Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparative Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

A comparative study of two-electron systems with screened Coulomb potentials

Highlights: • A comparison criterion for screened potentials is conjectured for two-electron atoms. • The limits of validity of the correlation hypothesis are discussed. • Independent Hylleraas and Lagrange mesh calculations verify the comparison criterion. - Abstract: The relative ordering of energy levels is investigated for bound two-electron systems with potentials of the form V(r{sub 1},r{sub 2},r{sub 12})=Z(v(r{sub 1})+v(r{sub 2}))-v(r{sub 12}). Given the two one-body binding potentials v{sup (1)}(r) and v{sup (2)}(r), it is argued that if f(r)≡v{sup (1)}(r)-v{sup (2)}(r) is positive and monotonically decreasing upon increasing r then the corresponding eigenvalues of the two-electron Hamiltonians H{sub i}=-(1/2)(∇{sub 1}{sup 2}+∇{sub 2}{sup 2})+Z(v{sup (i)}(r{sub 1})+v{sup (i)}(r{sub 2}))-v{sup (i)}(r{sub 12}) , i=1,2are highly likely to be pairwise ordered, i.e., E{sub n}{sup (1)}≥E{sub n}{sup (2)}, n=1,2,…, where E{sub 1}{sup (i)}≤E{sub 2}{sup (i)}≤⋯≤E{sub k}{sup (i)}≤⋯ , for both i=1 and i=2. This conjecture certainly holds at sufficiently large Z. The range of n may be finite or infinite, depending on the nature of the potentials. In fact, the range of values of n for v{sup (1)}(r) may be shorter than that of v{sup (2)}(r) (which is more binding). The one-electron potentials specifically considered are: v(r)={ v_C(r) =-(1/r) Coulomb v_D(r) =-(1/r)exp(-λr) Debye (Yukawa) v_H_u(r) =-(λ/(exp(λr)-1)) Hulthén v_E_C_S_C(r) =-(1/r)exp(-λr)cos(λr) ECSC}{sup ∗} , ){sup ∗}Exponential-Cosine-Screened-Coulomb where λ is the screening parameter. For each of the λ-dependent potentials we compare one- and two-electron spectra corresponding to distinct values of λ. This is followed by pairwise comparison of distinct potentials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Magnetic Resonance Imaging–Guided versus Surrogate-Based Motion Tracking in Liver Radiation Therapy: A Prospective Comparative Study

Purpose: This study applied automatic feature detection on cine–magnetic resonance imaging (MRI) liver images in order to provide a prospective comparison between MRI-guided and surrogate-based tracking methods for motion-compensated liver radiation therapy. Methods and Materials: In a population of 30 subjects (5 volunteers plus 25 patients), 2 oblique sagittal slices were acquired across the liver at high temporal resolution. An algorithm based on scale invariant feature transform (SIFT) was used to extract and track multiple features throughout the image sequence. The position of abdominal markers was also measured directly from the image series, and the internal motion of each feature was quantified through multiparametric analysis. Surrogate-based tumor tracking with a state-of-the-art external/internal correlation model was simulated. The geometrical tracking error was measured, and its correlation with external motion parameters was also investigated. Finally, the potential gain in tracking accuracy relying on MRI guidance was quantified as a function of the maximum allowed tracking error. Results: An average of 45 features was extracted for each subject across the whole liver. The multi-parametric motion analysis reported relevant inter- and intrasubject variability, highlighting the value of patient-specific and spatially-distributed measurements. Surrogate-based tracking errors (relative to the motion amplitude) were were in the range 7% to 23% (1.02-3.57mm) and were significantly influenced by external motion parameters. The gain of MRI guidance compared to surrogate-based motion tracking was larger than 30% in 50% of the subjects when considering a 1.5-mm tracking error tolerance. Conclusions: Automatic feature detection applied to cine-MRI allows detailed liver motion description to be obtained. Such information was used to quantify the performance of surrogate-based tracking methods and to provide a prospective comparison with respect to MRI-guided radiation therapy, which could support the definition of patient-specific optimal treatment strategies.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2015

