Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Colloid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Are enzymes transported in soils by water fluxes?

Transport of extracellular hydrolytic enzymes in soils has always been a subject of doubt. The considerations against its importance are that (i) enzymes benefit their producers the most when they remain in close proximity; and (ii) enzymes are large molecules with low mobility due to high affinity to fine soil particles and organic matter. However, soil mineral colloids (SMC), to which extracellular enzymes also have an affinity and which are known to facilitate transport of a broad variety of chemicals and microorganisms in soils, can serve as vehicles for enzyme transport as well. Since current literature lacks information on enzyme transport in soils, our goal was to determine whether enzymes are transported and, if so, whether they are transported in a free- or in a colloid-associated form. We conducted column transport experiments with four hydrolytic enzymes, namely, β-glucosidase, acid-phosphatase, cellobiohydrolase, and xylosidase, in soils with contrasting textures. The eluents containing enzymes were applied on top of soil columns, while enzyme activities, SMC, and electrical conductivity were measured in the effluents from the columns. Our results provided evidence of joint enzyme transport with soil colloids. The enzymes associated with the coarse SMC (1 μm < Ø) contributed 52–88% of the total enzyme activity in the effluents. The remaining enzyme activity was attributed to the enzymes associated with organic colloids, fine SMC (Ø < 1 μm) and free enzymes in solution. Furthermore, this study suggested a dual effect of ionic strength in the soil suspension on enzyme activity and their release from soils with soil colloids.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Improving nanoparticle superlattice stability with deformable polymer gels

The self-assembly of colloidal nanoparticles into ordered superlattices typically uses dynamic interactions to govern particle crystallization, as these non-permanent bonds prevent the formation of kinetically trapped, disordered aggregates. However, while the use of reversible bonding is critical in the formation of highly ordered particle arrangements, dynamic interactions also inherently make the structures more prone to disassembly or disruption when subjected to different environmental stimuli. Thus, there is typically a trade-off between the ability to initially form an ordered colloidal material and the ability of that material to retain its order under different conditions. Here, we present a method for embedding colloidal nanoparticle superlattices into a polymer gel matrix. This encapsulation strategy physically prevents the nanoparticles from dissociating upon heating, drying, or the introduction of chemicals that would normally disrupt the lattice. However, the use of a gel as the embedding medium still permits further modification of the colloidal nanoparticle lattice by introducing stimuli that deform the gel network (as this deformation in turn alters the nanoparticle lattice structure in a predictable manner). Moreover, encapsulation of the lattice within a gel permits further stabilization into fully solid materials by removing the solvent from the gel or by replacing the solvent with a liquid monomer that can be photopolymerized. This embedding method therefore makes it possible to incorporate ordered colloidal arrays into a polymer matrix as either dynamic or static structures, expanding their potential for use in responsive materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

NNSA-IAEC Science Area V Environmental ISR: Waste Management and Subsurface Science (Final Report FY18-FY20)

