Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Research on the Preparation of (CuAg){sub x}In{sub 2x}Zn{sub 2(1-2x)}S{sub 2} Solid Solution Photocatalysts

ZnS-CuInS{sub 2}-AgInS{sub 2} solid solution photocatalysts were successfully prepared by co-precipitation method with heat treatment under different atmosphere (N{sub 2} and H{sub 2}S). XRD, XRF, UV-vis, and SEM were used to characterize the prepared photocatalysts, indicated that the composition of result photocatalysts were different from each other and also the rate of charge, though they possessed a wurtzite-type phase structure. The photocatalysts all showed photocatalytic activities for H{sub 2} evolution from aqueous solutions containing SO{sub 3}{sup 2-} and S{sup 2-} as sacrificial reagents under visible light irradiation with Ru loading, but sample treated under H{sub 2}S atmosphere performed better, the possible reason was proposed.

36 MATERIALS SCIENCE↗

Influence of the Sediment Properties of Al{sub 2}O{sub 3{center_dot}}xH{sub 2O} on the Hydrothermal Formation AlOOH Whiskers

Boehmite ({gamma}-AlOOH) whiskers were prepared via the co-precipitation of the hydrated alumina (Al{sub 2}O{sub 3{center_dot}}xH{sub 2}O,x = 4.2-5.6) precursor at room temperature followed by hydrothermal treatment of the precursor slurry at elevated temperature. With the isoelectric pH of 7.9, the precursors formed at pH<6 was dispersive and stable, whereas the precursors formed at pH 7-9 were agglomerated and easy to be deposited. The partial removal of NO{sub 3}{sup -} from the precursor slurry favored the hydrothermal growth of the {gamma}-AlOOH whiskers. Dispersive {gamma}-AlOOH whiskers with a length of 500-1500 nm, a diameter of 20-40 nm and an aspect ratio of 16-50 were synthesized by hydrothermal treatment of the Al{sub 2}O{sub 3{center_dot}}5.6H{sub 2}O slurry at 220 deg. C for 6.0 h.

36 MATERIALS SCIENCE↗

Contribution to the Study of Ferrite Nanobeads: Synthesis, Characterization and Investigation of Horizontal Low Gradient Magnetophoresis Behaviour

In this work we investigate the possibilities of the use of Horizontal Low Gradient Magnetic Field (HLGMF)(<100 T/m) for filtration, control and separation of the synthesized magnetic particles, considering, the characteristics of the suspension, the size and the type of nanoparticles (NPs) and focusing on the process scale up. Reversible aggregation is considered in the different steps of magnetic nanobeads synthesis. For these purpose, we synthesized Fe{sub 2}O{sub 3}-silica core-shell nanobeads by co-precipitation, monodispersion and silica coating. SQUID, TEM, XRD, and Zeta potential techniques were used to characterize the synthesized nanobeads. An extensive magnetophoresis study was performed at different magnetophoretic conditions. Different reversible aggregation times were observed at different HLGMF, at each step of the synthesis route: Several orders of magnitude differences where observed when comparing citric acid (CA) suspension with silicon coated beads. Reversible aggregation times are correlated with the properties of the NPs at different steps of synthesis.

36 MATERIALS SCIENCE↗

Synthesis, Characterization, and Preliminary Investigation of Cell Interaction of Magnetic Nanoparticles with Catechol-Containing Shells

Superparamagnetic iron oxide cores were synthesized by co-precipitation of Fe(II) and Fe(III) salts and subsequently stabilized by coating with different catechols (levodopa, dopamine, hydrocaffeic acid, dopamine-containing carboxymethyl dextran) known to act as high-affinity, bidentate ligands for Fe(III). The prepared stable magnetic fluids were characterized with regard to their chemical composition (content of iron and shell material, Fe(II)/Fe(III) ratio) and their physical properties (size, surface charge, magnetic parameters). The nanoparticles showed no or only slight cytotoxic effects within 1 and 4 days of incubation with 3T3 fibroblast cells. Preliminary experiments were performed to study the interaction of the prepared nanoparticles with human MCF-7 breast cancer cells and leukocytes. An intense interaction of the MCF-7 cells with these particles was found whereas the leukocytes showed a lower tendency of interaction. Based on these finding, the novel magnetic nanoparticles possess the potential for use in depletion of tumor cells from peripheral blood.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis And Luminescence Studies Of Mn doped CaF{sub 2}

Nano particles of CaF{sub 2}:Mn were synthesized by a co-precipitation method. The maximum Mn concentration which could be doped into the CaF{sub 2} lattice was {approx}3%. The photoluminescence and thermally stimulated luminescence (TSL) were studied for different Mn doping. High dopant concentration leads to the appearance of yellow orange luminescence (580 nm) band due to the introduction of excitation levels in the deep UV region. A slight decrease in TSL peak temperature was observed at higher Mn concentrations after attaining a maximum at 1.3% Mn. Based on TSL data optimum doping concentration was found to be 2.5%. These nanoparticles were further hot pressed in vacuum to produce optically transparent ceramic.