A comparative study about electronic structures at rubrene/Ag and Ag/rubrene interfaces

The contact between the electrode and the organic semiconductor is one of the most crucial factors in determining the organic device performance. The development and production technology of different organic devices require the understanding of different types of metal/organic semiconducting thin film interfaces. Comparisons about the electronic structures at Rubrene/Ag and Ag/Rubrene interfaces have been studied using photoemission spectroscopy. The Ag on rubrene interfaces is found to show more interesting and complex natures than its counterpart. The vacuum level (VL) was shifted about 0.51 eV from push back effect for deposition of 5 Å rubrene onto Ag film whereas the electronic features of silver was only suppressed and no energy shift was resulted. While the deposition of 5 Å Ag onto rubrene film leads to the diffusion of the Ag atoms, as a cluster with quantum size effect, inside the film. Angle dependent XPS measurement indicates that diffused metal clusters were present at entire probed depth of the film. Moreover these clusters dope the uppermost surface of the rubrene film which consequences a shift of the electronic states of thick organic film towards higher binding energy. The VL was found to shift about 0.31 eV toward higher binding energy whereas the shift was around 0.21 eV for the electronic states of rubrene layer.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Electron beam irradiation effects on bulk metals: a comparative study of polycrystalline versus single-crystalline structures

This study investigates the effects of electron beam (e-beam) irradiation on the mechanical and structural properties of eight bulk metallic samples, comprising both polycrystalline (PC) and single-crystalline (SC) forms of Ni, Cr, V, and Ti. These metals were evaluated as potential candidates for beam exit windows in high-power (MW-class) particle accelerators. The primary objective is to identify metals capable of withstanding the conditions of high-power/MW-class e-beam accelerators and serve effectively as exit windows. Selection criteria were based on each metal’s intrinsic properties, power dissipation capability, and irradiation-induced changes in mechanical behavior, including hardness, elastic modulus, and defect density. Comprehensive characterization was conducted using field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and nanoindentation, performed both before and after exposure to a ~¿66 kGy dose from a 10 MeV e-beam accelerator. Results revealed that e-beam irradiation induced hardening in PC Ni, whereas PC Ti, commonly used in beam exit windows, exhibited softening. The observed softening in PC Ti is attributed to grain coarsening, elongation, and the formation of twins and twin boundaries, in contrast to the smaller, compressed grains in the pristine (Pr) PC Ti samples, consistent with the Hall–Petch relationship. The stresses due to twinning are small and insignificant in influencing the overall hardening of the PC Ti irradiated sample when compared to the stresses due to the dislocation density. Conversely, SC Ti samples exhibited irradiation-induced hardening. The SC Ti irradiated samples developed additional irradiation-induced modifications in crystallographic texture of (100), (101), (110), (200), (112), (004), and (211) as evidenced from the XRD results, which could probably explain the hardening effect that is caused by irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Experimental Investigations to Enhance the Tribological Performance of Engine Oil by Using Nano-Boric Acid and Functionalized Multiwalled Carbon Nanotubes: A Comparative Study to Assess Wear in Bronze Alloy

