Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BOUNDARY CONDITIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

K{yields}({pi}{pi}){sub I=2} decays and twisted boundary conditions

We propose a new method to evaluate the Lellouch-Luescher factor which relates the {Delta}I=3/2 K{yields}{pi}{pi} matrix elements computed on a finite lattice to the physical (infinite-volume) decay amplitudes. The method relies on the use of partially twisted boundary conditions, which allow the s-wave {pi}{pi} phase shift to be computed as an almost continuous function of the center-of-mass relative momentum and hence for its derivative to be evaluated. We successfully demonstrate the feasibility of the technique in an exploratory computation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NUMERICAL AND ANALYTICAL SOLUTIONS OF NEUTRINO-DOMINATED ACCRETION FLOWS WITH A NON-ZERO TORQUE BOUNDARY CONDITION AND ITS APPLICATIONS IN GAMMA-RAY BURSTS

A stellar-mass black hole (BH) surrounded by a neutrino-dominated accretion flow (NDAF) has been discussed in a number of works as the central engine of gamma-ray bursts (GRBs). It is widely believed that NDAF cannot liberate enough energy for bright GRBs. However, these works have been based on the assumption of a “no torque” boundary condition, which is invalid when the disk is magnetized. In this paper, we present both numerical and analytical solutions for NDAFs with non-zero boundary stresses and reexamine their properties. We find that an NDAF with such a boundary torque can be powerful enough to account for those bright short GRBs, energetic long GRBs, and ultra-long GRBs. The disk becomes viscously unstable, which makes it possible to interpret the variability of GRB prompt emission and the steep decay phase in the early X-ray afterglow. Finally, we study the gravitational waves radiated from a processing BH-NDAF. We find that the effects of the boundary torque on the strength of the gravitational waves can be ignored.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulation of confined magnetohydrodynamic flows with Dirichlet boundary conditions using a pseudo-spectral method with volume penalization

A volume penalization approach to simulate magnetohydrodynamic (MHD) flows in confined domains is presented. Here the incompressible visco-resistive MHD equations are solved using parallel pseudo-spectral solvers in Cartesian geometries. The volume penalization technique is an immersed boundary method which is characterized by a high flexibility for the geometry of the considered flow. In the present case, it allows to use other than periodic boundary conditions in a Fourier pseudo-spectral approach. The numerical method is validated and its convergence is assessed for two- and three-dimensional hydrodynamic (HD) and MHD flows, by comparing the numerical results with results from literature and analytical solutions. The test cases considered are two-dimensional Taylor–Couette flow, the z-pinch configuration, three dimensional Orszag–Tang flow, Ohmic-decay in a periodic cylinder, three-dimensional Taylor–Couette flow with and without axial magnetic field and three-dimensional Hartmann-instabilities in a cylinder with an imposed helical magnetic field. Finally, we present a magnetohydrodynamic flow simulation in toroidal geometry with non-symmetric cross section and imposing a helical magnetic field to illustrate the potential of the method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Conservative discontinuous Galerkin interpolation: Sheared boundary conditions

Local studies of accretion disks and laboratory magnetized plasmas employ analytical coordinate mappings that introduce sheared boundary conditions (BCs). Here, we present a discontinuous Galerkin (DG) algorithm to apply such BCs based on projections and quadrature-free integration. The procedure is high-order accurate, preserves moments exactly and works in multiple dimensions. Tests of increasing complexity are provided, beginning with translations of one and two dimensional fields, followed by 3D and 5D simulations with sheared (twist-shift) BCs. Results show that the algorithm is (p + 1)-order accurate in the DG representation and (p + 2) -order accurate in the cell averages, with p being the order of the polynomial basis. Quantification of the algorithm's hyperdiffusion and discussion of aliasing errors are given. This technique enables conservative local simulations of plasma turbulence with DG, not possible until now.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Micromagnetic simulations with periodic boundary conditions: Hard-soft nanocomposites

Here, we developed a micromagnetic method for modeling magnetic systems with periodic boundary conditions along an arbitrary number of dimensions. The main feature is an adaptation of the Ewald summation technique for evaluation of long-range dipolar interactions. The method was applied to investigate the hysteresis process in hard-soft magnetic nanocomposites with various geometries. The dependence of the results on different micromagnetic parameters was studied. We found that for layered structures with an out-of-plane hard phase easy axis the hysteretic properties are very sensitive to the strength of the interlayer exchange coupling, as long as the spontaneous magnetization for the hard phase is significantly smaller than for the soft phase. The origin of this behavior was discussed. Additionally, we investigated the soft phase size optimizing the energy product of hard-soft nanocomposites.

