SEARCH · Engineering Papers

Results for “Boosting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1963

Apollo 2 Second Generation Lunar Exploration System Studies CFY 1963

The Apollo II Second Generation Lunar Exploration System includes the direct landing spacecraft which consists of cargo command module, service module, and landing module. The landing module is also capable of being used as the Lunar Landing Vehicle (LLV) for landing unmanned cargos consisting of shelter modules such as the Lunar Occupancy Payload and other cargo in support of lunar surface operations. High energy cryogenic propellants are utilized to permit direct landing, manned, or logistic missions with use of a single Saturn V class booster. In last year's studies, the LLV was configured for maximum payload and with consideration for the direct three-man landing and return mission. Light weight and low vehicle height above the lunar surface at touchdown were major objectives. Logistic cargos of more than 27,000 pounds landed on the Moon were achieved within the single Saturn V boost capability. For the manned mission, the lunar take-off weight was determined to be 28,000 pounds ready for the return-to-Earth portion of the mission. The command module utilized was an advanced light-weight design weighing 10,000 pounds including supporting subsystems. Cryogenic oxygen/hydrogen propulsion was again used for maximum propulsion efficiency. Study of the Lunar Occupancy Payload was also accomplished last year. This module was configured to serve as an early lunar shelter or outpost station or as a basic module of an integrated base module complex. Single and dual compartment versions, as well as special mission versions, were studied.

Matzenaur, J. O.↗

NASA NTRS1980

New mounting improves solar-cell efficiency

Method boosts output by about 20 percent by trapping and redirecting solar radiation without increasing module depth. Mounted solar-cell array is covered with internally reflecting plate. Plate is attached to each cell by transparent adhesive, and space between cells is covered with layer of diffusely reflecting material. Solar energy falling on space between cells is diffused and reflected internally by plate until it is reflected onto solar cell.

Shepard, N. F., Jr.↗

NASA NTRS1981

Efficient, lightweight dc/dc switching converter

Converters have input properties of boost power stage and output properties of buck power stage, yet they perform general conversion function with high efficiency. Other features include non-pulsating input/output currents, use of capacitive energy transfer, low output voltage ripple, reduced EMI, and small size.

Cuk, S.↗

NASA NTRS1980

JPL analytical performance prediction capability

The development of a computer code to simulate and predict the performance of large deployable antenna structures is discussed. The computer code is expected to account for all phases of hardware use, i.e., ground handling, boost, deployment, on orbit station keeping, and transfer from LEO to GEO, if applicable. In addition to accounting for static and dynamic loading of the basic structure, the variation in the precision of the reflector surface and the alignment of the feed support structure as a function orbit are scrutinized in order to accommodate electromagnetic analysis. Specific tasks directed towards the development of the computer code are reported and a number of thermal and structural models are discussed.

Chen, R.↗

NASA NTRS1979

Rocket studies of solar corona and transition region

The XSST (X-Ray Spectrometer/Spectrograph Telescope) rocket payload launched by a Nike Boosted Black Brant was designed to provide high spectral resolution coronal soft X-ray line information on a spectrographic plate, as well as time resolved photo-electric records of pre-selected lines and spectral regions. This spectral data is obtained from a 1 x 10 arc second solar region defined by the paraboloidal telescope of the XSST. The transition region camera provided full disc images in selected spectral intervals originating in lower temperature zones than the emitting regions accessible to the XSST. A H-alpha camera system allowed referencing the measurements to the chromospheric temperatures and altitudes. Payload flight and recovery information is provided along with X-ray photoelectric and UV flight data, transition camera results and a summary of the anomalies encountered. Instrument mechanical stability and spectrometer pointing direction are also examined.

Acton, L. W.↗

NASA NTRS1980

Mated vertical ground vibration test

The Mated Vertical Ground Vibration Test (MVGVT) was considered to provide an experimental base in the form of structural dynamic characteristics for the shuttle vehicle. This data base was used in developing high confidence analytical models for the prediction and design of loads, pogo controls, and flutter criteria under various payloads and operational missions. The MVGVT boost and launch program evolution, test configurations, and their suspensions are described. Test results are compared with predicted analytical results.

