Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BIOFUELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Root water uptake of biofuel crops revealed by coupled electrical resistivity and soil water content measurements

Abstract Biofuel crops, including annuals such as maize ( Zea mays L.), soybean [ Glycine max (L.) Merr.], and canola ( Brassica napus L.), as well as high‐biomass perennial grasses such as miscanthus ( Miscanthus × giganteus J.M. Greef & Deuter ex Hodkinson & Renvoiz), are candidates for sustainable alternative energy sources. However, large‐scale conversion of croplands to perennial biofuel crops could have substantial impacts on regional water, nutrient, and C cycles due to the longer growing seasons and differences in rooting systems compared with most annual crops. However, due to the limited tools available to nondestructively study the spatiotemporal patterns of root water uptake in situ at field scales, these differences in crop water use are not well known. Geophysical imaging tools such as electrical resistivity (ER) reveal changes in water content in the soil profile. In this study, we demonstrate the use of a novel coupled hydrogeophysical approach with both time domain reflectometry soil water content and ER measurements to compare root water uptake and soil properties of an annual crop rotation with the perennial grass miscanthus, across three growing seasons (2009–2011) in southwest Michigan, USA. We estimated maximum root depths to be between 1.2 and 2.2 m, with the vertical distribution of roots being notably deeper in 2009 relative to 2010 and 2011, likely due to the drought conditions during that first year. Modeled cumulative ET of both crops was underestimated (2–34%) relative to estimates obtained from soil water drawdown in prior studies but was found to be greater in the perennial grass than the annual crops, despite shallower modeled rooting depths in 2010 and 2011.

Kuhl, Alexandria S.↗

One-pot bioconversion of algae biomass into terpenes for advanced biofuels and bioproducts

In this study, rising demand for transportation fuels, diminishing reserved of fossil oil, and the concerns with fossil fuel derived environmental pollution as well as the green-house gas emission derived climate change have resulted in the compelling need for alternative, sustainable new energy sources(1). Algae-based biofuels have been considered one of the promising alternatives to fossil fuels as they can overcome some of these issues (2-4). The current state-of-art of algal biofuel technologies have primarily focused on biodiesel production through prompting high algal lipid yields under the nutrient stress conditions. There are less interests of using algae-based carbohydrate and proteins as carbon sources for the fermentative production of liquid fuel compounds or other high-value bioproducts(5-7).

09 BIOMASS FUELS↗

Elucidating the Unique Physiological Responses of Halotolerant Scenedesmus sp. Cultivated in Sea Water for Biofuel Production

Utilization of saline or sea water for large-scale cultivation of microalgae can potentially provide a leap towards the reduction of both cost and sustainability challenges for biofuel production. The present investigation evaluated the temporal changes in carbohydrates and fatty acids of a halotolerant microalga Scenedesmus sp. IITRIND2 grown in natural seawater salinity to delineate the differential physiological response towards salt stress and subsequent potential for biofuel production. The microalga showed remarkable ability to tolerate different salinity environments under given temperature and light conditions. Such tolerance was attributed to the increase in neutral sugars, such as glucose, mannose, galactose, fucose and ribose, associated with both structural and storage (and potentially osmoprotectant) polymeric carbohydrates. The carbohydrate rearrangements may aid in the remodeling of cellular components to circumvent the detrimental effects of high salinity. The observed high carbohydrate and lipid accumulation in this microalga signifies its potential for integrated bioethanol and biodiesel production. This work provides a basic understanding towards high salinity adaption of Scenedesmus sp. IITRIND2, which could further be explored for identifying targets for halotolerance in other microalgal strains.

09 BIOMASS FUELS↗

Can upstream biofuel production increase the flow of downstream ecosystem goods and services?

