Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CM process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Plasma Deposited SiO2 for Planar Self-Aligned Gate Metal-Insulator-Semiconductor Field Effect Transistors on Semi-Insulating InP

Metal-insulator-semiconductor (MIS) field effect transistors were fabricated on InP substrates using a planar self-aligned gate process. A 700-1000 A gate insulator of Si02 doped with phosphorus was deposited by a direct plasma enhanced chemical vapor deposition at 400 mTorr, 275 C, 5 W, and power density of 8.5 MW/sq cm. High frequency capacitance-voltage measurements were taken on MIS capacitors which have been subjected to a 700 C anneal and an interface state density of lxl0(exp 11)/eV/cq cm was found. Current-voltage measurements of the capacitors show a breakdown voltage of 107 V/cm and a insulator resistivity of 10(exp 14) omega cm. Transistors were fabricated on semi-insulating InP using a standard planar self-aligned gate process in which the gate insulator was subjected to an ion implantation activation anneal of 700 C. MIS field effect transistors gave a maximum extrinsic transconductance of 23 mS/mm for a gate length of 3 microns. The drain current drift saturated at 87.5% of the initial current, while reaching to within 1% of the saturated value after only 1x10(exp 3). This is the first reported viable planar InP self-aligned gate transistor process reported to date.

Tabory, Charles N.↗
NASA NTRS1982

Interaction between cast silicon properties and solar cell performance

Three types of cast silicon, Silso, HEM (Heat-Exchanger Method) and UCP (Ubiquitous Crystallization Process) were studied for their use as solar cells. Optical microscopy after etching revealed a high density of uniform dislocations (approaching 1,000,000/sq cm), lines of dislocations indicating stress during crystal growth, and precipitates, some of which generate dislocations. Solar cells were fabricated by three processes. Results of solar cell processing revealed that these materials produce cells of lower efficiency than Czochralski control cells, and that the efficiencies of the three materials were quite close. Diffusion length and spectral response data are shown. Certain structural features are correlated with solar cell efficiency, diffusion length, and spectral response. Electron-beam induced current (EBIC) and light spot scanning are used to back up other measurements.

Hyland, S.↗
NASA NTRS1978

Evaluation of selected chemical processes for production of low-cost silicon, phases 1 and 2

A miniplant, consisting of a 5 cm-diameter fluidized-bed reactor and associated equipment was used to study the deposition parameters, temperature, reactant composition, seed particle size, bed depth, reactant throughput, and methods of reactant introduction. It was confirmed that the permissible range of fluidized-bed temperature was limited at the lower end by zinc condensation (918 C) and at higher temperatures by rapidly decreasing conversion efficiency. Use of a graded bed temperature was shown to increase the conversion efficiency over that obtained in an isothermal bed. Other aspects of the process such as the condensation and fused-salt electrolysis of the ZnCl2 by-product for recycle of zinc and chlorine were studied to provide information required for design of a 50 MT/year experimental facility. In view of the favorable technical and economic indications obtained, it was recommended that construction and operation of the 50 MT/year experimental facility be implemented.

Blocher, J. M.↗
NASA NTRS1989

The spatial scales and rise times of impulsive solar burst sources

During the rise time of an impulsive solar burst of hard X-rays and microwaves, energy release overwhelms losses so that the characteristics of the flare energy release process are best displayed. A sample of 30 bursts was analyzed, and the rise times of the bursts were compared with their source length scales. The result, as in earlier work employing the 'thermal conduction-front' model, is that the burst length scales were linerly proportional to their rise times, and ranged from 5.4 x 10 to the 6th to 3.6 x 10 to the 9th cm. This proportionality places a new and restrictive condition upon the possible energy release processes. The new condition is especially powerful because the proportionality was formerly believed to depend on the thermal source model alone, but now is known to follow from every model in current use.