In August 2017, the U.S. National Nuclear Security Administration (NNSA) and the Israel Atomic Energy Commission (IAEC) launched a joint waste management program to evaluate the feasibility of siting a radioactive waste repository at intermediate depths in Israel. The bilateral collaboration involves three National Laboratories (LLNL, LANL, and Sandia), and the Nuclear Research Center, Negev, Geological Survey of Israel, and Ben Gurion University in Israel. This research is designed to assist with the evaluation of locations for an intermediate nuclear waste repository in Israel. This final report is a high-level summary of the results from the past three years by the team that worked on the WM-2: Radionuclide colloid-facilitated transport in fractured carbonate rock project for Science Area V, Environmental ISR: Subsurface Science and Waste Management. We have completed all of our tasks and met all of our milestones. MW-2 had three integrated tasks. Task 1 was laboratory experiments investigating colloid transport of radionuclides in natural fractured carbonate rocks from the Avdat formation, Israel. Task 2 was field experiments injecting radionuclide analogues pre-sorbed to clay colloids into fractured carbonate rock, and task 3 was numerical modeling of laboratory and field experimental results to assess the importance of colloids in the migration of relevant radionuclides. This task was incorporated into tasks 1 and 2. A 4 th task was initiated in FY20, to investigate the role of organics in facilitating radionuclide transport under the same conditions explored in task 1 due to the high organic content of the rocks being investigated for the immediate borehole locations. Preliminary results will be summarized here and the work will continue in FY21-23. The overall objective of this research is to evaluate the role of colloids (naturally occurring < 1 micron particles) in facilitating the transport of long-lived radionuclides from a nuclear waste repository situated in fractured carbonate rocks. Currently little data exists on radionuclide transport in carbonate rocks, but this is the main rock type available for siting a repository in Israel. Laboratory experiments were carried out in both Israel and the U.S., field experiments have taken place in Israel, and reactive transport modeling involved LLNL, LANL and Israel partner institutions. LLNL hosted a graduate student, Emily Tran, from Ben Gurion University in FY18 and FY19 and much of the work presented here was part of her PhD research.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Poly(acrylic acid) Enabling the Synthesis of Highly Uniform Silica Nanoparticles of sub-100 nm

Robust synthesis of small colloidal silica (SiO 2 ) nanoparticles with narrow size distributions (<5%) is challenging because the possible involvement of continuous nucleation and growth of SiO 2 in the widely used Stöber process usually results in silica nanoparticles with large sizes and broad size distributions. Promoting heterogeneous nucleation and growth of silica is promising to tackle the challenges by in-situ forming transient colloidal seeds that provide nucleation surfaces for silica condensate. Here in this work, poly(acrylic acid) (PAA) is introduced to the Stöber synthesis solutions, which are usually composed of ethanol (containing a trace amount of water), tetraethyl orthosilicate (TEOS), and ammonia, to mediate the nucleation of TEOS hydrolysates and growth of SiO 2 nanoparticles. PAA reacts with ammonia to form soft PAA-NH 3 complex colloids that serve as transient seeds to facilitate heterogeneous nucleation and growth of SiO 2 nanoparticles after adding TEOS to the synthesis solution. The number of PAA-NH 3 complex colloidal particles, which strongly depends on the molar ratio of PAA and ammonia, determines the number of the resulting SiO 2 nanoparticles and thus the size of the SiO 2 nanoparticles correspondingly according to the supply of TEOS. Highly uniform SiO 2 nanoparticles with finely tuned diameters in the sub-100 region have been successfully synthesized, and the synthesis protocol is feasible to be scaled up while maintaining the high quality of SiO 2 nanoparticles.

heterogeneous nucleation and growth of nanoparticl↗
DOE OSTI2022

Solubility controls on plutonium and americium release in subsurface environments exposed to acidic processing wastes

To identify the role of waste composition and sediment interactions in controlling Pu and Am mobility in contaminated sediments at Hanford, a legacy nuclear site, Pu and Am concentrations in solutions equilibrated with contaminated sediments from beneath the 216-Z-9 (Z-9) Trench were compared to the solubilities of PuO 2 materials, synthesized by methods representative of the disposed wastes, in the absence of sediments. Furthermore, this work shows that the solubilities of PuO 2 materials synthesized by different methods, and with varying particle sizes, agree with PuO 2 (am,hyd), although dissolution kinetics differed between materials. According to saturation index (SI) calculations, PuO 2 (am,hyd) is likely also controlling Pu release from sediments under conditions where phosphate concentrations are low. However, both Pu-phosphate and Am-phosphate phases, identified in SI calculations and by high resolution transmission electron microscopy, play roles in controlling release in low pH, high phosphate, shallow sediments just below the Z-9 Trench. The elevated phosphate is likely due to decomposition of tributyl phosphate from waste solutions over time. Sediments from deeper in the subsurface beneath the Z-9 Trench are less acidic and contain less phosphate, with Pu solubility likely controlled by PuO 2 (am,hyd) that precipitated following neutralization of the acidic waste stream. Controls on Am concentrations in deeper sediments are more complex and potentially involve sediment adsorption and/or release from Pu (1-x) Am x O 2 following Am in-growth. The concentrations of both Pu and Am were elevated in the colloidal fraction associated with shallow sediments, but not in PuO 2 experiments, suggesting the presence of Pu/Am pseudocolloids (e.g., Pu/Am associated with mineral colloids). However, Pu and Am association with the colloidal size fraction was not observed in deeper sediments, suggesting transport of Pu and Am to these depths beneath the Z-9 Trench was not due to colloidal transport.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Aqueous TiO 2 Nanoparticles React by Proton-Coupled Electron Transfer