Ivey, E. W.↗

NASA NTRS1980

A study of the lifetimes of geosynchronous transfer orbits

The study concerns the orbit lifetimes of spent upper stages that are used to boost NASA Space Transportation System payloads into geosynchronous transfer orbits. A semi-analytical method of trajectory computation was developed and applied to these particular orbits. It was found that gravitational perturbations of the sun, moon and oblate earth cause large changes in the perigee altitude. The following parameters have a strong influence on orbit lifetimes: Time of year of launch; Inertial orientation of orbital plane; Inclination of orbital plane.

Graf, O. F., Jr.↗

NASA NTRS1980

The spectral response of a front surface field solar cell

A calculation of the short-circuit current as a function of wavelength of the incident light, induced in a front surface field solar cell, is presented. The cell consists of a P(+)-P-N(+) junction. The electric field present in the P(+) layer situated at the front surface (the surface exposed to the sun) boosts the minority carrier collection at the P-N(+) junction sufficiently to make this structure a viable alternative to ordinary solar cells. A distinct advantage derives from the placement of all ohmic contacts on the back-surface facilitating array assemblage.

Von Roos, O.↗

NASA NTRS1979

Space manufacturing III; Proceedings of the Fourth Conference, Princeton University, Princeton, N.J., May 14-17, 1979

Papers are presented on the various technological, political, economic, environmental and social aspects of large manufacturing facilities in space. Specific topics include the potential global market for satellite solar power stations in 2025, the electrostatic separation of lunar soil, methods for extraterrestrial materials processing, the socio-political status of efforts toward the development of space manufacturing facilities, the financing of space industrialization, the optimization of space manufacturing systems, the design and project status of Mass Driver Two, and the use of laser-boosted lighter-than-air-vehicles as heavy-lift launch vehicles. Attention is also given to systems integration in the development of controlled ecological life support systems, the design of a space manufacturing facility to use lunar materials, high performance solar sails, the environmental effects of the satellite power system reference design, the guidance, trajectory and capture of lunar materials ejected from the moon by mass driver, the relative design merits of zero-gravity and one-gravity space environments, consciousness alteration in space and the prospecting and retrieval of asteroids.

Grey, J.↗

NASA NTRS1980

User's design handbook for a Standardized Control Module (SCM) for DC to DC Converters, volume 2

A unified design procedure is presented for selecting the key SCM control parameters for an arbitrarily given power stage configuration and parameter values, such that all regulator performance specifications can be met and optimized concurrently in a single design attempt. All key results and performance indices, for buck, boost, and buck/boost switching regulators which are relevant to SCM design considerations are included to facilitate frequent references.

Lee, F. C.↗

NASA NTRS1980

Orbit transfer vehicle advanced expander cycle engine point design study. Volume 2: Study results

The design characteristics of the baseline engine configuration of the advanced expander cycle engine are described. Several aspects of engine optimization are considered which directly impact the design of the baseline thrust chamber. Four major areas of the power cycle optimization are emphasized: main turbine arrangement; cycle engine source; high pressure pump design; and boost pump drive.

Diem, H. G.↗

NASA NTRS1981

Viscoelastic propellant effects on Space Shuttle Dynamics

The program of solid propellant research performed in support of the space shuttle dynamics modeling effort is described. Stiffness, damping, and compressibility of the propellant and the effects of many variables on these properties are discussed. The relationship between the propellant and solid rocket booster dynamics during liftoff and boost flight conditions and the effects of booster vibration and propellant stiffness on free free solid rocket booster modes are described. Coupled modes of the shuttle system and the effect of propellant stiffness on the interfaces of the booster and the external tank are described. A finite shell model of the solid rocket booster was developed.