Batchelor, David↗
DOE OSTI2026

Cation Data for the East River Watershed, Colorado (2014-2025)

This data package contains mean values for cation concentration for water samples taken from the East River Watershed in Colorado. Inductively coupled plasma mass spectrometry (ICP-MS) has been used to measure the concentrations of elements of interest simultaneously for the East River Watershed, Colorado groundwater and surface water samples to inform insights on the biogeochemistry processes within the watershed. The East River is part of the Watershed Function Scientific Focus Area (WFSFA) located in the Upper Colorado River Basin, United States. For samples collected prior to 06-16-2021, the instrumentation, Elan DRC II, PerkinElmer SCIEX, automatically switches among the three models necessary to analyze all 37 elements. These 37 elements include: (1) Lithium (Li), Beryllium (Be), Boron (B), Sodium (Na), Magnesium (Mg), Aluminium (Al), Silicon (Si), Phosphorus (P), Titanium (Ti), Cobalt (Co), Nickel (Ni), Copper (Cu), Zinc (Zn), Germanium (Ge), Arsenic (As), Rubidium (Rb), Strontium (Sr), Zirconium (Zr), Molybdenum (Mo), Silver (Ag), Cadmium (Cd), Tin (Sn), Antimony (Sb), Caesium (Cs), Barium (Ba), Europium (Eu), Lead (Pb), Thorium (Th), Uranium (U) using standard model, argon Ar as reaction gas, (2) Potassium (K), Calcium (Ca), Vanadium (V), Chromium (Cr), Manganese (Mn), Iron (Fe) using dynamic reaction cell (DRC) model, ammonia NH3 as reaction gas, and (3) Phosphorus (P) and Selenium (Se) using DRC model, oxygen O2 as reaction gas. Note for the samples with higher concentrations of chloride (Cl-), asenic (As) concentrations were analysed with DRC model (oxygen O2 as reaction gas) to avoid the interference of chloride. For samples collected on and after 06-16-2021, an advanced Agilent 8900 triple quadrupole inductively coupled plasma mass spectrometry system (Agilent 8900 QQQ ICP-MS, Agilent Technologies) has been used to measure the concentrations of interested 36 elements simultaneously for environmental samples, including (1) Lithium (Li), Beryllium (Be) and Boron (B) using standard no gas mode, (2) Sodium (Na), Magnesium (Mg), Aluminium (Al) Phosphorus (P), Potassium (K), Chromium (Cr), Manganese (Mn), Iron (Fe), Cobalt (Co), Nickel (Ni), Copper (Cu), Zinc (Zn), Germanium (Ge), Arsenic (As), Rubidium (Rb), Strontium (Sr), Zirconium (Zr), Molybdenum (Mo), Silver (Ag), Cadmium (Cd), Tin (Sn), Antimony (Sb), Cesium (Cs), Barium (Ba), Europium (Eu), Lead (Pb), Thorium (Th) and Uranium (U) using standard helium (He) collision mode, (3) Titanium (Ti) and Vanadium (V) using high Energy (HEHe) helium (He) collision mode, and (4) Silicon (Si), Calcium (Ca) and Selenium (Se) using standard H2 reaction mode. All samples were prepared/diluted with 2% (v/v) ultrapure nitric acid in Milli-Q water (18.2 mega ohm-cm), and analyzed under a rigorous quality assurance and quality control (QA/QC) process. This data package contains (1) a zip file (cation_data_2014_2025.zip) containing a total of 5,849 files: 5.848 data files of cation data from across the Lawrence Berkeley National Laboratory (LBNL) Watershed Function Scientific Focus Area (SFA) which is reported in .csv files per location and a locations.csv (1 file) with latitude and longitude for each location; (2) a file-level metadata (v6_20260901_flmd.csv) file that lists each file contained in the dataset with associated metadata; (3) a data dictionary (v6_20260901_dd.csv) file that contains terms/column_headers used throughout the files along with a definition, units, and data type; (4) PDF and docx files for the detemination of Method Detection Limits (MDLs) for ICP-MS PerkinElmer DRC II instrumentation (Detemination_of_Method_Detection_Limits__MDLs__for_ICP_MS__PerkinElmer_Elan_DRC_II__LBL_Bldg74_Lab214D) for samples before November 2021; (5) PDF and docx files for the determination of MDLs for ICP-MS Agilent 8900 QQQ instrumentation (ICP_MS_Analysis_detection_limits_and_QA_QC_WenmingDong_updated_2026-08-06) for samples November 2021 and onward. Missing values within the anion data files are noted as either "-9999" or "0.0" for not detectable (N.D.) data. There are a total of 113 locations containing cation data. Update on 2021-04-11: Added Detemination of Method Detection Limits (MDLs) for ICP-MS document, which can be accessed as a PDF or with Microsoft Word. Update on 2022-06-10: versioned updates to this dataset was made along with these changes: (1) updated cation data for all locations up to 2021-12-31, (2) removal of units from column headers in datafiles, (3) added row underneath headers to contain units of variables, (4) removed suffix and prefix on two variables (“aqberylliumion_asberyllium” and “aqlithiumion_aslithium”), (5) added -9999 for empty numerical cells, and (6) the addition of the file-level metadata (flmd.csv) and data dictionary (dd.csv) were added to comply with the File-Level Metadata Reporting Format. Update on 2022-09-09: Updates were made to reporting format specific files (file-level metadata and data dictionary) to correct swapped file names, add additional details on metadata descriptions on both files, add a header_row column to enable parsing, and add version number and date to file names (v2_20220909_flmd.csv and v2_20220909_dd.csv). Update on 2023-08-08: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-01-05. The file level metadata and data dictionary files were updated to reflect the additional data added. Update on 2024-03-11: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-10-16. Further, revisions to the data files were made to remove incorrect data points (from 1970 and 2001). The reporting format specific files were updated to reflect the additional data added. Updated versions of the PDF and docx files for determination of MDLs for ICP-MS data were added to this dataset for samples starting in November 2021. Update on 2025-05-15: Updates were made to both the data files and reporting format specific files. New available cation data was added, up until the end of WY2024 (September 30, 2024). International Generic Sample Numbers (IGSNs), when registered, were added to the data files. The reporting format specific files were updated to reflect the additional data added. Update on 2026-09-01: Updates were made to both the data files and reporting format specific files. New available cation data was added, up until the end of WY2025 (September 30, 2025). Updated versions, as of 2026-08-06, of the PDF and docx files for determination of MDLs for ICP-MS data were added to this dataset for samples starting in November 2021.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Identifying Bounds of Inorganic Content in Solventless Processing of Hybrid Solid Electrolytes