36 MATERIALS SCIENCE↗

Well-posedness of one-way wave equations and absorbing boundary conditions

The one-way wave equations occurring in geophysics, underwater acoustics, and numerical studies involving absorbing boundary conditions are characterized analytically. The conditions under which such equations are well posed are obtained by examining the rational functions used to reduce them. Results are presented for Chebyshev, Pade, least-squares, and symmetric least-squares approximations.

Trefethen, Lloyd N.↗

Finite size effects in ferroelectric-semiconductor thin films under open-circuit electric boundary conditions

General features of finite size effects in the ferroelectric-semiconductor film under open-circuit electric boundary conditions are analyzed using Landau-Ginzburg-Devonshire theory and continuum media electrostatics. The temperature dependence of the film critical thickness, spontaneous polarization and depolarization field profiles of the open-circuited films are found to be significantly different from the characteristics of short-circuited ones. In particular, we predict the re-entrant type transition boundary between the mono-domain and poly-domain ferroelectric states due to reduced internal screening efficiency and analyzed possible experimental scenarios created by this mechanism. Performed analysis is relevant for the quantitative description of free-standing ferroelectric films phase diagrams and polar properties. Also our results can be useful for the explanation of the scanning-probe microscopy experiments on free ferroelectric surfaces.

36 MATERIALS SCIENCE↗

Boundary conditions for multistep finite-difference methods for time-dependent equations

The stability and accuracy of various boundary treatments are analyzed for the two-step Richtmyer and MacCormack methods. Special attention is paid to ways of imposing the extra boundary conditions after the first step of the two-step process. The theory of Kreiss is used to study stability properties for both scalar and vector equations. The theory of Skollermo is used to compare accuracies of the various methods. Computations were also performed on both wavelike equations and on systems that approach a steady state. Several suggestions are given for more reliable boundary treatments.

Gottlieb, D.↗

Artificial Boundary Conditions Based on the Difference Potentials Method

While numerically solving a problem initially formulated on an unbounded domain, one typically truncates this domain, which necessitates setting the artificial boundary conditions (ABC's) at the newly formed external boundary. The issue of setting the ABC's appears to be most significant in many areas of scientific computing, for example, in problems originating from acoustics, electrodynamics, solid mechanics, and fluid dynamics. In particular, in computational fluid dynamics (where external problems present a wide class of practically important formulations) the proper treatment of external boundaries may have a profound impact on the overall quality and performance of numerical algorithms. Most of the currently used techniques for setting the ABC's can basically be classified into two groups. The methods from the first group (global ABC's) usually provide high accuracy and robustness of the numerical procedure but often appear to be fairly cumbersome and (computationally) expensive. The methods from the second group (local ABC's) are, as a rule, algorithmically simple, numerically cheap, and geometrically universal; however, they usually lack accuracy of computations. In this paper we first present a survey and provide a comparative assessment of different existing methods for constructing the ABC's. Then, we describe a relatively new ABC's technique of ours and review the corresponding results. This new technique, in our opinion, is currently one of the most promising in the field. It enables one to construct such ABC's that combine the advantages relevant to the two aforementioned classes of existing methods. Our approach is based on application of the difference potentials method attributable to V. S. Ryaben'kii. This approach allows us to obtain highly accurate ABC's in the form of certain (nonlocal) boundary operator equations. The operators involved are analogous to the pseudodifferential boundary projections first introduced by A. P. Calderon and then also studied by R. T. Seeley. The apparatus of the boundary pseudodifferential equations, which has formerly been used mostly in the qualitative theory of integral equations and PDE'S, is now effectively employed for developing numerical methods in the different fields of scientific computing.

Tsynkov, Semyon V.↗

Sensitivity derivatives for static test loading boundary conditions

Attention is given to the application of the adjoint variable method under the special combination of displacement and stress boundary conditions which occur when static test conditions are simulated. In the two-step problem-solving method employed, calculation of internal stresses, displacements and total reaction force at the boundary is followed by the calculation of the applied load and the total reaction force due to unit displacements.

