Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ba”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Crystal structure, magnetic properties and bonding analysis of M 3 Pt 23 Ge 11 (M=Ca, Sr, Ba and Eu)

The properties of Pt-based materials can be intriguing due to the importance of spin-orbit coupling for Pt. Herein, we report four new phases with formulas M 3 Pt 23 Ge 11 (M ​= ​Ca, Sr, Ba and Eu), which adopt the same structure type as Ce3Pt23Si11. Magnetic susceptibility measurements indicate that none of the phases is superconducting above 1.8 ​K, while for Eu 3 Pt 23 Ge 11 ferromagnetic ordering is observed at ~ 3 ​K. The low Curie temperature for that material compared to that of Eu 3 Pt 23 Si 11 may be due to its larger Eu–Eu distance. One potential factor that destabilizes the structure of other rare-earth based M 3 Pt 23 Ge 11 is demonstrated through COHP calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

La$_{2-x}$Ba$_x$CuO$_4$ as a superconducting Rosetta Stone

The high-temperature superconductivity in layered cuprates discovered by Bednorz and Müller arrived as a shock. Gradually, the presence of competing orders, such as antiferromagnetism and charge order, were discovered; however, the relationship to the superconductivity has been confusing. Importantly, it so happens that the original cuprate superconductor family La$_{2-x}$Ba$_x$CuO$_4$ contains all of the relevant phases, with extreme competition among them, and analysis of these phases provides strong clues to the nature of the superconductivity in cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Air separation and N 2 purification with Ba 0.15 Sr 0.85 FeO 3-$δ$ via a two-step thermochemical process

Thermochemical air separation to produce high-purity N 2 was demonstrated in a vertical tube reactor via a two-step reduction–oxidation cycle with an A-site substituted perovskite Ba 0.15 Sr 0.85 FeO 3–δ (BSF1585). BSF1585 particles were synthesized and characterized in terms of their chemical, morphological, and thermophysical properties. A thermodynamic cycle model and sensitivity analysis using computational heat and mass transfer models of the reactor were used to select the system operating parameters for a concentrating solar thermal-driven process. Thermal reduction up to 800 °C in air and temperature-swing air separation from 800 °C to minimum temperatures between 400 and 600 °C were performed in the reactor containing a 35 g packed bed of BSF1585. The reactor was characterized for dispersion, and air separation was characterized via mass spectrometry. Gas measurements indicated that the reactor produced N 2 with O 2 impurity concentrations as low as 0.02 % for > 30 min of operation. Additionally, a parametric study of air flow rates suggested that differences in observed and thermodynamically predicted O 2 impurities were due to imperfect gas transport in the bed. Temperature swing reduction/oxidation cycling experiments between 800 and 400 °C in air were conducted with no statistically significant degradation in N 2 purity over 50 cycles.

14 SOLAR ENERGY↗
DOE OSTI2022

Overcoming significant challenges in extracting off-stoichiometric thermodynamics using the compound energy formalism through complementary use of experimental and first principles data: A case study of Ba 1-x Sr x FeO 3-δ

