Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ceramic materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Direct Ink-Write Printing of Ceramic Clay with an Embedded Wireless Temperature and Relative Humidity Sensor

This research presents a simple method to additively manufacture Cone 5 porcelain clay ceramics by using the direct ink-write (DIW) printing technique. DIW has allowed the application of extruding highly viscous ceramic materials with relatively high-quality and good mechanical properties, which additionally allows a freedom of design and the capability of manufacturing complex geometrical shapes. Clay particles were mixed with deionized (DI) water at different ratios, where the most suitable composition for 3D printing was observed at a 1:5 w/c ratio (16.2 wt.%. of DI water). Differential geometrical designs were printed to demonstrate the printing capabilities of the paste. In addition, a clay structure was fabricated with an embedded wireless temperature and relative humidity (RH) sensor during the 3D printing process. The embedded sensor read up to 65% RH and temperatures of up to 85 °F from a maximum distance of 141.7 m. The structural integrity of the selected 3D printed geometries was confirmed through the compressive strength of fired and non-fired clay samples, with strengths of 70 MPa and 90 MPa, respectively. This research demonstrates the feasibility of using the DIW printing of porcelain clay with embedded sensors, with fully functional temperature- and humidity-sensing capabilities.

42 ENGINEERING↗
DOE OSTI2024

Time-Dependent Failure Assessment of Ceramic Receivers

The outlet temperature targets for Gen 3 Concentrating Solar Power (CSP) systems pose a significant challenge to the structural reliability of high temperature metallic components, including those manufactured from nickel-based superalloys. Advanced ceramics present a potential solution due to their excellent high-temperature strength. However, accurate assessment of ceramic components requires an entirely different approach compared to metallic components. This paper describes the implementation of time-dependent reliability analysis of ceramic components in srlife – an open-source software package for estimating the life of high temperature CSP components. This new capability will allow high temperature CSP designers to make fair comparisons between competing metallic and ceramic designs and accurately assess the performance of different ceramic materials for CSP receivers and other components. The current version of the tool is available at https://github.com/Argonne-National-Laboratory/srlife.

Barua, Bipul (ORCID:0000000247184113)↗
NASA NTRS1966

Fibers of newly developed refractory ceramics produced by improved process

Rods of refractory ceramic material and glasses having relatively high fusion temperatures and tensile strengths are converted to fiber by subjecting these rods to alternate fusion and gas-jet bursts. The refractory, high tensile strength fibers produced are combined with suitable binder to produce heat-resistant fabrics and rigid structures.

Source record↗
NASA NTRS1972

A piezoelectrically actuated ball valve

Bimorph strip composed of two layers of poled piezoelectric ceramic material closes and opens valve. Strip performs like capacitator, allowing initial inrush of current when valve is energized and then only small leakage current flows as valve remains energized.

Erwin, L. R.↗
NASA NTRS1972

Mechanically and thermally stable maser cavity resonator

New type cavity resonator is designed for hydrogen maser. Resonator consists of three pieces of glass-ceramic material having extremely low thermal coefficient of expansion and provides very stable mechanical tuning.

Vessot, R. F. C.↗
NASA NTRS1971

Development of nonflammable potting compounds for spacecraft

The requirements for nonflammable potting compounds for use in spacecraft electric and electronic equipment are discussed. The development of a suitable nonflammable compound is described. Flammability testing and acceptance criteria for Apollo spacecraft are presented. The dielectric properties of various ceramic materials used as conformal coatings are examined.

Kline, H. F.↗
NASA NTRS1972

Development of piezoelectric skin friction force vector transducer for a hypersonic wind tunnel

A surface shear force transducer for use in impulse type hypersonic tunnels is described. Sensors are constructed of lead zirconate titanate composition piezoelectric ceramic materials. The diameter of the sensing diaphragm is 0.75 inches and overall transducer dimensions are 1.0 inch diameter and 0.625 inch height. Analysis of the tranducer is made to help design criteria and fabrication techniques. Discussions on design and fabrication techniques are presented as well as performance of transducers delivered.