In various mechanical systems, lubricants are generally used to reduce friction and wear; thus, the total energy loss in the mechanical systems can be minimized by the proper enhancement of lubrication properties. In general, friction modifiers and antiwear additives are used to improve the tribological properties of the lubricant. However, the use of these additives has to be phased out due to their fast chemical degradation in their applications and other environmental issues. In recent years, the use of nanoparticles as a potential lubricant additive has received considerable attention because of its excellent mechanical and tribological characteristics. The present work describes the tribological behavior of nano-boric acid, multiwalled carbon nanotubes (MWCNTs), and functionalized multiwalled carbon nanotubes (FMWCNTs) modified with carboxylic acid. These nanoparticles were used to enhance the tribological properties of engine oil (SAE20W40) used to lubricate bronze alloy samples. The performance of these nano-coolants was assessed on a linear reciprocating ball-on-flat tribometer. Results highlight the friction and wear behavior of the nano-boric acid, MWCNTs, and FMWCNTs under three varying parameters such as the effect of nanoparticles concentration, load-carrying capacity, and sliding speed. The addition of nano-boric acid, MWCNTs, and FMWCNTs has significantly improved the tribological properties of the base lubricant. The addition of 0.5 wt.% of nano-boric acid, MWCNTs, and FMWCNTs to the base lubricant has decreased the coefficient of friction by 19.76, 30.55, and 35.65%, respectively, and a significant reduction in wear volume by 55.17, 71.42, and 88.97% was obtained in comparison with base lubricant.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Comprehensive Comparative Study of Active Learning Schemes for Nanophotonics Design

We present a benchmarking study of active learning (AL) schemes for designing planar multilayer nanophotonic metamaterials, where the design tasks are formulated as binary optimization problems. Different surrogate models, including factorization machine (FM), Gaussian process regression (GPR), and convolutional neural network (CNN), combined with different optimization methods, including exhaustive enumeration, discrete particle swarm optimization (DPSO), quantum annealing (QA), hybrid QA, and simulated annealing are studied. The benchmark cases investigated range from small problems with short binary lengths (N = 25) to large problems with N up to 100, focusing on the design of two classes of photonic structures, including antireflective coatings for the long-wavelength infrared region and transparent radiative coolers. For small problems, CNN coupled with DPSO in AL achieves the best performance. As N increases, FM with QA outperforms GPR and CNN. For FM-based AL, hybrid QA yields the best optimization results, particularly in high-dimensional cases (N = 100). These results demonstrate that the optimization method can significantly affect in AL performance as N increases, and that QA-based optimization can provide practical routes for mitigating the optimization bottleneck in high-dimensional problems.

Jung, Serang [Kyung Hee University, Korea]↗
DOE OSTI2025

Comparative Study of Solvatomorphs of Stryker's Reagent Using MicroED and Quantum Mechanics

Abstract The atomic position of hydrogen atoms in metal hydrides has been a long‐standing structural question in inorganic chemistry given that hydride delivery is integral to diverse chemical reactions. Microcrystal electron diffraction (microED), with it's increased sensitivity toward hydrogen atoms relative to X‐ray diffraction, offers a potential path to addressing this challenge. Herein, the first microED study of Stryker's reagent is reported, resulting in the structure of a new benzene solvate. Improved accuracy for hydrogen atom positions was obtained via a quantum crystallography (QCr) approach, Hirshfeld atom refinement (HAR). Structural and topological analysis supports edge bridging hydrides in the microED structure of a THF solvate form, consistent with previous diffraction studies. Interestingly, analysis of a new benzene solvate, discovered in this study, is consistent with mixed edge‐ and face‐bridging hydrides.

Jha, Kunal K. [Division of Chemistry &amp, Chemica↗
DOE OSTI2015

Comparative Study and Accommodation of Biodiesel in Diesel‐Electric Hybrid Vehicles Coupled with Aftertreatment Systems

Abstract Biodiesel is a promising renewable alternative fuel, which can be used in diesel‐electric hybrid vehicles to potentially bring one kind of clean vehicle on the road. However, the fuel property variation can cause impacts to the powertrain and aftertreatment systems. In this paper, biodiesel's influence on post‐injection effects is studied. Experimental results are obtained to demonstrate the differences between diesel and biodiesel, and to build up fuel‐dependent maps of engine torque, temperature, and emissions. Utilizing those maps, an aftertreatment warm‐up approach compatible with both fuels is developed by strategically enabling double post injections. Finally, a supervisory controller based on model predictive control method is designed to optimize and balance the tradeoff between hybrid vehicle fuel economy and tailpipe emissions. Simulations are conducted for both fuels with or without the proposed control strategy. The validation results show that for both fuels, the controller can significantly reduce tailpipe emissions by successfully regulating the catalyst temperature to the desired range sacrificing fuel economy. And for biodiesel, additional fuel cost is required in order to realize the tradeoff.