36 MATERIALS SCIENCE↗

Thermoluminescence Characteristics of Nanocrystalline LiF Phosphors Synthesized at Different pH Values

Nanocrystalline lithium fluoride (LiF) phosphors have been prepared by the chemical co-precipitation method at different pH values (7.0, 8.0, 9.0). The formation of nanocrystalline structure has been confirmed by X-ray diffraction and transmission electron microscope. The thermolumniscence (TL) properties of LiF phosphors irradiated with gamma rays at different doses have been studied. The analysis of TL glow curve has revealed the existence of two well resolved glow peaks, one low temperature peak at around 145 deg. C and other one at higher temperature around 375 deg. C. The LiF nano-crystallites synthesized at 8.00 pH have been found to show maximum TL intensity at studied gamma doses (0.1 Gy-15 Gy).

36 MATERIALS SCIENCE↗

Nanocrystalline BaSO{sub 4}:Eu For Dosimetry of Proton Beams

Nanocrystalline BaSO{sub 4} doped with Eu, was prepared by the Chemical Co-precipitation method. The particle size was calculated by the broadening of the XRD peaks using Scherrer's formula with particle size around 45 nm. Samples in the form of pellets were irradiated by 150 MeV proton beam with dose range of 0.1 Gy to 325 Gy. Thermoluminescence (TL) glow curves of the irradiated samples were recorded and studied. It has been found that there are two prominent TL glow peaks at 460 K and 495 K. The TL response is sublinear below 1 Gy, linear in the range 1 Gy to 200 Gy and then becomes supralinear for higher doses. The wider linear TL response of nanocrystalline BaSO{sub 4}:Eu and low fading makes it a superior candidate as a dosimeter to be used for detecting the doses of protons for its various applications in the field of space, therapy and research.

61 RADIATION PROTECTION AND DOSIMETRY↗

Pure LiF nanophosphors for high exposures of gamma-rays

Nanocrystalline lithium fluoride (LiF) phosphors have been prepared by the chemical co-precipitation method at different pH values (7.0, 8.0, 9.0 and 10.00). The formation of nanocrystalline structure has been confirmed by X-ray diffraction and transmission electron microscope. Thermoluminescence (TL) properties of LiF phosphors irradiated with gamma rays at different doses of 10 Gy - 70 kGy have been further studied. The analysis of TL glow curve revealed the existence of three well resolved glow peaks, first low temperature peak at around 82 deg. C, second at 125 deg. C and third one at higher temperature around 303 deg. C. The LiF nano-crystallites synthesized at 8.00 pH with maximum TL sensitivity at studied gamma doses ranging from threshold to high exposures are potential candidate for dosimetry applications.

36 MATERIALS SCIENCE↗

Nanocrystalline K{sub 2}Ca{sub 2}(SO{sub 4}){sub 3}: Eu for proton beam dosimetry

This paper investigates the Thermoluminescent response of nanocrystalline K{sub 2}Ca{sub 2}(SO{sub 4}){sub 3}: Eu, prepared by Co-precipitation technique to 150 MeV proton beam. The particle size was calculated to be 45 nm by the broadening of the XRD peaks using Scherrer's formula. Samples in the form of pellets were irradiated by 150 MeV proton beam with dose range of 0.1 Gy to 325 Gy. Thermoluminescence (TL) glow curves of the irradiated samples were recorded and studied. It has been found that the phosphor shows a characteristic single peak at around 420 K. The TL response is linear in the range upto 200 Gy and then saturates for higher doses. The wider linear TL response of nanocrystalline K{sub 2}Ca{sub 2}(SO{sub 4}){sub 3}: Eu and low fading makes it a superior candidate as a dosimeter to be used for detecting the doses of protons beams for its various applications in the field of space, therapy and research.

