Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computing continuum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Iterative solution techniques in boundary element analysis

Iterative techniques for the solution of the algebraic equations associated with the direct boundary element analysis (BEA) method are discussed. Continuum structural response analysis problems are considered, employing single- and multizone boundary element models with and without zone condensation. The impact on convergence rate and computer resource requirements associated with the sparse and blocked matrices, resulting in multizone BEA, is studied. Both conjugate gradient and generalized minimum residual preconditioned iterative solvers are applied for these problems and the performance of these algorithms is reported. Included is a quantification of the impact of the preconditioning utilized to render the boundary element matrices solvable by the respective iterative methods in a time competitive with direct methods.

Kane, J. H.↗
NASA NTRS2000

A Model for Removing Fringes from STIS Slitless Spectra

We have developed a model that allows us to defringe slitless 2-dimensional spectra taken with the Space Telescope Imaging Spectrograph (STIS). Like all thin chip CCDs used in astronomy, the STIS CCD detector acts like an interferometer in the presence of monochromatic light, producing bright and dark fringes where there is constructive and destructive interference. These fringes are especially troublesome for spectra in the near-IR (> 7000A), reaching a peak amplitude of about 20% near 9500 A. Removing fringes from STIS spectra taken with a slit is simply a matter of dividing by an appropriate "fringe flat". A suitable flat is obtained by observing a continuum calibration source through the same slit. This however is not possible for slitless spectra, whose wavelength mapping onto the CCD detector varies with position of the object in the field. Beginning with an approximate knowledge of the STIS CCD structure, we have used 50 continuum source spectral flats taken at various central wavelengths to constrain the thickness of the detection layer at each pixel. Rom this result, we can compute a fringe flat for any astronomical source, no matter how it is positioned in the field. Flats made by this method reduce the fringing amplitude in astronomical spectra by a factor of about 5. The model fringe flat is a function of the index of refraction of each of four layers in the CCD, the thickness of each layer, and the wavelength of the light hitting each pixel. We show how the CCD structural parameters are incorporated into this "fitting function", and describe the procedure used to solve for the free parameters (the thickness of each layer at each pixel). The effectiveness of this technique will be demonstrated using slitless spectra taken as part of the STIS parallel program.

Malumuth, E.M.↗
NASA NTRS1987

Frequency optimization of repetitive lattice beam-like structures using a continuum model

A new method for obtaining the maximum frequency design of a beam-like repetitive lattice structure is presented. Using existing techniques, the lattice is first modeled as an equivalent anisotropic Timoshenko beam. The computation of the stiffness and inertial properties of the beam, determined by matching the strain and kinetic energies of the beam with those of the lattice, is facilitated by the repetitive nature of the lattice. The optimum design is obtained by maximizing Rayleigh's quotient using methods of variational calculus. For the problem selected, results show excellent agreement with those obtained by traditional finite-element methods. Moreover, unlike FE methods, cpu time is relatively unaffected by the size of the truss.

Reiss, Robert↗
DOE OSTI2023

Implementation of extrinsic cohesive zone model (ECZM) in 2D finite-discrete element method (FDEM) using node binding scheme

The combined finite-discrete element method (FDEM) has been widely used for rock fracturing simulations. Conventionally, FDEM is realized using the intrinsic cohesive zone model (ICZM); however, it has the drawback of artificial compliance and high computational expense. As a complement, the extrinsic cohesive zone model (ECZM) is seen to be realized in FDEM recently, whereas the node splitting scheme utilized is cumbersome. Here, within the framework of ICZM-based FDEM, we propose a node binding scheme to efficiently bind the pre-discretized finite elements and thus guarantee the continuum behavior of materials in the elastic stage. The yield surfaces, controlled by ECZM, are dynamically embedded by invoking the pre-inserted cohesive elements. The effectiveness and efficiency of the proposed approach are validated and tested by performing a suite of numerical experiments. Compared with ICZM-based FDEM, the proposed approach can correctly capture material deformation and reduce the computation cost. In contrast to the existing ECZM-based FDEM, the proposed approach can overcome the frequent and complex element topology updating. Finally, this work provides a novel perspective that fully inherits the advantages of both ICZM and ECZM, but circumvents their shortcomings, which guarantees a more efficient and effective simulation of brittle material evolution from continuum to discontinuum.