Solid-state lithium batteries require safe, robust electrolytes to enable higher energy densities and improved safety over conventional cells. Hybrid polymer–ceramic electrolytes are a promising solution, combining the processability of polymers with the high ionic conductivity and mechanical strength of inorganic fillers. In this work, we demonstrate a solventless, UV-curing method to produce hybrid solid electrolytes using a poly(ethylene glycol) dimethyl ether (PEGDME)-based photocurable matrix incorporating Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP) or Li 7 La 3 Zr 2 O 12 (LLZO) ceramic electrolyte. Inorganic filler loadings up to ∼55 wt.% could be successfully incorporated via this process which was the highest inorganic content at which the slurry remains processable and cured into a uniform film. The resulting UV-cured composite electrolytes remain flexible and exhibit room-temperature ionic conductivities on the order of 10 −4 S·cm −1 , along with notably improved lithium-ion transference numbers compared to conventional polymer electrolytes. Similar performance and processing limits were observed for both LAGP and LLZO, indicating that ceramic filler chemistry does not significantly affect the UV-curing process or the electrolyte's ion transport properties in this regime. Eliminating solvents from fabrication not only simplifies processing and mitigates environmental concerns but also enables higher solid contents that enhance mechanical strength and help suppress lithium dendrite formation. In conclusion, this scalable approach thus paves the way for manufacturing robust composite solid electrolytes for next-generation solid-state batteries (SSBs).