Bugg, F.↗

NASA NTRS1980

Understanding the LANDSAT market in developing countries

The constraints on the growth of the market which stem from the development process itself and from a country's technical, political, and institutional attributes were examined. Four competing factors guide the development of policy regarding an operational land remote sensing system and are summarized. The factors are: there is a need to boost U.S. experts in areas where the U.S. holds a technological lead; the need to develop user applications in developing countries on their terms coincides with foreign policy; developing countries desire to take control of their own development; and the U.S. government wants to enlist the participation of major companies in the management, operation, and ownership of the operational system.

Willard, M. R.↗

NASA NTRS1981

Low drag attitude control for Skylab orbital lifetime extension

In the fall of 1977 it was determined that Skylab had started to tumble and that the original orbit lifetime predictions were much too optimistic. A decision had to be made whether to accept an early uncontrolled reentry with its inherent risks or try to attempt to control Skylab to a lower drag attitude in the hope that there was enough time to develop a Teleoperator Retrieval System, bring it up on the Space Shuttle and then decide whether to boost Skylab to a higher longer life orbit or to reenter it in a controlled fashion. The end-on-velocity (EOVV) control method is documented, which was successfully applied for about half a year to keep Skylab in a low drag attitude with the aid of the control moment gyros and a minimal expenditure of attitude control gas.

Glaese, J. R.↗

NASA NTRS1981

STS-2 second space shuttle mission: Shuttle to carry scientific payload on second flight

The STS-2 flight seeks to (1) fly the vehicle with a heavier payload than the first flight; (2) test Columbia's ability to hold steady attitude for Earth-viewing payloads; (3) measure the range of payload environment during launch and entry; (4) further test the payload bay doors and space radiators; and (5) operate the Canadian-built remote manipulator arm. The seven experiments which comprise the OSTA-1 payload are described as well as experiments designed to assess shuttle orbiter performance during launch, boost, orbit, atmospheric entry and landing. The menu for the seven-day flight and crew biographies, are included with mission profiles and overviews of ground support operations.

Source record↗

NASA NTRS1982

Inexpensive Logic-Level Converter

Relatively-simple transformer circuit boosts 0-to-5 volt pulses from TTL circuitry to plus or minus 10-volt pulses for transmission over data bus. Also reduces bus voltages to lower voltages required by TTL circuitry. Circuit consists of transformer, two voltage-reference networks, quad differential line receiver, and line driver.

Wilcox, S. W.↗

NASA NTRS1981

High-frequency high-voltage high-power DC-to-DC converters

The current and voltage waveshapes associated with the power transitor and the power diode in an example current-or-voltage step-up (buck-boost) converter were analyzed to highlight the problems and possible tradeoffs involved in the design of high voltage high power converters operating at switching frequencies in the range of 100 Khz. Although the fast switching speeds of currently available power diodes and transistors permit converter operation at high switching frequencies, the resulting time rates of changes of current coupled with parasitic inductances in series with the semiconductor switches, produce large repetitive voltage transients across the semiconductor switches, potentially far in excess of the device voltage ratings. The need is established for semiconductor switch protection circuitry to control the peak voltages appearing across the semiconductor switches, as well as to provide the waveshaping action require for a given semiconductor device. The possible tradeoffs, as well as the factors affecting the tradeoffs that must be considered in order to maximize the efficiency of the converters are enumerated.

Wilson, T. G.↗

NASA NTRS1981

OAO-3 end of mission tests report

Twelve engineering type tests were performed on several subsystems and experiment(s) of the OAO 3 spacecraft near its end of mission. The systems tested include: Princeton experiment package (PEP), fine error system guidance, inertial reference unit, star trackers, heat pipes, thermal control coatings, command and data handling, solar array; batteries, and onboard processor/power boost regulator. Generally, the systems performed well for the 8 1/2 years life of OAO 3, although some degradation was noted in the sensitivity of PEP and in the absorptivity of the skin coatings. Battery life was prolonged during the life of the mission in large part by carefully monitoring the charge-discharge cycle with careful attention not to overcharge.

Kalil, F.↗