Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Best”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Application of remote sensing in the study of vegetation and soils in Idaho

The author has identified the following significant results. Comparison of ERTS-1 imagery and USGS 1:250,000 scale maps of study areas with known ground points revealed significant map errors. These errors were sufficient to render impractical the projection of ERTS-1 imagery directly onto maps of the area. Marked differences were found in the delineation of ground features by different MSS bands. Generally, Band 4 was least useful, while Band 5 proved valuable for indicating patterns of native vegetation, cultivated areas - both dry and irrigated, lava fields, drainage basins, and deep bodies of water. Band 6 was better for landforms and drainages and for shallow bodies of water than Band 5 but inferior for indicating patterns in native vegetation and most types of cultivated land. Band 7 was best of all for indicating lava flows, water bodies, and landform features. Use of a additive color viewer-projector aided greatly in separation of images. A combination of Bands 5 and 7 with appropriate color filters proved best for separating most types of native vegetation and cultivated crops. Landform features and water bodies also showed well with this combination. The addition of Band 4 imagery to these further enhanced the identification of semi-dormant vegetation.

Tisdale, E. W.↗
NASA NTRS1972

Tornado occurrences related to overshooting cloud-top heights as determined from ATS pictures

A sequence of ATS 3 pictures including the development history of large anvil clouds near Salina, Kansas was enlarged by NASA into 8X negatives which were used to obtain the best quality prints by mixing scan lines in 8 steps to minimize checker-board patterns. These images resulted in the best possible resolution, permitting use to compute the heights of overshooting tops above environmental anvil levels based on cloud shadow relationships along with the techniques of lunar topographic mapping. Of 39 heights computed, 6 were within 15 miles of reported positions of 3 tornadoes. It was found that the tornado proximity tops were mostly less than 5000 ft, with one exception of 7000 ft, suggesting that tornadoes are most likely to occur when overshooting height decreases. In order to simulate surface vortices induced by cloud-scale rotation and updraft fields, a laboratory model was constructed. The model experiment has shown that the rotation or updraft field induces a surface vortex but their combination does prevent the formation of the surface vortex. This research leads to a conclusion that the determination of the cloud-top topography and its time variation is of extreme importance in predicting severe local storms for a period of 0 to 6 hours.

Fujita, T. T.↗
NASA NTRS1973

Aerodynamic effects of five lift-fan pod arrangements on an unpowered V/STOL transport model

An investigation was conducted in the Langley V/STOL tunnel to determine the effect of longitudinally oriented wing-mounted pods on the longitudinal and lateral aerodynamic characteristics in the cruise flight condition of a high-wing V/STOL transport model. Five pod arrangements were tested - three configurations with in-line pods at 20, 40, or 60 percent semispan and two split pod configurations with rear pods at 20 percent semispan and front pods at 40 or 60 percent semispan. In general, addition of the pods to the model decreased the stability, increased the lift-curve slope, and alleviated the abrupt stall of the basic model. The configuration with pods at 20 percent semispan had an abrupt instability at 10 deg angle of attack, All the configurations had lateral stability at sideslip angles from 5 to -5 deg. Very little difference in results existed between the configurations with pods at 40 and 60 percent semispan. Of the split pod configurations, the configuration with front pods at 40 percent semispan offered the best trimmed lift and lift-induced drag characteristics at high angles of attack. The configuration with in-line pods at 40 or 60 percent semispan provided the best cruise characteristics of all the pod configurations.

Thomas, J. L.↗
NASA NTRS1973

Counter tube window and X-ray fluorescence analyzer study

A study was performed to determine the best design tube window and X-ray fluorescence analyzer for quantitative analysis of Venusian dust and condensates. The principal objective of the project was to develop the best counter tube window geometry for the sensing element of the instrument. This included formulation of a mathematical model of the window and optimization of its parameters. The proposed detector and instrument has several important features. The instrument will perform a near real-time analysis of dust in the Venusian atmosphere, and is capable of measuring dust layers less than 1 micron thick. In addition, wide dynamic measurement range will be provided to compensate for extreme variations in count rates. An integral pulse-height analyzer and memory accumulate data and read out spectra for detail computer analysis on the ground.