Here, advanced biomass feedstocks tend to provide more non-fuel ecosystem goods and services (ES) than 1st-generation alternatives. We explore the idea that payment for non-fuel ES could facilitate market penetration of advanced biofuels by closing the profitability gap. As a specific example, we discuss the Mississippi-Atchafalaya River Basin (MARB), where 1st-generation bioenergy feedstocks (e.g., corn-grain) have been integrated into the agricultural landscape. Downstream, the MARB drains to the Gulf of Mexico, where the most-valuable fishery in the US is impacted by annual formation of a large hypoxic “Dead zone.” We suggest that advanced biomass production systems in the MARB can increase and stabilize the provision of ES derived from the coastal and marine ecosystems of the Gulf-of-Mexico. Upstream, we suggest that choosing feedstocks based on their resistance or resilience to disturbance (e.g., perennials, diverse feedstocks) can increase reliability in ES provision over time. Direct feedbacks to incentivize producers of advanced feedstocks are currently lacking. Perhaps a shift from first-generation biofuels to perennial-based fuels and other advanced bioenergy systems (e.g., algal diesel, biogas from animal wastes) can be encouraged by bringing downstream environmental externalities into the market for upstream producers. In future, we can create such feedbacks through payments for ES, but significant research is needed to pave the way.

09 BIOMASS FUELS↗

Effects of fertilization, plant species, and intra-specific diversity on soil carbon and nitrogen in biofuel cropping systems after five growing seasons

Land-use change for bioenergy production can release greenhouse gases (GHG) through disturbance of soil carbon (C) pools, but use of native species with extensive root systems as bioenergy crops may help mitigate GHG emissions by enhancing soil C sequestration. Here, we investigated how (1) fertilization, (2) plant species and cultivars, and (3) inter- and intra-specific diversity affect soil C and N accumulation five growing seasons after conversion of an old-field dominated by C 3 grasses to a grassland dominated by C 4 perennial grasses managed for biofuel production. We manipulated diversity at both the species- and cultivar level, and applied nitrogen (N) at two levels (0 and 67 kg ha –1 ). Establishment of C 4 grass treatments on soils that supported C 3 pasture grasses for 36 years enabled us to use the natural abundance C isotope ratio technique to estimate the contribution of new C 4 plant-derived C to soil organic matter pools. Our study yielded three main results: 1) annual fertilization did not significantly affect soil C and N concentrations after five growing seasons; 2) increasing inter- and intra-specific diversity did not significantly increase soil C and N concentrations; 3) cultivar- and species identity influenced C 4 -derived C and total soil C concentrations: big bluestem dominated stands exhibited greater soil C accrual relative to stands dominated by switchgrass and mixed-species treatments. Here, future research is needed to further assess how big bluestem can aid in the sustainable provisioning of second generation biofuel feedstocks.

09 BIOMASS FUELS↗

Production of biofuels and chemicals from xylose using native and engineered yeast strains

Numerous metabolic engineering strategies have allowed yeasts to efficiently assimilate xylose, the second most abundant sugar component of lignocellulosic biomass. During the investigation of xylose utilization by yeasts, a global rewiring of metabolic networks upon xylose cultivation has been captured, as opposed to a pattern of glucose repression. A clear understanding of the xylose-induced metabolic reprogramming in yeast would shed light on the optimization of yeast-based bioprocesses to produce biofuels and chemicals using xylose. In this review, we delved into characteristics of yeast xylose metabolism, and potential benefits of using xylose as a carbon source to produce various biochemicals with examples. Transcriptomic and metabolomic patterns of xylose-grown yeast cells were distinct from those on glucose—a conventional sugar of industrial biotechnology—and the gap might lead to opportunities to produce biochemicals efficiently. Indeed, limited glycolytic metabolic fluxes during xylose utilization could result in enhanced production of metabolites whose biosynthetic pathways compete for precursors with ethanol fermentation. Also, alleviation of glucose repression on cytosolic acetyl coenzyme A (acetyl-CoA) synthesis, and respiratory energy metabolism during xylose utilization enhanced production of acetyl-CoA derivatives. Consideration of singular properties of xylose metabolism, such as redox cofactor imbalance between xylose reductase and xylitol dehydrogenase, is necessary to maximize these positive xylose effects. As a result, this review argues the importance and benefits of xylose utilization as not only a way of expanding a substrate range, but also an effective environmental perturbation for the efficient production of advanced biofuels and chemicals in yeasts.