58 GEOSCIENCES↗
DOE OSTI2023

Towards a unified nonlocal, peridynamics framework for the coarse-graining of molecular dynamics data with fractures

Molecular dynamics (MD) has served as a powerful tool for designing materials with reduced reliance on laboratory testing. However, the use of MD directly to treat the deformation and failure of materials at the mesoscale is still largely beyond reach. In this work, we propose a learning framework to extract a peridynamics model as a mesoscale continuum surrogate from MD simulated material fracture data sets. Firstly, we develop a novel coarse-graining method, to automatically handle the material fracture and its corresponding discontinuities in the MD displacement data sets. Inspired by the weighted essentially non-oscillatory (WENO) scheme, the key idea lies at an adaptive procedure to automatically choose the locally smoothest stencil, then reconstruct the coarse-grained material displacement field as the piecewise smooth solutions containing discontinuities. Then, based on the coarse-grained MD data, a two-phase optimization-based learning approach is proposed to infer the optimal peridynamics model with damage criterion. In the first phase, we identify the optimal nonlocal kernel function from the data sets without material damage to capture the material stiffness properties. Then, in the second phase, the material damage criterion is learnt as a smoothed step function from the data with fractures. As a result, a peridynamics surrogate is obtained. As a continuum model, our peridynamics surrogate model can be employed in further prediction tasks with different grid resolutions from training, and hence allows for substantial reductions in computational cost compared with MD. We illustrate the efficacy of the proposed approach with several numerical tests for the dynamic crack propagation problem in a single-layer graphene. Our tests show that the proposed data-driven model is robust and generalizable, in the sense that it is capable of modeling the initialization and growth of fractures under discretization and loading settings that are different from the ones used during training.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Solvent and Temperature Effects on Photoinduced Proton-Coupled Electron Transfer in the Marcus Inverted Region

Concerted proton-coupled electron transfer (PCET) in the Marcus inverted region was recently demonstrated. Understanding the requirements for such reactivity is fundamentally important and holds promise as a design principle for solar energy conversion systems. Herein, we investigate the solvent polarity and temperature dependence of photoinduced proton-coupled charge separation (CS) and charge recombination (CR) in anthracene–phenol–pyridine triads: 1 (10-(4-hydroxy-3-(4-methylpyridin-2-yl)benzyl)anthracene-9-carbonitrile) and 2 (10-(4-hydroxy-3-(4-methoxypyridin-2-yl)benzyl)anthracene-9-carbonitrile). Both the CS and CR rate constants increased with increasing polarity in acetonitrile:n-butyronitrile mixtures. The kinetics were semi-quantitatively analyzed where changes in dielectric and refractive index, and thus consequently changes in driving force (–ΔG°) and reorganization energy (λ), were accounted for. The results were further validated by fitting the temperature dependence, from 180 to 298 K, in n-butyronitrile. The analyses support previous computational work where transitions to proton vibrational excited states dominate the CR reaction with a distinct activation free energy (ΔG* CR ~ 140 meV). However, the solvent continuum model fails to accurately describe the changes in ΔG° and λ with temperature via changes in dielectric constant and refractive index. Satisfactory modeling was obtained using the results of a molecular solvent model, which predicts that λ decreases with temperature, opposite to that of the continuum model. To further assess the solvent polarity control in the inverted region, the reactions were studied in toluene. Nonpolar solvents decrease both ΔG° CR and λ, slowing CR into the nanosecond time regime for 2 in toluene at 298 K. This demonstrates how PCET in the inverted region may be controlled to potentially use proton-coupled CS states for efficient solar fuel production and photoredox catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Multimode Metastructures: Novel Hybrid 3D Lattice Topologies

With the rapid proliferation of additive manufacturing and 3D printing technologies, architected cellular solids including truss-like 3D lattice topologies offer the opportunity to program the effective material response through topological design at the mesoscale. The present report summarizes several of the key findings from a 3-year Laboratory Directed Research and Development Program. The program set out to explore novel lattice topologies that can be designed to control, redirect, or dissipate energy from one or multiple insult environments relevant to Sandia missions, including crush, shock/impact, vibration, thermal, etc. In the first 4 sections, we document four novel lattice topologies stemming from this study: coulombic lattices, multi-morphology lattices, interpenetrating lattices, and pore-modified gyroid cellular solids, each with unique properties that had not been achieved by existing cellular/lattice metamaterials. The fifth section explores how unintentional lattice imperfections stemming from the manufacturing process, primarily sur face roughness in the case of laser powder bed fusion, serve to cause stochastic response but that in some cases such as elastic response the stochastic behavior is homogenized through the adoption of lattices. In the sixth section we explore a novel neural network screening process that allows such stocastic variability to be predicted. In the last three sections, we explore considerations of computational design of lattices. Specifically, in section 7 using a novel generative optimization scheme to design novel pareto-optimal lattices for multi-objective environments. In section 8, we use computational design to optimize a metallic lattice structure to absorb impact energy for a 1000 ft/s impact. And in section 9, we develop a modified micromorphic continuum model to solve wave propagation problems in lattices efficiently.