The compound energy formalism (CEF) is a powerful framework to describe the thermodynamics of metal oxides as a function of off-stoichiometry, temperature, and composition. The thermodynamic properties are crucial materials design attributes in metal oxide-based oxygen-exchange chemical processes. Despite the richness of information an accurate CEF model provides, a method to determine a unique and accurate fit for oxygen exchange materials remains elusive. This contribution details a method for fitting the CEF model that overcomes the current fitting challenges through three innovations: 1) the combination of density functional theory calculations with experimental data decorrelates excess terms and delineates the enthalpic/entropic contributions to the Gibbs free energy; 2) a systematic determination of the important CEF model terms, removing thermodynamic predetermining human intervention; 3) a self-consistent solution of the starting oxygen offstoichiometry (δ 0 ) of thermogravimetric measurements. Thus, our method enables the reliable extraction of off-stoichiometric metal oxide thermodynamic properties and facilitates rapid materials compositional screening, and reliable process design of systems dependent on off-stoichiometric redox-active metal oxides. We apply this method to a Ba x Sr 1-x FeO 3-δ test case. We find by systematically examining the performance of the CEF model fit with and without each innovation that all three innovations are necessary for an accurate fit. We determined that reduction enthalpy is higher and more sensitive to off-stoichiometry when the Sr fraction is large (139.5 and 185.3 kJ/mol O 2 for SrFeO 3 at δ = 0 and δ = 0.5, respectively vs. nearly constant 83 kJ/mol O 2 for BaFeO 3 ). However, the reduction entropy is mostly insensitive to Sr fraction, but highly dependent on δ suggesting larger contributions in the non-configurational entropy parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Solid-State Calcium-Ion Diffusion in Ca 1.5 Ba 0.5 Si 5 O 3 N 6

Rechargeable batteries based on multivalent working ions are promising candidates for next-generation high-energy-density batteries. Development of these technologies, however, is largely limited by the low diffusion rate of multivalent ions in solid-state materials, thereby necessitating a better understanding of the design principles that control multivalent-ion mobility. We report Ca 1.5 Ba 0.5 Si 5 O 3 N 6 as a potential calcium solid-state conductor and investigate its Ca migration mechanism by means of ab initio computations and neutron diffraction. This compound contains partially occupied Ca sites in close proximity to each other, providing a unique mechanism for Ca migration. Nuclear density maps obtained with the maximum entropy method from neutron powder diffraction data provide strong evidence for low-energy percolating one-dimensional pathways for Ca-ion migration. Ab initio molecular dynamics simulations further support a low Ca-ion migration barrier of ~400 meV when Ca vacancies are present and reveal a unique "vacancy-adjacent"concerted ion migration mechanism. This work provides a new understanding of solid-state Ca-ion diffusion and insights into the future design of novel cation configurations that utilize the interactions between mobile ions to enable fast multivalent-ion conduction in solid-state materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Thermal and Electronic Properties of Ba 2 MnSe 3

The structural, thermal, and electronic properties of Ba 2 MnSe 3 were investigated. Analysis of the low-temperature heat capacity revealed a low Debye temperature and a low average speed of sound that, together with the bonding in this material, result in a low thermal conductivity over a relatively large temperature range. Density functional theory and calculated electron localization were employed to investigate the electronic structure and bonding. Absorption and photoluminescence spectroscopy measurements corroborated our calculations and revealed a direct band gap of 1.75 eV. This study expands on our understanding of the physical properties of this material and reveals previously unascertained properties, the knowledge of which is imperative for any potential application of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Competing Magnetic Interactions and the Role of Unpaired 4 f Electrons in Oxygen-Deficient Perovskites Ba 3 R Fe 2 O 7.5 ( R = Y, Dy)

Oxygen-deficient perovskite compounds with the general formula Ba 3 RFe 2 O 7.5 present a good opportunity to study competing magnetic interactions between Fe 3+ 3d cations with and without the involvement of unpaired 4f electrons on R 3+ cations. From analysis of neutron powder diffraction data, complemented by ab initio density functional theory calculations, we determined the magnetic ground states when R 3+ = Y 3+ (non-magnetic) and Dy 3+ (4f 9 ). They both adopt complex long-range ordered antiferromagnetic structures below T N = 6.6 and 14.5 K, respectively, with the same magnetic space group C a 2/c (BNS #15.91). However, the dominant influence of f-electron magnetism is clear in temperature dependence and differences between the size of the ordered moments on the two crystallographically independent Fe sites, one of which is enhanced by R–O–Fe superexchange in the Dy compound, while the other is frustrated by it. We report the Dy compound also shows evidence for temperature- and field-dependent transitions with hysteresis, indicating a field-induced ferromagnetic component below TN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Room-Temperature Ferroelectric LiNb 6 Ba 5 Ti 4 O 30 Spinel Phase in a Nanocomposite Thin Film Form for Nonlinear Photonics

