dashboards for easy and intuitive access to data, and engaging with a broad community of stakeholders. The discussions also identified the following as being essential to the PCA's success: identifying homologous cell-type markers and their biocuration, publishing datasets and computational pipelines, utilizing online tools for communication (such as Slack), and user-friendly data visualization and data sharing. In conclusion, the development of a data synthesis center will help the PCA community achieve these goals by providing a centralized repository for existing and new data, a platform for sharing tools, and new analytical approaches through collaborative, multidisciplinary efforts. A data synthesis center will help the PCA reach milestones, such as community-supported data evaluation metrics, accelerating plant research necessary for human and environmental health.

59 BASIC BIOLOGICAL SCIENCES↗

Data Science-Driven Discovery of Multimetallic Oxygen-cycle Electrocatalysts for Enhanced Energy Conversion

The overarching objective of this effort has been to combine state-of-the-art data science techniques, first principles analyses, and molecular-level characterization of electrocatalyst structure and reactivity to identify both in-situ mechanisms for degradation and transformation of electrocatalysts with highly complex catalytic structures and the impact of these transformations on catalytic activity. The primary catalysts of interest have been multielemental alloys, including high entropy alloys (HEA’s), which are characterized by a high degree of disorder and up to 20 different elements within a single nanoparticle. We have applied these strategies primarily to energy-critical oxygen cycle electrocatalytic reactions, including oxygen reduction (ORR), but we have also considered extensions to non-electrochemical chemistries such as ammonia synthesis and decomposition. We have made strong progress in the development of computational methods on both the level of machine learning methods development as well as first principles-based treatments of HEA’s, and we have leveraged these insights to propose promising HEA catalysts for the ORR. On the experimental side, we developed new HEA synthesis and characterization protocols relevant to these reactions and developed a database combining our experimental results with corresponding computational tools.

36 MATERIALS SCIENCE↗

Tropospheric range error parameters: Further studies

Improved parameters are presented for predicting the tropospheric effect on electromagnetic range measurements from surface meteorological data. More geographic locations have been added to the earlier list. Parameters are given for computing the dry component of the zenith radio range effect from surface pressure alone with an rms error of 1 to 2 mm, or the total range effect from the dry and wet components of the surface refractivity and a two-part quartic profile model. The new parameters are obtained, as before, from meteorological balloon data but with improved procedures, including the conversion of the geopotential heights of the balloon data to actual or geometric heights before using the data. The revised values of the parameter k (dry component of vertical radio range effect per unit pressure at the surface) show more latitude variation than is accounted for by the variation of g, the acceleration of gravity.

Hopfield, H. S.↗

Gas Flow Detection System

This system provides a portable means to detect gas flow through a thin-walled tube without breaking into the tubing system. The flow detection system was specifically designed to detect flow through two parallel branches of a manifold with only one inlet and outlet, and is a means for verifying a space shuttle program requirement that saves time and reduces the risk of flight hardware damage compared to the current means of requirement verification. The prototype Purge Vent and Drain Window Cavity Conditioning System (PVD WCCS) Flow Detection System consists of a heater and a temperature-sensing thermistor attached to a piece of Velcro to be attached to each branch of a WCCS manifold for the duration of the requirement verification test. The heaters and thermistors are connected to a shielded cable and then to an electronics enclosure, which contains the power supplies, relays, and circuit board to provide power, signal conditioning, and control. The electronics enclosure is then connected to a commercial data acquisition box to provide analog to digital conversion as well as digital control. This data acquisition box is then connected to a commercial laptop running a custom application created using National Instruments LabVIEW. The operation of the PVD WCCS Flow Detection System consists of first attaching a heater/thermistor assembly to each of the two branches of one manifold while there is no flow through the manifold. Next, the software application running on the laptop is used to turn on the heaters and to monitor the manifold branch temperatures. When the system has reached thermal equilibrium, the software application s graphical user interface (GUI) will indicate that the branch temperatures are stable. The operator can then physically open the flow control valve to initiate the test flow of gaseous nitrogen (GN2) through the manifold. Next, the software user interface will be monitored for stable temperature indications when the system is again at thermal equilibrium with the test flow of GN2. The temperature drop of each branch from its "no flow" stable temperature peak to its stable "with flow" temperature will allow the operator to determine whether a minimum level of flow exists. An alternative operation has the operator turning on the software only long enough to record the ambient temperature of the tubing before turning on the heaters and initiating GN2 flow. The stable temperature of the heated tubing with GN2 flow is then compared with the ambient tubing temperature to determine if flow is present in each branch. To help quantify the level of flow in the manifolds, each branch will be bench calibrated to establish its thermal properties using the flow detection system and different flow rates. These calibration values can then be incorporated into the software application to provide more detailed flow rate information.

