Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONTAMINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Spatial and temporal trends in contaminant concentrations in Hexagenia nymphs following a coal ash spill at the Tennessee Valley Authority's Kingston Fossil Plant

A dike failure at the Tennessee Valley Authority Kingston Fossil Plant in East Tennessee, United States, in December 2008, released approximately 4.1 million m(3) of coal ash into the Emory River. From 2009 through 2012, samples of mayfly nymphs (Hexagenia bilineata) were collected each spring from sites in the Emory, Clinch, and Tennessee Rivers upstream and downstream of the spill. Samples were analyzed for 17 metals. Concentrations of metals were generally highest the first 2 miles downstream of the spill, and then decreased with increasing distance from the spill. Arsenic, B, Ba, Be, Mo, Sb, Se, Sr, and V appeared to have strong ash signatures, whereas Co, Cr, Cu, Ni, and Pb appeared to be associated with ash and other sources. However, the concentrations for most of these contaminants were modest and are unlikely to cause widespread negative ecological effects. Trends in Hg, Cd, and Zn suggested little (Hg) or no (Cd, Zn) association with ash. Temporal trends suggested that concentrations of ash-related contaminants began to subside after 2010, but because of the limited time period of that analysis (4 yr), further monitoring is needed to verify this trend. The present study provides important information on the magnitude of contaminant exposure to aquatic receptors from a major coal ash spill, as well as spatial and temporal trends for transport of the associated contaminants in a large open watershed.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2019

Environmental Risk of Metal Contamination in Sediments of Tropical Reservoirs

Reservoir sediment can work as both sink and source for contaminants. Once released into the water column, contaminants can be toxic to biota and humans. We investigate potential ecological risk to benthic organisms by metals contamination in six reservoirs in Southeast Brazil. Results of the bioavailable fraction of copper (Cu), chromium (Cr), cadmium (Cd), lead (Pb), zinc (Zn), and iron (Fe) in sediment samples are presented. Considering Cu, Cd, and Zn concentrations, about 6% of the samples exceeded the threshold effect levels of sediment quality guidelines. The comparison to sediment quality guidelines is conservative because we used a moderate metal extraction. Control of contaminant sources in these reservoirs is key because they are sources of water and food. The mixture toxicity assessment showed an increased incidence of toxicity to aquatic organisms showing that mixture toxicity should be taken into account in sediment assessment criteria.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Phosphate amendments for chemical immobilization of uranium in contaminated soil

Uranium (U) contamination is a major environmental problem associated with the mining and processing of nuclear materials for both weapons and power production. When possible, in situ soil remediation techniques are preferable for reducing the risk associated with diffuse low-level U contamination. Uranium is known to form sparingly soluble phosphate compounds that persist in the environment. Therefore, batch experiments were performed to evaluate the efficacy of three phosphate amendments, hydroxyapatite (HA), sodium phytate (IP6) and sodium tripolyphosphate (TPP), to immobilize U in contaminated sediments. The amendments were added at equivalent phosphorus (P) concentrations and then equilibrated under a range of test conditions, with changes in soluble U and Ptotal monitored at pre-set time intervals. Only HA was effective at reducing the soluble U soil fraction when compared to the control, with IP6 and TPP increasing the soluble U soil fraction. After equilibration, changes in contaminant partitioning in the amended sediments were evaluated using operational extraction methods. Sequential extraction results for HA generally indicated a transfer of U from labile to more recalcitrant phases, while the results for IP6 and TPP were more ambiguous.

Uranyl↗
DOE OSTI2017

Changes in the wettability of polymer electrolyte fuel cells components during cationic contamination and mitigation

Foreign cations are shown to cause mass transport losses, in particular due to wettability changes in the micro-porous layers (MPL) and the carbon paper substrate, and have a major impact on the durability and the performance of polymer electrolyte fuel cells. Here we studied the effects of cationic impurities on fuel cell system performance, especially on the water management by employing in-situ and ex-situ contamination methods. Changes in the wettability of the carbon paper surface following the in-situ contamination injection were quantified using the Wilhelmy plate method. The CaSO 4 precipitation on the macro-pores of the carbon paper substrate after the contamination injection causes a higher wettability leading to increased flooding of the carbon paper substrate and consequent mass transport losses. An ex-situ cleaning with an acid solution is shown to be very effective in removing the salt deposits of the carbon paper substrate. During the mitigation, the highly hydrophobic MPL acts as a barrier to the transport of the recovery solution into the membrane-electrode assembly (MEA), therefore isopropanol (IPA) was added to both the contaminant solution and the recovery solution to increase the wettability of the MPL. Wetting force measurements confirm that the added IPA can alter the wettability of the MPL and can render it fully hydrophilic, enabling the transport of the recovery solution into the MEA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Environmental impact of ongoing sources of metal contamination on remediated sediments