Zhao, Junfeng↗
DOE OSTI2026

A Comparative Study of Ethanol Upgrading to Butadiene Over Rare Earth Elements Incorporated in Dealuminated Beta Zeolites

Copper and rare earth element-containing dealuminated Beta zeolites (CuREE/deAlBeta) are promising catalysts for the conversion of ethanol to C 3+ olefins en route to sustainable aviation fuel. Product selectivities over CuREE/deAlBeta depend on the identity of the REE. Here, in this study, a suite of La/deAlBeta catalysts of varied La loading are prepared, and their reactivities, selectivities, and apparent C-C coupling kinetics in the cascade reaction between ethanol and acetaldehyde are reported. Ex situ and in situ titrations to quantify Lewis acidic La sites quantify distinct numbers of sites, suggesting a distribution of site types. Across a series of REE/deAlBeta catalysts (REE = Y, La, Lu, Yb, Gd), the selectivity to secondary products correlates with the pyridine heats of adsorption at REE Lewis acid sites. The turnover frequency (per Lewis acid site) for C–C coupling was similar across the series of REE/deAlBeta catalysts. Y/deAlBeta and La/deAlBeta, which have the most disparate secondary product selectivities, had similar kinetics for C–C coupling. These findings demonstrate the complexity of quantifying active sites in REE/deAlBeta zeolites, and the sensitivity of the selectivity, but not the reactivity for C–C coupling, to the identity of the REE atom in REE/deAlBeta zeolites.

alcohol upgrading↗
DOE OSTI2020

Comparative study on the novel umami‐active peptides of the whole soybeans and the defatted soybeans fermented soy sauce

Abstract BACKGROUND Two kinds of soy sauce produced via fermentation of the whole soybeans and the defatted soybeans (soy sauce termed ‘SSS’ and ‘SSD’, respectively) were subjected to the treatment using aqueous ethanol solutions with high concentrations. Then tasty peptides were separated from SSS and SSD by sensory guided fractionation, using macroporous resin and reverse‐phase high‐performance liquid chromatography (RP‐HPLC), and identified by ultra‐performance liquid chromatography quadrupole time‐of‐flight tandem mass spectrometry (UPLC‐Q‐TOF‐MS/MS). Results The result showed that umami‐active fractions and ≤ 3 kDa peptides were mainly concentrated in the supernatants resulted from the treatment with 60% ethanol and the precipitates resulted from the treatment with 80% ethanol. The contents of ammonia nitrogen, non‐salt solids, bitter amino acids, amino acids in peptides and the proportion of ≤ 3 kDa peptides in SSS were higher than those in SSD. Sixteen and fourteen tasty peptides were separated from SSS and SSD, among them five dipeptides (γ‐Glu‐Glu, Glu‐Glu, γ‐Glu‐Cys, γ‐Glu‐Leu, Glu‐Leu and Ile‐Glu) with a glutamic acid residue were identified both in SSS and SSD, which have been reported as umami/kokumi‐active peptides in soy sauce. Several peptides identified from SSS (Thr‐Gly‐Cys, Gly‐Leu‐Glu, Val‐Glu‐Ala‐Leu and Gly‐Gly‐Gly‐Glu) and SSD (Asp‐Arg, Asp‐Ala‐Glu, Glu‐Val‐Cys and Gly‐Gly‐Gly‐Glu) are tasty and/or umami‐active peptides but have not been reported as tasty peptides in the past. Conclusion Most of the peptides separated from SSD and SSS could impart an umami‐enhancing effect on soy sauce, and the marginally more kokumi and bitterness hydrophobic peptides were found in SSS than SSD. © 2020 Society of Chemical Industry

Zhu, Xiping↗
DOE OSTI2019

Auditory performance in bald eagles and red-tailed hawks: a comparative study of hearing in diurnal raptors

