SEARCH · Engineering Papers
Results for “CATALYST”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Hematite‐Based Solar Water Splitting in Acidic Solutions: Functionalization by Mono‐ and Multilayers of Iridium Oxygen‐Evolution Catalysts
Abstract Solar water splitting in acidic solutions has important technological implications, but has not been demonstrated to date in a dual absorber photoelectrochemical cell. The lack of functionally stable water‐oxidation catalysts (WOCs) in acids is a key reason for this slow development. The only WOCs that are stable at low pH are Ir‐based systems, which are typically too expensive to be implemented broadly. It is now shown that this deficiency may be corrected by applying an ultra‐thin monolayer of a molecular Ir WOC to hematite for solar water splitting in acidic solutions. The turn‐on voltage is observed to shift cathodically by 250 mV upon the application of a monolayer of the molecular Ir WOC. When the molecular WOC is replaced by a heterogeneous multilayer derivative, stable solar water splitting for over 5 h is achieved with near‐unity Faradaic efficiency.
Photoenzymatic Hydrogenation of Heteroaromatic Olefins Using 'Ene'-Reductases with Photoredox Catalysts
Explore the source record for details and available documents.
The Mechanism of CO and CO 2 Hydrogenation to Methanol over Cu‐Based Catalysts
Abstract Methanol, an important chemical, fuel additive, and precursor for clean fuels, is produced by hydrogenation of carbon oxides over Cu‐based catalysts. Despite the technological maturity of this process, the understanding of this apparently simple reaction is still incomplete with regard to the reaction mechanism and the active sites. Regarding the latter, recent progress has shown that stepped and ZnO x ‐decorated Cu surfaces are crucial for the performance of industrial catalysts. Herein, we integrate this insight with additional experiments into a full microkinetic description of methanol synthesis. In particular, we show how the presence or absence of the Zn promoter dramatically changes not only the activity, but unexpectedly the reaction mechanism itself. The Janus‐faced character of Cu with two different sites for methanol synthesis, Zn‐promoted and unpromoted, resolves the long‐standing controversy regarding the Cu/Zn synergy and adds methanol synthesis to the few major industrial catalytic processes that are described on an atomic level.
Controllable Fabrication of Tungsten Oxide Nanoparticles Confined in Graphene-Analogous Boron Nitride as an Efficient Desulfurization Catalyst
Tungsten oxide nanoparticles (WOxNPs) are gaining increasing attention, but low stabiliity and poor dispersion of WOxNPs hinder their catalytic applications. Herein, WOxNPs were confined in graphene-analogous boron nitride (g-BN) by a one-step, in situ method at high temperature, which can enhance the interactions between WOxNPs and the support and control the sizes of WOxNPs in a range of about 4–5 nm. The as-prepared catalysts were applied in catalytic oxidation of aromatic sulfur compounds in which they showed high catalytic activity. A balance between the W loading and the size distribution of the WOxNPs could govern the catalytic activity. Furthermore, a synergistic effect between g-BN and WOxNPs also contributed to high catalytic activity. The reaction mechanism is discussed in detail and the catalytic scope was enlarged.
Catalyst Revised: Rethinking the ParaView in Situ Analysis and Visualization API
As in situ analysis goes mainstream, ease of development, deployment, and maintenance becomes essential, perhaps more so than raw capabilities. In this paper, we present the design and implementation of Catalyst, an API for in situ analysis using ParaView, which we refactored with these objectives in mind. Furthermore, our implementation combines design ideas from in situ frameworks and HPC tools like Ascent and MPICH.
The Role of Co-ZSM-5 Catalysts in Aerobic Oxidation of Ethylbenzene
Various forms of cobalt catalysts have been studied extensively for selective aerobic oxidation of hydrocarbons. However, it remains unclear whether cobalt can directly activate molecular oxygen under mild reaction conditions. Here we investigated the catalytic roles of cobalt in ethylbenzene oxidation with and without a hydroperoxide initiator. The contribution of different cobalt species was studied by varying the metal loading on Co-impregnated ZSM-5 samples. Quantitative EPR was used to determine the impact of cobalt catalysts on the free radical concentrations. Furthermore, this work provided strong evidence that cobalt, in several different forms, catalyzes hydrocarbon oxidation by facilitating peroxy bond cleavage, instead of direct oxygen activation.