One challenge to all remedial approaches for contaminated sediments is the continued influx of contaminants from uncontrolled sources following remediation. We investigated the effects of ongoing contamination in mesocosms employing sediments remediated by different types of active and passive caps and in-situ treatment. Our hypothesis was that the sequestering agents used in active caps and in situ treatment will bind elements (arsenic, chromium, cadmium, cobalt, copper, nickel, lead, selenium, and zinc) from ongoing sources thereby reducing their bioavailability and protecting underlying remediated sediments from recontamination. Most element concentrations in surface water remained significantly lower in mesocosms with apatite and mixed amendment caps than in mesocosms with passive caps (sand), uncapped sediment, and spike solution throughout the 2520 hour experiment. Element concentrations were significantly higher in Lumbriculus variegatus from untreated sediment than in Lumbriculus from most active caps. Moreover, Pearson correlations between element concentrations in Lumbriculus and metal concentrations in the top 2.5 cm of sediment or cap measured by diffusive gradient in thin films (DGT) sediment probes were generally strong (as high as 0.98) and significant (p<0.05) for almost all tested elements. Metal concentrations in both Lumbriculus and sediment/cap were lowest in apatite, mixed amendment, and activated carbon treatments. Finally, these findings show that some active caps can protect remediated sediments by reducing the bioavailable pool of metals/metalloids in ongoing sources of contamination.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Evaluating Exposures of Bay Mussels (Mytilus trossulus) to Contaminants of Emerging Concern through Environmental Sampling and Hydrodynamic Modeling.

Bay mussels (Mytilus trossulus) were transplanted to 18 locations representing a range of potential exposures throughout Puget Sound, WA. Tissues were analyzed for over 200 organic contaminants. Results indicated the widespread exposure of marine organisms to trace levels of organic contaminants including the synthetic opioid oxycodone, present at three urban sites, and the chemotherapy drug melphalan, present at nine locations, at levels that may be of biological concern. Land-use and wastewater outfalls were evaluated as potential sources of CECs to the nearshore. Exposure to alkylphenol ethoxylates was associated with increased impervious surfaces in upland watersheds. A hydrodynamic simulation was performed using the Salish Sea Model to integrate inputs from 99 wastewater sources to Puget Sound. Predictions were consistent with concentrations of several wastewater-associated contaminants and d15N enrichment. These results support the notion that Puget Sound nearshore biota suffer chronic exposures to a suite of contaminants from multiple sources and provide critical to focus future monitoring and management.

toxic contamination, Salish Sea, Sish Sea Model, m↗
DOE OSTI2018

Characterizing Technetium in Subsurface Sediments for Contaminant Remediation

Technetium-99 (Tc) contamination remains a major environmental problem at legacy nuclear reprocessing sites, including the Hanford Site (Washington State, USA) where ~700 Ci of Tc has been released into the subsurface. The environmental risk associated with Tc is due to its long half-life (213,000 years) and high mobility of the oxidized anionic pertechnetate species, Tc(VII)O 4 - , which warranted the US Department of Energy to identify Tc as a primary contaminant of concern. This risk generates a critical need to resolve scientific and technical issues underpinning the ability to safely, cost-effectively, and efficiently remediate Tc-contaminated vadose zone sediments and groundwater and mitigate risk to human health and the environment. Developing enhanced attenuation and efficient remediation strategies for released Tc requires a complete understanding of retardation processes and Tc mass flux, including the different mechanisms by which Tc is immobilized in the subsurface and the effect of localized subsurface conditions. Selection of over 30 sediments from Hanford waste disposal sites, based on historical information and sediment characterization, for analysis by autoradiography revealed that Tc concentrations were generally below the detection limit of 5 mg Tc/g sediment. When Tc was measurable in vadose zone sediments, it was predominantly present as TcO 4 - in water films associated with fine-grained sediments, with a maximum of 12 % of the total Tc present in the acid-extractable fraction, defined here as the immobile fraction. However, beneath one waste disposal site, where sediments containing minerals with reducing capacity intercepted miscellaneous fission product recovery waste and waste from the bismuth phosphate process, the amount of Tc present in the immobile fraction was 53 % of the total. Characterization of Tc-containing phases present in these field-contaminated sediments for the first time using Tc K-edge X-ray absorption near edge structure spectroscopy revealed that, as well as Tc present as Tc(VII)O 4 - in pore water associated with fine-grained sediments, Tc was also: (i) physically encapsulated within solid phases precipitated from other waste components and in multi-component phosphate minerals; and (ii) present as mixed Tc(VII)/Tc(IV) in localized reducing zones. These results will be used to develop improved long-term Tc remediation strategies optimized for field application, through stimulation of conditions that enhance Tc attenuation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