Batteries↗
NASA NTRS2018

Electrical Characteristics of the Mars Electrostatic Precipitator

NASA's next generation Mars missions will include chemical processing plants to convert the Martian atmosphere into consumable products needed to support astronaut activities. The thin, mostly carbon dioxide atmosphere of Mars is estimated to have 5-10 particles/cu. cm which have a radius of 1.6-2.27 microns on average. These dust particles could potentially foul the chemical process or reduce the purity of the products. Electrostatic precipitation is one possible solution to remove dust particles from the ingested Mars atmosphere. The Electrostatics and Surface Physics Laboratory at NASA's Kennedy Space Center has developed an electrostatic precipitator testbed to understand the intricacies of corona discharges in dusty flows simulating Mars atmospheric conditions. Current-voltage trends have been established for a number of precipitator flow conditions. Corona onset voltage and streamer onset voltage trends versus pressure are also established.

Johansen, Michael R.↗
NASA NTRS2018

Electrical Characteristics of the Mars Electrostatic Precipitator

NASA's next generation Mars missions will include chemical processing plants to convert the Martian atmosphere into consumable products needed to support astronaut activities. The thin, mostly carbon dioxide atmosphere of Mars is estimated to have 5-10 particles/cu. cm which have a radius of 1.6-2.27 microns on average. These dust particles could potentially foul the chemical process or reduce the purity of the products. Electrostatic precipitation is one possible solution to remove dust particles from the ingested Mars atmosphere. The Electro-statics and Surface Physics Laboratory at NASA's Kennedy Space Center has developed an electrostatic precipitator testbed to understand the intricacies of corona discharges in dusty flows simulating Mars atmospheric conditions. Current-voltage trends have been estab-lished for a number of precipitator flow conditions. Corona onset voltage and streamer onset voltage trends versus pressure are also established.

Johansen, Michael R.↗
DOE OSTI2025

Predicting multi-nodal in-nozzle particle interactions in high-viscosity fluid mediums for acoustophoretic direct-ink writing of line-patterned composites

Patterned functional materials offer improved properties (electrical, thermal, etc.) over their bulk counterparts in many applications, including energy storage, flexible electronics, and sensors. However, manufacturing approaches for patterning materials over large areas with features on the order of hundreds of microns or less are limited. Acoustophoresis, which uses acoustic forces to control particle arrangement in a fluid medium, is a pathway to address this challenge. This process is dependent on particle and fluid properties and enables patterning of a broad range of materials. Herein, a model with experimental validation is presented to demonstrate that acoustophoresis can be combined with direct-ink writing (DIW) to fabricate line patterns over large cm-scale areas. An in-nozzle particle interaction model was developed to investigate the impact of processing conditions on multi-nodal acoustophoretic DIW. The model predicts patterned line widths within a factor of two relative to experimental results for a high viscosity case study. Here, the model was used to investigate the impact of frequency, particle loading, particle radius, and acoustic pressure on line width and patterning time, providing critical feedback regarding the processing conditions suitable for a target application. Model results illustrate that frequency has the greatest impact on line patterns: increasing from 1 to 3 MHz resulted in a greater than 65% reduction in line width and a greater than 85% reduction in patterning time. Additionally, experiments were conducted with an alumina-epoxy ink and a ~21 cm 2 area pattern was rastered in ~5.5 minutes, demonstrating a path towards large-area line-patterned composite fabrication.