Tetragonal tungsten bronze (TTB) materials are one of the most promising classes of materials for ferroelectric and nonlinear optical devices, owing to their very unique noncentrosymmetric crystal structure. In this work, a new TTB phase of LiNb 6 Ba 5 Ti 4 O 30 (LNBTO) has been discovered and studied. A small amount of a secondary phase, LiTiO 2 (LTO), has been incorporated as nanopillars that are vertically embedded in the LNBTO matrix. The new multifunctional nanocomposite thin film presents exotic highly anisotropic microstructure and properties, e.g., strong ferroelectricity, high optical transparency, anisotropic dielectric function, and strong optical nonlinearity evidenced by the second harmonic generation results. An optical waveguide structure based on the stacks of α-Si on SiO 2 /LNBTO–LTO has been fabricated, exhibiting low optical dispersion with an optimized evanescent field staying in the LNBTO–LTO active layer. Lastly, this work highlights the combination of new TTB material designs and vertically aligned nanocomposite structures for further enhanced anisotropic and nonlinear properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Ba 6 Cu 31 Te 22 ( A = K, Rb, Cs) Featuring Polyanionic Copper–Telluride Frameworks with Ultralow Thermal Conductivity

In this study, hree polyanionic tellurides, ABa 6 Cu 31 Te 22 (A = K, Rb, Cs), were synthesized in salt flux. The isostructural tellurides crystallize in a new structure type, in the cubic Pa$\overline{3}$ space group with a Wyckoff sequence of d 10 c 2 b 1 and large unit cell volumes of over 5500 Å 3 . The structures feature a framework of [CuTe 4 ] tetrahedra and [CuTe 3 ] trigonal pyramids with disorder in the Cu sites. The polyanionic frameworks have large square antiprism and cuboctahedral voids where Ba and alkali metal cations are situated, forming [BaTe 8 ] and [ATe 12 ], respectively. The overall compositions are close to being charge balanced. The large [ATe 12 ] cuboctahedra allowed for significant anisotropic displacement of the A cations, as observed from both single crystal X-ray diffraction and heat capacity studies. Alkali cations rattling together with Cu atom displacement and disorder leads to the dispersion of phonons, thus softening the lattice and subsequently reducing the thermal conductivity. Evaluations of the electronic band structure revealed the occurrence of a narrow bandgap together with the presence of a flat band near the valence band maximum, giving rise to the high thermopower. The Cs and Rb analogues show a slope change in the temperature dependence of electrical resistivity around room temperature, which is typical for semimetals or degenerate semiconductors. For the as-synthesized and unoptimized materials, high values of the thermoelectric figure-of-merit of ~0.2 were observed at 623 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ba +2 ion trapping using organic submonolayer for ultra-low background neutrinoless double beta detector

If neutrinos are their own antiparticles the otherwise-forbidden nuclear reaction known as neutrinoless double beta decay can occur. The very long lifetime expected for these exceptional events makes its detection a daunting task. In order to conduct an almost background-free experiment, the NEXT collaboration is investigating novel synthetic molecular sensors that may capture the Ba dication produced in the decay of certain Xe isotopes in a high-pressure gas experiment. The use of such molecular detectors immobilized on surfaces must be explored in the ultra-dry environment of a xenon gas chamber. Here, using a combination of highly sensitive surface science techniques in ultra-high vacuum, we demonstrate the possibility of employing the so-called Fluorescent Bicolor Indicator as the molecular component of the sensor. We unravel the ion capture process for these molecular indicators immobilized on a surface and explain the origin of the emission fluorescence shift associated to the ion trapping.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Understanding temperature-dependent SU(3) spin dynamics in the S = 1 antiferromagnet Ba 2 FeSi 2 O 7