From Pure to Seawater Electrolysis: Unveiling the Impact of Ionic Species and Contaminants on Electrocatalysis

Water electrolysis, including seawater splitting to produce hydrogen and oxygen, stands as a promising approach for the efficient storage of intermittent energy. However, the half-reactions of water splitting, the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), are known to be very sensitive toward the quality of water employed and are susceptible to contaminants originating from various sources, including the electrolyte or the electrodes. Those contaminants have a profound impact on the activity of these reactions of water splitting by modifying the electronic and physical structures of electrocatalysts as well as electrode–electrolyte interfaces. For seawater electrolysis, the unintentional presence of impurities, such as anions, cations, and organic compounds, affects the catalyst stability, selectivity, and activity. Despite the existence of numerous comprehensive reviews that delve into various aspects of catalysts and their structure–property relationships for several electrocatalytic reactions, the impact of contaminants has often been ignored. This critical review endeavors to address this issue by providing an overview of the diverse sources of contaminants influencing electrocatalytic water splitting and seawater splitting reactions, delineating the trends in electrochemical parameters and detailing different characterization methods for elucidating the physical and electronic changes of the electrode and electrolyte.

HER↗
DOE OSTI2022

Treatment of emerging contaminants in simulated wastewater via tandem photo-Fenton-like reaction and nutrient recovery

We report a tandem strategy that recovers NH 4 + and PO 4 3- nutrients from simulated wastewater in a solid form after the Fenton oxidation of emerging organic contaminants was developed. Mesoporous Cu–MgO nanoparticles were used as a photo-Fenton-like catalyst to oxidize paraoxon and tetracycline present in nutrient-rich simulated wastewater to prevent their incorporation into the struvite product. Mesoporous MgO nanoparticles were subsequently used as the Mg-source for the struvite crystallization due to the fast intraparticle diffusion and adsorption kinetics facilitated by their porosity and the high surface area. Without Fenton oxidation, 13% of paraoxon and 37% of tetracycline were incorporated into the struvite, demonstrating the clear need for the removal of hazardous contaminants before struvite synthesis. Both organic contaminants were eliminated using the Fenton oxidation reaction, with some minor non-toxic intermediate products formed. The product formed after the tandem process was shown by XRD and Raman spectroscopy to be struvite free of the emerging organic contaminants.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

From legacy contamination to watershed systems science: a review of scientific insights and technologies developed through DOE-supported research in water and energy security

Abstract Water resources, including groundwater and prominent rivers worldwide, are under duress because of excessive contaminant and nutrient loads. To help mitigate this problem, the United States Department of Energy (DOE) has supported research since the late 1980s to improve our fundamental knowledge of processes that could be used to help clean up challenging subsurface problems. Problems of interest have included subsurface radioactive waste, heavy metals, and metalloids (e.g. uranium, mercury, arsenic). Research efforts have provided insights into detailed groundwater biogeochemical process coupling and the resulting geochemical exports of metals and nutrients to surrounding environments. Recently, an increased focus has been placed on constraining the exchanges and fates of carbon and nitrogen within and across bedrock to canopy compartments of a watershed and in river–floodplain settings, because of their important role in driving biogeochemical interactions with contaminants and the potential of increased fluxes under changing precipitation regimes, including extreme events. While reviewing the extensive research that has been conducted at DOE’s representative sites and testbeds (such as the Oyster Site in Virginia, Savannah River Site in South Carolina, Oak Ridge Reservation in Tennessee, Hanford in Washington, Nevada National Security Site in Nevada, Riverton in Wyoming, and Rifle and East River in Colorado), this review paper explores the nature and distribution of contaminants in the surface and shallow subsurface (i.e. the critical zone) and their interactions with carbon and nitrogen dynamics. We also describe state-of-the-art, scale-aware characterization approaches and models developed to predict contaminant fate and transport. The models take advantage of DOE leadership-class high-performance computers and are beginning to incorporate artificial intelligence approaches to tackle the extreme diversity of hydro-biogeochemical processes and measurements. Recognizing that the insights and capability developments are potentially transferable to many other sites, we also explore the scientific implications of these advances and recommend future research directions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Oxygen K -edge X-ray absorption spectra of liquids with minimization of window contamination