Redox reactions of aqueous colloidal TiO 2 4 nm nanoparticles (NPs) have been examined, including both citratecapped and uncapped NPs (c-TiO 2 and uc-TiO 2 ). Photoreduction gave stable blue colloidal c-TiO 2 R NPs with 10–60 electrons per particle. Equilibration of these reduced NPs with soluble redox reagents such as methylviologen (MV 2+ ) provided measurements of the colloid reduction potential as a function of pH. The potentials of c-TiO 2 from pH 2–9 varied linearly with pH, with a slope of –60 ± 5 mV/pH. Estimates of the potential at pH 12 were consistent with extrapolating that line to high pH. The reduction potentials did not correlate with the zeta potentials (ζ) or the surface charge of the NPs across this pH range. Similar reduction potentials were observed for c- and uc-TiO 2 at low pH even though they have quite different ζ potentials. These results show that the common surface-charging explanation of the pH dependence is not tenable in these systems. Oxidation of reduced c-TiO 2 R with the electron-transfer oxidant potassium triiodide (KI 3 ) occurred with a significant drop in pH, showing that protons were released when the electrons were removed from the NPs. Smaller pH drops were observed for the proton-coupled electron transfer (PCET) reagents O 2 (air) and 4-MeO-TEMPO (4-methoxy-2,2,6,6-tetramethylpiperine-1-oxy radical). The difference in the number of protons released with KI 3 vs O 2 and 4-MeO-TEMPO was roughly one proton per electron removed. Thus, the thermodynamically preferred reactivity of these colloidal TiO 2 NPs is PCET over the pH 2–13 range studied. The measured redox potentials refer to the chemical process TiO 2 + H + + e – → TiO 2 ·e – ,H + ; and therefore they do not correspond with an electronic energy such as a conduction band edge or flat band potential. The 1e – /1H + stoichiometry means that the TiO 2 reduction potentials correspond to a TiO 2 –H bond dissociation free energy (BDFE), determined to be 49 ± 2 kcal mol –1 . The PCET description is consistent with the pH dependence of E(TiO 2 /TiO 2 ·e – ,H + ), the release of protons upon oxidation, the lack of correlation with ζ potentials, the similarity of capped and uncapped NPs, and the small change in the potential and BDFE from the first to the last electron/proton pair (H atom) removed. Furthermore, this behavior is suggested to be the norm for redox-active oxide/water interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Depletion-Driven Assembly of Polymer-Coated Nanocrystals

Depletion-driven assembly has been widely studied for micron-sized colloids, but questions remain at the nanoscale where the governing physics are impacted by stabilizing surface ligands or wrapping polymers, whose dimensions are similar to those of the colloidal core and the depletant. Here, we probe how wrapping colloidal tin-doped indium oxide nanocrystals with polymers affects their depletion-induced interactions and assembly in solutions of polyethylene glycol. Copolymers of polyacrylic acid grafted with polyethylene oxide provide nanocrystal wrappings with different effective polymer graft densities and molecular weights. (Ultra) small angle X-ray scattering, coarse-grained molecular dynamics simulation, and molecular thermodynamic theory were combined to analyze how depletant size and polymer wrapping characteristics affect depletion interactions, structure, and phase behavior. The results show how depletant molecular weight, as well as surface density and molecular weight of polymer grafts, set thresholds for assembly. These signatures are unique to depletion-driven assembly of nanoscale colloids and mirror phase behaviors of grafted nanoparticle–polymer composites. Optical and rheological responses of depletion-driven assemblies of nanocrystals with different polymer shell architectures were probed to learn how their structural differences impact properties. Finally, we discuss how these wrinkles for depletion-driven assembly at the nanoscale may provide fresh opportunities for designing responsive depletion interactions and dynamically reconfigurable materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Microstructural and Rheological Transitions in Bacterial Biofilms