25 ENERGY STORAGE↗
DOE OSTI2020

Predicted annual biomass input to maintain soil organic carbon under contrasting management

Corn (Zea mays L.) residue is an important source of lignocellulosic feedstocks for meeting the US renewable energy goals. However, there is uncertainty in how much biomass can be sustainably harvested. The objectives of this study were to (i) simulate soil organic carbon (SOC) dynamics in the 0–20, 20–30, and 0–30 cm soil depths for the 2005–2015 study period using CQESTR, a process-based C model; (ii) establish trends in SOC with residue removal and tillage management over the predictive period of 2016–2035; and (iii) recommend practices to maintain SOC stocks in a corn–soybean (Glycine max L. [Merr.]) rotation with corn residue removal in western Minnesota. The residue removal treatments in the conventional tillage since 1995 (CT 95 ) and no tillage since 1995 (NT 95 ) were initiated in 2005, and in 2006 for the no tillage since 2005 (NT 05 ). Corn residue removal treatments were none, cob removal, ~50% removal, and ~75% removal (R0, RCob, R50, and R75, respectively). Only R0 in NT 05 increased SOC (0.32 Mg C ha –1 yr –1 ) stocks in the top 30 cm soil depth by 2035 with annual aboveground biomass input of 6.30 Mg ha –1 yr –1 . It was concluded that only the NT 05 field has the potential to maintain SOC at the current rate of biomass addition, and a minimal annual aboveground C (MSC) input of 3.75 Mg C ha –1 yr –1 is required to maintain SOC until 2035. These simulation results indicate that caution should be used in removing residue especially under conventional tillage.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

A laser-assisted chlorination process for reversible writing of doping patterns in graphene

Chemical doping can be used to control the charge-carrier polarity and concentration in two-dimensional van der Waals materials. However, conventional methods based on substitutional doping or surface functionalization result in the degradation of electrical mobility due to structural disorder, and the maximum doping density is set by the solubility limit of dopants. Here we show that a reversible laser-assisted chlorination process can be used to create high doping concentrations (above 3 × 10 13 cm -2 ) in graphene monolayers with minimal drops in mobility. The approach uses two lasers—with distinct photon energies and geometric configurations—that are designed for chlorination and subsequent chlorine removal, allowing highly doped patterns to be written and erased without damaging the graphene. To illustrate the capabilities of our approach, we use it to create rewritable photoactive junctions for graphene-based photodetectors.

42 ENGINEERING↗
DOE OSTI2021

Measurement of $d^2 \sigma/d|\vec{q}|d E_{avail}$ and 2p2h contribution using charged current $\nu_\mu$ interactions in the NOvA Near Detector

This Thesis presents the analysis methods and measurement of the $d^2 \sigma/d|\vec{q}|d E_{avail}$-CC inclusive cross section that describes neutrino scattering in a predominantly hydrocarbon medium. Studies that are prerequisite for the analysis including, variable determinations, event selections, efficiency, purity determinations, and systematic uncertainty estimations, are summarized. Tests of the analysis are also detailed, and shown to reproduce the input distributions. The double-differential cross-section measurement provides the foundation for determination of the inclusive rate for the excess induced by 2p2h processes together with nuclear medium effects that are not described by the Fermi gas model. The methodology for the extraction of this rate, defined as the excess observed relative to the rate estimated for known single-nucleon interactions, is described in detail. The following new measurements are reported in this Thesis: (1) The $\nu_\mu-$CC inclusive double-differential cross section as a function of three-momentum transfer and available hadronic energy, for an average $E_\nu$ of 1.8 GeV, is obtained. The double-differential cross section value that obtains when the bin widths are taken to be the dimensions of the entire analysis domain, e.g. $0.2 \le |\vec{q}| \le 2.0 GeV/c$ and $0.0 \le E_{avail} \le 2.0$ GeV, is inclusive cross section is $(6.05 \pm 0.75)\times10^{-39}$ cm$^2$/GeV/GeV/$c$/nucleon. An event excess attributed to 2p2h-MEC processes is observed; most of the rate occurs in a contiguous phase space region $0.3 \le |\vec{q}| \le 1.0$ GeV$/c$ $0.0 \le E_{avail} \le 0.35$ GeV. This rate represents $12.0\pm 6.5\%$ of the observed CC inclusive cross section; its cross section ratio relative to CCQE scattering is estimated to be $44.3 \pm 23.9\%$.