Quantum magnets admit more than one classical limit and N-level systems with strong single-ion anisotropy are expected to be described by a classical approximation based on SU(N) coherent states. Here we test this hypothesis by modeling finite temperature inelastic neutron scattering (INS) data of the effective spin-one antiferromagnet Ba 2 FeSi 2 O 7 . The measured dynamic structure factor is calculated with a generalized Landau-Lifshitz dynamics for SU(3) spins. Unlike the traditional classical limit based on SU(2) coherent states, the results obtained with classical SU(3) spins are in good agreement with the measured temperature dependent spectrum. The SU(3) approach developed here provides a general framework to understand the broad class of materials comprising weakly coupled antiferromagnetic dimers, trimers, or tetramers, and magnets with strong single-ion anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Conformally coated scaffold design using water-tolerant Pr 1.8 Ba 0.2 NiO 4.1 for protonic ceramic electrochemical cells with 5,000-h electrolysis stability

Protonic ceramic electrochemical cells (PCECs) have potential as long-duration energy storage systems. However, their operational stability is limited under industrially relevant conditions due to the intrinsic chemical instability of doped barium cerate-based electrolytes and oxygen electrodes against H 2 O, as well as the poor electrode–electrolyte interfacial contact. Here, in this study, we present a conformally coated scaffold (CCS) design to comprehensively address these issues. A porous proton-conducting scaffold is constructed and conformally coated with Pr 1.8 Ba 0.2 NiO 4.1 electrocatalyst, which has high chemical stability against H 2 O, triple conductivity and hydration capability, and protects vulnerable electrolytes from H 2 O. The CCS structure consolidates the electrode–electrolyte interfacial bonding to enable fast proton transfer in the percolated network. This design enables PCECs to reach electrolysis stability for 5,000 h at −1.5 A cm−2 and 600 °C in 40% H 2 O. This work provides a general strategy to stabilize PCECs and offers guidance for designing resilient and stable solid-state energy storage systems.

Protonic ceramic electrochemical cell↗
DOE OSTI2025

Contrasting c -axis and in-plane uniaxial stress effects on superconductivity and stripe order in La 1.885 Ba 0.115 CuO 4

The cuprate superconductor La 2−x Ba x CuO 4 (LBCO) near x = 0.125 is a striking example of intertwined electronic orders, where 3D superconductivity is anomalously suppressed, allowing spin and charge stripe order to develop. Understanding this interplay remains a key challenge in cuprates, highlighting the necessity of external tuning for deeper insight. While in-plane uniaxial stress enhances superconductivity and suppresses stripe order, the effects of c -axis compression remains largely unexplored. Here, we use muon spin rotation ( μ SR) and AC susceptibility with an in situ piezoelectric stress device to investigate the spin-stripe order and superconductivity in LBCO-0.115 under c-axis compression. The measurements reveal a gradual suppression of the superconducting transition temperature ( T c ) with increasing c -axis stress, in stark contrast to the strong enhancement observed under in-plane stress. We further show that while in-plane stress rapidly reduces both the magnetic volume fraction ( V m ) and the spin-stripe ordering temperature ( T so ), c-axis compression has no effect, with V m and T so exhibiting an almost unchanged behavior up to the highest applied stress of 0.21 GPa. These findings demonstrate a strong anisotropy in stress response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Structural and thermal properties of ultralow thermal conductivity Ba 3 Cu 2 Sn 3 Se 10

The thermal properties of Ba 3 Cu 2 Sn 3 Se 10 were investigated by measurement of the thermal conductivity and heat capacity. The chemical bonding in this diamagnetic material was investigated using structural data from Rietveld refinement and calculated electron localization. This quaternary chalcogenide is monoclinic (P2 1 /c), has a large unit cell with 72 atoms in the primitive cell, and a high local coordination environment. Additionally, the Debye temperature (162 K) and average speed of sound (1666 m s -1 ) are relatively low with a very small electronic contribution to the heat capacity. Ultralow thermal conductivity (0.46 W m -1 K -1 at room temperature) is attributed to the relatively weak chemical bonding and intrinsic anharmonicity, in addition to a large unit cell. This work is part of the continuing effort to explore quaternary chalcogenides with intrinsically low thermal conductivity and identify the features that result in a low thermal conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enhanced surface superconductivity in Ba(Fe 0.95 Co 0.05 ) 2 As 2