09 BIOMASS FUELS↗

Stochastic optimization of cellulosic biofuel supply chain incorporating feedstock yield uncertainty

The global goal to reduce dependence on fossil fuels and to mitigate greenhouse gas emissions has resulted in research focused on environment friendly and socio-economically sustainable renewable energy sources. However, commercial production of bio-energy is constrained by biomass supply uncertainty and associated costs. This study presents an integrated approach to determining the optimal biofuel supply chain considering biomass yield uncertainty. A two-stage stochastic mixed integer linear programming is utilized to minimize the expected system cost while incorporating yield uncertainty in the strategic level decisions related to biomass production and biorefinery investment. Applicability of the stochastic model is illustrated through a case study of switchgrass-based biofuel in west Tennessee.

09 BIOMASS FUELS↗

Integrating biomass quality variability in stochastic supply chain modeling and optimization for large-scale biofuel production

The production of biofuels using second-generation feedstocks has been recognized as an important alternative source of sustainable energy and its demand is expected to increase due to regulations such as the Renewable Fuel Standard. However, the pathway to biofuel industry maturity faces unique, unaddressed challenges. Here, to address this challenges, this article presents an optimization model which quantifies and controls the impact of biomass quality variability on supply chain related decisions and technology selection. We propose a two-stage stochastic programming model and associated efficient solution procedures for solving large-scale problems to (1) better represent the random nature of the biomass quality (defined by moisture and ash contents) in supply chain modeling, and (2) assess the impact of these uncertainties on the supply chain design and planning. The proposed model is then applied to a case study in the state of Tennessee. Results show that high moisture and ash contents negatively impact the unit delivery cost since poor biomass quality requires the addition of quality control activities. Experimental results indicate that supply chain cost could increase as much as 27%–31% when biomass quality is poor. We assess the impact of the biomass quality on the topological supply chain. Our case study indicates that biomass quality impacts supply chain costs; thus, it is important to consider the impact of biomass quality in supply chain design and management decisions.

09 BIOMASS FUELS↗

Better management practices for environmentally sustainable production of microalgae and algal biofuels

The commercialization of biofuels produced from microalgae is in its infancy; therefore, many resource-management practices and production processes are still flexible. The purpose of this paper is to guide development of supply chains toward more environmentally sustainable practices. Furthermore, in this work, we review current and projected technologies and practices for autotrophic microalgae cultivation that promote environmental sustainability. We develop a framework that leverages these studies to propose better management practices (BMPs) for water quality and quantity, biodiversity, or greenhouse gas emissions in concert with productivity and profitability considerations. Some proposed BMPs are linked to numerical environmental targets, such as percent reductions in nutrient loadings to streams, whereas others seek to avoid thresholds leading to adverse health or ecological effects. Still others involve using the best available technologies, developed iteratively through life-cycle and techno-economic analyses. Proposed BMPs for microalgae cultivation focus on water quality and quantity, as well as improving greenhouse gas (GHG) emissions to obtain advanced biofuel designation. BMPs must allow producers to meet productivity and profitability targets, as well as environmental targets. These example BMPs characterize the state of science and engineering; thus, they will change over time.

09 BIOMASS FUELS↗

Influence of particle size on NIR spectroscopic characterization of sorghum biomass for the biofuel industry

NIR spectroscopy is a rapid and accurate green technology for high-throughput biomass characterization, including sorghum (Sorghum bicolor), a promising energy crop for the biofuel industry. This study assessed the influence of particle size on NIR spectroscopic analysis (wavelength range: 867–2535 nm) of sorghum biomass composition. Grown under field conditions, a total of 113 types of genetically diverse sorghum accessions were dried, ground, and sieved (<250, 250–600, 600–850, and > 850 µm particle size) for developing partial least square regression (PLSR) prediction models for moisture, ash, extractive, glucan, xylan, acid-soluble lignin (ASL), acid-insoluble lignin (AIL), and total lignin (ASL + AIL). Overall, smaller particle sizes provided better model performance, while no single particle size provided the best performance for all the selected components. With only 9 selected bands and 4 latent variables (LVs), the best PLSR model was obtained for moisture with particle size of 600–850 µm with the square root of the coefficient of determination (R) of 0.85, the ratio of prediction to deviation (RPD) of 2.2, and the root mean square error (RMSE) of 0.46 % in external validation. Similar model performances were also obtained for ash, extractive, glucan, and xylan. This study showed that size reduction could effectively improve NIR spectroscopic analysis for lipid-producing sorghum biomass for the biofuel industry.