Moss, Thomas↗

Full observation of ultrafast cascaded radiationless transitions from S{sub 2}(ππ{sup ∗}) state of pyrazine using vacuum ultraviolet photoelectron imaging

A photoexcited molecule undergoes multiple deactivation and reaction processes simultaneously or sequentially, which have been observed by combinations of various experimental methods. However, a single experimental method that enables complete observation of the photo-induced dynamics would be of great assistance for such studies. Here we report a full observation of cascaded electronic dephasing from S{sub 2}(ππ{sup *}) in pyrazine (C{sub 4}N{sub 2}H{sub 4}) by time-resolved photoelectron imaging (TRPEI) using 9.3-eV vacuum ultraviolet pulses with a sub-20 fs time duration. While we previously demonstrated a real-time observation of the ultrafast S{sub 2}(ππ{sup *}) → S{sub 1}(nπ{sup *}) internal conversion in pyrazine using TRPEI with UV pulses, this study presents a complete observation of the dynamics including radiationless transitions from S{sub 1} to S{sub 0} (internal conversion) and T{sub 1}(nπ{sup *}) (intersystem crossing). Also discussed are the role of {sup 1}A{sub u}(nπ{sup *}) in the internal conversion and the configuration interaction of the S{sub 2}(ππ{sup *}) electronic wave function.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scientific and economic potential of the SEASAT Program

The SEASAT satellite system is planned as a user-oriented system for timely monitoring of global ocean dynamics and mapping the global ocean geoid. The satellite instrumentation and modular concept are discussed. Operational data capabilities will include oceanographic data services, direct satellite read-out to users, and conversational retrieval and analysis of stored data. A case-study technique, generalized through physical and econometric modeling, indicates potential economic benefit from SEASAT to users in the following areas: ship routing, iceberg reconnaissance, arctic operations, Alaska pipeline ship link, and off-shore oil production.

Mccandless, S. W.↗

Braxton Marlatt Intern Poster

The Internet of Things (IoT) encompasses a vast network of interconnected devices embedded with software, sensors, and network connectivity, enabling data collection and exchange. While IoT technology revolutionizes various industries, it also introduces significant security challenges. This research focuses on enhancing IoT security through the implementation of Zero Trust Architecture concepts, specifically targeting the Network and Device pillars of the Cybersecurity and Infrastructure Security Agency’s Zero Trust Maturity Model. By generating Codified Attack Surfaces (CAS) using custom Structured Threat Information eXpression bundles, this project aims to provide enhanced visibility into network communications, detect vulnerabilities in device firmware, and improve the overall security posture for IoT devices and networks. The methodology involves defining custom STIX schema and objects, collecting data from intra-IoT traffic, external network traffic, and firmware analysis, and automating the conversion and correlation of this data into STIX bundles. The automated generation of attack surfaces offers comprehensive insights into activity, vulnerabilities, and anomalies within an IoT environment, enabling proactive threat identification and mitigation.

24 - POWER TRANSMISSION AND DISTRIBUTION↗

Regional Feedstock Partnership Biomass Quality Assessment Final Report

The United States (U.S.) Department of Energy (DOE) developed the Billion-Ton Vision to enable production of one-billion tons of sustainable, reliable biomass for the bioenergy industry by 2030 (Perlack et al., 2005). The Sun Grant Regional Feedstock Partnership (RFP) was organized to fill information gaps and validate biomass yield assumptions related to the Billion-Ton Study (Owens, 2018; Owens, Karlen, and Lacey, 2016). Along with the more than 130 scientific publications generated from these studies, yield and sustainability data from the RFP field trials not only validated the Billion-Ton estimates, but were critical in developing both the U.S. Billion-Ton Update report in 2011 and the 2016 Billion-Ton Report (DOE, 2011; 2016). The intention of this biomass quality assessment report is to build on these initial successes from the RFP field trials by focusing on variability in biomass quality data necessary to evaluate conversion performance. This report contains a summary of chemical quality results from samples collected as part of the RFP field trials. This report focuses on assessment of the impact of experimental agronomic designs on biomass properties followed by analyses of the impact of environmental and production variables on biomass properties. Datasets include species and other genetic variables, fertilizer treatments, harvest information, and yield, as well as other publicly available data such as precipitation, temperature, soil properties, and drought. The key outcomes from this chemical quality focused assessment have included: • Complete evaluation of the impacts of agronomic designs, genetics, and environmental conditions on chemical properties for Miscanthus, switchgrass, sorghum, energycane, mixed perennial grasses, and shrub willow short-rotation feedstocks • Over 30 peer review publications and technical reports focused on variability in quality data • Development of spatial and temporal environmental quality prediction maps for Miscanthus and switchgrass feedstocks allowing for comprehensive evaluation of variability in feedstock chemical quality across U.S. regions and over multiple harvest years

09 BIOMASS FUELS↗

CO{sub 2} and H{sub 2}O gasification kinetics of a coal char in the presence of methane

