DOE OSTI2019
To determine the composition difference between the solid and liquid films in plant practice for high-Mn steel castings, a reaction experiment was carried out to investigate the composition profile of MnO and SiO{sub 2} in the slag layer. Based on the experimental results, a mathematical model of the mold slag for high-Mn steel was developed to describe the nonuniform infiltration behavior of mold slag during oscillation cycles. Moreover, the effects of uneven slag films on slab lubrication and heat transfer in the mold are discussed. The results show that the concentrations of MnO and SiO{sub 2} over the flux layer have an opposite stair-step distribution, which consists of a reaction layer and nonreaction layer. When the reaction layer thickness is 5 mm, a thicker liquid film is formed between the slab and the mold. The inhomogeneity of the composition in the solid film causes large fluctuations in the heat flux in the mold, resulting in irregular depressions on the shell surface. With a reacting thickness of 10 mm, the reacting slag fills in the gap to generate a thinner solid film, which increases the overall heat flux in the mold. Since mold oscillation combined with slag rim enhances the pressure flow in the vicinity of the meniscus, the liquid slag within 80 mm of the mold wall is mixed and consumed quickly. In contrast, the liquid slag beyond 80 mm from the mold wall with a low velocity stays longer in the liquid pool. The model predictions illuminate the characteristics of slag infiltration during high-Mn steel casting, showing good agreement with plant measurements.