09 BIOMASS FUELS↗

Comparison of biofuel life-cycle GHG emissions assessment tools: The case studies of ethanol produced from sugarcane, corn, and wheat

The use of alternative fuels, particularly bio-based fuels, has been an important strategy to achieve greenhouse gas (GHG) emission reductions compared to petroleum-based fuels. However, discrepancies between results obtained by using different attributional life-cycle assessment (LCA) tools have challenged the credibility of the individual assessments, and as result, the progress towards or compliance with GHG mitigation targets. The objective of this study was to identify the main differences and commonalities in methodological structures, calculation procedures, and assumptions for the major commercial biofuel, ethanol, across three public LCA tools, BioGrace (EU), GHGenius (Canada), and GREET (U.S.), and a research-oriented fourth, the Virtual Sugarcane Biorefinery (VSB), a Brazilian platform for sugarcane ethanol assessments. The calculated emissions across models ranged from 16 to 45 for sugarcane, 43-62 for corn, and 45-68 g CO 2 eq MJ -1 for wheat ethanol. Harmonizing the three public models with VSB assumptions for sugarcane ethanol produced in Brazil, the range was reduced to 16-17 g CO 2 eq MJ -1 for sugarcane ethanol. Agricultural production (e.g., N 2 O emissions from fertilizers; energy and fuel use; straw field-burning; and limestone application) and ethanol shipping were found to be the major causes for variations for differences calculated for sugarcane ethanol. Similarly, harmonizing BioGrace and GHGenius calculations using GREET assumptions for U.S. corn ethanol generated nearly identical results (models varied within a 3% range). The coproduct treatment method was found to be the most influential parameter in the variations calculated for both corn and wheat ethanol. The application of the tools as part of GHG emissions accounting requirements is often defined via regulations and differences and/or conflicting assumptions set-forth in these models lead to most differences observed. Our study provides recommendations for promoting transparency in LCA calculations and assumptions across the tools used in research and development or for regulatory tools regarding biofuels.

09 BIOMASS FUELS↗

Multifunctional landscapes for dedicated bioenergy crops lead to low-carbon market-competitive biofuels

Switchgrass is a promising feedstock for cellulosic biorefineries, due to its ability to maintain comparatively high biomass yields across a wide range of soil and climatic conditions. However, there is an incomplete understanding of the economic and environmental tradeoffs associated with cultivating switchgrass on low-productivity land for conversion to biofuels. This study surveys prior literature and demonstrates a new integrated assessment framework, including agroecosystem, ecosystem services valuation, technoeconomic, and life-cycle assessment models, to quantify and contextualize the economic and environmental impacts of switchgrass cultivation on marginal land with downstream conversion to biofuels. Monetizing and incorporating the value of ecosystem services, such as improved water quality benefits from nitrate and sediment reductions, climate change mitigation benefits from CO 2 emission reduction, and recreational and pollination benefits from increased biodiversity, the modeled multifunctional landscape reduces the ethanol production cost by 33.3–58.9 cents/$\scriptsize{L}$-gasoline-equivalent ($\$$1.3–2.2/gge). Planting switchgrass in low productivity land improves soil health, resulting in the carbon footprint reduction credit of 12.8–20.2 gCO 2e /MJ. For an improved switchgrass-to-ethanol conversion pathway with the maximum benefits from ecosystem services, the minimum ethanol selling price and carbon footprint of ethanol, respectively, could reach to 31 cents/$\scriptsize{L}$-gasoline-equivalent (47% reduction relative to average gasoline price) and 3 gCO 2e /MJ (97% reduction relative to gasoline). In conclusion, this low carbon renewable ethanol leads to substantial State and/or Federal policy incentives (~$\$$1/$\scriptsize{L}$-gasoline-equivalent) providing a large benefit to biorefinery operators, farmers, and the public as a whole.