Kahng, S. K.↗
NASA NTRS1972

Strain-biased PLZT input devices /page composers/ for holographic memories and optical data processing.

The features of a new class of transparent ferroelectric ceramic materials, called PLZT, are described. PLZT are shown to have very strong electrooptic properties and memory, and are switched through transparent electrodes when mechanically strained. Because of these properties, they can be used to fabricate two-dimensional page composers for coherent optical systems. Techniques for fabricating such devices are outlined along with preliminary test results. Applications in displays are shown to be also feasible.

Roberts, H. N.↗
NASA NTRS1971

Ceramics in severe environments; Proceedings of the Sixth University Conference on Ceramic Science, North Carolina State University, Raleigh, N.C., December 7-9, 1970.

The papers examine new findings and present technologically significant environmental effects and limitations relating to ceramic materials, their properties, and their uses. The effects of thermal and thermochemical factors, thermal shock, concentrated stresses, and severe mechanical environments are considered, as well as stress corrosion, hydrostatic stress, and electromagnetic and nuclear radiation environments. Individual items are abstracted in this issue.

Kriegel, W. W.↗
NASA NTRS1972

The mechanism of grain growth in ceramics

The theory of grain boundary migration as a thermally activated process is reviewed, the basic mechanisms in ceramics being the same as in metals. However, porosity and non-stochiometry in ceramic materials give an added dimension to the theory and make quantitative treatment of real systems rather complex. Grain growth is a result of several simultaneous (and sometimes interacting) processes; these are most easily discussed separately, but the overall rate depends on their interaction. Sufficient insight into the nature of rate controlling diffusion mechanisms is necessary before a qualitative understanding of boundary mobility can be developed.

Kapadia, C. M.↗
NASA NTRS1974

High-temperature tensile tester for ceramics

Apparatus measures tensile strength of rigid, low-density ceramic materials at temperatures up to 1375 K. Tensile grips mate with tensile specimen and form top and bottom of lightweight furnace. Apparatus can only be used with rigid materials and grips must be stronger than material under test.

Smith, M.↗
NASA NTRS1973

Tunable cavity resonator with ramp shaped supports

A cavity for a hydrogen maser is described consisting of three parts which provide highly stable mechanical and thermal expansion characteristics for the cavity and ease of tuning. The three parts which are made of a glass ceramic material having a very small thermal expansion coefficient (1) a top plate, (2) a cylinder with three interrupted helical ramps at its bottom, and (3) a base which includes a bottom plate and three ramp lugs on which the helical ramps of the cylinder rest when the cylinder is placed on the base with the bottom plate in the cylinder. Cavity tuning is achieved by rotating the cylinder and thereby raising or lowering it on the base, which results in changing the cylinder volume by changing the distance between the bottom and top plates.

Vessot, R. F. C.↗
NASA NTRS1974

Auger spectroscopy of fracture surfaces of ceramics

Results of Auger electron spectroscopy (AES) studies of fracture surfaces in a series of ceramic materials, including Al2O3, MgO, and Si3N4, which were formed using different processing techniques. AES on the fractured surface of a lunar sample is also discussed. Scanning electron micrograph fractography is used to relate the surface chemistry to the failure mode. Combined argon ion sputtering and AES studies demonstrate the local variations in chemistry near the fracture surface. The problems associated with doing AES in insulators are also discussed, and the experimental techniques directed toward solving them are described.

Marcus, H. L.↗
NASA NTRS1975

Fabrication and evaluation of an OSO-1 type baseplate

An OSO-1 type baseplate of a low thermal-expansion glass-ceramic material was evaluated for its dimensional stability after exposure to thermal cycling and mechanical vibration. The results indicate that baseplates of relatively simple design can be successfully cast and machined, although the demonstration article produced deviated somewhat from design specifications. It is likely that baseplates of more sophisticated designs and improved structural efficiency also can be prepared from low thermal expansion material.

Marschall, C. W.↗