Olson, Travis Grant↗
NASA NTRS1980

A study on the electrolysis of sulfur dioxide and water for the sulfur cycle hydrogen production process

Experimental electrolysis cells using various platinum catalyzed carbon electrodes were tested. When operated at 200 mA/sq cm current density using 50 w/o acid at 50 C and 1 atm, a reference cell required 1.22 volts and degraded rapidly. After several improvements were incorporated into electrodes and the test cell configuration, a later cell required only 0.77 volts under identical operating conditions. At a lower current density, 100 mA/sq cm, the cell required only 0.63 volts. Kinetic studies on metal electrodes, measurements of temperature effects on electrode kinetics, investigations of electrocatalytic activities of metal electrodes over a wide range of acid concentrations, cyclic voltametric studies and evaluation of alternate catalysts were also conducted. From diffusivity experiments, a cation exchange membrane material, P-4010, exhibited an excellent diffusion coefficient, more than two orders of magnitude lower than that of rubber. Ionic resistivity measurements of eight materials showed that microporous rubber had the lowest resistivity.

Source record↗
DOE OSTI2021

Understanding Reproducibility of Sputter‐Deposited Metastable Ferroelectric Wurtzite Al 0.6 Sc 0.4 N Films Using In Situ Optical Emission Spectrometry

High‐Sc Al 1– x Sc x N thin films are of tremendous interest because of their attractive piezoelectric and ferroelectric properties, but overall film quality and reproducibility are widely reported to suffer as x increases. In this study, structural and electrical properties of metastable Al 0.6 Sc 0.4 N films are connected with plasma changes during film growth, identified via glow discharge optical emission spectroscopy (GD‐OES), and linked to the target mode changes. This in situ GD‐OES technique uses changes in the N 2 (I) intensity, correlated with DC bias hysteresis behavior of a Al 0.6 Sc 0.4 target in metallic and poisoned modes, to identify films that subsequently exhibit unacceptable structural and electrical performance. Two representative samples deposited under identical conditions but possessing distinct properties related to phases present in the films are focused on. Films sputtered under a poisoned target mode produce pure wurtzite ferroelectric Al 0.6 Sc 0.4 N with a reversible 80 μC cm −1 polarization and 3.1 MV cm −1 coercive field. When identical chamber settings are used but the process starts in metallic mode, a mixed wurtzite/rocksalt film is deposited which exhibits nanometer‐scale changes to the film microstructure and a nonferroelectric response. These results illustrate the utility of optical emission spectroscopy for tracking target mode fluctuations when fabricating metastable materials such as high‐Sc Al 1– x Sc x N films.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A low-cost sulfate-based all iron redox flow battery

Redox flow batteries (RFBs) are promising choices for stationary electric energy storage. Nevertheless, commercialization is impeded by high-cost electrolyte and membrane materials. Here, we report a low-cost all-iron RFB that features inexpensive FeSO 4 electrolytes, microporous membrane along with a glass fiber separator. The addition of 0.1 м 1-ethyl-3-methylimidazolium chloride (EMIC) overcomes the low solubility of FeSO 4 in water which is raised to 2.2 м. DFT calculations demonstrate that EMI + can strengthen the interaction between sulfate anions and water molecules. This electrolyte composition also allows both anode and cathode reactions to operate without actively maintaining a pH gradient between them, thus eliminating the need for expensive ion exchange membranes. The all-iron RFB demonstrates stable operation at a current density of 20 mA cm –2 for more than 800 cycles via a simple, periodic regeneration process. Furthermore, the system cost of FeSO 4 /EMIC RFBs is projected to be $ 50 per kWh due to its low-cost active materials and the inexpensive microporous membrane. Finally, this low-cost, high-concentration all-iron RFB is a promising stationary energy–storage system for storing renewable energy.