09 BIOMASS FUELS↗

A spent coffee grounds based biorefinery for the production of biofuels, biopolymers, antioxidants and biocomposites

Highlights: • Spent coffee grounds is used as a resource for the preparation of biofuels and value added products. • In-situ transesterification of spent coffee grounds show high biodiesel yield. • Biopolymer, biosorbent, antioxidant, and biocomposite are obtained from spent coffee grounds. • A biorefinery based on spent coffee grounds will positively impact the biobased economy. • Circular economy concept can be applied to spent coffee grounds valorisation. - Abstract: Spent coffee grounds are composed of lipid, carbohydrates, carbonaceous, and nitrogen containing compounds among others. Using n-hexane and n-hexane/isopropanol mixture highest oil yield was achived during soxhlet extraction of oil from spent coffee grounds. Alternatively, supercritical carbon dioxide can be employed as a green solvent for the extraction of oil. Using advanced chemical and biotechnological methods, spent coffee grounds are converted to various biofuels such as, biodiesel, renewable diesel, bioethanol, bioethers, bio-oil, biochar, and biogas. The in-situ transesterification of spent coffee grounds was carried out in a large scale (4 kg), which led to 80–83% biodiesel yield. In addition, a large number of value added and diversified products viz. polyhydroxyalkanoates, biosorbent, activated carbon, polyol, polyurethane foam, carotenoid, phenolic antioxidants, and green composite are obtained from spent coffee grounds. The principles of circular economy are applied to develop a sustanaible biorefinery based on valorisation of spent coffee grounds.

09 BIOMASS FUELS↗

The social inefficiency of regulating indirect land use change due to biofuels

Efforts to reduce the indirect land use change (ILUC) -related carbon emissions caused by biofuels has led to inclusion of an ILUC factor as a part of the carbon intensity of biofuels in a Low Carbon Fuel Standard. While previous research has provided varying estimates of this ILUC factor, there has been no research examining the economic effects and additional carbon savings from including this factor in implementing a Low Carbon Fuel Standard. In this article we show that inclusion of an ILUC factor in a national Low Carbon Fuel Standard led to additional abatement of cumulative emissions over 2007–2027 by 1.3 to 2.6% (0.6–1.1 billion mega-grams carbon-dioxide-equivalent (Mg CO 2 e -1 ) compared to those without an ILUC factor, depending on the ILUC factors utilized. The welfare cost to the US of this additional abatement ranged from 61 dollars to 187 dollars Mg CO 2 e -1 and was substantially greater than the social cost of carbon of $50 Mg CO 2 e -1 .

09 BIOMASS FUELS↗

Acid-Catalyzed Algal Biomass Pretreatment for Integrated Lipid and Carbohydrate-Based Biofuels Production

One of the major challenges associated with algal biofuels production in a biorefinery-type setting is improving biomass utilization in its entirety, increasing the process energetic yields and providing economically viable and scalable co-product concepts. We demonstrate the effectiveness of a novel, integrated technology based on moderate temperatures and low pH to convert the carbohydrates in wet algal biomass to soluble sugars for fermentation, while making lipids more accessible for downstream extraction and leaving a protein-enriched fraction behind. We studied the effect of harvest timing on the conversion yields, using two algal strains; Chlorella and Scenedesmus, generating biomass with distinctive compositional ratios of protein, carbohydrate, and lipids. We found that the late harvest Scenedesmus biomass had the maximum theoretical biofuel potential at 143 gasoline gallon equivalent (GGE) combined fuel yield per dry ton biomass, followed by late harvest Chlorella at 128 GGE per ton. Our experimental data show a clear difference between the two strains, as Scenedesmus was more successfully converted in this process with a demonstrated 97 GGE per ton. Our measurements indicated a release of >90% of the available glucose in the hydrolysate liquors and an extraction and recovery of up to 97% of the fatty acids from wet biomass. Techno-economic analysis for the combined product yields indicates that this process exhibits the potential to improve per-gallon fuel costs by up to 33% compared to a lipids-only process for one strain, Scenedesmus, grown to the mid-point harvest condition.

09 BIOMASS FUELS↗

One-pot integrated biofuel production using low-cost biocompatible protic ionic liquids