36 MATERIALS SCIENCE↗

Thermoluminescence of Eu activated LiF nanophosphors

Nanocrystalline lithium fluoride (LiF) phosphors prepared by the chemical co-precipitation method at 8.00 pH value have been activated with Eu (0.01, 0.03, 0.07 and 0.1%nt;) as single dopants. The formation of nanocrystalline structure has been confirmed by X-ray diffraction. Thermolumniscence (TL) properties of LiF: Eu nano-phosphors irradiated with gamma rays at different doses of 100 Gy - 10 kGy have been further studied. There is only one main glow peak at around 122 deg. C; which shifts to higher temperature with an increase in doping concentration at all studied irradiation doses. However, the glow peak shifts to lower temperature with an increase in irradiation dose from 100 Gy to 10 kGy. The LiF nano-crystallites synthesized at 8.00 pH and activated with 0.03%nt; Eu are found to have maximum TL sensitivity at studied gamma doses.

36 MATERIALS SCIENCE↗

Size-dependent emission efficiency and luminescence characteristics of YBO{sub 3}:Tb{sup 3+} nanocrystals under vacuum ultraviolet excitations

The luminous efficiency and lifetime of plasma display panels (PDPs) are directly related to the performance of phosphors used in PDPs, thus higher efficiency, higher stability against high temperature processes, and a long lifetime along with good color chromaticity against vacuum-ultraviolet radiation are major concerns in selecting suitable phosphors for PDPs. In the same pursuit, well crystallized pure hexagonal phase YBO{sub 3}:Tb{sup 3+} nanocrystals were prepared using co-precipitation method. The prepared YBO{sub 3}:Tb{sup 3+} nanocrystals showed bright green luminescence, color chromaticity (0.21, 0.61), and could be assigned to {sup 5}D{sub 4}{yields}{sup 7}F{sub j} transitions (j = 2-6) due to electric dipole-dipole interaction of Tb{sup 3+} ions. The vacuum ultraviolet photoluminescence spectroscopy of the prepared YBO{sub 3}:Tb{sup 3+} nanocrystals showed size dependent nonlinear luminescence enhancement with relatively shorter life time as compared to the commercial bulk YBO{sub 3}:Tb{sup 3+} phosphor. The quenching concentration of Tb{sup 3+} doping for ({sup 5}D{sub 4}{yields}{sup 7}F{sub 5}) transition was found significantly enhanced with the decrease in particle size suggesting it an ideal green phosphor for plasma display panels. The possible explanation for size-dependent emission efficiency and observed luminescence characteristics were proposed via charge transfer process and lowering of the structural symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CaMoO{sub 4}:Tb-Fe{sub 3}O{sub 4} hybrid nanoparticles for luminescence and hyperthermia applications

We have prepared CaMoO{sub 4}:Tb-Fe{sub 3}O{sub 4} hybrid nanoparticles by co-precipitation and polyol method. Their temperature kinetics for hyperthermia temperature {approx}43 Degree-Sign C under different applied AC fields and the luminescence properties under UV-radiation are investigated. A strong green emission is observed due to the presence of Tb{sup 3+} ions.

36 MATERIALS SCIENCE↗

TL kinetics study of LiF nanophosphors for high exposures of gamma-rays

We report the thermoluminescence (TL) kinetics study of LiF nanophosphors synthesized by chemical co-precipitation at 8.00 pH and exposed to high gamma dose. XRD and TEM studies confirm the formation of single phase LiF nanophosphors. TL properties of LiF phosphors irradiated with gamma rays at different doses of 100 Gy - 70 KGy shows a major peak around 395 K in addition to other low intensity peaks. The major peak in the TL glow curve is almost resolved from other peaks, which has been analyzed using Chen's peak shape method to determine the TL kinetic parameters. TL intensity almost increases linearly with gamma dose, however TL glow curve shift slightly to lower temperature values as a function of gamma exposure.

36 MATERIALS SCIENCE↗

Structural and multiferroic properties of YMnO{sub 3} ceramics synthesized by co-precipitation method

Single phased hexagonal YMnO{sub 3} (YMO) ceramics have been synthesized via soft chemical co-precipitation route and adopting different sintering conditions. From the X-ray diffraction analysis, ceramic powder sintered at 600 Degree-Sign C was found to be amorphous. Sintering at 1000 Degree-Sign C lead to the formation of single phase YMO belonging to the noncentrosymmetric P6{sub 3}cm space group. Further, dielectric, Leakage and magnetic studies were performed at room temperature.