Hertel, R.↗
NASA NTRS1973

Structural lineaments of Gaspe from ERTS imagery

A test study was conducted to assess the value of ERTS images for mapping geologic features of the Gaspe Peninsula, Quebec. The specific objectives of the study were: 1) to ascertain the best procedure to follow in order to obtain valuable geologic data as a result of interpretation; and 2) to indicate in which way these data could relate to mineral exploration. Of the four spectral bands of the Multispectral scanner, the band from 700 to 800 nanometers, which seems to possess the best informational content for geologic study, was selected for analysis. The original ERTS image at a scale of 1:3,700,000 was enlarged about 15 times and reproduced on film. Geologically meaningful lines, called structural lineaments, were outlined and classified according to five categories: morpho-lithologic boundaries, morpho-lithologic lineaments, fault traces, fracture zones and undefined lineaments. Comparison with the geologic map of Gaspe shows that morpho-lithologic boundaries correspond to contacts between regional stratigraphic units. Morpholithologic lineaments follow bedding trends, whereas fracture traces appear as sets of parallel lineaments, intersecting at high angles the previous category of lineaments. Fault traces mark more precisely the location of faults already mapped and spot the presence of presumable faults, not indicated on the geologic map.

Steffensen, R.↗
NASA NTRS1973

Identification of phenological stages and vegetative types for land use classification

The author has identified the following significant results. A large grassland was located on the Kenai Peninsula which may be a potential grazing land. Two 1:250 K vegetation maps were constructed from ERTS-1 scenes 1049-20505 and 1066-20453 using 70 mm MSS chips and black and white prints for an area of 3.5 million acres. Another area (464,000 acres) was mapped using digital data. The latter map is the most accurate and detailed vegetation map of that area produced to date. Areal extents of identified vegetation types were derived for the area mapped from digital data. Early spring (prior to leafing out of deciduous trees) is suspected as being the best time for mapping Alaskan vegetation from MSS data due to the best time for mapping Alaskan vegetation from MSS data due to the radiometrically distinctness of the vegetation communities at that time. Vegetative overlays produced at 1:250 K compare favorably with vegetative maps compiled by Lloyd A. Spetzman and assembled by the joint Federal-State Land Use Planning Commission for Alaska.

Branton, C. I.↗
NASA NTRS1973

A compilation of studies from Atmospheric Variability Experiment (AVE)

Five methods for obtaining the sign of vertical motion at various levels in the atmosphere were investigated to determine which gave the best explanation for areas of rain and no-rain in the southeastern United States during the period February 19-22, 1964. The methods used were the terrain-induced vertical motion, the kinematic method including the terrain effect, the adiabatic method, the omega equation, and the vorticity equation combined with Dines' Compensation Principle. Stability and moisture availability were considered but not as extensively as vertical motion. Values of vertical motion obtained by the kinetic method, including orographic lifting produced the best agreement with the observed areas. When terms in the omega equation were added through use of constant multipliers, results comparable to the adiabatic method were obtained. Without this addition large uncertainties occurred. Maps showing areas where terms of the omega equation would indicate positive vertical motion did not correlate well with the observed rainfall patterns.

Scoggins, J. R.↗
NASA NTRS1973

Analysis of a combined refrigerator-generator space power system

Compatibility of the Brayton power and refrigeration cycles is considered. Performance of the power- and cryo-loop is plotted against compressor pressure ratio. The power- and cryo-loop performance is determined by dividing the compressor work between the two loops in proportion to mass flow rate. Cycle efficiency is defined as the ratio of shaft power available in the power loop to the net thermal input from the heat source. The available shaft power is the excess of the power turbine work over the compressor work needed in the power loop. The best power loop efficiency occurred at a compressor pressure ratio of 1.8, and the best cryo-loop performance was at a compressor pressure ratio of 2.1. Good individual cycle performance occurred over a fairly large range in compressor pressure ratio.