Biofilms are aggregated bacterial communities structured within an extracellular matrix (ECM). ECM controls biofilm architecture and confers mechanical resistance against shear forces. From a physical perspective, biofilms can be described as colloidal gels, where bacterial cells are analogous to colloidal particles distributed in the polymeric ECM. However, the influence of the ECM in altering the cellular packing fraction (Φ) and the resulting viscoelastic behavior of biofilm remains unexplored. Using biofilms of Pantoea sp. (WT) and its mutant (ΔUDP), the correlation between biofilm structure and its viscoelastic response is investigated. Experiments show that the reduction of exopolysaccharide production in ΔUDP biofilms corresponds with a seven-fold increase in Φ, resulting in a colloidal glass-like structure. Consequently, the rheological signatures become altered, with the WT behaving like a weak gel, whilst the ΔUDP displayed a glass-like rheological signature. By co-culturing the two strains, biofilm Φ is modulated which allows us to explore the structural changes and capture a change in viscoelastic response from a weak to a strong gel, and to a colloidal glass-like state. The results reveal the role of exopolysaccharide in mediating a structural transition in biofilms and demonstrate a correlation between biofilm structure and viscoelastic response.

viscoelasticity↗
DOE OSTI2026

Alternating salt and freshwater floods of coastal soils impact soil structure, hydraulic properties, and oxygen dynamics

Coastal soils are increasingly impacted by hydrologic intensification in the form of rising sea level and flooding from storm surges and precipitation. Alternating saltwater (SW) and freshwater (FW) exposure has the potential to disperse colloids, which can lead to disintegration of soil structure, clogging of pore spaces, and reduction in ecologically and biogeochemically important functions like infiltration or gas exchange. To investigate how hydrologic intensification affects soil structure and oxygen dynamics, we conducted a series of laboratory-based flood simulations. Intact soil cores of the A and B horizons (22 total) from the toe slope of an upland coastal forest along the western shore of Chesapeake Bay. We subjected the cores to 24 h of saturation with either FW or alternating brackish SW and FW, with a 24-h draining event in between flood events. Oxygen diffusion into soil during draining was reduced by up to 30% for soils flooded alternating SW-FW compared to soils flooded only with FW. We attributed the reduced oxygen diffusion to clogging of smaller pores by colloids, with colloid redistribution observed as an increase in specific surface area down the core profile of up to 59%. After three SW-FW floods (six floods total), there were significant changes in pore size distribution, significant redistribution of colloids, and the A horizon became sodic. We concluded that a small number of SW flooding events can induce a measurable change in soil physical properties that directly impacts the biogeochemical dynamics.

Rod, Kenton A. [Pacific Northwest National Laborat↗
DOE OSTI2020

Correlating inter-particle forces and particle shape to shear-induced aggregation/fragmentation and rheology for dilute anisotropic particle suspensions: A complementary study via capillary rheometry and in-situ small and ultra-small angle X-ray scattering