36 MATERIALS SCIENCE↗

Impedance response and dielectric relaxation in co-precipitation derived ferrite (Ni,Zn)Fe{sub 2}O{sub 4} ceramics

Dielectric spectra and magnetization hysteresis loops were used to investigate the grain size effect with temperature on the electrical and magnetic response of co-precipitation derived spinel (Ni{sub 0.5}Zn{sub 0.5})Fe{sub 2}O{sub 4} (NZFO) ceramics. Remarkable dielectric relaxation phenomena of non-Debye type have been observed in each NZFO ceramics as confirmed by two kinds of Cole-Cole plots of the 1100 Degree-Sign C sintered samples, mainly due to the electron-hopping mechanism between n-type and p-type carriers and interfacial ion effect when applied an increase of temperature. The high and low response of grain and grain-boundary regions were determined by modeling the impedance experimental results on two equivalent RC circuits taking into account grain deep trap states. By employing the modified Arrhenius equation, activation energy values of different sintering temperatures were calculated and analyzed in combination with oxygen vacancy. In addition, the magnetization of various sintering temperature samples is dominated by cation distribution and surface effect in different particle ranges.

36 MATERIALS SCIENCE↗

Synthesis and structural characterization of CZTS nanoparticles

The CZTS nanoparticles were successfully synthesized by Chemical co-precipitation method with different pH values in the range of 6 to 8. The synthesized nanoparticles were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. XRD studies revealed that the CZTS nanoparticles exhibited Kesterite Structure with preferential orientation along the (112) direction. Sample at pH value of 7 reached the nearly stoichiometric ratio.

36 MATERIALS SCIENCE↗

Structural and topographical analysis of Nd:Gd{sub 2}O{sub 3} nanorods

Nanocrystalline form of pure and Nd doped gadolinium hydroxide [Nd:Gd(OH({sub 3}] nanorods were successfully synthesized at 60 Degree-Sign C through simple co-precipitation method of Gd(NO{sub 3}){sub 3}.6H{sub 2}O and Nd(NO{sub 3}){sub 3}.6H{sub 2}O solutions with a specified pH, adjusted using NH{sub 3} as buffer solution. The dopant percentage was maintained at 5%. The as-synthesized Gd(OH){sub 3} and Nd:Gd(OH({sub 3} nanorods were annealed at 500 Degree-Sign C for 1 h to form the respective Gd{sub 2}O{sub 3} and Nd:Gd{sub 2}O{sub 3} nanorods. Powder X-ray diffraction (XRD) pattern, scanning electron microscopy with energy dispersive X-ray (SEM/EDX) and high-resolution transmission electron microscopy (HRTEM) analyses were used to characterize these as-synthesized [Gd(OH){sub 3} and Nd:Gd(OH({sub 3}] and annealed [Gd{sub 2}O{sub 3} and Nd:Gd{sub 2}O{sub 3}] nanorods.

36 MATERIALS SCIENCE↗

Magnetic nanoparticles for medical applications: Progress and challenges

Magnetic nanoparticles present unique properties that make them suitable for applications in biomedical field such as magnetic resonance imaging (MRI), hyperthermia and drug delivery systems. Magnetic hyperthermia involves heating the cancer cells by using magnetic particles exposed to an alternating magnetic field. The cell temperature increases due to the thermal propagation of the heat induced by the nanoparticles into the affected region. In order to increase the effectiveness of the treatment hyperthermia can be combined with drug delivery techniques. As a spectroscopic technique MRI is used in medicine for the imaging of tissues especially the soft ones and diagnosing malignant or benign tumors. For this purpose Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} ferrite nanoparticles with x between 0 and 1 have been prepared by co-precipitation method. The cristallite size was determined by X-ray diffraction, while the transmission electron microscopy illustrates the spherical shape of the nanoparticles. Magnetic characterizations of the nanoparticles were carried out at room temperature by using a vibrating sample magnetometer. The specific absorption rate (SAR) was measured by calorimetric method at different frequencies and it has been observed that this value depends on the chemical formula, the applied magnetic fields and the frequency. The study consists of evaluating the images, obtained from an MRI facility, when the nanoparticles are dispersed in agar phantoms compared with the enhanced ones when Omniscan was used as contrast agent. Layer-by-layer technique was used to achieve the necessary requirement of biocompatibility. The surface of the magnetic nanoparticles was modified by coating it with oppositely charged polyelectrolites, making it possible for the binding of a specific drug.

60 APPLIED LIFE SCIENCES↗