25 ENERGY STORAGE↗
DOE OSTI2020

Soil Respiration Response to Rainfall Modulated by Plant Phenology in a Montane Meadow, East River, Colorado, USA

Soil respiration is a primary component of the terrestrial carbon cycle. However, predicting the response of soil respiration to climate change remains a challenge due to the complex interactions between environmental drivers, especially plant phenology, temperature, and soil moisture. In this study, we use a 1-D diffusion-reaction model to calculate depth-resolved CO 2 production rates from soil CO 2 concentrations and surface efflux observations in a subalpine meadow in the East River watershed, CO. Modeled rates are compared to in situ soil temperature and moisture conditions and MODIS satellite enhanced vegetation index (EVI) representing plant phenology across three hydrologically distinct growing seasons from 2016-2018. While soil respiration correlated with temperature on diel timescales (p<0.05), seasonal variability was dominated by soil moisture and plant phenology (p<0.05). We observed significant respiration increases in response to precipitation events; however, magnitude and duration were significantly higher in 2017 than 2016 despite similar wetting characteristics. Based on MODIS EVI, we suggest the respiration response to rainfall is controlled by plant phenology, which in turn reflects the capacity of plants to respond to precipitation via increased photosynthesis and autotrophic respiration, behavior that is not captured in typical soil respiration pulse models. Projected changes in montane climate such as earlier snowmelt and prolonged fore-summer drought may decrease soil respiration fluxes by decreasing the overlap between peak productivity and the summer monsoon. Lastly, we observed significant late-season CO 2 fluxes from the deep sub-soil (>165 cm) that support growing evidence for the importance of sub-soil processes in driving integrated respiration fluxes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

High n -type conductivity and carrier concentration in Si-implanted homoepitaxial AlN

We demonstrate Si-implanted AlN with high conductivity (>1 Ω -1 cm -1 ) and high carrier concentration (5 × 101 8 cm -3 ). This was enabled by Si implantation into AlN with a low threading dislocation density (TDD) (<10 3 cm -2 ), a non-equilibrium damage recovery and dopant activation annealing process, and in situ suppression of self-compensation during the annealing. Low TDD and active suppression of V Al -nSi Al complexes via defect quasi Fermi level control enabled low compensation, while low-temperature, non-equilibrium annealing maintained the desired shallow donor state with an ionization energy of ~70 meV. The realized n-type conductivity and carrier concentration are over one order of magnitude higher than that reported thus far and present a major technological breakthrough in doping of AlN.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Laboratory study of the PFRC-2's initial plasma densification stages

Initial plasma densification by odd-parity rotating magnetic fields (RMF o ) applied to the linear magnetized Princeton field-reversed configuration (PFRC-2) device with fill gases at pressures near 1 mTorr proceeds through two phases: a slow one, characterized by a rise time $τ_{slow}$ ~ 100 $μ$s, followed by a fast one, characterized by $τ_{fast}$ ~ 10 $μ$s. The transition from slow to fast occurs at a line-integral-averaged electron density, t n e , near 2$\times$ 10 11 cm –3 , independent of magnetic field. Here, over most of the range of experimental parameters investigated, as the PFRC-2 axial magnetic field strength was increased, RMF o power decreased, gas fill pressure lowered, or lower atomic mass unit (AMU) fill gas used, the duration of the slow phase lengthened from 50 $μ$s to longer than 10 ms after the RMF o power began. The post-fast-phase maximum n e increases with the fill-gas AMU, exceeding 5 × 10 13 cm –3 for Ar. The slow phase is consistent with atomic physics processes and field-parallel sound-speed losses. The fast phase may be explained by improved axial confinement, possibly augmented by radial or axial contraction of the plasma. Another possible explanation, a large increase in electron temperature, is inconsistent with x-ray emission. The n e behavior is discussed in relation to the E to H transition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