36 MATERIALS SCIENCE↗
NASA NTRS1973

The inference of atmospheric ozone using satellite nadir measurements in the 1042/cm band

A description and detailed analysis of a technique for inferring atmospheric ozone information from satellite nadir measurements in the 1042 cm band are presented. A method is formulated for computing the emission from the lower boundary under the satellite which circumvents the difficult analytical problems caused by the presence of atmospheric clouds and the watervapor continuum absorption. The inversion equations are expanded in terms of the eigenvectors and eigenvalues of a least-squares-solution matrix, and an analysis is performed to determine the information content of the radiance measurements. Under favorable conditions there are only two pieces of independent information available from the measurements: (1) the total ozone and (2) the altitude of the primary maximum in the ozone profile.

Russell, J. M., III↗
NASA NTRS1977

Preliminary development of a fundamental analysis model for crack growth in a fiber reinforced composite material

A mathematical model for the strength of fiber reinforced composites containing specific flaws is described. The approach is to embed a local heterogeneous region surrounding the crack tip in an anisotropic elastic continuum. By consideration of the individual failure events activated near the flaw tip, a strength prediction can be made from basic properties of the composite constituents. Computations for arbitrary flaw size and orientation have been performed for unidirectional composites with linear elastic-brittle constituent behavior. The mechanical properties were those of graphite epoxy. With the rupture properties arbitrarily varied to test the capability of the model to reflect real fracture modes in fiber composites, it is shown that fiber breakage, matrix crazing, crack bridging, matrix-fiber debonding, and axial splitting all can occur during gradually increasing load prior to catastrophic fracture. Qualitative comparisons with experimental results on edge-notched unidirectional graphite epoxy specimens have also been made.

Kanninen, M. F.↗
NASA NTRS1985

Grid-free simulation of diffusion using random walk methods

The simulation of the diffusion of a continuum field by the random walk (RW) displacement of a set of particles is considered. Elements of the gradients of the diffusive concentration are transported by computational particles. It is demonstrated that, by the use of concentration gradients in the RW process, statistical errors are reduced and each realization of the numerical solution is a representation of the exact solution. The algorithm is grid-free, and the computational elements move to follow the gradients; hence, the algorithm is self-adaptive, and uniform resolution is achieved for all times.

Ghoniem, A. F.↗
NASA NTRS1986

The X-ray spectrum of SN 1006

The supernova (SN) of A.D. 1006 represents the brightest in recorded history. The X-ray observations of its remnant appear to be full of puzzles. The present paper has the objective to reevaluate published X-ray data on SN 1006, using detailed nonequilibrium spectral computations and a self-consistent hydrodynamic SNR model. In a summary of the main conclusions, it is pointed out that an observed power-law continuum can be understood as mainly free-free emission from a reverse shock into SN ejecta with an initially uniform density profile. The spectral index is correctly predicted by such a model. Most of the continuum is produced by fully ionized gas in the dense outer layers of ejecta. The X-ray spectrum is not consistent with a solar composition or a uniform composition but is consistent with a layered composition of ejecta containing carbon on the outside, and processed heavy elements on the inside. There is no difficulty in including a large mass of iron.

Hamilton, A. J. S.↗
NASA NTRS1997

Aerodynamics of Stardust Sample Return Capsule

Successful return of interstellar dust and cometary material by the Stardust Sample Return Capsule requires an accurate description of the Earth entry vehicle's aerodynamics. This description must span the hypersonic-rarefied, hypersonic-continuum, supersonic, transonic, and subsonic flow regimes. Data from numerous sources are compiled to accomplish this objective. These include Direct Simulation Monte Carlo analyses, thermochemical nonequilibrium computational fluid dynamics, transonic computational fluid dynamics, existing wind tunnel data, and new wind tunnel data. Four observations are highlighted: 1) a static instability is revealed in the free-molecular and early transitional-flow regime due to aft location of the vehicle s center-of-gravity, 2) the aerodynamics across the hypersonic regime are compared with the Newtonian flow approximation and a correlation between the accuracy of the Newtonian flow assumption and the sonic line position is noted, 3) the primary effect of shape change due to ablation is shown to be a reduction in drag, and 4) a subsonic dynamic instability is revealed which will necessitate either a change in the vehicle s center-of-gravity location or the use of a stabilizing drogue parachute.