We report oxygen K-edge X-ray absorption spectroscopy is used routinely to study a range of solid materials. However, liquid samples are studied less frequently at the oxygen K-edge due to the combined challenges of high-vacuum conditions and oxygen contamination of window materials. A modular sample holder design with a twist-seal sample containment system that provides a simple method to encapsulate liquid samples under high-vacuum conditions is presented. This work shows that pure silicon nitride windows have lower oxygen contamination than both diamond- and silicon-rich nitride windows, that the levels of oxygen contamination are related to the age of the windows, and provides a protocol for minimizing the background oxygen contamination. Acid-washed 100 nm-thick silicon nitride windows were found to give good quality oxygen K-edge data on dilute liquid samples.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Development of an Electrochemical Hydrogen Contaminant Detector

Hydrogen refueling stations (HRSs) that dispense hydrogen to fuel cell vehicles need to ensure the quality of hydrogen to avoid contamination of the vehicle’s expensive fuel cell stacks. Currently, stations verify their fuel quality only periodically to ensure that they meet the strict fuel quality standards specified by either International Organization for Standards (ISO) or Society for Automotive Engineers (SAE). The development of hydrogen contaminant detectors (HCDs) that can provide low cost continuous monitoring at the HRS can be an invaluable asset in protecting fuel cell vehicles from any fuel contamination in-between infrequent expensive analysis of hydrogen fuel quality. An HCD capable of detecting < 200 ppb of CO in hydrogen is presented in this paper. The HCD is based on an electrochemical hydrogen pumping cell whose ultra-low loaded working electrode is poisoned by the contaminant, thus reducing its hydrogen oxidation reaction rate. The hydrogen pumping cell consists of a Nafion® membrane, a sputtered Pt working electrode, a Pt/Ru counter/pseudo-reference electrode and an internal water wicking system that provides humidification to the membrane and electrodes. When this HCD is operated in a pulsed voltammetry mode, it can provide stable CO response for thousands of hours in a HRS.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

Effect of System Contaminants on the Performance of a Proton Exchange Membrane Fuel Cell

The performance loss and recovery of the fuel cell due to Balance of Plant (BOP) contaminants was identified via a combination of experimental data and a mathematical model. The experiments were designed to study the influence of organic contaminants (e.g. those from BOP materials) on the resistance of the catalyst, ionomer and membrane, and a mathematical model was developed that allowed us to separate these competing resistances from the data collected on an operating fuel cell. For this reason, based on the functional groups, four organic contaminants found in BOP materials, diethylene glycol monoethyl ether (DGMEE), diethylene glycol monoethyl ether acetate (DGMEA), benzyl alcohol (BzOH) and 2,6-diaminotoluene (2,6-DAT) were infused separately to the cathode side of the fuel cell. The cell voltage and high frequency impedance resistance was measured as a function of time. The contaminant feed was then discontinued and voltage recovery was measured. It was determined that compounds with ion exchange properties like 2,6-DAT can cause voltage loss with non-reversible recovery, so this compound was studied in more detail. Finally, the degree of voltage loss increased with an increase in concentration, and/or infusion time, and increased with a decrease in catalyst loadings.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2018

Small RNA profiling of low biomass samples: identification and removal of contaminants

Here, sequencing-based analyses of low-biomass samples are known to be prone to misinterpretation due to the potential presence of contaminating molecules derived from laboratory reagents and environments. DNA contamination has been previously reported, yet contamination with RNA is usually considered to be very unlikely due to its inherent instability. Small RNAs (sRNAs) identified in tissues and bodily fluids, such as blood plasma, have implications for physiology and pathology, and therefore the potential to act as disease biomarkers. Thus, the possibility for RNA contaminants demands careful evaluation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Monitoring Potential Transport of Radioactive Contaminants in Shallow Ephemeral Channels: FY2019