Predicting the stability of suspensions composed of anisotropic particles is difficult due to the complexity and interplay of hydrodynamic and colloidal forces. For example, it is not well understood how non-spherical particle shapes affect suspension-rheological responses. This study presents evidence showing how the stacking of boehmite platelets dispersed in aqueous solution leads to moderate shear thinning, even at low boehmite mass fractions. Wide angle X-ray, small angle X-ray, and ultra-small angle X-ray scattering were used to simultaneously monitor changes to the size and fractal dimensions of boehmite aggregates from 6 – 10,000 Å as the sample was recirculated through an in situ capillary rheometer. The latter also provided simultaneous measurements of the viscosity of the suspensions. Computational fluid dynamics modeling of the apparatus was used to provide a more rigorous analysis of the fluid flow. In addition to shear-induced aggregation/fragmentation correlated to a complicated balance between hydrodynamic and colloidal forces, the results indicate that orientationally-dependent interactions, arising from non-spherical boehmite aggregate sub-units, may explain the relatively large experimental viscosity when the hydrodynamic force is small compared to colloidal forces. Ultimately, the results from this study can provide a foundation for future work investigating particle shape effects on colloidal and hydrodynamics forces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Alkaline-Earth Chalcogenide Nanocrystals: Solution-Phase Synthesis, Surface Chemistry, and Stability

Increasing demand for effective energy conversion materials and devices has renewed interest in semiconductors comprised of earth-abundant and biocompatible elements. Alkaline-earth sulfides doped with rare earth ions are versatile optical materials. However, relatively little is known about controlling the dimensionality, surface chemistry, and inherent optical properties of the undoped versions of alkaline-earth monoand polychalcogenides. Here, we describe the colloidal synthesis of alkaline-earth chalcogenide nanocrystals through the reaction of metal carboxylates with carbon disulfide or selenourea. Systematic exploration of the synthetic phase space allows us to tune particle sizes over a wide range using a mixture of commercially available carboxylate precursors. Solid-state NMR spectroscopy confirms the phase purity of the selenide compositions. Surface characterization reveals that bridging carboxylates and amines preferentially terminate the surface of the nanocrystals. While these materials are colloidally stable in the mother solution, the selenides are susceptible to oxidation over time, eventually degrading to selenium metal through polyselenide intermediates. As part of these investigations, we have developed the colloidal syntheses of barium di- and triselenides, two among few reported nanocrystalline alkaline-earth polychalcogenides. Electronic structure calculations reveal that both materials are indirect band gap semiconductors. The colloidal chemistry presented here may enable the synthesis of more complex, multinary chalcogenide materials containing alkaline-earth elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quantifying patterns in optical micrographs of one- and two-dimensional ellipsoidal particle assemblies

Current developments in colloidal science include the assembly of anisotropic colloids with broad geometric diversity. As the complexity of particle assemblies increases, the need for ubiquitous algorithms that quantitatively analyze images of the assemblies to deliver key information such as quantification of crystal structures becomes more urgent. This contribution describes algorithms capable of image analysis for classifying colloidal structures based on abstracted interparticle relationship information and quantitatively analyzing the abundance of each structure in mixed pattern assemblies. The algorithm parameters can be adjusted, allowing for the algorithms to be adapted for different image analyses. Three different ellipsoidal particle assembly images are presented to demonstrate the effectiveness of the algorithms: a one-dimensional (1D) particle chain assembly and two two-dimensional (2D) polymorphic crystals each consisting of assemblies of two distinct plane symmetry groups. Angle relationships between neighbouring particles are calculated and neighbour counts of each particle are determined. Combining these two parameters as rules for classification criteria allows for the labeling and quantification of each particle into a defined symmetry class within an assembly. The algorithms provide a labelled image comprising classification results and particle counts of each defined class. For multiple images or individual frames from a video, the script can be looped to achieve automatic processing. The yielded classification data allow for more in-depth image analysis of mixed pattern particle assemblies. Finally, we envision that these algorithms will have utility in quantitative analysis of images comprising ellipsoidal colloidal materials, nanoparticles, or biological matter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Surface-mediated spontaneous emulsification of the acylated peptide, semaglutide