The kinetics of CO{sub 2} and H{sub 2}O gasification of a Chinese coal char in the presence of methane has been studied using a thermogravimetric analyzer (TGA) in the temperature range from 1173 to 1273 K. It was observed that the rate of carbon conversion increased with an increasing temperature and decreased with an increasing CH{sub 4} concentration. The rate of carbon conversion during the gasification of the char experienced a maximum without the presence of methane but decreased continuously with carbon conversion in the presence of methane. Carbon deposition from CH{sub 4} cracking reduced the overall rate of carbon conversion during gasification, but this effect was reduced as the temperature and concentration of CO{sub 2} or H{sub 2}O were increased. A gas-solid reaction shrinking core model was developed and applied to the char-CH{sub 4}-CO{sub 2}/H{sub 2}O systems. The experimental results were used to determine the kinetic parameters. The model predictions compared favorably to the measured data. The overall carbon conversion rate has been shown to be a combination of carbon gasification, by CO{sub 2} or H{sub 2}O, respectively, and methane cracking. 11 refs., 12 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Integrated Direct Air Capture and H₂-Free CO₂ Valorization

This project advances fundamental understanding of a novel integrated direct air capture (DAC) and CO₂ conversion process that valorizes atmospheric CO₂ without external H₂. The research encompasses four critical components: (1) design of task-specific ionic liquids for efficient CO₂ capture under ambient conditions, (2) development of H₂-free tandem catalytic systems using ethane as a reductant, (3) advanced operando characterization to elucidate capture and conversion mechanisms, and (4) data science-driven predictive computation to accelerate material discovery. Over the project period, we developed five high-performance DAC sorbent systems—including CaO/superbase ionic liquid composites, Ni-MOF/Ionic Liquid (IL) hybrids, fluorinated covalent organic frameworks with ion-pair functional groups, defect-engineered UiO-66, and a validated kinetic model for humid-condition operation, achieving CO₂ capacities up to 1.86 mmol/g at 400 ppm with excellent cycling stability. For H₂-free conversion, we constructed atomically synergistic Zn–O–Cr binuclear catalytic sites that achieve 100% ethylene selectivity, ~9.6% ethane conversion, and 99% CO₂ utilization in equimolar co-conversion of ethane and CO₂. We further demonstrated downstream valorization pathways converting CO and C₂H₄ into polyketones and C₃ chemicals. These advances strengthen the scientific foundation for producing value-added materials from ambient CO₂.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatiotemporal Coherence of Mean and Extreme Aerosol Particle Events over Eastern North America as Observed from Satellite

Quantifying spatiotemporal scales of coherence and variability of aerosol particle properties provides (i) metrics for evaluating observational data sets and model simulations, (ii) inferences regarding dominant causes of variability, and (iii) information that is necessary to determine their climate forcing and air quality impacts. Accordingly, analyses of columnar aerosol optical depth (AOD) and Ångstrom exponent (AE) from the MODerate resolution Imaging Spectroradiometer (MODIS) on the Aqua and Terra satellites, and AErosol RObotic NETwork (AERONET) stations are used to evaluate the spatially averaged (Level-3) MODIS products, and to characterize the spatiotemporal scales of variability (and coherence) of aerosol particles over eastern North America (2000-2013). Results show a high degree of consistency in AOD retrievals from the different data sets but larger discrepancies in AE estimates, highest mean AOD and lowest day-to-day variability during the summer, and largest scales of spatial coherence in summer and fall. Consistent with the scales of spatial coherence from MODIS data, in both data sets power spectra indicate AOD variability is manifest primarily on synoptic and annual time scales. Conversely, AE variability in MODIS data is primarily focused on seasonal, semiannual, and annual time scales, and there is an additional mode of AE variability at approx. 30 days in the AERONET measurements. The frequency of cooccurrence of extreme AOD values (>local 90th percentile) decreases to below 50% at approx. 150 km from a central grid cell, but is above that expected by random chance over almost all of eastern North America, indicating supra-regional scale extreme events.

MODIS↗

Coherent control of frequency conversion toward short (picosecond) vacuum-ultraviolet radiation pulses

We present experimental data on the coherent control of frequency conversion toward the vacuum-ultraviolet regime in xenon atoms, applying intense ultrashort picoseconds (ps) radiation pulses. We report on quantum interference between two resonantly enhanced frequency conversion processes (i.e., fifth harmonic generation and four-wave mixing). The conversion processes are driven by a fundamental (ps) laser pulse at 530 nm and the phase-locked second harmonic at 265 nm. Both fifth harmonic generation and four-wave mixing yield vacuum-ultraviolet radiation at 106 nm. The two frequency conversion pathways interfere with each other - either constructively or destructively, depending on the relative phase of the driving laser pulses. Thus, by variation of the relative phase, we substantially enhance or reduce the conversion efficiency (i.e., the yield of generated vacuum-ultraviolet radiation).

74 ATOMIC AND MOLECULAR PHYSICS↗