Desert Research Institute (DRI) conducted a field assessment of the potential for contaminated soil to be transported from the Smoky Site Contamination Area (CA) because of storm runoff. This activity supported U.S. Department of Energy (DOE) Environmental Management Nevada Program (EM NV) efforts to establish post-closure monitoring plans for the Smoky Site Soils Corrective Action Unit (CAU) 550. The work was intended to confirm the likely mechanism of transport and determine the meteorological conditions that might cause the movement of contaminated soils, as well as determine the particle size fraction most closely associated with transported radionuclide-contaminated soils. These data will facilitate the design of the appropriate post-closure monitoring program. In 2011, DRI installed a meteorological monitoring station on the west side of the Smoky Site CA and a hydrologic (runoff) monitoring station within the CA, near the east side. The meteorological station collected air temperature, wind speed, wind direction, relative humidity, precipitation, solar radiation, barometric pressure, soil temperature, and soil water content data. The maximum, minimum, and average or total values (as appropriate) for each of these parameters were recorded for each 10-minute interval. The maximum, minimum, and average water depth in the flume installed at the hydrologic station were also recorded for each 10-minute interval. This report presents the data collected from these stations during fiscal year (FY) 2019. During the FY2019 reporting period, the warmest months were June, July, and August and the coldest were December and February. The highest monthly solar radiation (i.e., sunshine) values were recorded in June, July, and August, whereas December through February had the lowest solar radiation values. Monthly mean wind speeds were highest in the spring (April) and early summer (June). Winds were predominantly from the north, except in February, July, August, and September when winds were mostly from the west. The monthly average relative humidity ranged from 17 percent to approximately 60 percent. Humidity was lowest in the summer and highest in the winter. Monthly total precipitation ranged from 0.0 during August and September to 2.22 inches (in) (56.39 millimeters [mm]) in February. Total precipitation for FY2019 was 7.83 in (198.88 mm). During the reporting period, a single, nonzero, flow event was recorded at the flume. This occurred over two days between March 6 and 7, 2019, in response to 1.16 in (29.46 mm) of precipitation falling within 9.3 hours on March 6, 2019. This event produced a peak water depth of 0.39 in (0.99 centimeters [cm]) in the flume, and runoff was measured for approximately 23.5 hours. However, the maximum recorded flow depth was less than the limit for flow discharge and velocity that can be calculated for the six-inch (15 cm) throat of a Parshall flume. The runoff event produced insufficient flow velocities through the natural channel to cause local erosion and transport of bedload materials. No bedload samples were collected for radiological analysis. Observing meteorological and environmental conditions that lead to storm runoff will help identify the parameters and threshold conditions that should be incorporated into post-closure monitoring plans for this and similar Soils CAU sites. Routine monitoring of meteorological and hydrologic parameters at the Smoky Site CA has been discontinued at the request of EM NV, effective at the conclusion of FY2019. Environmental data acquisition was completed and the meteorological and runoff monitoring stations were removed from the Smoky Site on October 15, 2019.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Analysis of Potential Airborne Radionuclide Emissions During and After Fires Through Contaminated Soil Areas on the INL

Analysis of Potential Airborne Radionuclide Emissions During and After Fires Through Contaminated Soil Areas on the INL Wildfires on the INL have heightened concerns that such fires could burn through radiologically contaminated soil areas and could potentially pose a hazard to firefighters and the public. Exposure to windblown contaminated dust from fire-denuded landscapes is another concern. This report re-examines the potential for fire and dust releases from the six previously identified and posted (radiological) soil contamination areas (SCAs), as well as the one Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) site not posted as SCAs that were identified in the original 2001 revision of this report. Releases and their consequences, during and after fires are analyzed in detail for the SCAs and the one CERCLA site near INL facilities.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2023

Laser-Induced Fluorescence for Monitoring Environmental Contamination and Stress in the Moss Thuidium plicatile

The ability to detect, measure, and locate the source of contaminants, especially heavy metals and radionuclides, is of ongoing interest. A common tool for contaminant identification and bioremediation is vegetation that can accumulate and indicate recent and historic pollution. However, large-scale sampling can be costly and labor-intensive. Hence, non-invasive in-situ techniques such as laser-induced fluorescence (LIF) are becoming useful and effective ways to observe the health of plants through the excitation of organic molecules, e.g., chlorophyll. The technique presented utilizes images collected of LIF in moss to identify different metals and environmental stressors. Analysis through image processing of LIF response was key to identifying Cu, Zn, Pb, and a mixture of the metals at nmol/cm 2 levels. Specifically, the RGB values from each image were used to create density histograms of each color channel’s relative pixel abundance at each decimal code value. These histograms were then used to compare color shifts linked to the successful identification of contaminated moss samples. Photoperiod and extraneous environmental stressors had minimal impact on the histogram color shift compared to metals and presented with a response that differentiated them from metal contamination.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2020

International Space Station (ISS) Thruster Plume Contamination and Erosion Control for Visiting Spacecraft

The ISS is the largest and most complex platform for space science utilization in low Earth orbit. Multiple sites for external payloads, with exposure to the associated natural and induced environments, are available to support a variety of space science utilization objectives. Contamination is one of the induced environments that can impact performance, mission success, and science utilization on the vehicle. The ISS has been designed, built, and integrated with strict contamination requirements to provide low levels of induced contamination both on the ISS vehicle’s own contamination-sensitive surfaces and on external payload assets.

Microscopy↗