Acylated peptides composed of glucagon-like peptide-1 receptor agonists modified with a fatty acid side chain are an important class of therapeutics for type 2 diabetes and obesity but are susceptible to an unusual physical instability in the presence of hydrophobic surfaces, i.e., spontaneous emulsification, also known as ouzo formation in practice. In this work, light scattering, small-angle X-ray scattering, and circular dichroism measurements are used to characterize the physical properties of the semaglutide colloidal phase, including size distribution, shape, secondary structure, internal structure, and internal composition, as a function of solution physico-chemical conditions. The existence and size of the colloids formed are successfully predicted by a classical Rayleigh model, which identifies the parameters controlling their size and formation. Colloid formation is found to be catalyzed by hydrophobic surfaces, and formation rates are modeled as an autocatalytic reaction, enabling the formation of a master curve for various surfaces that elucidates the mechanism. Surfaces differ due to differences in surface wettability, which can be correlated with Hansen solubility parameters. This work provides insights into this unusual colloidal phenomenon and guides the peptide synthesis process and drug product formulation in the pharmaceutical industry.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Generation and Characteristics of Plutonium and Americium Contaminated Soils Underlying Waste Sites at Hanford

In 2012, a Hanford site-wide review on plutonium and americium geochemistry (Cantrell and Felmy 2012) identified remaining research challenges associated with defining scientifically defensible end-states and supporting remediation decisions. Three research challenges were identified in this review: 1. Determine the transformations of Hanford Site sediments in response to changes in waste/groundwater composition. Significant mineralogical transformations can take place when wastes contact Hanford sediments. These transformations can significantly impact the solubility and acidic adsorption of plutonium and americium and possibly result in the generation of pseudo colloids that could facilitate plutonium/americium migration. 2. Assess the impact of changes in waste/groundwater chemistry on the potential for plutonium/americium solubilization or colloid formation. Changes in waste or groundwater chemistry can greatly impact the chemical form or speciation of plutonium and americium. Knowledge of plutonium and americium speciation will be crucial in terms of evaluating the potential for solubilization, adsorption or remobilization of adsorbed complexes, colloid formation, and colloid interactions with sedimentary minerals. 3. Establish the role of organic complexants and/or non-aqueous solvents in the transport of plutonium/americium in the deep subsurface. Plutonium has been found to be associated with TBP and the presence of non-aqueous solvents, at least in certain Z-9 sediments. It will be important to establish the role of non-aqueous solvent in past movement of plutonium and its potential role in future mobility. This report provides the technical basis for interpreting data obtained from field samples and will allow waste chemistry impacts on plutonium/americium re-mobilization mechanisms to be assessed. This report helps address the three previously identified research challenges – sediment transformations, solution chemistry impacts, and the role of organic complexants and solvents – in plutonium and americium contaminated Hanford sediments. Ultimately, these and potential future studies will lead to a defensible description of plutonium and americium mobility in relation to waste site conditions that can be interpreted to balance the risks posed by their migration and envisioned remediation activities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

In-situ Investigations on Gold Nanoparticles Stabilization Mechanisms in Biological Environments Containing HSA

Nanoparticles (NPs) developments advance innovative biomedical applications. However, complex interactions and the low colloidal stability of NPs in biological media restrict their widespread utilization. The influence of NPs properties on the colloidal stability for gold NPs with 5 and 40 nm in diameter with two surface modifications, methoxy-polyethylene glycol-sulfhydryl (PEG) and citrate, in NaCl and human serum albumin (HSA) protein solution, is investigated. This study is based on small-angle X-ray scattering (SAXS) methods allowing the in-situ monitoring of interactions in physiological conditions. The PEG coating provides high colloidal stability for NPs of both sizes. For 5 nm NPs in NaCl solution, a stable 3D self-assembled body-centered cubic (BCC) arrangement is detected with an interparticle distance of 20.7 ± 0.1 nm. In protein solution, this distance increases to 21.9 ± 0.1 nm by protein penetration inside the ordered structure. For citrate-capped NPs, a different mechanism is observed. The protein particles attach to the NPs surfaces, and an appropriate concentration of proteins results in a stable suspension. Cryogenic transmission electron microscopy (Cryo-TEM), UV–visible spectroscopy, and dynamic light scattering (DLS) support the SAXS results. The findings will pave the way to design and synthesize NPs with controlled behaviors in biomedical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Inkjet printing of epitaxially connected nanocrystal superlattices