Recent Advances in the Understanding of Boron-Containing Catalysts for the Selective Oxidation of Alkanes to Olefins
The production of ethylene and propylene through aerobic alkane oxidation without significant coproduction of CO and CO 2 (CO x ) presents a challenge to academic and industrial researchers alike. Recently, boron-containing materials such as hexagonal boron nitride (hBN) have been identified as active and selective catalysts for the oxidative dehydrogenation (ODH) of propane to propylene with minimal CO x selectivity. Additionally, high olefin selectivity is also obtained in the oxidation of other alkanes and other materials such as metal borides and supported B/SiO 2 have been successfully applied to this transformation. Here, recent advances in the understanding of these catalysts in the oxidation of light alkanes are presented here providing a framework for further study of this exciting field.
Sub-micron Cu/SSZ-13: Synthesis and application as selective catalytic reduction (SCR) catalysts
Not Available
Transition metal carbide catalysts for biomass conversion: A review
The increasing demand for sustainable energy resources has initiated the investigation of biomass conversion over a wide range of catalysts. Among those, transition metal carbides have been extensively studied which demonstrated distinct reactivity and/or selectivity from transition or noble metals in a variety of chemical reactions. In this review, we summarize recent advances in the synthesis of transition metal carbides and their applications in biomass conversion, particularly focusing on the catalytic conversions of (hemi)cellulose, lignin and some typical platform chemicals to fuels or fine chemicals involving C-C, C-O-C and C-O-H bonds cleavages. Perspectives regarding the future research directions on the improvement of transition metal carbide catalysts and detailed reaction mechanism studies are also presented.
Highly active Pt/MoC and Pt/TiC catalysts for the low-temperature water-gas shift reaction: Effects of the carbide metal/carbon ratio on the catalyst performance
We present that Pt/MoC and Pt/TiC(001) are excellent catalysts for the low-temperature water-gas shift (WGS, CO + H 2 O → H 2 + CO 2 ) reaction. They exhibit high-activity, stability and selectivity. The highest catalytic activities are seen for small coverages of Pt on the carbide substrates. Synergistic effects at the metal-carbide interface produce an enhancement in chemical activity with respect to pure Pt, MoC and TiC. A clear correlation is found between the ability of the Pt/MoC and Pt/TiC(001) surfaces to partially dissociate water and their catalytic activity for the WGS reaction. Finally, an overall comparison of the results for Pt/MoC and Pt/Mo 2 C(001) indicates that the metal/carbon ratio in the carbide support can have a strong influence in the stability and selectivity of WGS catalysts and is a parameter that must be taken into consideration when designing these systems.
A Theoretical Study on Reaction Mechanisms and Kinetics of Thiophene Hydrodesulfurization over MoS 2 Catalysts
In the present work, thiophene hydrodesulphurization (HDS) over the Mo-edge, the S-edge, and the Mo-S connection edge of MoS 2 catalyst with 50% sulfur coverage was studied using first-principles based microkinetic modeling. Two parallel HDS routes, i.e., direct desulfurization (DDS) and hydrogenation (HYD) were taken into account. It has been found that the major reaction route of thiophene HDS on the Mo- and the Mo-S edges is temperature dependent. In the low temperature range of 500~600 K, the HYD route is dominant, leading to the C 4 H 8 formation. As the temperature increases, the DDS route becomes competitive with the HYD route. At the temperature above 650 K, the DDS route will be the dominant HDS reaction route on the Mo- and the Mo-S edges. While the DDS route that leads to the formation of C4H6 is the major thiophene HDS reaction route on the S-edge in the entire temperature range of 500~750 K. The microkinetic modeling results show the overall HDS activity on the S-edge is lower than it on the Mo- and the Mo-S edges. The Mo-S edge also provides a preferential reaction pathway, which facilitates 2-hydrothiophene migration from the Mo-edge to the S-edge, followed by remaining elementary steps with lower activation barriers in the DDS route. The work was financially supported by the National Natural Science Foundation of China (No. 21476012, 21571012, 21407007 and 91534201). The computing time was granted by a scientific theme user proposal in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), which is a U.S. Department of Energy national scientific user facility located at Pacific Northwest National Laboratory (PNNL) in Richland, Washington. Part of computing time was provided the National Energy Research Scientific Computing Center (NERSC). D. Mei is supported by the US Department of Energy, Office of Sciences, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences.
Selectivity loss of Pt/CeO{sub2} PROX catalysts at low CO concentrations: mechanism and active site study.
Abstract not provided