Klann, J. L.↗
NASA NTRS1973

A comparison of digital computer programs for the numerical solution of ordinary differential equations

Recently the determination of the best technique for numerically solving systems of ordinary differential equations on a digital computer has received much attention. The use of these formulas in conjunction with a stepsize control developed is explained, and one of the formulas is chosen for comparison with other integration techniques. This comparison of one of the best of Fehlberg's formulas with the different numerical techniques described in previous studies on a variety of test problems clearly shows the superiority of Fehlberg's formula. That is, on each of the test problems, the chosen Fehlberg formula is able to achieve a given accuracy in less computer time than any of the other techniques tested. Also, the computer program for the chosen Fehlberg formula is less complex and easier to use than the computer programs for most of the other techniques. To illustrate the use of the chosen Fehlberg formula, a computer listing of its application to several example problems is included along with a sample of the computer output from these applications.

Ingram, H. L.↗
NASA NTRS1973

The random coding bound is tight for the average code.

The random coding bound of information theory provides a well-known upper bound to the probability of decoding error for the best code of a given rate and block length. The bound is constructed by upperbounding the average error probability over an ensemble of codes. The bound is known to give the correct exponential dependence of error probability on block length for transmission rates above the critical rate, but it gives an incorrect exponential dependence at rates below a second lower critical rate. Here we derive an asymptotic expression for the average error probability over the ensemble of codes used in the random coding bound. The result shows that the weakness of the random coding bound at rates below the second critical rate is due not to upperbounding the ensemble average, but rather to the fact that the best codes are much better than the average at low rates.

Gallager, R. G.↗
NASA NTRS1973

Parametric studies of the wing flutter behavior of a STOL transport.

A computer study was conducted to evaluate the effects of variations in the principal structural parameters on the wing flutter behavior of a four-engine STOL transport configuration having relatively low inplane wing stiffness and heavy engines. The wing structure was represented by a finite-element model which included the coupling between inplane and out-of-plane motion of the wing induced by the offset engine masses. The parameters which were varied were engine mass, pylon stiffness, and the inplane stiffness of the wing. It was found that the value of inplane stiffness for best flutter performance lies substantially below the range encountered in conventional designs. For engine weights in the medium-to-heavy range, the best inplane stiffness provided a dramatic improvement in flutter performance over that for infinite inplane stiffness, while for the lightest engines the improvement was moderate.

Kyser, A. C.↗
NASA NTRS1973

Utilizing remote sensing data for land use decisions for Indian lands in South Dakota.

Evaluation of photographic and thermal infrared imagery acquired at an altitude of 11,500 ft above ground level (in southwestern South Dakota) on Oct. 15, 1970, June 30, 1971, and Aug. 2, 1971, for use in mapping range sites and soils. A density slicing system was used to enhance film optical density differences associated with range sites and soils. The range site boundaries in native rangeland areas were found to be delineated best by a density slicing analysis of color infrared film obtained in August 1971. The range site maps produced by density slicing were superior to existing range inventory maps. The density slicing analysis of color infrared film from the August 1971 flight was best for locating soil boundaries in rangeland areas. To adequately map soils in rangeland areas, data based on density slicing used in conjunction with slope gradient information derived from stereoscopic analyses provided more detailed and accurate information than is presently available from range site and soil maps of the area.

Frazee, C. J.↗
NASA NTRS1973

Contrast elements in birefringent filters.

Calculations were made to determine the effects which contrast elements of various thicknesses have in Lyot filters. A filter which is significantly narrower than the line at which it is looking produces the best results. Therefore, if the filter is broad the addition of as thick an element as possible is desired. However, if the filter is already narrow, a contrast element whose thickness equals that of the second Lyot element will produce the best performance.