Gurdal, Z.↗

Numerical and boundary condition effects on the prediction of detonation engine behavior using detailed numerical simulations

High-fidelity numerical simulations of an experimental rotating detonation engine with discrete fuel/air injection were conducted. A series of configurations with different feed-plenum pressures but with constant equivalence ratio were studied. Detailed chemical kinetics for the hydrogen/air system is used. A resolution study for the full rotating detonation engine (RDE) system simulation is also conducted. Two kinds of boundary conditions, a total pressure boundary and a constant mass flow rate boundary, are used to assess the effects of the inlet boundary. As mass flow rate is increased, the total pressure boundary causes more error in the axial pressure distribution while the constant mass flow rate gives a better solution for all cases ran. The simulations confirm experimental findings, and reproduce qualitative as well as some of the quantitative trends. These results demonstrate that a) fuel-air mixing is highly non-uniform within the detonation chamber, leading to variations in local equivalence ratio, b) the fuel and oxidizer injectors experience significant backflow as the detonation wave passes over, but recover at different rates which further augments the inefficiencies in mixing, and c) parasitic combustion in the mixing region makes the detonation wave weak by extending the reaction zone across the wave.

33 ADVANCED PROPULSION SYSTEMS↗

Suppression of drift wave turbulence and zonal flow formation by changing axial boundary conditions in a cylindrical magnetized plasma device

For drift wave turbulence, due to charge conservation, the divergence of the parallel current is coupled to the divergence of the perpendicular polarization current, which determines the effective radial momentum flux, i.e., the Reynolds stress. Changes in the current flow patterns also affect the nonlinear energy transfer from smaller to larger scales. Here, we show that by changing the end plate boundary conditions in a cylindrical plasma device, the radial currents through the plasma and hence the net momentum transport and the nonlinear coupling for the inverse energy transfer are strongly modified. The transition to drift wave turbulence and the formation of low frequency zonal flows can be either suppressed with conducting boundaries or enhanced with insulating boundaries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analytic theory of curvature effects for wave problems with general boundary conditions

A formalism based on a combination of differential geometry and perturbation theory is used to obtain analytic expressions for confined eigenmode changes due to general curvature effects. In cases of circular-shaped and helix-shaped structures, where alternative analytic solutions can be found, the perturbative solution is shown to yield the same result. The present technique allows the generalization of earlier results to arbitrary boundary conditions. The power of the method is illustrated using examples based on Maxwell's and Schroedinger's equations for applications in photonics and nanoelectronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

R-matrix approach with proper boundary conditions for dissipative and nondissipative collision processes

We develop an R-matrix approach to treating collision processes which explicitly takes into account, by means of a simple energy-dependent analytic function, the out-of-phase oscillations of the incident and scattered standing waves in the interior region. Thereby we avoid the use of the Bloch operator. In place of the Bloch operator the incident wave provides the source term in an inhomogeneous equation for the scattered wave. We take those subchannels not treated exactly into account via the optical potential, which is generally non-Hermitian due to dissipation at the boundary. The optical potential is constructed on a real analytic basis using a resolvent that satisfies outgoing-wave boundary conditions. The use of an analytic basis together with the direct determination of the K matrix, rather than the R matrix, at the boundary (this is done by matching the interior wave function to the nearly exact analytic solution beyond the boundary) makes the method particularly well suited to the treatment of ultracold collisions. We have tested our method by applying it to one-photon single-ionization of (He1s{sup 2}) accompanied by excitation to He{sup +}(2s) or He{sup +}(2p) for photon energies above the complete breakup threshold, where the optical potential is non-Hermitian. Excellent agreement with experiment is obtained for the cross sections for photoionization to both He{sup +} (n=1) and to He{sup +} (n=2). The 2s-to-2p branching ratio is strongly influenced by both the optical potential and, at photon energies less than a few tens of eV above the breakup threshold, the nonadiabatic dipole mixing of the 2s and 2p states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simplified model for determining local heat flux boundary conditions for slagging wall

In this work, two models for calculating heat transfer through a cooled vertical wall covered with a running slag layer are investigated. The first one relies on a discretization of the velocity equation, and the second one relies on an analytical solution. The aim is to find a model that can be used for calculating local heat flux boundary conditions in computational fluid dynamics (CFD) analysis of such processes. Two different cases where molten deposits exist are investigated: the black liquor recovery boiler and the coal gasifier. The results show that a model relying on discretization of the velocity equation is more flexible in handling different temperature-viscosity relations. Nevertheless, a model relying on an analytical solution is the one fast enough for a potential use as a CFD submodel. Furthermore, the influence of simplifications to the heat balance in the model is investigated. It is found that simplification of the heat balance can be applied when the radiation heat flux is dominant in the balance. 9 refs., 7 figs., 10 tabs.

01 COAL, LIGNITE, AND PEAT↗

More About Multiple-Boundary-Condition Testing

Measured shapes of vibrational modes used to update mathematical models. Report extends discussion of multiple-boundary-condition vibrational testing techniques. Emphasis on further refinement of mathematical model by use of differences between measured eigenvectors and eigenvectors predicted by model to be refined.

Kuo, Chin-Po↗