Collision with wind turbines is a conservation concern for eagles with population abundance implications. The development of acoustic alerting technologies to deter eagles from entering hazardous air spaces is a potentially significant mitigation strategy to diminish associated morbidity and mortality risks. As a prelude to the engineering of deterrence technologies, auditory function was assessed in bald eagles (Haliaeetus leucocephalus), as well as in red tailed hawks (Buteo jamaicensis). Auditory brainstem responses (ABRs) to a comprehensive battery of clicks and tone bursts varying in level and frequency were acquired to evaluate response thresholds, as well as suprathreshold response characteristics of wave I of the ABR, which represents the compound potential of the VIII cranial nerve. Sensitivity curves exhibited an asymmetric convex shape similar to those of other avian species, response latencies decreased exponentially with increasing stimulus level and response amplitudes grew with level in an orderly manner. Both species were responsive to a frequency band at least 4 octaves wide, with a most sensitive frequency of 2 kHz, and a high frequency limit of approximately 5.7 kHz in bald eagles and 8 kHz in red tailed hawks. Here, findings reported here provide a framework within which acoustic alerting signals might be developed.

17 WIND ENERGY↗
DOE OSTI2017

Comparative Study of Novel Fluorescent Cyanine Nucleotides: Hybridization Analysis of Labeled PCR Products Using a Biochip

This study investigated the synthesis and substrate properties of Cy5-labeled dUTP derivatives with different substituents, linkers between the dye unit and pyrimidine heterocycle and fluorophore charges. Fluorescently labeled nucleoside triphosphates were studied as substrates using multiplex PCR with Taq and Vent (exo-) DNA polymerases, the typical representatives of the A and B polymerase families. The efficiency of nucleotide incorporation during PCR was assessed with a multi-parameter hybridization analysis using a diagnostic DNA microarray. The hybridization analysis indirectly estimates the incorporation efficiency of dye-labeled nucleotides in multiplex PCR. Our results demonstrated higher efficiencies of substrates with electrically neutral dyes than electropositive and electronegative Cy5 residues.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

A Comparative Study of Doum fiber and Shrimp Chitin Based Reinforced Low Density Polyethylene Biocomposites

The aim of this paper was to study the effects of reinforcing low density polyethylene (LDPE) by using bio-fillers (Doum cellulose or Shrimp chitin) on the mechanical properties. Both, Doum cellulose extracted frsom Doum leaves and Shrimp chitin extracted from shrimp co-products were compounded with LPDE without and with compatibilizer. The biocomposites were prepared by melt blending in a twin-screw extruder. Torsion and flexural tests were performed to investigate the impact of each reinforcement on the biocomposite mechanical properties. The SEM was carried out to study the filler/polymer interface adhesion. The present study has demonstrated that Doum fibers and shrimp chitin succeed in improving the mechanical properties of LPDE bio-composites. The results also showed that the use of maleic anhydride-grafted polyethylene as a compatibilizer improves filler adhesion/matrix and mechanical properties. This study exhibits that polyethylene composites based on Doum fibers or shrimp chitin can be used to replace the polyethylene materials in several fields like packaging and automotive industries.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Reuse of Selected Lignocellulosic and Processed Biomasses as Sustainable Sources for the Fabrication of Nanocellulose via Ni(II)-Catalyzed Hydrolysis Approach: A Comparative Study

This study investigates for the first time the feasibility of isolating nanocellulose from several selected feedstocks via a novel Ni(II)-hydrolysis process, including lignocellulosic biomasses (oil palm trunk, banana peel and coconut husk) and processed biomasses (newspaper, tissue paper and cotton linter), with an obtained gravimetric yield ranging from 59.6 to 86.2%. The isolation of nanocellulose products from these selected feedstocks was verified by the successive removal of most of their non-cellulosic components (lignin and hemicellulose) and cellulose amorphous regions, the increase in the crystallinity index and the nanoscale of the individual crystals. Most importantly, the resultant nanocellulose products rendered better thermal stability than that of corresponding original sources, which are highly potential to be utilized as the new renewable sources of reinforcement materials with potential applications in bio-nanocomposites and thermoplastics. Therefore, this work proves the viability of direct production of nanocellulose from a variety of cellulosic sources by using Ni(II)-based transition metal salt catalyst. The results suggested that the concept of waste to wealth could be well executed from the obtained nanocellulose, which are greatly potential for various industrial applications.