Schoolman, S. A.↗
NASA NTRS1973

Application of remote sensing to study nearshore circulation

Immediate use of drogued buoy tracking was made when the Virginia State Highway Department requested assistance in selecting the best route for a new bridge-tunnel complex across the James River at Newport News. The result was that the Highway Department acted and chose a preferred route from several alternatives. It was also observed that the drogues did not follow the channel as predicted by the James River hydraulic model. This permitted telling the Navy why it is that part of their channel always silts up. The Hampton Roads Sanitation District asked help locate the best route and position of an ocean sewer outfall. Biological activities are focused primarily on delineating biological interaction between the marsh and continental shelf waters on Virginia's Eastern Shore. Information derived is helpful in categorizing the relative biological value of different marsh areas so that meaningful use and management decisions can be made concerning their eventual disposition.

Welch, C. S.↗
NASA NTRS1974

Inventory of forest and rangeland and detection of forest stress

The author has identified the following significant results. Disturbances in a forest environment that cause reductions in forest area, timber volume, and timber growth can be detected on ERTS-1 combined color composites. However, detection depends on comparing a conventional aerial photograph taken at some base year with an ERTS-1 image taken in some subsequent year. In a test made on the Atlanta site, 1:63,360 scale aerial photo index sheets made in 1966 were compared with ERTS-1 image 1264-15445 (April 1973). Five factors were found important to detection reliability: (1) the quality of the imagery; (2) the season of the imagery; (3) the size of the disturbed area; (4) the number of years since the disturbances; and (5) the type of cutting treatment. Of 209 disturbances verified on aerial photography, 165 (or approximately 80%) were detected on the ERTS-1 image by one independent interpreter. Improved training and additional experience in using this low resolution imagery should improve detection. Of the two seasons of data studies (fall and early spring), early spring is the best for detecting land use changes. Generally speaking, winter, early spring, and early summer are the best times of year for detecting forest disturbances.

Heller, R. C.↗
NASA NTRS1973

Choice: 36 band feature selection software with applications to multispectral pattern recognition

Feature selection software was developed at the Earth Resources Laboratory that is capable of inputting up to 36 channels and selecting channel subsets according to several criteria based on divergence. One of the criterion used is compatible with the table look-up classifier requirements. The software indicates which channel subset best separates (based on average divergence) each class from all other classes. The software employs an exhaustive search technique, and computer time is not prohibitive. A typical task to select the best 4 of 22 channels for 12 classes takes 9 minutes on a Univac 1108 computer.

Jones, W. C.↗
NASA NTRS1974

The experimental clean combustor program: Description and status

The objectives, program plan, schedule, pollution and performance goals, program approaches to pollution reduction, and status of the project are presented. Advanced supersonic transport and combustion noise programs are also discussed. The phases of the program consist of the following: (1) screening of low pollutant combustors, (2) refinement of the best combustors, and (3) engine demonstration of the best combustors. It is stated that all combustor designs investigated appear capable of achieving the idle pollutant goals with additional development effort.

Niedzwiecki, R. W.↗
NASA NTRS1973

Programmatic effects of utilizing various space tug options

The results are summarized of the computerized (DORCA) analyses of a number of NASA/Non-NASA and DoD payload mission models that have been used in conjunction with studies of the Space Transportation System (STS). The first analysis performed was on the 1971 NASA/Non-NASA and DoD mission models. Subsequent to that, analyses of the June 1972 excursion to the 1971 NASA/Non-NASA mission models were performed. The mission models have two basic versions; i.e., one employing expendable payloads and another employing a best mix of expendable and reusable payloads. Both versions of the models have the same payload deployment schedule. However, in the best mix version, payloads are retrieved from orbit and whenever possible, refurbished payloads are deployed. The analyses were performed to determine the relative merits to different Tug configurations and of Tug combinations employed in several phased development schemes.

Stricker, L. T.↗