The transformation of biomass into liquid fuels is of great importance. Previous work has demonstrated the capability of specific ionic liquids (ILs), such as 1-ethyl-3-methylimidazolium acetate ([C(2)C(1)Im][OAc]) and cholinium lysinate ([Ch][Lys]), to be effective biomass pretreatment solvents. Using these ILs for an integrated biomass-to-biofuel configuration is still challenging due to a significant water-wash related to the high toxicity of [C(2)C(1)Im][OAc] and pH adjustment prior to saccharification for the highly basic [Ch][Lys]. In this work, we demonstrate, for the first time, that a one-pot integrated biofuel production is enabled by a low cost (similar to$1 per kg) and biocompatible protic IL (PIL), ethanolamine acetate, without pH adjustments, water-wash and solid-liquid separations. After pretreatment, the whole slurry is directly used for simultaneous saccharification and fermentation (SSF) with commercial enzyme cocktails and wild type yeast strains, generating 70% of the theoretical ethanol yield (based on switchgrass). The structure-performance relationships of PILs in terms of lignin removal, net basicity, and pH value are systematically studied. A technoeconomic analysis (TEA) revealed that an integrated biorefinery concept based on this PIL process could potentially reduce the minimum ethanol selling price by more than 40% compared to scenarios that require pH adjustment prior to SSF. Improvement of the economic performance will be made by reducing the dilution and enzyme loading during SSF as identified by TEA. This study demonstrates the impact of a biocompatible IL in terms of process optimization and conversion efficiency, and opens up avenues for realizing an IL based efficiently integrated biomass conversion technology.

(ECO)TOXICITY↗

Nitrogen fertilization challenges the climate benefit of cellulosic biofuels

Cellulosic biofuels are intended to improve future energy and climate security. Nitrogen (N) fertilizer is commonly recommended to stimulate yields but can increase losses of the greenhouse gas nitrous oxide (N 2 O) and other forms of reactive N, including nitrate. We measured soil N2O emissions and nitrate leaching along a switchgrass ( Panicum virgatum ) high resolution N-fertilizer gradient for three years post-establishment. Results revealed an exponential increase in annual N2O emissions that each year became stronger (R 2 > 0.9, P < 0.001) and deviated further from the fixed percentage assumed for IPCC Tier 1 emission factors. Concomitantly, switchgrass yields became less responsive each year to N fertilizer. Nitrate leaching (and calculated indirect N2O emissions) also increased exponentially in response to N inputs, but neither methane (CH4) uptake nor soil organic carbon changed detectably. Overall, N fertilizer inputs at rates greater than crop need curtailed the climate benefit of ethanol production almost two-fold, from a maximum mitigation capacity of–5.71 ± 0.22 Mg CO 2 e ha –1 yr –1 in switchgrass fertilized at 56 kgNha –1 to only –2.97 ± 0.18 MgCO 2 e ha –1 yr –1 in switchgrass fertilized at 196 kgNha –1 . In conclusion, minimizing N fertilizer use will be an important strategy for fully realizing the climate benefits of cellulosic biofuel production.

09 BIOMASS FUELS↗

Propelling sustainable energy: Multi-omics analysis of pennycress FATTY ACID ELONGATION1 knockout for biofuel production

Abstract The aviation industry’s growing interest in renewable jet fuel has encouraged the exploration of alternative oilseed crops. Replacing traditional fossil fuels with a sustainable, domestically sourced crop can substantially reduce carbon emissions, thus mitigating global climate instability. Pennycress (Thlaspi arvense L.) is an emerging oilseed intermediate crop that can be grown during the offseason between maize (Zea mays) and soybean (Glycine max) to produce renewable biofuel. Pennycress is being domesticated through breeding and mutagenesis, providing opportunities for trait enhancement. Here, we employed metabolic engineering strategies to improve seed oil composition and bolster the plant's economic competitiveness. FATTY ACID ELONGATION1 (FAE1) was targeted using CRISPR-Cas 9 gene editing to eliminate very long chain fatty acids (VLCFAs) from pennycress seed oil, thereby enhancing its cold flow properties. Through an integrated multiomics approach, we investigated the impact of eliminating VLCFAs in developing and mature plant embryos. Our findings revealed improved cold-germination efficiency in fae1, with seedling emergence occurring up to 3 d earlier at 10 °C. However, these alterations led to a tradeoff between storage oil content and composition. Additionally, these shifts in lipid biosynthesis were accompanied by broad metabolic changes, such as the accumulation of glucose and ADP-glucose quantities consistent with increased starch production. Furthermore, shifts to shorter FA chains triggered the upregulation of heat shock proteins, underscoring the importance of VLCFAs in stress signaling pathways. Overall, this research provides crucial insights for optimizing pennycress seed oil while preserving essential traits for biofuel applications.

Rasoul, Amira (ORCID:0009000714290175)↗