We present direct evidence for an enhanced superconducting Tc on the surface of cleaved single crystals of Ba(Fe 0.95 Co 0.05 ) 2 As 2 . Transport measurements performed on samples cleaved in ultra-high vacuum show a significantly enhanced superconducting transition when compared to equivalent measurements performed in air. Deviations from the bulk resistivity appear at 21 K, well above the 10 K bulk Tc of the underdoped compound. We demonstrate that the excess conductivity above the bulk Tc can be controllably suppressed by application of potassium ions on the cleaved surface, indicating that the enhanced superconductivity is strongly localized to the sample surface. Additionally, we find that the effects of the potassium surface dosing are strongly influenced by the presence of residual gas absorbates on the sample surface, which may prevent effective charge transfer from the potassium atoms to the FeAs plane. This further supports the conclusion that the effects of the dosing (and enhanced superconductivity) are localized within a few layers of the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Elastocaloric evidence for a multicomponent superconductor stabilized within the nematic state in Ba(Fe 1− x Co x ) 2 As 2

The iron-based high-$T_c$ superconductors (SCs) exhibit rich phase diagrams with intertwined phases, including magnetism, nematicity, and superconductivity. The superconducting $T_c$ in many of these materials is maximized in the regime of strong nematic fluctuations, making the role of nematicity in influencing the superconductivity a topic of intense research. Here, in this study, we use the AC elastocaloric effect (ECE) to map out the phase diagram of Ba(Fe 1− x Co x ) 2 As 2 near optimal doping. The ECE signature at $T_c$ on the overdoped side, where superconductivity condenses without any nematic order, is quantitatively consistent with other thermodynamic probes that indicate a single-component superconducting state. In contrast, on the slightly underdoped side, where superconductivity condenses within the nematic phase, ECE reveals a second thermodynamic transition proximate to and below $T_c$. We rule out magnetism and reentrant tetragonality as the origin of this transition and find that our observations strongly suggest a phase transition into a multicomponent superconducting state. This implies the existence of a subdominant pairing instability that competes strongly with the dominant $s^±$ instability. Our results highlight the significant role of nematic order in determining the pairing symmetry close to optimal doping in this extensively studied iron-based SC, while also demonstrating the power of ECE in uncovering strain-tuned phase diagrams of quantum materials.

Ghosh, Sayak [Stanford University, CA (United Stat↗
DOE OSTI2023

In-field strain and temperature measurements in a (RE)Ba 2 Cu 3 O 7–x coil via Rayleigh-backscattering interrogated optical fibers

(RE)Ba 2 Cu 3 O 7-x (REBCO) conductors have overcome technical challenges related to manufacturing quality, length homogeneity, scale-up of piece-length, and joints. There is one remaining technical challenge, however, which is common to all high temperature superconductors and lies in effective detection of failure to prevent material degradation. An innovative technique based on optical fibers interrogated by Rayleigh backscattering has been shown to have advantages over voltage taps at detecting incipient faults. Prior work has experimentally demonstrated the technique in several implementation scenarios, including direct integration of optical fibers into superconducting conductors and cables to create a class of ‘SMART’ conductors and cables that are able to monitor their own health. In this paper, the magnet monitoring technique based on Rayleigh backscattering interrogated optical fibers has been experimentally studied in a model coil subject to external magnetic field, where different fiber integration methods are used to increase selectivity of the fiber sensor to temperature. Results show that the spectral shift displays different features during strain and thermal transients. The implications of the results in terms of potential and limitations of each sensor as well as strain-temperature decoupling are discussed.

36 MATERIALS SCIENCE↗