Mitcheltree, R. A.↗
NASA NTRS2017

Modeling for Battery Prognostics

For any battery-powered vehicles (be it unmanned aerial vehicles, small passenger aircraft, or assets in exoplanetary operations) to operate at maximum efficiency and reliability, it is critical to monitor battery health as well performance and to predict end of discharge (EOD) and end of useful life (EOL). To fulfil these needs, it is important to capture the battery's inherent characteristics as well as operational knowledge in the form of models that can be used by monitoring, diagnostic, and prognostic algorithms. Several battery modeling methodologies have been developed in last few years as the understanding of underlying electrochemical mechanics has been advancing. The models can generally be classified as empirical models, electrochemical engineering models, multi-physics models, and molecular/atomist. Empirical models are based on fitting certain functions to past experimental data, without making use of any physicochemical principles. Electrical circuit equivalent models are an example of such empirical models. Electrochemical engineering models are typically continuum models that include electrochemical kinetics and transport phenomena. Each model has its advantages and disadvantages. The former type of model has the advantage of being computationally efficient, but has limited accuracy and robustness, due to the approximations used in developed model, and as a result of such approximations, cannot represent aging well. The latter type of model has the advantage of being very accurate, but is often computationally inefficient, having to solve complex sets of partial differential equations, and thus not suited well for online prognostic applications. In addition both multi-physics and atomist models are computationally expensive hence are even less suited to online application An electrochemistry-based model of Li-ion batteries has been developed, that captures crucial electrochemical processes, captures effects of aging, is computationally efficient, and is of suitable accuracy for reliable EOD prediction in a variety of operational profiles. The model can be considered an electrochemical engineering model, but unlike most such models found in the literature, certain approximations are done that allow to retain computational efficiency for online implementation of the model. Although the focus here is on Li-ion batteries, the model is quite general and can be applied to different chemistries through a change of model parameter values. Progress on model development, providing model validation results and EOD prediction results is being presented.

Prognostics↗
DOE OSTI2026

$B \to π$, $B_{(s)} \to D_{(s)}$ from 2+1+1 Flavor Lattice QCD

We present a lattice-QCD calculation of the hadronic form factors for $B$-meson semileptonic decays computed using the highly improved staggered quark action for both valence and sea quarks on the MILC collaborations 2+1+1-flavor ensembles with lattice spacing ranging from 0.09 fm to 0.03 fm, many with physical pion masses On our finest ensembles, we compute the form factors directly at the physical $b$-quark mass. We discuss the computational setup and analysis strategies for two- and three-point correlation functions. For $B_{(s)} \to D_{(s)}$ we present preliminary results of chiral-continuum fits for the scalar and vector form factors. The goal of this project is a percent-level determination of the scalar and vector form factors to enable high-precision determinations of $|V_{ub}|$ and $|V_{cb}|$. This work fits into a broader program of lattice-QCD studies of weak $B$-meson decays by the Fermilab Lattice and MILC Collaborations.

Cassar, Nicholas [Colorado State U.]↗
DOE OSTI2020

(U) PRAD0697 & PRAD0698: Complex Loading of CeO₂ Powder

Cerium(IV) oxide (CeO₂) powder is shock compressed using the Precision High Energy-density Liner Implosion eXperiment (PHELIX) platform. Experimental results are compared against several modeling approaches. Compaction behavior is best captured with a P-∝ model, which calculates CeO₂ powder bulk densities within 80-99% of experimental values but overpredicts densi cation at the cylindrical target's outer radius and center by up to 20%. Preliminary calculations suggest that accuracy could be increased with the inclusion of a coupled strength model. Several common computational modeling approaches for the shock compression response of granular materials and the magnetohydrodynamic (MHD) force upon the impactor/liner in pulsed power compression experiments are investigated and analyzed for their validity. The Bi-linear Ramp, P-∝ PACXP, and P-∝ Menikoff-Kober continuum compaction models are calibrated to planar impact Hugoniot data for CeO₂ powder and used to predict the powder's shock compaction response under non-planar shock wave compression. MHD calculations of the PHELIX pulsed power driver are performed using an idealized resistor-inductor-capacitor (RLC) circuit calibrated to previous experiments. All simulations are performed using the LANL code FLAG. Two validation experiments are computationally designed using the calibrated compaction and circuit models, executed using the PHELIX platform on CeO₂ targets with initial porous densities of 3.95 and 4.03 g/cm³, measured with proton radiography, and analyzed against the model predictions. The two P-∝ models more accurately describe CeO₂ powder densi cation than the Bi-linear Ramp model. However, the two P-∝ models overpredict bulk density of the shock compressed CeO₂ powder by up to 20% when the appropriate impact velocities are applied. MHD calculations for both validation experiments underpredict liner impact velocities by 4-11% when using the idealized RLC circuit model calibrated to previous experiments. Compensating underpredictions of impact velocity and overpredictions of powder densication lead to a false accuracy in pre-shot calculations compared to experimental data. To improve correlation between simulations and experiments, the following improvements are suggested: 1. A coupled strength model for CeO₂ powder that updates strength as a function of porosity and applied stress. 2. An improved MHD circuit model that more accurately captures the PHELIX machine.