Access to a blossoming library of colloidal nanomaterials provides building blocks for complex assembled materials. The journey to bring these prospects to fruition stands to benefit from the application of advanced processing methods. Epitaxially connected nanocrystal (or quantum dot) superlattices present a captivating model system for mesocrystals with intriguing emergent properties. The conventional processing approach to creating these materials involves assembling and attaching the constituent nanocrystals at the interface between two immiscible fluids. Processing small liquid volumes of the colloidal nanocrystal solution involves several complexities arising from the concurrent spreading, evaporation, assembly, and attachment. The ability of inkjet printers to deliver small (typically picoliter) liquid volumes with precise positioning is attractive to advance fundamental insights into the processing science, and thereby potentially enable new routes to incorporate the epitaxially connected superlattices into technology platforms. In this study, we identified the processing window of opportunity, including nanocrystal ink formulation and printing approach to enable delivery of colloidal nanocrystals from an inkjet nozzle onto the surface of a sessile droplet of the immiscible subphase. We demonstrate how inkjet printing can be scaled-down to enable the fabrication of epitaxially connected superlattices on patterned sub-millimeter droplets. Furthermore, we anticipate that insights from this work will spur on future advances to enable more mechanistic insights into the assembly processes and new avenues to create high-fidelity superlattices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Ink-substrate interactions during 3D printing revealed by time-resolved coherent X-ray scattering

Additive printing techniques are regarded as revolutionary and versatile methods of advanced device manufacturing, stemming from the possibility to pattern materials on a custom-based approach and the potential to create novel microstructures and achieve new functionalities. Despite these advantages, the inherent anisotropy of the printing process is a source of property gradients within the printed materials, often associated with variable and/or poor performance. Up to date, the evolutionary pathways associated with printing have largely remained unaddressed, mainly owing to the difficulty to study the transformations induced in the material during processing. Time-resolved coherent X-ray scattering techniques, such as X-ray photon correlation spectroscopy, enable the in situ study of transient nanoscale and mesoscale states in a large variety of materials, including amorphous ones, by directly accessing the most relevant timescales and length scales of their nanoscale and mesoscale dynamics, self-assembly, and mesostructure evolution. In this work, we conduct in operando studies of continuous-flow direct writing with colloidal inks, focusing on how the ink formulation and ink-substrate interactions affect the processes that determine the macroscopic properties of the printed materials. We find fundamental differences in the ink structural relaxations emerging from the primary colloid properties (monodisperse versus aggregated colloids) and the substrates surface energy and mechanical properties. Our work helps to reveal and quantify the basic science governing the evolution of 3D-printed materials during processing, ultimately improving engineering criteria for the design of printable materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Shape-anisotropy inverses the behavior of emergent vortices in active chiral fluids

Active colloidal fluids exhibit spontaneous emergence of correlated states, characterized by complex collective dynamics and self-organization. In geometrically confined systems, activity modulations trigger robust polar state reversals of a macroscopic vortex formed by colloidal rollers. Here, we reveal that the shape anisotropy of dielectric rollers transforms the system into a chiral active fluid comprised of rollers of arbitrary handedness. The chiral rollers self-assemble into multiple freestanding vortices with a spontaneously selected sense of rotation. We demonstrate that upon reactivation of the system after a complete cessation of activity beyond all relevant timescales, the vortices simultaneously restore their previous chiral states in striking contrast to the chiral state reversals demonstrated by spherical rollers. The analysis reveals that shape-anisotropy modifies the collective state memory of the ensemble. The findings provide insights into the emergence of complex collective behavior in chiral colloidal fluids governed by an interplay between shape anisotropy, chiral motion, and activity modulations.

Colloids↗