09 BIOMASS FUELS↗
DOE OSTI2018

Comparative Study of Xylan Extracted by Sodium and Potassium Hydroxides (NaOH and KOH) from Bagasse Pulp: Characterization and Morphological Properties

Xylan is the second most abundant polysaccharide and the predominant hemicellulose component of soda bagasse pulp. The present endeavor focuses on increasing the value addition to underutilized agro-industrial residue such as bagasse. For this purpose, xylan was isolated by two conventional alkali extraction methods i.e. NaOH and KOH. The recovery rate and sugar composition of different reaction times and alkali consumptions were monitored with advanced method such as High Performance Liquid Chromatography (HPLC). The Fourier Transform Infrared Spectroscopy (FTIR) and Wide Angle X-ray spectroscopy (WAXS) were respectively employed to characterize the functional groups and Crystallinity Index (CrI) changes during the extraction process. It was explored that highest xylan recovery rates were obtained with 6% of NaOH at 120 min and 6% KOH at 45 min. The xylan morphology via WAXS was found that its structure to be amorphous. HPLC results also showed KOH had higher effectiveness than NaOH in terms of extracted xylan purity. Highest XGRs (Xylose to Glucose Ratios) were also achieved by KOH processes. Hence, this study contributes to the adequate utilization of agricultural residues, with promising potential for applications in the production of certain novel materials and chemical conversion industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

On the Role of Fermi Energy in Determining Properties of Superconductors: a Detailed Comparative Study of Two Elemental Superconductors (Sn and Pb), a Non-cuprate (MgB{sub 2}) and Three Cuprates (YBCO, Bi-2212 and Tl-2212)

Fermi energies (E{sub F}s) of high- T{sub c} superconductors (SCs) have of late been evincing considerable interest because they are believed to be the cause of their high T{sub c}s and gap structures. Since Bardeen-Cooper-Schrieffer (BCS) equations for elemental and generalized-BCS equations for non-elemental SCs are derived under the blanket of the assumption E{sub F}/ kθ > > 1 (k = Boltzmann constant, θ = Debye temperature), they cannot shed light on the E{sub F}s of these SCs. This fact leads us to address the gaps (Δ{sub 0}s) and T{sub c}s of both types of SCs via recently derived equations which incorporate E{sub F} as a variable. For the specification of the E{sub F} of any SC, we now need another of its properties. Choosing j{sub 0}, the critical current density of the SC at T = 0, and following an idea due to Pines, we present for both types of SCs new equations for j{sub 0} that depend solely on the following properties of the SC: E{sub F}, θ, gram-atomic volume, electronic specific heat constant and a dimensionless construct y=kθ√(2m∗)/P{sub 0}√(E{sub F}), where m* is the effective mass of superconducting electrons and P{sub 0} their critical momentum. Appeal to the experimental values of Δ{sub 0}, T{sub c} and j{sub 0} of any SC then not only leads to values of E{sub F}, m* and P{sub 0} but also provides plausible clues about how its j{sub 0}—and therefore T{sub c}—may be increased.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

A Comparative Study for Optimization of Sensitivity and Noise Levels in Race-Track Sensors

In this study, we have designed fluxgate sensors at race-track geometry which were used to measure DC or low-frequency magnetic fields. The type of core material and the number of core layers on the sensitivity and the noise level were specifically examined. We could achieve to get a sensitivity of 440 kV/T and a noise level of 56 pT/ √Hz at 1 Hz in a large dynamical range extending up to 1.5 Oe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