36 MATERIALS SCIENCE↗
NASA NTRS1988

The computation of radiation from nonequilibrium hypersonic flows

The results of the solution of the equations that describe a hypersonic ionized flow about an elliptically blunted cone are presented. The flow conditions correspond to those of the proposed Aeroassist Flight Experiment (AFE) vehicle at altitudes between the perigee at 78 km and the approximate limit of the continuum regime at 90 km. For the free-stream velocities of interest, about 9 km/sec, the flowfield is out of thermo-chemical equilibrium, electronically excited, ionized and radiating. The gas consists of eight-chemical species including free electrons. The thermal state of the gas is modeled with a translational-rotational temperature, four vibrational temperatures for the diatomic species and an electron-electronic temperature. The electronic excitation of molecules is included. The nonequilibrium air radiation from each fluid element is computed and the radiative heat flux at the body surface is determined. The stagnation point radiative heating result agrees with previous calculations.

Candler, Graham↗
NASA NTRS1993

Simulated rarefied entry of the Galileo probe into the atmosphere of Jupiter

Flow properties and aerodynamics are computed with a direct simulation Monte Carlo (DSMC) method for rarefied entry of the Galileo Probe into the atmosphere of Jupiter. Accurate predictions of vehicle drag coefficients are needed in order to assess atmospheric properties from the onboard Atmosphere Structure Experiment where highly-sensitive accelerometers will measure the drag force to within 10-6 barr during the initial entry phase at high altitudes. The corresponding flow rarefraction extends from the free molecule limit to the near continuum transition regime (Re less than 1000). Simulation results indicate that C(sub D) varies from 2.1 at the free molecule limit down to 1.6 at Re(infinity) = 1,000. Temperatures, densities, and internal energies throughout the flow field were also computed at each altitude ranging from 735 km to 353 km above the 1 barr level in the Jovian atmosphere. Surface heating and temperatures of the probe were computed directly in the DSMC code by assuming radiative equilibrium. Material response was re-asssessed accurately during entry by accounting for conductivity, heat capacity, and pyrolysis which led to surface material mass efflux several times that of the freestream mass influx. The simulation also accounted for the quantum nature of the rotational energy mode of the dominant atmospheric species H2 through partial internal excitation in the freestream gas.

Hass, Brian L.↗
NASA NTRS2010

A Geometric Approach to Modeling Microstructurally Small Fatigue Crack Formation: Simulation and Prediction of Crack Nucleation in AA 7075-T651 - 2

The objective of this paper is to develop further a framework for computationally modeling microstructurally small fatigue crack growth in AA 7075-T651 [1]. The focus is on the nucleation event, when a crack extends from within a second-phase particle into a surrounding grain, since this has been observed to be an initiating mechanism for fatigue crack growth in this alloy. It is hypothesized that nucleation can be predicted by computing a non-local nucleation metric near the crack front. The hypothesis is tested by employing a combination of experimentation and nite element modeling in which various slip-based and energy-based nucleation metrics are tested for validity, where each metric is derived from a continuum crystal plasticity formulation. To investigate each metric, a non-local procedure is developed for the calculation of nucleation metrics in the neighborhood of a crack front. Initially, an idealized baseline model consisting of a single grain containing a semi-ellipsoidal surface particle is studied to investigate the dependence of each nucleation metric on lattice orientation, number of load cycles, and non-local regularization method. This is followed by a comparison of experimental observations and computational results for microstructural models constructed by replicating the observed microstructural geometry near second-phase particles in fatigue specimens. It is found that orientation strongly influences the direction of slip localization and, as a result, in uences the nucleation mechanism. Also, the baseline models, replication models, and past experimental observation consistently suggest that a set of particular grain orientations is most likely to nucleate fatigue cracks. It is found that a continuum crystal plasticity model and a non-local nucleation metric can be used to predict the nucleation event in AA 7075-T651. However, nucleation metric threshold values that correspond to various nucleation governing mechanisms must be calibrated.

Hochhalter, Jake D.↗